Effects of 2‐hydroxyalkyl methacrylates on the styrene miniemulsion polymerizations stabilized by SDS and alkyl methacrylates

The effects of 2‐hydroxyalkyl methacrylates (HEMA and HPMA) on the styrene miniemulsion polymerizations stabilized by SDS/lauryl methacrylate (LMA) or SDS/stearyl methacrylate (SMA) were investigated. A mixed mode of particle nucleation (monomer droplet nucleation and homogeneous nucleation) is operative during polymerization. Homogeneous nucleation plays a crucial role in the polymerizations stabilized by SDS/LMA, whereas monomer droplet nucleation becomes more important in the polymerizations stabilized by SDS/SMA. The polymerization kinetics is insensitive to the type of 2‐hydroxyalkyl methacrylates, but the difference in the relative importance of monomer droplet nucleation and homogeneous nucleation is detected. Incorporation of 1‐pentanol (C₅OH) into the reaction mixture also shows a significant influence on the polymerizations stabilized by SDS/LMA or SDS/SMA. This is attributed to the formation of a close‐packed structure of SDS and C₅OH on the droplet surface, which acts as a barrier to the incoming oligomeric radicals. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3188–3199, 2000     

Tetrylenes chelated by bifunctional β‐diketiminate ligand: structure and possible applications

The synthesis and structure of heteroleptic tetrylenes containing bifunctional β‐diketiminate ligand are reported. Compounds were prepared via a protolytic reaction of free β‐diketimine {N‐[(2‐MeO)C₆H₅]}N═C(Me)CH═C(Me)N(H){N′‐[(2‐MeO)C₆H₅]} (L^COH) and {N‐[(2‐MeO)C₆H₅]}N?CHCH?CHN(H){N′‐[(2‐MeO)C₆H₅]} (L^HOH), respectively, with corresponding bis(amide) – M[N(SiMe₃)₂]₂ (M = Ge, Sn, Pb) – in equimolar ratio or via the salt elimination route from lithium precursors generated from L^HOH/L^COH species and slight excess of SnCl₂ or GeCl₂.dioxane complex. Only heteroleptic complexes were obtained by the mentioned methods. Products were characterized by multinuclear NMR spectroscopy techniques and structures of four of them have been determined by X‐ray diffraction methods. Complexes L^HOGeCl and L^COSnN(SiMe₃)₂ crystallize as monomers with the three‐coordinated metal centres by one chloro or amido ligand and one bidentate β‐diketiminato unit, in contrast to the structure of L^COSnCl, which reveals a dimeric character and compound L^COPbN(SiMe₃)₂, where the central atom of lead is five‐coordinated by methoxy groups of the ligand. Complex L^COSnN(SiMe₃)₂ was tested as a catalyst for polymerization of various epoxides_. Copyright © 2014 John Wiley & Sons, Ltd.     

Nickel (II) complexes supported by a fluorinated β‐diketiminate backbone ligand: synthesis,catalytic activity toward norbornene polymerization,and the oxygenated species

The reaction of the lithium salt of backbone fluorinated β‐diketiminate ligands, ArNC(CF₃)CHC(CF₃) NArLi, with trans‐[NiCl(Ph)(PPh₃)₂] gives nickel (II) complexes, ArNC(CF₃)CHC(CF₃)NAr(Ph) (PPh₃)Ni (Ar = 2, 6‐Me₂C₆H₃: 1 ; 2, 6‐ⁱPr₂C₆H₃: 2 ). When activated by methylaluminoxane (MAO), both complexes polymerize norbornene rapidly via a vinyl‐type polymerization mechanism. Treatment of nickel complex 1 with oxygen gives rise to intramolecular aerobic hydroxylation. The oxygenated species 3 was characterized by X‐ray crystallography. Copyright © 2006 John Wiley & Sons, Ltd.     

Cobalt complex bearing β‐ketoamine ligand: syntheses,structure, catalytic behavior for styrene and methyl methacrylate polymerization

Cobalt complex based on β‐ketoamine ligand [(Z)‐4‐((2,5‐dimethylphenylamino) (phenyl)methylene)‐3‐methyl‐1‐phenyl‐1H‐pyrazol‐5(4H)‐one] was successfully synthesized. The produced catalyst showed satisfactory activities in the cobalt‐mediated radical polymerization of styrene and methyl methacrylate with the common initiator of AIBN. The resulting polymerizations have the characteristics of living radical polymerization and displayed a nearly linear correlation between the number‐average molecular weight and monomer conversion. Low polydispersity was obtained for all polymerizations, and the polydispersity index decreased with the increase of conversion. These improvements facilitate the implementation of styrene and methacrylate cobalt‐mediated radical polymerization, and open the door to the scale‐up of the process. Copyright © 2014 John Wiley & Sons, Ltd.     

α‐Cyanobenzyl dithioester reversible addition–fragmentation chain‐transfer agents for controlled radical polymerizations

A series of new reversible addition–fragmentation chain transfer (RAFT) agents with cyanobenzyl R groups were synthesized. In comparison with other dithioester RAFT agents, these new RAFT agents were odorless or low‐odor, and this made them much easier to handle. The kinetics of methyl methacrylate radical polymerizations mediated by these RAFT agents were investigated. The polymerizations proceeded in a controlled way, the first‐order kinetics evolved in a linear fashion with time, the molecular weights increased linearly with the conversions, and the polydispersities were very narrow (～1.1). A poly[(methyl methacrylate)‐block‐polystyrene] block copolymer was prepared (number‐average molecular weight = 42,600, polydispersity index = 1.21) from a poly(methyl methacrylate) macro‐RAFT agent. These new RAFT agents also showed excellent control over the radical polymerization of styrenics and acrylates. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1535–1543, 2005     

Dinuclear Rare‐Earth Metal Alkyl Complexes Supported by Indolyl Ligands in μ‐η2:η1:η1 Hapticities and their High Catalytic Activity for Isoprene 1,4‐cis‐Polymerization

Two series of new dinuclear rare‐earth metal alkyl complexes supported by indolyl ligands in novel μ‐η²:η¹:η¹ hapticities are synthesized and characterized. Treatment of [RE(CH₂SiMe₃)₃(thf)₂] with 1 equivalent of 3‐(tBuN?CH)C₈H₅NH ( L₁ ) in THF gives the dinuclear rare‐earth metal alkyl complexes trans‐[(μ‐η²:η¹:η¹‐3‐{tBuNCH(CH₂SiMe₃)}Ind)RE(thf)(CH₂SiMe₃)]₂ (Ind=indolyl, RE=Y, Dy, or Yb) in good yields. In the process, the indole unit of L₁ is deprotonated by the metal alkyl species and the imino C?N group is transferred to the amido group by alkyl CH₂SiMe₃ insertion, affording a new dianionic ligand that bridges two metal alkyl units in μ‐η²:η¹:η¹ bonding modes, forming the dinuclear rare‐earth metal alkyl complexes. When L₁ is reduced to 3‐(tBuNHCH₂)C₈H₅NH ( L₂ ), the reaction of [Yb(CH₂SiMe₃)₃(thf)₂] with 1 equivalent of L₂ in THF, interestingly, generated the trans‐[(μ‐η²:η¹:η¹‐3‐{tBuNCH₂}Ind)Yb(thf)(CH₂SiMe₃)]₂ (major) and cis‐[(μ‐η²:η¹:η¹‐3‐{tBuNCH₂}Ind)Yb(thf)(CH₂SiMe₃)]₂ (minor) complexes. The catalytic activities of these dinuclear rare‐earth metal alkyl complexes for isoprene polymerization were investigated; the yttrium and dysprosium complexes exhibited high catalytic activities and high regio‐ and stereoselectivities for isoprene 1,4‐cis‐polymerization.     

ATRP/OMRP/CCT Interplay in Styrene Polymerization Mediated by Iron(II) Complexes: A DFT Study of the α‐Diimine System

A DFT study of various model systems has addressed the interference of catalytic chain transfer (CCT) as a function of the R² substituent in the atom‐transfer radical polymerization (ATRP) of styrene catalyzed by [FeCl₂(R¹N?C(R²)?C(R²)?NR¹)] complexes. All model systems used R¹=CH₃ in place of the experimental Cy and tBu substituents and 1‐phenylethyl in place of the polystyrene (PS) chain. A mechanistic investigation of 1) ATRP activation, 2) radical trapping in organometallic‐mediated radical polymerization (OMRP), and 3) pathways to the hydride CCT intermediate was conducted with a simplified system with R²=H. This study suggests that CCT could occur by direct hydrogen‐atom transfer without any activation barrier. Further analysis of more realistic models with R²=p‐C₆H₄F or p‐C₆H₄NMe₂ suggests that the electronic effect of the aryl para substituents significantly alters the ATRP activation barrier. Conversely, the hydrogen‐atom‐transfer barrier is essentially unaffected. Thus, the greater ATRP catalytic activity of the p‐NMe₂ system makes the background CCT process less significant. The DFT study also compares the [FeCl₂(R¹N?C(R²)?C(R²)?NR¹)] systems with a diaminobis(phenolato) derivative for which the CCT process shows even greater accessibility but has less incidence because of faster ATRP chain growth and interplay with a more efficient OMRP trapping. The difference between the two systems is attributed to destabilization of the Fe^II catalyst by the geometric constraints of the tetradentate diaminobis(phenolato) ligand.     

The ligand effect in Ti‐mediated living radical styrene polymerizations initiated by epoxide radical ring opening. 2. Scorpionate and half‐sandwich LTiCl3 complexes

The ligand effect and the reaction conditions for the living radical polymerization of styrene initiated by epoxide radical ring opening was investigated in a series of piano‐stool, Ti(IV) scorpionate and, half‐sandwich metallocenes (LTiCl₃; L = Tp, Cp*, Ind and Cp, where Tp = hydrotris(pyrazol‐1‐ylborato), Cp* = pentamethylcyclopentadienyl, Ind = indenyl and Cp = cyclopentadienyl). The polymerization is mediated by the reversible termination of the growing chains with Ti(III) species derived from Zn reduction of parent Ti(IV) derivatives. A poor performance was observed for TpTiCl₃ because of probable over‐reduction. The strong electron donating effect of Cp* accounts for a strong C? Ti chain end bond and consequently, a living‐like process is observed only at T > 110 °C. However, both Ind and Cp ligands provide a linear dependence of M_n on conversion and narrow polydispersity over a wide range of experimental conditions. Investigation of the effect of temperature and reagent ratios generates an optimum for epoxide/CpTiCl₃/Zn = 1/2/4 at 70–90 °C. On the basis of a combination of steric and electronic properties, the ligands rank as Cp ≥ Ind ? Cp* ? Tp. This trend is different from coordination polymerization, and in conjunction with our previous results on Cp₂TiCl₂, further supports a radical mechanism. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 6039–6047, 2005     

Novel nickel (II) complexes chelating β‐diketiminate ligands: synthesis and simultaneous polymerization and oligomerization of ethylene

Two novel nickel (II) complexes, CH{C(CF₃)NAr}₂NiBr ( 1 , Ar = 2,6‐ⁱPr₂C₆H₃ and 2 , 2,6‐Me₂C₆H₃), were synthesized by the reaction of the lithium salt of fluorinated β‐diketiminate backbone ligands with (1,2‐dimethoxyethane) nickel (II) bromide [(DME)NiBr₂]. The solid‐state structure of nickel (II) complex 2 as a dimer reveals four‐coordination and a tetrahedral geometry with bromide bridged by single crystal X‐ray measurement. Both complexes catalyze simultaneous polymerization and oligomerization of ethylene when activated by methylaluminoxane (MAO). It was found that the reaction temperature has a pronounced effect on the activity of ethylene polymerization and the molecular weight of obtained polyethylene. In addition, the nickel catalytic systems predominantly produce linear polyethylene with unsaturated end groups. Copyright © 2006 John Wiley & Sons, Ltd.     

Vinyl polymerization of norbornene by nickel(II) complexes bearing β‐diketiminate ligands

Norbornene polymerizations were carried out using nickel(II) bromide complexes CH{C(R)NAr}₂NiBr ( 1 , R = CH₃, Ar = 2, 6 ? ⁱPr₂C₆H₃; 2 , R = CH₃, Ar = 2, 6‐Me₂C₆H₃; 3 , R = CF₃, Ar = 2, 6 ? ⁱPr₂C₆H₃; 4 , R = CF₃, Ar = 2, 6‐Me₂C₆H₃) in the presence of methylaluminoxane. Compound 3 is the most active norbornene polymerization catalyst of all the nickel complexes tested. The activity of theses catalysts increases with increases in steric bulk of the substituents on the aryl rings. The electronic nature of the ligand backbone also affects the activity. The resulting polynorbornenes are vinyl type by IR and NMR analyses. Copyright © 2007 John Wiley & Sons, Ltd.     

A novel hydrophobic copper complex supported on γ‐Fe2O3 as a magnetically heterogeneous catalyst for one‐pot three‐component synthesis of α‐aminophosphonates

A novel hydrophobic copper complex supported on γ‐Fe₂O₃ is synthesized and characterized by different methods such as FT‐IR, XRD, TEM, SEM, TGA, VSM, ICP and CHN analysis. It was used as a magnetically recyclable heterogeneous catalyst for the efficient synthesis of α‐aminophosphonates via a one‐pot three‐component reaction under solvent‐free conditions. The present catalytic system worked extremely well for the synthesis of α‐aminophosphonates even up to five subsequent trails without significant loss of its catalytic activity or copper leaching. The TEM image and FT‐IR spectrum of the catalyst after five times recovery showed that the structure of the catalyst was stable under the reaction conditions with no change being observed. The strong magnetic properties of the reused catalyst were revealed by complete and easy attraction using an external magnet and also by VSM curve. This work represents the first and unique example of a hydrophobic copper complex for catalysis in water generating reactions.     

Kinetics of methyl methacrylate and n‐butyl acrylate copolymerization mediated by 2‐cyanoprop‐2‐yl dithiobenzoate as a RAFT agent

The RAFT (co)polymerization kinetics of methyl methacrylate (MMA) and n‐butyl acrylate (BA) mediated by 2‐cyanoprop‐2‐yl dithiobenzoate was studied with various RAFT concentrations and monomer compositions. The homopolymerization of MMA gave the highest rate. Increasing the BA fraction f_BA dramatically decreased the copolymerization rate. The rate reached the lowest point at f_MMA ～ 0.2. This observation is in sharp contrast to the conventional RAFT‐free copolymerization, where BA homopolymerization gave the highest rate and the copolymerization rate decreased monotonously with increasing f_MMA. This peculiar phenomenon can be explained by the RAFT retardation effect. The RAFT copolymerization rate can be described by 〈R_p〉/〈R_p〉₀ = (1 + 2(〈k_c〉/〈k_t〉)〈K〉)[RAFT]₀)^?0.5, where 〈R_p〉₀ is the RAFT‐free copolymerization rate and 〈K〉 is the apparent addition–fragmentation equilibrium coefficient. A theoretical expression of 〈K〉 based on a terminal model of addition and fragmentation reactions was derived and successfully applied to predict the RAFT copolymerization kinetics with the rate parameters obtained from the homopolymerization systems. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3098–3111, 2007     

Titanium tetrachloride supported on atom transfer radical polymerized poly(methyl acrylate‐co‐1‐octene) as catalyst for ethylene polymerization

Ethylene polymerizations were performed using catalyst based on titanium tetrachloride (TiCl₄) supported on synthesized poly(methyl acrylate‐co‐1‐octene) (PMO). Three catalysts were synthesized by varying TiCl₄/PMO weight ratio in chlorobenzene resulting in incorporation of titanium in different percentage as determined by UV‐vis spectroscopy. The coordination of titanium with the copolymer matrix was confirmed by FTIR studies. The catalysts morphology as observed by SEM was found to be round shaped with even distributions of titanium and chlorine on the surface of catalyst. Their performance was evaluated for atmospheric polymerization of ethylene in n‐hexane using triethylaluminum as cocatalyst. Catalyst with titanium incorporation corresponding to 2.8 wt % showed maximum activity. Polyethylenes obtained were characterized for melting temperature, molecular weight, morphology and microstructure. The polymeric support utilized for TiCl₄ was synthesized using activators regenerated by electron transfer (ARGET) Atom Transfer Radical Polymerization (ATRP) of methyl acrylate (MA) and 1‐octene (Oct) with Cu(0)/CuBr₂/tris(2‐(dimethylamino)ethyl)amine (Me₆TREN) as catalyst and ethyl 2‐bromoisobutyrate (EBriB) as initiator at 80 °C. The copolymer poly(methyl acrylate‐1‐octene; PMO) obtained showed monomodal curve in Gel Permeation Chromatography (GPC) with polydispersity of 1.37 and copolymer composition (¹H NMR; F_MA) of 0.75. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7299–7309, 2008     

Poly(styrene‐co‐glycerol dimethacrylate): Synthesis,characterization, and application as a resin for gel‐phase peptide synthesis

An efficient cross‐linked polymer support for solid‐phase synthesis was prepared by introducing glycerol dimethacrylate cross‐linker to polystyrene network using free radical aqueous suspension polymerization. The support was characterized by various spectroscopic methods. Morphological feature of the resin was analyzed by microscopy. The polymerization reaction was investigated with respect to the effect of amount of cross‐linking agent, which in turn vary the swelling, loading, and the mechanical stability of the resin. The solvent uptake of the polymer was studied in relation to cross‐linking and compared with Merrifield resin. The stability of the resin was tested in different synthetic conditions used for solid‐phase peptide synthesis. Hydroxy group of the support was derivatized to chloro and then amino groups using different reagents and reaction conditions. Efficiency of the support was tested and compared with TentaGel? resin by following different steps involved in the synthesis of the 65–74 fragment of acyl carrier protein. The results showed that the poly(styrene‐co‐glycerol dimethacrylate) (GDMA‐PS) is equally efficient as TentaGel resin in peptide synthesis. The purity of the peptides was analyzed by HPLC and identities were determined by mass spectroscopy and amino acid analysis. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4382–4392, 2005     

Isoprene–Styrene Chain Shuttling Copolymerization Mediated by a Lanthanide Half‐Sandwich Complex and a Lanthanidocene: Straightforward Access to a New Type of Thermoplastic Elastomers

A lanthanide half‐sandwich complex and a ansa lanthanidocene have been assessed for isoprene–styrene chain shuttling copolymerization with n‐butylethylmagnesium (BEM). In the presence of 1 equiv BEM, a fully amorphous multiblock microstructure of soft and hard segments is achieved. The microstructure consists of poly(isoprene‐co‐styrene) blocks, with hard blocks rich in styrene and soft blocks rich in isoprene. The composition of the blocks and the resulting glass transition temperatures (T_g) can be easily modified by changing the feed and/or the relative amount of the catalysts, highlighting a new class of thermoplastic elastomers (TPEs) with tunable transition temperatures. The materials self‐organize into nanostructures in the solid state.     

Bis(β‐diketiminato) lanthanide amides: synthesis,structure and catalysis for the polymerization of l‐lactide and ε‐caprolactone

Treatment of the chlorides (L^2,6‐iPr2_Ph)₂LnCl (L^2,6‐iPr2_Ph = [(2,6‐ⁱPr₂C₆H₃)NC(Me)CHC(Me)N(C₆H₅)]^?) with 1 equiv. of NaNH(2,6‐ⁱPr₂C₆H₃) afforded the monoamides (L^2,6‐iPr2_Ph)₂LnNH(2,6‐ⁱPr₂C₆H₃) (Ln = Y ( 1 ), Yb ( 2 )) in good yields. Anhydrous LnCl₃ reacted with 2 equiv. of NaL^2,6‐iPr2_Ph in THF, followed by treatment with 1 equiv. of NaNH(2,6‐ⁱPr₂C₆H₃), giving the analogues (L^2,6‐iPr2_Ph)₂LnNH(2,6‐ⁱPr₂C₆H₃) (Ln = Sm ( 3 ), Nd ( 4 )). Two monoamido complexes stabilized by two L^2‐Me ligands, (L^2‐Me)₂LnNH(2,6‐ⁱPr₂C₆H₃) (L^2‐Me = [N(2‐MeC₆H₄)C(Me)]₂CH)^?; Ln = Y ( 5 ), Yb ( 6 )), were also synthesized by the latter route. Complexes 1 , 2 , 3 , 4 , 5 , 6 were fully characterized, including X‐ray crystal structure analyses. Complexes 1 , 2 , 3 , 4 , 5 , 6 are isostructural. The central metal in each complex is ligated by two β‐diketiminato ligands and one amido group in a distorted trigonal bipyramid. All the complexes were found to be highly active in the ring‐opening polymerization of L‐lactide (L‐LA) and ε‐caprolactone (ε‐CL) to give polymers with relatively narrow molar mass distributions. The activity depends on both the central metal and the ligand (Yb < Y < Sm ≈ Nd and L^2‐Me < L^2,6‐iPr2_Ph). Remarkably, the binary 3/benzyl alcohol (BnOH) system exhibited a striking ‘immortal’ nature and proved able to quantitatively convert 5000 equiv. of L‐LA with up to 100 equiv. of BnOH per metal initiator. All the resulting PLAs showed monomodal, narrow distributions (M_w/M_n = 1.06 ? 1.08), with molar mass (M_n) decreasing proportionally with an increasing amount of BnOH. The binary 4/BnOH system also exhibited an ‘immortal’ nature in the polymerization of ε‐CL in toluene. Copyright © 2014 John Wiley & Sons, Ltd.     

The influence of phenylsilane on the syndiotactic polymerization of styrene with η5‐pentamethylcyclopentadienyl titanium trifluoride

The syndiotactic polystyrene polymerization activity of a fluorinated half‐sandwich complex, η⁵‐pentamethylcyclopentadienyl titanium trifluoride (Cp*TiF₃), in the presence of relatively low amounts of methylalumoxane (MAO; MAO/Cp*TiF₃ molar ratio = 200/1) and triisobutylaluminum, is significantly increased by the addition of phenylsilane in molar ratios to Cp*TiF₃ ranging from about 300/1 to 600/1, if the phenylsilane is added to the monomer. Lower amounts of phenylsilane, such as a 100/1 molar ratio to Cp*TiF₃, lead to a reduced polymerization activity in comparison with styrene without phenylsilane. A prereaction of phenylsilane with the catalyst mixture shows a behavior that is strongly dependent on the storage time of the composition and the temperature. A storage time of about 16 h is sufficient to reduce the polymerization conversion to about half of the original value. The results are discussed on the basis of a chain‐transfer reaction with phenylsilane and several catalyst complexes of different stabilities and activities, including an alkylation product of phenylsilane. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 3476–3485, 2000     

In situ nitroxide‐mediated polymerization of styrene promoted by the N‐tert‐butyl‐α‐isopropylnitrone/bpo pair: ESR investigations

The styrene polymerization initiated by benzoyl peroxide (BPO) in the presence of N‐tert‐butyl‐α‐isopropylnitrone as nitroxide precursor is well‐controlled provided that a prereaction between the nitrone and BPO is carried out in suitable conditions prior to polymerization at a higher temperature. Electron spin resonance (ESR) spectroscopy was implemented to probe the nitroxides formed during both steps, that is, the prereaction and polymerization, and to get crucial information regarding the structure of the nitroxides responsible for the polymerization control. ESR studies combined with first principles calculations have evidenced that nitroxides observed during the prereaction in the presence of styrene and during the polymerization steps consist of a mixture of two macronitroxides. One is formed by the addition of a growing polystyrene chain to the nitrone as would be expected. However, the second one results from the addition of a polystyrene chain to tert‐butyl nitroso that is in situ formed presumably by decomposition of the first macronitroxide type. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013