Construction of a 2D Graphene‐Like MoS2/C3N4 Heterojunction with Enhanced Visible‐Light Photocatalytic Activity and Photoelectrochemical Activity

A novel graphene‐like MoS₂/C₃N₄ (GL‐MoS₂/C₃N₄) composite photocatalyst has been synthesized by a facile ethylene glycol (EG)‐assisted solvothermal method. The structure and morphology of this GL‐MoS₂/C₃N₄ photocatalyst have been investigated by a wide range of characterization methods. The results showed that GL‐MoS₂ was uniformly distributed on the surface of GL‐C₃N₄ forming a heterostructure. The obtained composite exhibited strong absorbing ability in the ultraviolet (UV) and visible regions. When irradiated with visible light, the composite photocatalyst showed high activity superior to those of the respective individual components GL‐MoS₂ and GL‐C₃N₄ in the degradation of methyl orange. The enhanced photocatalytic activity of the composite may be attributed to the efficient separation of electron–hole pairs as a result of the matching band potentials between GL‐MoS₂ and GL‐C₃N₄. Furthermore, a photocatalytic mechanism for the composite material has been proposed, and the photocatalytic reaction kinetics has been measured. Moreover, GL‐MoS₂/C₃N₄ could serve as a novel sensor for trace amounts of Cu²⁺ since it exhibited good selectivity for Cu²⁺ detection in water.     

Facile preparation of Ag/Ag2WO4/g‐C3N4 ternary plasmonic photocatalyst and its visible‐light photocatalytic activity

Introducing plasmonic metals into semiconductor materials has been proven to be an attractive strategy for enhancing photocatalytic activity in the visible region. In this work, a novel and efficient Ag/Ag₂WO₄/g‐C₃N₄ (AACN) ternary plasmonic photocatalyst was successfully synthesized using a facile one‐step in situ hydrothermal method. The composition, structure, morphology and optical absorption properties of AACN were investigated using X‐ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, and UV–visible diffuse reflectance spectroscopy, respectively. Photocatalytic performance of AACN was evaluated via rhodamine B and tetracycline degradation. The results indicated that AACN had excellent photocatalytic performance for rhodamine B degradation with a rate constant of 0.0125 min^?1, which was higher than those of Ag₂WO₄ and Ag/Ag₂WO₄. Characterization and photocatalytic tests showed that the strong coupling effect between the Ag/Ag₂WO₄ nanoparticles and the exfoliated ultrathin g‐C₃N₄ nanosheets was superior for visible‐light responsivity and reduced the recombination rate of photogenerated electrons and holes. A proposed mechanism is also discussed according to the band energy structure and the experimental results.     

Facile fabrication of g‐C3N4/MIL‐53(Al) composite with enhanced photocatalytic activities under visible‐light irradiation

A novel visible‐light‐driven g‐C₃N₄/MIL‐53(Al) composite photocatalyst was successfully prepared using a facile stirring method at room temperature. The g‐C₃N₄/MIL‐53(Al) composites were characterized and their effects on the photocatalytic activities for rhodamine B degradation were investigated. The g‐C₃N₄(20 wt%)/MIL‐53(Al) photocatalyst displayed optimal photocatalytic degradation efficiency, which was about five times higher than the photocatalytic activity of pure g‐C₃N₄. The improved photocatalytic performance of the g‐C₃N₄/MIL‐53(Al) photocatalyst was predominantly attributed to the efficient separation of electron–hole pairs and the low charge‐transfer resistance. g‐C₃N₄/MIL‐53(Al) also exhibited excellent stability and reusability. A proposed mechanism for the enhanced photocatalytic activity is also discussed based on the experimental results. Copyright © 2015 John Wiley & Sons, Ltd.     

Acid‐treated g‐C3N4‐Cu2O composite catalyst with enhanced photocatalytic activity under visible‐light irradiation

Acid‐treated g‐C₃N₄‐Cu₂O was prepared by hydrothermal reduction followed by high temperature calcination and acid exfoliation. The structures and properties of as‐synthesized samples were characterized using a range of techniques, such as X‐ray photoelectron spectroscopy, scanning electron microscopy, Photoluminescence Spectroscopy and the Brunauer–Emmett–Teller (BET) theory. The photocatalytic activity was evaluated by measuring the photodegradation of methyl orange under visible‐light irradiation. Based on the results of TEM, XPS, EPR and other techniques, it was verified that a heterojunction was formed. The acid treatment process can increase the specific surface area to form abundant heterojunction interfaces as channels for photo‐generated carrier separation, thereby enhancing its light utilization and quantum efficiency. Results indicate that acid‐treated g‐C₃N₄‐Cu₂O possesses a large specific surface area, which provides plentiful activated sites for heterojunctions to form; in addition, it showed a high visible light effect and the minimum charge‐transfer resistance. Furthermore, the g‐C₃N₄‐Cu₂O material exhibits high levels of effectiveness and stability. Electron paramagnetic resonance and a series of radical trapping experiments demonstrate that the holes and ?O₂^? could be the main active species in methyl orange photodegradation. This work could provide new insights into the fabrication of composite materials as high‐performance photocatalysts, and facilitate their application in addressing environmental protection issues.     

Carbonyl‐Grafted g‐C3N4 Porous Nanosheets for Efficient Photocatalytic Hydrogen Evolution

Carbonyl‐grafted g‐C₃N₄ porous nanosheets (COCNPNS) were fabricated by means of a two‐step thermal process using melamine and oxalic acid as starting reagents. The combination of melamine with oxalic acid to form a melamine–oxalic acid supramolecule as a precursor is key to synthesizing carbonyl‐grafted g‐C₃N₄. The bulk carbonyl‐grafted g‐C₃N₄ (COCN) was further thermally etched onto porous nanosheets by O₂ under air. In such a process, the carbonyl groups were partly removed and the obtained sample showed remarkably enhanced visible‐light harvesting and promoted the separation and transfer of photogenerated electrons and holes. With its unique porous structure and enhanced light‐harvesting capability, under visible‐light illumination (λ >420 nm) the prepared COCNPNS exhibited a superior photocatalytic hydrogen evolution rate of 83.6 μmol h⁻¹, which is 26 times that of the p‐CN obtained directly from thermal polycondensation of melamine.     

Nanosized Functional MOFs Loading Ag/AgBr with Throughout‐Visible‐Light Absorption for High‐Efficiency Photocatalysis

Porous metal‐organic frameworks (MOFs) loading metal nanoparticles to form a composite photocatalyst demonstrated unique advantages. Modification of the electron donating group on the aromatic linkers of MOFs could increase the absorption range of light, thereby increasing the photocatalytic activity. In this study, we prepared a composite photocatalyst using a stable NH₂‐functionalized MOF (UiO‐66‐NH₂) to load semiconductor Ag/AgBr nanoparticles, and the resultant composites have intense optical absorption throughout visible light range. The greatly enhanced optical absorption and the unique hetero‐junction between Ag/AgBr and UiO‐66‐NH₂ render efficient separation and utilization of photogenerated electron‐hole pairs. Therefore, Ag/AgBr@UiO‐66‐NH₂ showed much more excellent photocatalytic activity, compared with unmodified UiO‐66 loading Ag/AgBr (Ag/AgBr@UiO‐66) and reported AgX@MOF catalysts. Moreover, the composite photocatalysts showed excellent stability during cycling experiment.     

Facile one‐step synthesis of broken case‐like carbon‐doped g‐C3N4 for photocatalytic degradation of benzene

Herein, a novel broken case‐like carbon‐doped g‐C₃N₄ photocatalyst was obtained via a facile one‐pot pyrolysis and cost‐effective method using glyoxal‐modified melamine as a precursor. The obtained carbon/g‐C₃N₄ photocatalyst showed remarkable enhanced photocatalytic activity in the degradation of gaseous benzene compared with that of pristine g‐C₃N₄ under visible light. The pseudo‐first‐order rate constant for gaseous benzene degradation on carbon/g‐C₃N₄ was 0.186 hr^?1, 5.81 times as large as that of pristine g‐C₃N₄. Furthermore, a possible photocatalytic mechanism for the improved photocatalytic performance over carbon/g‐C₃N₄ nanocomposites was proposed.     

Direct Synthesis of Porous Nanorod‐Type Graphitic Carbon Nitride/CuO Composite from Cu–Melamine Supramolecular Framework towards Enhanced Photocatalytic Performance

Facile and direct synthesis of porous nanorod‐type graphitic carbon nitride/CuO composite ( CuO‐g‐C₃N₄ ) has been achieved by using a Cu–melamine supramolecular framework as a precursor. The CuO‐g‐C₃N₄ nanocomposite demonstrated improved visible‐light‐driven photocatalytic activities. The results indicate that metal–melamine supramolecular frameworks can be promising precursors for the preparation of efficient g ‐C₃N₄ nanocomposite photocatalysts.     

Facile fabrication of BUC‐21/g‐C3N4 composites and their enhanced photocatalytic Cr(VI) reduction performances under simulated sunlight

A series of BUC‐21/g‐C₃N₄ composites were facilely fabricated from two‐dimensional metal–organic framework BUC‐21 and two‐dimensional metal‐free polymer semiconductor graphitic carbon nitride (g‐C₃N₄) through ball‐milling, and characterized via powder X‐ray diffraction, Fourier transform infrared spectrometry, thermogravimetric analysis, transmission electron microscopy, and UV–visible diffuse reflectance, X‐ray photoelectron and photoluminescence emission spectrometry. The photocatalytic activities of B100G100 (weight ratio of BUC‐21 to g‐C₃N₄ being 1:1) towards Cr(VI) reduction were investigated upon the irradiation of simulated sunlight and real sunlight, in which the influences of various organic compounds (tartaric acid, citric acid and oxalic acid) as hole scavengers, pH values (2, 3, 4, 5, 6, 7 and 8) and foreign ions (ions in tap water and real surface water) were also investigated. The results revealed that B100G100 exhibited more outstanding photocatalytic Cr(VI) reduction than individual BUC‐21 and g‐C₃N₄, resulting from enhanced separation of photogenerated electrons and holes, which were confirmed via both photoluminescence emission and electrochemical determination. The B100G100 composite exhibited good reusability and stability after several experimental runs. Also, the corresponding mechanism of photocatalytic reaction was proposed.     

Hydrothermal Synthesis of g‐C3N4/NiFe2O4 Nanocomposite and Its Enhanced Photocatalytic Activity

Herein, for the first time, a direct Z‐scheme g‐C₃N₄/NiFe₂O₄ nanocomposite photocatalyst was prepared using facile one‐pot hydrothermal method and characterized using XRD, FT‐IR, DRS, PL, SEM, EDS, TEM, HRTEM, XPS, BET and VSM characterized techniques. The result reveals that the NiFe₂O₄ nanoparticles are loaded on the g‐C₃N₄ sheets successfully. The photocatalytic activities of the as‐prepared photocatalysts were evaluated for the degradation of methyl orange (MO) under visible light irradiation. It was shown that the photocatalytic activity of the g‐C₃N₄/NiFe₂O₄ nanocomposite is about 4.4 and 3 times higher than those of the pristine NiFe₂O₄ and g‐C₃N₄ respectively. The enhanced photocatalytic activity could be ascribed to the formation of g‐C₃N₄/NiFe₂O₄ direct Z‐scheme photocatalyst, which results in efficient space separation of photogenerated charge carriers. More importantly, the as‐prepared Z‐scheme photocatalyst can be recoverable easily from the solution by an external magnetic field and it shows almost the same activity for three consecutive cycles. Considering the simplicity of preparation method, this work will provide new insights into the design of high‐performance magnetic Z‐scheme photocatalysts for organic contaminate removal.     

Solar Hydrogen from an Aqueous,Noble‐Metal‐Free Hybrid System in a Continuous‐Flow Sampling Reaction System

We introduce the visible‐light photocatalytic H₂ evolution reaction as catalyzed by a cobaloxime/carbon nitride (C₃N₄) noble‐metal‐free hybrid photosystem by using a continuous‐flow sampling reaction system. The photocatalytic H₂ evolution rate is highly dependent on the structure of C₃N₄, in which porous C₃N₄ shows the best activity compared with bulk C₃N₄ (lamellar) and C₃N₄ nanosheets. When using porous C₃N₄, the system is neither affected by the solution pH, nor the C₃N₄ concentration, nor the structure of the cobaloxime complex.     

Enhanced Electrocatalytic Performance of a Porous g‐C3N4/Graphene Composite as a Counter Electrode for Dye‐Sensitized Solar Cells

A porous graphitic carbon nitride (g‐C₃N₄)/graphene composite was prepared by a simple hydrothermal method and explored as the counter electrode of dye‐sensitized solar cells (DSCs). The obtained g‐C₃N₄/graphene composite was characterized by XRD, SEM, TEM, FTIR spectroscopy, and X‐ray photoelectron spectroscopy. The results show that incorporating graphene nanosheets into g‐C₃N₄ forms a three‐dimensional architecture with a high surface area, porous structure, efficient electron‐transport network, and fast charge‐transfer kinetics at the g‐C₃N₄/graphene interfaces. These properties result in more electrocatalytic active sites and facilitate electrolyte diffusion and electron transport in the porous framework. As a result, the as‐prepared porous g‐C₃N₄/graphene composite exhibits an excellent electrocatalytic activity. In I^?/I₃^? redox electrolyte, the charge‐transfer resistance of the porous g‐C₃N₄/graphene composite electrode is 1.8 Ω cm², which is much lower than those of individual g‐C₃N₄ (70.1 Ω cm²) and graphene (32.4 Ω cm²) electrodes. This enhanced electrocatalytic performance is beneficial for improving the photovoltaic performance of DSCs. By employing the porous g‐C₃N₄/graphene composite as the counter electrode, the DSC achieves a conversion efficiency of 7.13 %. This efficiency is comparable to 7.37 % for a cell with a platinum counter electrode.     

Plasmonic Ag/AgCl‐modified bismuth subcarbonate with enhanced visible light photocatalytic activity

Plasmonic Ag/AgCl‐modified bismuth subcarbonate (Bi₂O₂CO₃) composites were prepared by a multistep process with hydrothermal, deposition, and photoreduction in the absence of organic capping agents. The properties of the obtained Ag/AgCl/Bi₂O₂CO₃ samples were characterized using X‐ray diffraction, field emission scanning electron microscopy and X‐ray photoelectron, UV–visible diffuse reflectance, and photoluminescence spectroscopies. The results reveal that Ag/AgCl nanoparticles are dispersed on the Bi₂O₂CO₃ surface to achieve plasmonic Ag/AgCl/Bi₂O₂CO₃. The Ag/AgCl/Bi₂O₂CO₃ nanocomposites show improved rhodamine B (RhB) adsorption capacity and photocatalytic activity compared with pure Bi₂O₂CO₃ and Ag/AgCl. In addition, the Ag/AgCl/Bi₂O₂CO₃ composite with 20 wt% Ag/AgCl exhibits the highest photocatalytic activity and remains stable for the photodegradation of RhB under visible light. The enhanced photocatalytic activity of Ag/AgCl/Bi₂O₂CO₃ may be attributed to the surface plasmon resonance effect of in situ generated Ag nanoparticles and synergistic effect of Ag/AgCl and Bi₂O₂CO₃, which increase the separation efficiency of photogenerated electron–hole pairs under visible light irradiation.     

RGO/C_3N_4复合材料的制备及可见光催化性能

通过半封闭一步热裂解法和改进的Hummers法分别制备了类石墨氮化碳(C3N4)和氧化石墨烯(GO),再利用光还原方法制得还原氧化石墨烯/氮化碳(RGO/C3N4)复合材料。采用X射线衍射(XRD),场发射扫描电镜(FESEM),X射线光电子能谱(XPS),紫外-可见漫反射吸收光谱(DRS),光致荧光(PL)和傅里叶变换红外光谱(FTIR)等测试技术对复合材料进行表征。以罗丹明B(RhB)为探针分子在可见光下考察RGO/C3N4复合材料的光催化活性,结果表明:RGO的引入显著提高了C3N4的光催化活性,且6.0%RGO/C3N4复合物的光催化活性最高,可能的原因是RGO具有优良的接受和传导电子性能,抑制了C3N4光生电子-空穴的复合机率,进而提高了光催化活性。     

Facilitating a high‐performance photocatalyst for Suzuki reaction: Palladium nanoparticles immobilized on reduced graphene oxide‐doped graphitic carbon nitride

We prepared a non‐covalently coupled hybrid of reduced graphene oxide (rGO)‐doped graphitic carbon nitride (g‐C₃N₄) by freezing‐assisted assembly and calcination. Fourier transform infrared, Raman and X‐ray photoelectron spectroscopies and transmission electron microscopy confirmed that rGO was incorporated into the bulk g‐C₃N₄, which was an ideal support for loading Pd nanoparticles. The Pd nanoparticles with an average size of 4.57 nm were uniformly dispersed on the rGO‐doped g‐C₃N₄ surface. The layered structure provided large contact area of g‐C₃N₄ with rGO, further accelerating the electron transfer rate and inhibiting electron–hole recombination. Consequently, compared with Pd/rGO/g‐C₃N₄ and Pd/g‐C₃N₄, the Pd/rGO‐doped g‐C₃N₄ showed a prominent catalytic activity for visible‐light‐driven photocatalytic Suzuki–Miyaura coupling at ambient temperature. The Pd/rGO‐doped g‐C₃N₄ exhibited very high stability after six consecutive cycles with minimal loss of catalytic activity.     

RGO/C3N4复合材料的制备及可见光催化性能

通过半封闭一步热裂解法和改进的Hummers法分别制备了类石墨氮化碳(C₃N₄)和氧化石墨烯(GO),再利用光还原方法制得还原氧化石墨烯/氮化碳(RGO/C₃N₄)复合材料。采用X射线衍射(XRD),场发射扫描电镜(FESEM),X射线光电子能谱(XPS),紫外-可见漫反射吸收光谱(DRS),光致荧光(PL)和傅里叶变换红外光谱(FTIR)等测试技术对复合材料进行表征。以罗丹明B(RhB)为探针分子在可见光下考察RGO/C₃N₄复合材料的光催化活性,结果表明：RGO的引入显著提高了C₃N₄的光催化活性,且6.0%RGO/C₃N₄复合物的光催化活性最高,可能的原因是RGO具有优良的传导和接受电子性能,抑制了C₃N₄光生电子-空穴的复合机率,进而提高了光催化活性。     

Tripyridine‐Derivative‐Derived Semiconducting Iodo‐Argentate/Cuprate Hybrids with Excellent Visible‐Light‐Induced Photocatalytic Performance

Through regulating the pH values, a series of iodo‐argentate/cuprate hybrids, [Me₃(4‐TPT)]₄[Ag₆I₁₈] ( 1 , Me₃(4‐TPT)=N,N′,N′′‐trimethyl‐2,4,6‐tris(4‐pyridyl)‐1,3,5‐triazine), [Me₃(4‐TPT)][M₅I₈] (M=Ag/ 2 , Cu/ 2 a ), [Me₃(3‐TPT)][M₅I₈] (Me₃(3‐TPT)=N,N′,N′′‐trimethyl‐2,4,6‐tris(3‐pyridyl)‐1,3,5‐triazine, M=Ag/ 3 , Cu/ 4 ), which exhibit adjustable structural variations with different dimensional structures, have been obtained under solvothermal conditions. They are directed by two types of in situ N‐alkylation TPT‐derivatives (Me₃(4‐TPT) for 1 / 2 / 2 a and Me₃(3‐TPT) for 3 / 4 ) and represent the isolated units ( 1 ), 1D polymeric chain ( 4 ), 2D layered structures ( 2 / 2 a , 3 ) based on diverse metal iodide clusters. These compounds possess reducing band gaps as compared with the bulk β‐AgI and CuI and belong to potential semiconductor materials. Iodocuprates feature highly efficient photocatalytic activity in the sunlight‐induced degradation of organic dyes. The detailed study on the possible photocatalytic mechanism, including radical trapping tests and theoretical calculations, reveals that the N‐alkylation TPT moieties contribute to the narrow semiconducting behavior and effectively inhibit the recombination of photogenerated electron‐hole pairs, which result in an excellent visible‐light‐induced photocatalytic performance.     

Ag nanoparticles loaded on porous graphitic carbon nitride with enhanced photocatalytic activity for degradation of phenol

Highly efficient photocatalyst of visible-light-driven Ag nanoparticles loaded on porous graphitic carbon nitride (g-C₃N₄) was prepared by the reduction of Ag ions on porous g-C₃N₄. The obtained Ag/porous g-C₃N₄ composite products were characterized by X-ray diffraction (XRD), high resolution transmission electron microscopy (HRTEM), UV-vis diffuse reflection spectra (DRS), thermal gravimetric analysis (TGA). The results demonstrated that a homogeneous distribution of Ag NPs of 10 nm was attached onto the surface of the porous g-C₃N₄. The prepared Ag/porous g-C₃N₄ samples were applied for catalyzing the degradation of phenol in water under visible light irradiation. Porous g-C₃N₄ demonstrated an excellent support for the formation and dispersion of small uniform Ag NPs. When the weight percentage of Ag reaches 5%, the nanohybrid exhibits superior photocatalytic activities compared to bulk g-C₃N₄, porous g-C₃N₄, and 2% Ag/porous g-C₃N₄ hybrids. The enhanced photocatalytic performance is due to the synergic effect between Ag and porous g-C₃N₄, which suppressed the recombination of photogenerated electron-hole pairs.     

Ultrathin g‐C3N4 Nanosheets Coupled with AgIO3 as Highly Efficient Heterostructured Photocatalysts for Enhanced Visible‐Light Photocatalytic Activity

The photocatalytic activity of graphite‐like carbon nitride (g‐C₃N₄) could be enhanced by heterojunction strategies through increasing the charge‐separation efficiency. As a surface‐based process, the heterogeneous photocatalytic process would become more efficient if a larger contact region existed in the heterojunction interface. In this work, ultrathin g‐C₃N₄ nanosheets (g‐C₃N₄‐NS) with much larger specific surface areas are employed instead of bulk g‐C₃N₄ (g‐C₃N₄‐B) to prepare AgIO₃/g‐C₃N₄‐NS nanocomposite photocatalysts. By taking advantage of this feature, the as‐prepared composites exhibit remarkable performances for photocatalytic wastewater treatment under visible‐light irradiation. Notably, the optimum photocatalytic activity of AgIO₃/g‐C₃N₄‐NS composites is almost 80.59 and 55.09 times higher than that of pure g‐C₃N₄‐B towards the degradation of rhodamine B and methyl orange pollutants, respectively. Finally, the stability and possible photocatalytic mechanism of the AgIO₃/g‐C₃N₄‐NS system are also investigated.     

Improved Photocatalytic Activity and Stability of Nano‐sized Ag/Ag2CO3 Plasmonic Photocatalyst by Surface Modification of Fe(III) Nanocluster

The surface modification of Ag/Ag₂CO₃ with Fe(III) ions has been achieved through simply photoreduction‐impregnation method. The obtained products were characterized by means of X‐ray diffraction (XRD), scanning electron microscopy (SEM), X‐ray photoelectron spectroscopy (XPS), and UV‐vis absorption spectroscopy. Under visible‐light irradiation (γ>420 nm), the Fe(III)/Ag/Ag₂CO₃ sample displays a higher photocatalytic activity and stability than pure Ag₂CO₃ and Ag/Ag₂CO₃ samples for the degradation of methyl orange (MO). The improved photocatalytic activity and stability of this ternary system could be ascribed to the synergetic effect between Ag nanoparticles and Fe(III) nanocluster. The metallic Ag nanoparticles cause an obviously enhanced visible‐light absorption to produce more photogenerated charges, while the Fe(III) works as an active site for the following oxygen reduction to reduce the recombination rate of photogenerated electrons and holes.