Highly stable magnetically separable copper nanocatalyst as an efficient catalyst for C(sp2)–C(sp) and C(sp2)–C(sp2) cross‐coupling reactions

A copper catalyst has been explored as an efficient and recyclable catalyst to effect Sonogashira and Suzuki cross‐coupling reactions. After modification of 2‐(((piperazin‐1‐ylmethyl)imino)methyl)phenol (PP) on the surface of amorphous silica‐coated iron oxide (Fe₃O₄@SiO₂@Cl) magnetic core–shell nanocomposite, copper(II) chloride was employed to synthesize the Fe₃O₄@SiO₂@PP‐Cu catalyst, affording a copper loading of 1.52 mmol g⁻¹. High yield, low reaction times, non‐toxicity and recyclability of the catalyst are the main merits of this protocol. The catalyst was characterized using Fourier transform infrared, X‐ray photoelectron, energy‐dispersive X‐ray and inductively coupled plasma optical emission spectroscopies, X‐ray diffraction, scanning and transmission electron microscopies, and vibrating sample magnetometry.     

Selective oxidation of ethylbenzene to acetophenone over Cr(III) Schiff base complex intercalated into layered double hydroxide

A new heterogeneous catalyst, Cr(III) Schiff base‐containing layered double hydroxide, was synthesized using the intercalation method. The Cr(III) Schiff base complex derived from 2‐hydroxy‐1‐naphthaldehyde and 4‐aminobenzoic acid was intercalated into the layered double hydroxide. The synthesized materials were characterized using inductively coupled plasma atomic emission spectrometry, energy‐dispersive X‐ray analysis, scanning electron microscopy, X‐ray diffraction, Brunauer–Emmett–Teller surface area measurement, Fourier transform infrared spectroscopy, thermogravimetric analysis, diffuse reflectance UV–visible spectroscopy and electron paramagnetic resonance spectroscopy. The catalytic activity was investigated for the oxidation of ethylbenzene with tert‐butylhydroperoxide as an oxidant under solvent‐free conditions as well as with lower chromium concentrations. In the oxidation reaction, ethylbenzene was oxidized to acetophenone and benzaldehyde. The catalyst was recycled ten times without significant loss of catalytic activity. Leaching studies performed with hot filtration experiments showed that the chromium catalyst was heterogeneous in nature and stable under the reaction conditions.     

Visualization of the Heterogeneity of Cerium Oxidation States in Single Pt/Ce2Zr2Ox Catalyst Particles by Nano‐XAFS

The cerium oxidation states in single catalyst particles of Pt/Ce₂Zr₂O_x (x=7 to 8) were investigated by spatially resolved nano X‐ray absorption fine structure (nano‐XAFS) using an X‐ray nanobeam. Differences in the distribution of the Ce oxidation states between Pt/Ce₂Zr₂O_x single particles of different oxygen compositions x were visualized in the obtained two‐dimensional X‐ray fluorescent (XRF) mapping images and the Ce L_III‐edge nano X‐ray absorption near‐edge structure (nano‐XANES) spectra.     

Zirconium oxide complex‐functionalized MCM‐41 nanostructure: an efficient and reusable mesoporous catalyst for oxidation of sulfides and oxidative coupling of thiols using hydrogen peroxide

Zirconium oxide complex‐functionalized mesoporous MCM‐41 (Zr‐oxide@MCM‐41) as an efficient and reusable catalyst is reported for the oxidation of sulfides into sulfoxides using hydrogen peroxide (H₂O₂) as the oxidant, with short reaction times in good to excellent yields at room temperature under solvent‐free conditions. Also, a simple and efficient method is reported for the oxidative coupling of thiols into corresponding disulfides in good to high yields using H₂O₂ as oxidant in the presence of Zr‐oxide@MCM‐41 as recoverable catalyst in ethanol at room temperature. A series of sulfides and thiols possessing functional groups was successfully converted into corresponding products. After completion of reactions the catalyst was easily separated with simple filtration from the reaction mixture and reused for several consecutive runs without significant loss of catalytic efficiency. The mesoporous catalyst was characterized using Fourier transform infrared spectroscopy, Brunauer–Emmett–Teller surface area measurements, X‐ray diffraction, transmission and scanning electron microscopies, energy‐dispersive X‐ray spectroscopy and thermogravimetric analysis. Copyright © 2015 John Wiley & Sons, Ltd.     

Heterogeneous Green Catalyst for Oxidation of Cyclohexene and Cyclooctene with Hydrogen Peroxide in the Presence of Host (Nanocavity of Y‐zeolite)/Guest (N4‐Cu(II) Schiff Base Complex) Nanocomposite Material

Copper(II) complex of a Schiff base ligand derived from pyrrolcarbaldehyde and o‐phenylenediamine (H₂L) has been synthesized and encapsulated in Y‐zeolite matrix. The hybrid material has been characterized by elemental analysis, IR and UV‐Vis spectroscopic studies as well as X‐ray diffraction (XRD) pattern. The encapsulated copper(II) catalyst is an active catalyst for the oxidation of cyclooctene and cyclohexene using H₂O₂ as oxidant. Under the optimized reaction conditions 81% conversion of cyclohexene with 65% selectivity for 2‐cyclohexenone formation and 87% conversion of cyclooctene with 46% selectivity for epoxide formation were obtained.     

N‐heterocyclic carbene–palladium(II) complex supported on magnetic mesoporous silica for Heck cross‐coupling reaction

Magnetic mesoporous silica was prepared via embedding magnetite nanoparticles between channels of mesoporous silica (SBA‐15). The prepared composite (Fe₃O₄@SiO₂‐SBA) was then reacted with 3‐chloropropyltriethoxysilane, sodium imidazolide and 2‐bromopyridine to give 3‐(pyridin‐2‐yl)‐1H‐imidazol‐3‐iumpropyl‐functionalized Fe₃O₄@SiO₂‐SBA as a supported pincer ligand for Pd(II). The functionalized magnetic mesoporous silica was further reacted with [PdCl₂(SMe₂)₂] to produce a supported N‐heterocyclic carbene–Pd(II) complex. The obtained catalyst was characterized using Fourier transform infrared spectroscopy, scanning electron microscopy, energy‐dispersive X‐ray analysis, vibrating sample magnetometry, Brunauer–Emmett–Teller surface area measurement and X‐ray diffraction. The amount of the loaded complex was 80.3 mg g^?1, as calculated through thermogravimetric analysis. The formation of the ordered mesoporous structure of SBA‐15 was confirmed using low‐angle X‐ray diffraction and transmission electron microscopy. Also, X‐ray photoelectron spectroscopy confirmed the presence of the Pd(II) complex on the magnetic support. The prepared magnetic catalyst was then effectively used in the coupling reaction of olefins with aryl halides, i.e. the Heck reaction, in the presence of a base. The reaction parameters, such as solvent, base, temperature, amount of catalyst and reactant ratio, were optimized by choosing the coupling reaction of 1‐bromonaphthalene and styrene as a model Heck reaction. N‐Methylpyrrolidone as solvent, 0.25 mol% catalyst, K₂CO₃ as base, reaction temperature of 120°C and ultrasonication of the catalyst for 10 min before use provided the best conditions for the Heck cross‐coupling reaction. The best results were observed for aryl bromides and iodides while aryl chlorides were found to be less reactive. The catalyst exhibited noticeable stability and reusability.     

Copper(I) oxide nanoparticles supported on magnetic casein as a bio‐supported and magnetically recoverable catalyst for aqueous click chemistry synthesis of 1,4‐disubstituted 1,2,3‐triazoles

Copper(I) oxide nanoparticles supported on magnetic casein (Cu₂O/Casein@Fe₃O₄NPs) has been synthesized as a bio‐supported catalyst and was characterized using powder X‐ray diffraction, transmission electron microscopy, energy dispersive X‐ray and Fourier transform infrared spectroscopies, thermogravimetric analysis and inductively coupled plasma optical emission spectrometry. The catalytic activity of the synthesized catalyst was investigated in one‐pot three‐component reactions of alkyl halides, sodium azide and alkynes to prepare 1,4‐disubstituted 1,2,3‐triazoles with high yields in water. The reaction work‐up is simple and the catalyst can be magnetically separated from the reaction medium and reused in subsequent reactions.     

Catalytic Performance of Modified HMCM‐22 Catalysts in Xylene Isomerization

HMCM‐22 catalysts modified with La₂O₃ (5% La) and MgO (≈0.87% Mg) were prepared respectively by impregnation method, and were characterized by scanning electron microscopy, X‐ray diffraction, N₂ physical adsorption‐desorption and temperature‐programmed desorption of NH₃. The effect of supported metallic oxides (La₂O₃, MgO) on catalytic performance in xylene isomerization of C8 aromatics (ethylbenzene, m‐xylene and o‐xylene) was investigated in detail. The experimental results showed that 5% La/HMCM‐22 catalyst had higher isomerization activity and stronger shape‐selectivity than 0.87% Mg/HMCM‐22 catalyst, owing to its more acid sites and smaller pore size. And the loading amount of La was optimized to be about 7%. Moreover, supporting metal over 7% La/HMCM‐22, respectively with 0.3% Pt, 3% Ni and 3% Mo, was carried out to prepare bifunctional isomerization catalysts. In comparison, 3% Mo/7% La/HMCM‐22 showed the best catalytic performance with both high activity and high selectivity, with the low hydrocracking of m‐xylene and o‐xylene. Besides, the optimal reaction conditions were found: 340°C, 1.5 MPa H₂, WHSV 4 h^?1 and H₂/C8 4 mol/mol. Under the above conditions, ethylbenzene conversion was up to 20%, para‐selectivity was over 23% with low xylene loss of 2.9%.     

Visualization of Heterogeneous Oxygen Storage Behavior in Platinum‐Supported Cerium‐Zirconium Oxide Three‐Way Catalyst Particles by Hard X‐ray Spectro‐Ptychography

The cerium density and valence in micrometer‐size platinum‐supported cerium–zirconium oxide Pt/Ce₂Zr₂O_x (x=7–8) three‐way catalyst particles were successfully mapped by hard X‐ray spectro‐ptychography (ptychographic‐X‐ray absorption fine structure, XAFS). The analysis of correlation between the Ce density and valence in ptychographic‐XAFS images suggested the existence of several oxidation behaviors in the oxygen storage process in the Ce₂Zr₂O_x particles. Ptychographic‐XAFS will open up the nanoscale chemical imaging and structural analysis of heterogeneous catalysts.     

A highly stable and efficient magnetically recoverable and reusable Pd nanocatalyst in aqueous media heterogeneously catalysed Suzuki C–C cross‐coupling reactions

Surface modification of Fe₃O₄ nanoparticles with triethoxyethylcyanide groups was used for the immobilization of palladium nanoparticles to produce Fe₃O₄/Ethyl‐CN/Pd. The catalyst was characterized using Fourier transform infrared, wavelength‐dispersive X‐ray, energy‐dispersive X‐ray and X‐ray photoelectron spectroscopies, field‐emission scanning electron and transmission electron microscopies, and X‐ray diffraction, vibrating sample magnetometry and inductively coupled plasma analyses. In this fabrication, cyano groups played an important role as a capping agent. The catalytic behaviour of Fe₃O₄/Ethyl‐CN/Pd nanoparticles was measured in the Suzuki cross‐coupling reaction of various aryl halides (Ar? I, Ar? Br, Ar? Cl) with phenylboronic acid in aqueous phase at room temperature. Interestingly, the novel catalyst could be recovered in a facile manner from the reaction mixture by applying an external magnet device and recycled seven times without any significant loss in activity. Copyright © 2015 John Wiley & Sons, Ltd.     

Hydrothermal preparation and characterization of ZnFe2O4 magnetic nanoparticles as an efficient heterogeneous catalyst for the synthesis of multi‐substituted imidazoles and study of their anti‐inflammatory activity

Nanoparticles are key focus of research for a wide range of novel applications. As such, ZnFe₂O₄ magnetic nanoparticles were synthesized hydrothermally and characterized via scanning and transmission electron microscopies, powder X‐ray diffraction, energy‐dispersive X‐ray and infrared spectroscopies, thermogravimetric analysis and magnetic measurements. They were used as a robust catalyst for the synthesis of a series of biologically active multi‐substituted imidazoles using a multicomponent reaction by the reaction of benzil with various aromatic aldehydes, ammonium acetate and aliphatic amines (N,N‐dimethyl‐1,3‐propanediamine and 1‐amino‐2‐propanol) under solvent‐free conditions. The key advantages of this method are shorter reaction times, very high yield and ease of operation. The thermally and chemically stable, benign and economical catalyst was easily recovered using an external magnet and reused in at least five successive runs without an appreciable loss of activity. All of these novel synthesized compounds were characterized from spectral data and their purities were checked using thin‐layer chromatography, giving one spot. Furthermore, the prepared compounds were tested for their anti‐inflammatory activity.     

Study on CuO/Al2O3 catalytic ozone treatment of acid red B solution

A CuO/Al₂O₃ catalyst was prepared using the impregnation method. The catalytic activity of CuO/Al₂O₃ for the ozonation of acid red B (ARB) in aqueous solution was studied, the chemical oxygen demand (COD) removal rate was an indicator for catalytic activity evaluation. The effects of initial ARB concentration, solution pH, and different oxidative degradation systems on oxidative degradation of ARB solution were studied. The CuO/Al₂O₃ catalyst was characterized using X‐ray diffractometry (XRD), N₂ adsorption desorption test, X‐ray photoelectron spectroscopy (XPS), and zero‐point charge (pH_zpc). The results show that copper species on the carrier were in the form of CuO and highly dispersed on the carrier. CuO can increase the alkalinity of the Al₂O₃ surface, and the CuO/Al₂O₃ catalyst facilitates the decomposition of O₃ into ·OH, which was beneficial for the catalytic O₃ oxidation degradation reaction. With the increase of the initial concentration of simulated wastewater, the CuO/Al₂O₃ catalytic reaction still has a high COD removal rate. Alkaline solution was of benefit to catalyze the degradation of ARB solution. When the ARB solution pH = 8.93, the degradation reaction was carried out for 40 min, the COD removal rate reached 83.2%. The degradation reaction was dominated by the hydroxyl radical (·OH) reaction.     

Preparation and characterization of palladium immobilized on silica‐coated Fe3O4 and its catalytic performance for Suzuki reaction under microwave irradiation

Supported palladium catalyst (Pd/Fe₃O₄@SiO₂) was easily prepared by supporting PdCl₂ on silica‐coated magnetic nanoparticles Fe₃O₄ in ethylene glycol. The as‐prepared sample was characterized by infrared spectroscopy (IR), X‐ray diffraction (XRD) and X‐ray photoelectron spectrometer (XPS). The formation of active specie Pd(0) was confirmed by XRD and XPS, and the Pd loading for the fresh and recovered catalyst was determined by atomic absorption spectroscopy (AAS). Pd/Fe₃O₄@SiO₂ was employed for the synthesis of biphenyl derivatives via Suzuki reaction. In terms of the yield of biphenyl, the supported catalyst displayed nearly equal catalytic performance to that of homologous PdCl₂ under microwave irradiation for 30 min but higher than that obtained by traditional heating method for 12 h. The catalytic performance of Pd/Fe₃O₄@SiO₂ for Suzuki reactions involving various aryl halides and arylboronic acids were also examined. Impressive yield of biphenyl at 68.2% was obtained even in the presence of unreactive aryl chlorides. Pd/Fe₃O₄@SiO₂ was recovered by a permanent magnet and directly reused in the next run, and no obvious deactivation was observed for up to 6 times. Copyright © 2016 John Wiley & Sons, Ltd.     

Synthesis of a novel and reusable biological urea based acidic nanomagnetic catalyst: Application for the synthesis of 2‐amino‐3‐cyano pyridines via cooperative vinylogous anomeric based oxidation

In the current study, a novel and reusable biological urea based nano magnetic catalyst namely Fe₃O₄@SiO₂@(CH₂)₃‐urea‐benzimidazole sulfonic acid was designed and synthesized. The structure of the titled catalyst was fully characterized using several skills including Fourier transform infrared (FT‐IR) spectroscopy, energy dispersive X‐ray (EDX) analysis, X‐ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), thermo gravimetric analysis/differential thermal analysis (TG/DTG) and vibrating sample magnetometer (VSM). Then, the catalytic performance of Fe₃O₄@SiO₂@(CH₂)₃‐urea‐benzimidazole sulfonic acid was successfully inspected towards the multicomponent synthesis of 2‐amino‐3‐cyano pyridine derivatives through a vinylogous anomeric based oxidation pathway.     

Preparation,characterization and catalytic activity studies of organoruthenium‐supported polyoxotungstates on SBA‐15

Organoruthenium‐supported polyoxometalates [(RuC₆H₆)XW₉O₃₄]^7? (XWRu; X = As, P) were selected as samples to study their catalytic activities towards the solvent‐free oxidation of n‐hexadecane. First of all, the XWRu were deposited on 3‐aminopropyltriethoxysilane‐modified SBA‐15 to prepare solid catalysts, which were characterized using powder X‐ray diffraction, nitrogen adsorption measurements, Fourier transform infrared reflectance spectroscopy and X‐ray photoelectron spectroscopy. Subsequently, their catalytic performances and stabilities were assessed through the oxidation of n‐hexadecane using air as the oxygen source without any additives and solvents, and the influences of the loading amount, catalyst amount, reaction time and reaction temperature on the catalytic activities were investigated. The results indicated the influence of the central heteroatoms X of XWRu on the catalytic activities. Copyright © 2014 John Wiley & Sons, Ltd.     

Effective and selective aerobic oxidation of primary and secondary alcohols using CoFe2O4@HT@Imine‐CuII and TEMPO in the air atmosphere

In this study, we present a versatile and easy procedure for modifying a cobalt ferrite nanoparticle step by step. A new nanocatalyst was prepared via Cu^II immobilized onto CoFe₂O₄@HT@Imine. The catalyst was fully characterized by Fourier‐transform infrared (FT‐IR), energy‐dispersive X‐ray spectroscopy (EDX), field emission scanning electron microscopy (FE‐SEM), X‐ray diffraction (XRD), and vibrating sample magnetometer (VSM) analyses. The current procedure as a green protocol offers benefits including a simple operational method, an excellent yield of products, mild reaction conditions, minimum chemical wastes, and short reaction times. Without any significant reduction in the catalytic performance, up to five recyclability cycles of the catalyst were obtained. The optimization results suggest that the best condition in the oxidation of benzyl alcohol derivatives is 0.003 g of the CoFe₂O₄@HT@Imine‐Cu^II catalyst, TEMPO, at 70°C under solvent‐free condition and air.     

Cu–S‐(propyl)‐2‐aminobenzothioate on magnetic nanoparticles: highly efficient and reusable catalyst for synthesis of polyhydroquinoline derivatives and oxidation of sulfides

Cu–S‐(propyl)‐2‐aminobenzothioate supported on functionalized Fe₃O₄ magnetic nanoparticles is reported as a reusable and highly efficient nanocatalyst for the one‐pot synthesis of polyhydroquinoline derivatives and also for selective oxidation of sulfides to sulfoxides. The prepared nanoparticles were characterized using Fourier transform infrared spectroscopy, vibrating sample magnetometry, thermogravimetric analysis, transmission and scanning electron microscopies, energy‐dispersive X‐ray spectroscopy, X‐ray diffraction, inductively coupled plasma atomic emission spectroscopy and atomic absorption spectroscopy. The nanocatalyst was easily recovered using an external magnet and reused several times without significant loss of its catalytic efficiency. Copyright © 2016 John Wiley & Sons, Ltd.     

Catalytic Conversion of SO2 Released from the Roasting Process of Copper Sulfides to SO3 by New Nanocatalysts of Vanadium(V) Oxide

Two new silica‐supported vanadium(V) oxide nanocatalysts were synthesized from vanadyl(IV ) sulfate and vanadyl(IV ) oxalate by the sol–gel method. The nanocatalysts were characterized by Fourier transform infrared spectroscopy, thermogravimetry, X‐ray diffraction, X‐ray fluorescence, and field‐emission scanning electron microscopy. The average diameter of the nanocatalysts was ~16 nm. The catalytic activity of both nanocatalysts was investigated in the oxidation of sulfur dioxide (SO₂ ) released from the roasting of copper sulfides to sulfur trioxide (SO₃ ), and the results were compared with those obtained from a commercial BASF (Baden Aniline and Soda Factory) catalyst. It is worth mentioning that our nanocatalysts show higher activity than the commercial catalyst for the oxidation of SO₂ to SO₃ under similar reaction conditions. The suggested electrocatalytic mechanism for the oxidation of SO₂ to SO₃ was confirmed by computational studies. Our calculations indicate that the terminal VO bond of V₂O₅ is likely the most active site for the adsorption and oxidation of SO₂ .     

Fe3O4@SiO2@Im‐bisethylFc [HC2O4] as a novel recyclable heterogeneous nanocatalyst for synthesis of bis‐coumarin derivatives

Nanomagnetic bisethylferrocene‐containing ionic liquid supported on silica‐coated iron oxide (Fe₃O₄@SiO₂@Im‐bisethylFc [HC₂O₄]) as a novel catalyst was designed and synthesized. The described catalyst was recycled and used without change in the time and efficiency of the condensation reaction. The Fourier transform‐infrared spectroscopy (FT‐IR), scanning electron microscopy images, X‐ray diffraction patterns, energy‐dispersive X‐ray spectroscopy, transmission electron microscope and vibrating‐sample magnetometer results confirmed the formation of Fe₃O₄@SiO₂@Im‐bisethylFc [HC₂O₄] magnetic nanoparticle. The novel bis‐coumarin derivatives were identified by ¹H‐NMR, ¹³C‐NMR, FT‐IR and CHNS analysis.     

A new nano‐Fe3O4‐supported organocatalyst based on 3,4‐dihydroxypyridine: an efficient heterogeneous nanocatalyst for one‐pot synthesis of pyrazolo[3,4‐b]pyridines and pyrano[2,3‐d]pyrimidines

A simple and practical strategy for the synthesis of a novel nano‐Fe₃O₄‐supported organocatalyst system based on 3,4‐dihydroxypyridine (Fe₃O₄/Py) has been developed. The prepared catalyst was characterized using Fourier transform infrared spectroscopy, transmission and scanning electron microscopies, X‐ray diffraction, vibrating sample magnetometry and energy‐dispersive X‐ray analysis. Accordingly, the Fe₃O₄/Py nanoparticles show a superparamagnetic property with a saturation magnetization of 61 emu g^?1, indicating potential application in magnetic separation technology. Our experimental results reveal that the pyridine‐functionalized Fe₃O₄ nanoparticles are an efficient base catalyst for the domino condensation of various aromatic aldehydes, Meldrum's acid and 5‐methylpyrazol‐3‐amine under very mild reaction condition and in the presence of ethanol solvent. Moreover, the synthesized catalyst was used for one‐pot, three‐component condensation of aromatic aldehydes with barbituric acid and malononitrile to produce 7‐amino‐2,4‐dioxo‐5‐phenyl‐2,3,4,5‐tetrahydro‐1H‐pyrano[2,3‐d]pyrimidine‐6‐carbonitriles. All reactions are completed in short times and all products are obtained in good to excellent yields. Also, notably, the catalyst was reused five times without significant degradation in catalytic activity and performance. Copyright © 2016 John Wiley & Sons, Ltd.