Methylamine‐Gas‐Induced Defect‐Healing Behavior of CH3NH3PbI3 Thin Films for Perovskite Solar Cells

We report herein the discovery of methylamine (CH₃NH₂) induced defect‐healing (MIDH) of CH₃NH₃PbI₃ perovskite thin films based on their ultrafast (seconds), reversible chemical reaction with CH₃NH₂ gas at room temperature. The key to this healing behavior is the formation and spreading of an intermediate CH₃NH₃PbI₃?xCH₃NH₂ liquid phase during this unusual perovskite–gas interaction. We demonstrate the versatility and scalability of the MIDH process, and show dramatic enhancement in the performance of perovskite solar cells (PSCs) with MIDH. This study represents a new direction in the formation of defect‐free films of hybrid perovskites.     

Methylammonium-Mediated Evolution of Mixed-Organic-Cation Perovskite Thin Films: A Dynamic Composition-Tuning Process

Methylammonium-mediated phase-evolution behavior of FA_1−xMA_xPbI₃ mixed-organic-cation perovskite (MOCP) is studied. It is found that by simply enriching the MOCP precursor solutions with excess methylammonium cations, the MOCPs form via a dynamic composition-tuning process that is key to obtaining MOCP thin films with superior properties. This simple chemical approach addresses several key challenges, such as control over phase purity, uniformity, grain size, composition, etc., associated with the solution-growth of MOCP thin films with targeted compositions.     

Control of Charge Transport in the Perovskite CH3NH3PbI3 Thin Film

Carrier density and transport properties in the CH₃NH₃PbI₃ thin film have been investigated. It is found that the carrier density, the depletion field, and the charge collection and transport properties in the CH₃NH₃PbI₃ absorber film can be controlled effectively by different concentrations of reactants. That is, the carrier properties and the self‐doping characteristics in CH₃NH₃PbI₃ films are strongly influenced by the reaction thermodynamic and kinetic processes. Furthermore, by employing mixed solvents with ethanol and isopropanol to deposit the CH₃NH₃PbI₃ film, the charge collection and transport efficiencies are improved significantly, thereby yielding an overall enhanced cell performance.     

A Fast Deposition‐Crystallization Procedure for Highly Efficient Lead Iodide Perovskite Thin‐Film Solar Cells

Thin‐film photovoltaics based on alkylammonium lead iodide perovskite light absorbers have recently emerged as a promising low‐cost solar energy harvesting technology. To date, the perovskite layer in these efficient solar cells has generally been fabricated by either vapor deposition or a two‐step sequential deposition process. We report that flat, uniform thin films of this material can be deposited by a one‐step, solvent‐induced, fast crystallization method involving spin‐coating of a DMF solution of CH₃NH₃PbI₃ followed immediately by exposure to chlorobenzene to induce crystallization. Analysis of the devices and films revealed that the perovskite films consist of large crystalline grains with sizes up to microns. Planar heterojunction solar cells constructed with these solution‐processed thin films yielded an average power conversion efficiency of 13.9±0.7 % and a steady state efficiency of 13 % under standard AM 1.5 conditions.     

Theoretical Treatment of CH3NH3PbI3 Perovskite Solar Cells

Hybrid halide perovskite solar cells (PSCs) giving over 22 % power conversion efficiencies (PCEs) have attracted considerable attention. Although perovskite plays a significant role in the operation of PSCs, the fundamental theories associated with perovskites have not been resolved in spite of the increase in research. In this Minireview, we assess the current understanding, based on the first‐principles calculations, of structural and electronic properties, defects, ionic diffusion, and shift current for CH₃NH₃PbI₃ perovskite, and the effect of ionic transport on the hysteresis of current–voltage curves in PSCs. The shift current connected to the possible presence of ferroelectricity is also discussed. The current state‐of‐the‐art and some open questions regarding PSCs are also highlighted, and the benefits, challenges, and potentials of perovskite for use in PSCs are stressed.     

Role of the Iodide–Methylammonium Interaction in the Ferroelectricity of CH3NH3PbI3

Excellent conversion efficiencies of over 20 % and facile cell production have placed hybrid perovskites at the forefront of novel solar cell materials, with CH₃NH₃PbI₃ being an archetypal compound. The question why CH₃NH₃PbI₃ has such extraordinary characteristics, particularly a very efficient power conversion from absorbed light to electrical power, is hotly debated, with ferroelectricity being a promising candidate. This does, however, require the crystal structure to be non‐centrosymmetric and we herein present crystallographic evidence as to how the symmetry breaking occurs on a crystallographic and, therefore, long‐range level. Although the molecular cation CH₃NH₃⁺ is intrinsically polar, it is heavily disordered and this cannot be the sole reason for the ferroelectricity. We show that it, nonetheless, plays an important role, as it distorts the neighboring iodide positions from their centrosymmetric positions.     

In CH3NH3PbI3 Perovskite Film,the Surface Termination Layer Dominates the Moisture Degradation Pathway

Theoretical studies have shown that surface terminations, such as MAI or PbI layers, greatly affect the environmental stability of organic–inorganic perovskite. However, until now, there has been little effort to experimentally detect the existence of MAI or PbI terminations on MAPbI₃ grains, let alone disclose their effects on the humidity degradation pathway of perovskite solar cell. Here, we successfully modified and detected the surface terminations of MAI and PbI species on polycrystalline MAPbI₃ films. MAI-terminated perovskite film followed the moisture degradation process from MAPbI₃ to hydrate MAPbI₃⋅H₂O and then into PbI₂, with penetration of water molecules being the main driving force leading to the degradation of MAPbI₃ layer by layer. In contrast, for the PbI-terminated perovskite film in a humid atmosphere, a deprotonation degradation pathway was confirmed, in which the film preferentially degraded directly from MAPbI₃ into PbI₂, here the iodine defects played a key role in promoting the dissociation of water molecules into OH⁻ and further catalyzing the decomposition of perovskite.     

Mixed‐Halide CH3NH3PbI3−xXx (X=Cl,Br, I) Perovskites: Vapor‐Assisted Solution Deposition and Application as Solar Cell Absorbers

There have been recent reports on the formation of single‐halide perovskites, CH₃NH₃PbX₃ (X=Cl, Br, I), by means of vapor‐assisted solution processing. Herein, the successful formation of mixed‐halide perovskites (CH₃NH₃PbI_3?xX_x) by means of a vapor‐assisted solution method at ambient atmosphere is reported. The perovskite films are synthesized by exposing PbI₂ film to CH₃NH₃X (X=I, Br, or Cl) vapor. The prepared perovskite films have uniform surfaces with good coverage, as confirmed by SEM images. The inclusion of chlorine and bromine into the structure leads to a lower temperature and shorter reaction time for optimum perovskite film formation. In the case of CH₃NH₃PbI_3?xCl_x, the optimum reaction temperature is reduced to 100 °C, and the resulting phases are CH₃NH₃PbI₃ (with trace Cl) and CH₃NH₃PbCl₃ with a ratio of about 2:1. In the case of CH₃NH₃PbI_3?xBr_x, single‐phase CH₃NH₃PbI₂Br is formed in a considerably shorter reaction time than that of CH₃NH₃PbI₃. The mesostructured perovskite solar cells based on CH₃NH₃PbI₃ films show the best optimal power conversion efficiency of 13.5 %, whereas for CH₃NH₃PbI_3?xCl_x and CH₃NH₃PbI_3?xBr_x the best recorded efficiencies are 11.6 and 10.5 %, respectively.     

Enhancement of the Photovoltaic Performance of CH3NH3PbI3 Perovskite Solar Cells through a Dichlorobenzene‐Functionalized Hole‐Transporting Material

A dichlorobenzene‐functionalized hole‐transporting material (HTM) is developed for a CH₃NH₃PbI₃‐based perovskite solar cell. Notwithstanding the similarity of the frontier molecular orbital energy levels, optical properties, and hole mobility between the functionalized HTM [a polymer composed of 2′‐butyloctyl‐4,6‐dibromo‐3‐fluorothieno[3,4‐b]thiophene‐2‐carboxylate (TT‐BO), 3′,4′‐dichlorobenzyl‐4,6‐dibromo‐3‐fluorothieno[3,4‐b]thiophene‐2‐carboxylate (TT‐DCB), and 2,6‐bis(trimethyltin)‐4,8‐bis(2‐ethylhexyloxy)benzo[1,2‐b:4,5‐b′]dithiophene (BDT‐EH), denoted PTB‐DCB21] and the nonfunctionalized polymer [a polymer composed of thieno[3,4‐b]thiophene (TT) and benzo[1,2‐b:4,5‐b′]dithiophene (BDT), denoted PTB‐BO], a higher power conversion efficiency for PTB‐DCB21 (8.7 %) than that for PTB‐BO (7.4 %) is achieved because of a higher photocurrent and voltage. The high efficiency is even obtained without including additives, such as lithium bis(trifluoromethanesulfonyl)imide and/or 4‐tert‐butylpyridine, that are commonly used to improve the conductivity of the HTM. Transient photocurrent–voltage studies show that the PTB‐DCB21‐based device exhibits faster electron transport and slower charge recombination; this might be related to better interfacial contact through intermolecular chemical interactions between the perovskite and the 3,4‐dichlorobenzyl group in PTB‐DCB21.     

Influence of Orientational Disorder on the Optical Absorption Properties of the Hybrid Metal-Halide Perovskite CH3NH3PbI3

An experimental and theoretical investigation is reported to analyze the relation between the structural and absorption properties of CH₃NH₃PbI₃ in the tetragonal phase. More than 3000 geometry optimizations were performed to reveal the structural disorder and identify structures with the lowest energies. The electronic structure calculations provide an averaged band gap of 1.674 eV, which is in excellent agreement with the experimental value of about 1.6 eV. The simulations of the absorption spectrum for three representative structures with lowest energy reproduced the absorption shoulders observed in the experimental spectra. These shoulders are assigned to excitations having similar orbital characters and involving transitions between hybridized 6s(Pb)/5p(I) orbitals and 6p(Pb) orbitals. The geometries of the three structures were analyzed and the effects of the inorganic frame and the CH₃NH₃⁺ cations on the absorption properties were estimated. It was found that both changes in the inorganic frame and the CH₃NH₃⁺ cations orientations impact the absorption spectra, by modifying the transitions energies and intensities. This highlights the role of CH₃NH₃⁺ cation in influencing the absorption properties of CH₃NH₃PbI₃ and demonstrates that CH₃NH₃⁺ cation is one of the key elements explaining the broad and nearly constant absorption spectrum in the visible range.     

Post‐Treatment of CH3NH3PbI3/PbI2 Composite Films with Methylamine to Realize High‐Performance Photoconductor Devices

Organometallic halide perovskites have attracted great research interest as light‐active materials for use in optoelectronics. Here, we report a high‐performance photoconductor based on a methylammonium lead iodide (MAPbI₃) film that was prepared from a methylamine‐treated MAPbI₃/PbI₂ perovskite film. An ultrahigh responsivity of 3.6 A W^?1 and detectivity of 5.4×10¹² Jones were obtained for the film under 0.5 mW cm^?2 white‐light illumination. In addition, under 420 nm light irradiation, the film exhibited its highest responsivity and detectivity of 30 A W^?1 and 2.4×10¹⁴ Jones, respectively. The excellent photo‐response performance results from the improved electronic quality and suppressed nonradiative recombination channels of the treated perovskite thin film.     

Inkjet Printing and Instant Chemical Transformation of a CH3NH3PbI3/Nanocarbon Electrode and Interface for Planar Perovskite Solar Cells

A planar perovskite solar cell that incorporates a nanocarbon hole‐extraction layer is demonstrated for the first time by an inkjet printing technique with a precisely controlled pattern and interface. By designing the carbon plus CH₃NH₃I ink to transform PbI₂ in situ to CH₃NH₃PbI₃, an interpenetrating seamless interface between the CH₃NH₃PbI₃ active layer and the carbon hole‐extraction electrode was instantly constructed, with a markedly reduced charge recombination compared to that with the carbon ink alone. As a result, a considerably higher power conversion efficiency up to 11.60 % was delivered by the corresponding solar cell. This method provides a major step towards the fabrication of low‐cost, large‐scale, metal‐electrode‐free but still highly efficient perovskite solar cells.     

Porous and Shape‐Anisotropic Single Crystals of the Semiconductor Perovskite CH3NH3PbI3 from a Single‐Source Precursor

Significant progress in solar‐cell research is currently made by the development of metal–organic perovskites (MOPs) owing to their superior properties, such as high absorption coefficients and effective transport of photogenerated charges. As for other semiconductors, it is expected that the properties of MOPs may be significantly improved by a defined nanostructure. However, their chemical sensitivity (e.g., towards hydrolysis) prohibits the application of methods already known for the synthesis of other nanomaterials. A new and general method for the synthesis of various (CH₃NH₃)PbI₃ nanostructures from a novel single‐source precursor is presented. Nanoporous MOP single crystals are obtained by a crystal‐to‐crystal transformation that is accompanied by spinodal demixing of the triethylene glycol containing precursor structure. Selective binding of a capping agent can be used to tune the particle shape of the MOP nanocrystals.     

Pseudohalide‐Induced Moisture Tolerance in Perovskite CH3NH3Pb(SCN)2I Thin Films

Two pseudohalide thiocyanate ions (SCN^?) have been used to replace two iodides in CH₃NH₃PbI₃, and the resulting perovskite material was used as the active material in solar cells. In accelerated stability tests, the CH₃NH₃Pb(SCN)₂I perovskite films were shown to be superior to the conventional CH₃NH₃PbI₃ films as no significant degradation was observed after the film had been exposed to air with a relative humidity of 95 % for over four hours, whereas CH₃NH₃PbI₃ films degraded in less than 1.5 hours. Solar cells based on CH₃NH₃Pb(SCN)₂I thin films exhibited an efficiency of 8.3 %, which is comparable to that of CH₃NH₃PbI₃ based cells fabricated in the same way.     

Ion‐Exchange‐Induced 2D–3D Conversion of HMA1−xFAxPbI3Cl Perovskite into a High‐Quality MA1−xFAxPbI3 Perovskite

High‐quality phase‐pure MA_1?xFA_xPbI₃ planar films (MA=methylammonium, FA=formamidinium) with extended absorption and enhanced thermal stability are difficult to deposit by regular simple solution chemistry approaches owing to crystallization competition between the easy‐to‐crystallize but unwanted δ‐FAPbI₃/MAPbI₃ and FA_xMA_1?xPbI₃ requiring rigid crystallization conditions. Here A 2D–3D conversion to transform compact 2D mixed composition HMA_1?xFA_xPbI₃Cl perovskite precursor films into 3D MA_1?xFA_xPbI₃ (x=0.1–0.9) perovskites is presented. The designed Cl/I and H/FA(MA) ion exchange reaction induced fast transformation of compact 2D perovskite film, helping to form the phase‐pure and high quality MA_1?xFA_xPbI₃ without δ‐FAPbI₃ and MAPbI₃ impurity. In all, we successfully developed a facile one‐step method to fabricate high quality phase‐pure MA_1?xFA_xPbI₃ (x=0.1–0.9) perovskite films by 2D–3D conversion of HMA_1?xFA_xPbI₃Cl perovskite. This 2D–3D conversion is a promising strategy for lead halide perovskite fabrication.     

Efficient and Stable Thin‐Film Luminescent Solar Concentrators Enabled by Near‐Infrared Emission Perovskite Nanocrystals

A novel triphenylphosphine (TPP) treatment strategy was developed to prepare the near‐infrared emission CsPbI₃ nanocrystal (NC)‐polymer composite thin‐film luminescent solar concentrators (LSCs) featuring high absolute photoluminescence quantum yield (PLQY), low reabsorption, and high stability. The PL emission of the LSCs is centered at about 700 nm with 99.4±0.4 % PLQY and narrow full width at half maximum (FWHM) of 75 meV (30 nm). Compared with LSCs prepared with classic CsPbI₃ NCs, the stability of the LSCs after TPP treatments has been greatly improved, even after long‐term (30 days) immersion in water and strong mercury‐lamp irradiation (50 mW cm^?2). Owing to the presence of lone‐pair electrons on the phosphorus atom, TPP is also used as a photoinitiator, with higher efficiency than other common photoinitiators. Large‐area (ca. 75 cm²) infrared LSCs were achieved with a high optical conversion efficiency of 3.1 % at a geometric factor of 10.     

Lead‐Free Solar Cells based on Tin Halide Perovskite Films with High Coverage and Improved Aggregation

Two simple methods to improve tin halide perovskite film structure are introduced, aimed at increasing the power conversion efficiency of lead free perovskite solar cells. First, a hot antisolvent treatment (HAT) was found to increase the film coverage and prevent electrical shunting in the photovoltaic device. Second, it was discovered that annealing under a low partial pressure of dimethyl sulfoxide vapor increased the average crystallite size. The topographical and electrical qualities of the perovskite films are substantively improved as a result of the combined treatments, facilitating the fabrication of tin‐based perovskite solar cell devices with power conversion efficiencies of over 7 %.     

紫外光辐照下CH3NH3PbI3基钙钛矿太阳能电池失效机制

随着光伏产业的不断发展,有机无机杂化钙钛矿太阳能电池的研发成为科学与工业界广泛关注的焦点。到目前为止,其光电转换效率已经提高到了25.2%,成为替代硅基太阳能电池的核心方案之一。然而,钙钛矿太阳能电池的稳定性较差,容易受到环境中氧气、水分、温度甚至光照的影响,这严重制约了其大规模推广与应用。大量科学研究表明,如何避免紫外辐照下有机无机杂化钙钛矿太阳能电池的性能衰减,对于提高钙钛矿太阳能电池的光照稳定性至关重要。然而到目前为止,仍然没有系统的工作来对紫外辐照下钙钛矿太阳能电池性能以及微结构演化过程进行详细的表征与分析。本文中,我们利用聚焦离子束-扫描电子显微分析(FIB-SEM)以及球差校正透射电子显微分析(TEM)等技术,全面地研究了紫外辐照过程中有机无机杂化钙钛矿太阳能电池性能变化规律以及电池微结构演化特征。实验结果表明,紫外辐照过程中太阳能电池内部会形成0.5–0.6 V的内建电场,钙钛矿中的I^-离子在电场的驱动下向金属Au电极和空穴传输层2, 2’, 7, 7’-四[N, N-二(4-甲氧基苯基)氨基]-9, 9'-螺二芴(Spiro-OMeTAD)一侧迁移;随后,空穴传输层与金电极的界面处,碘离子与光生空穴一起与金电极发生反应,将金属态Au氧化成离子态Au⁺。而Au⁺离子则在内建电场的驱动下反向迁移穿过钙钛矿MAPbI₃层,直接被SnO₂和MAPbI₃界面处的电子还原形成金属Au纳米团簇。除此之外,紫外辐照过程中钙钛矿太阳能电池性能降低的同时,往往伴随着Spiro-OMeTAD与钙钛矿界面处物质迁移、钙钛矿薄膜内晶界展宽以及Au纳米颗粒周围MAPbI₃物相分解等现象。以上各种因素的协同作用,共同导致了紫外光照下有机无机杂化钙钛矿太阳能电池光电转换性能(PCE)、开路电压(V_oc)以及短路电流(J_sc)等性能参数的急剧下降。     

(CH3NH3)2PdCl4: A Compound with Two‐Dimensional Organic–Inorganic Layered Perovskite Structure

The synthesis of previously unknown perovskite (CH₃NH₃)₂PdCl₄ is reported. Despite using an organic cation with the smallest possible alkyl group, a 2D organic–inorganic layered Pd‐based perovskites was still formed. This demonstrates that Pd‐based 2D perovskites can be obtained even if the size of the organic cation is below the size limit predicted by the Goldschmidt tolerance‐factor formula. The (CH₃NH₃)₂PdCl₄ phase has a bulk resistivity of 1.4 Ω cm, a direct optical gap of 2.22 eV, and an absorption coefficient on the order of 10⁴ cm^?1. XRD measurements suggest that the compound is moderately stable in air, an important advantage over several existing organic–inorganic perovskites that are prone to phase degradation problems when exposed to the atmosphere. Given the recent interest in organic–inorganic perovskites, the synthesis of this new Pd‐based organic–inorganic perovskite may be helpful in the preparation and understanding of other organic–inorganic perovskites.