Pd(II) salen complex covalently anchored to multi‐walled carbon nanotubes as a heterogeneous and reusable precatalyst for Mizoroki–Heck and Hiyama cross‐coupling reactions

A Pd(II) salen complex anchored to multi‐walled carbon nanotubes showed excellent catalytic activity and stability for the Mizoroki–Heck and Hiyama cross‐couplings of aryl halides with olefins and phenylsiloxanes. Furthermore, the heterogeneous catalyst could be reused up to four times with the catalytic activity being recovered easily after simple manipulations. Copyright © 2014 John Wiley & Sons, Ltd.     

Magnetite tethered mesoionic carbene‐palladium (II): An efficient and reusable nanomagnetic catalyst for Suzuki‐Miyaura and Mizoroki‐Heck cross‐coupling reactions in aqueous medium

In this paper, a highly active, air‐ and moisture‐stable and easily recoverable magnetic nanoparticles tethered mesoionic carbene palladium (II) complex (MNPs‐MIC‐Pd) as nanomagnetic catalyst was successfully synthesized by a simplistic multistep synthesis under aerobic conditions using commercially available inexpensive chemicals for the first time. The synthesized MNPs‐MIC‐Pd nanomagnetic catalyst was in‐depth characterized by numerous physicochemical techniques such as FT‐IR, ICP‐AES, FESEM, EDS, TEM, p‐XRD, XPS, TGA and BET surface area analysis. The prepared MNPs‐MIC‐Pd nanomagnetic catalyst was used to catalyze the Suzuki–Miyaura and Mizoroki–Heck cross‐coupling reactions and exhibited excellent catalytic activity for various substrates under mild reaction conditions. Moreover, MNPs‐MIC‐Pd nanomagnetic catalyst could be easily and rapidly recovered by applying an external magnet. The recovered MNPs‐MIC‐Pd nanomagnetic catalyst exhibited very good catalytic activity up to ten times in Suzuki–Miyaura and five times in Mizoroki–Heck cross‐coupling reactions without considerable loss of its catalytic activity. However, MNPs‐MIC‐Pd nanomagnetic catalyst shows notable advantages such as heterogeneous nature, efficient catalytic activity, mild reaction conditions, easy magnetic work up and recyclability.     

Polystyrene-supported recyclable palladacycle catalyst for Heck, Suzuki and Sonogashira reactions

A new type of soluble polystyrene-supported palladium complex as an excellent and recyclable palladacycle catalyst was discovered for carboncarbon bond formation in Heck, Suzuki and Sonogashira reactions. Precipitation and filtration process for recycling the catalyst was also achieved.     

Palladium supported on silica–chitosan hybrid material (Pd‐CS@SiO2) for Suzuki–Miyaura and Mizoroki–Heck cross‐coupling reactions

Palladium supported on silica–chitosan hybrid material was prepared and characterized using thermogravimetric and differential thermogravimetric analyses, scanning electron microscopy, and Fourier transform infrared, energy‐dispersive X‐ray and X‐ray photoelectron spectroscopies. The prepared Pd‐CS@SiO₂ catalyst (1 mol%) was used for the Suzuki–Miyaura cross‐coupling reaction of various aryl halides and arylboronic acids in 95% ethanol at 80 °C and the Mizoroki–Heck reaction in dimethylformamide at 110 °C using K₂CO₃ as a base. The developed catalyst is well suitable for the 3R approach (recoverable, robust, recyclable) for cross‐coupling reactions without appreciable loss of its activity. Copyright © 2015 John Wiley & Sons, Ltd.     

Pd(II) complexes of Schiff bases and their application as catalysts in Mizoroki–Heck and Suzuki–Miyaura cross‐coupling reactions

Schiff bases of 2‐(phenylthio)aniline, (C₆H₅)SC₆H₄N?CR (R = (o‐CH₃)(C₆H₅), (o‐OCH₃)(C₆H₅) or (o‐CF₃)(C₆H₅)), and their palladium complexes (PdLCl₂) were synthesized. The compounds were characterized using ¹H NMR and ¹³C NMR spectroscopy and micro analysis. Also, electrochemical properties of the ligands and Pd(II) complexes were investigated in dimethylformamide–LiClO₄ solution with cyclic and square wave voltammetry techniques. The Pd(II) complexes showed both reversible and quasi‐reversible processes in the ?1.5 to 0.3 V potential range. The synthesized Pd(II) complexes were evaluated as catalysts in Mizoroki–Heck and Suzuki–Miyaura cross‐coupling reactions. Copyright © 2015 John Wiley & Sons, Ltd.     

Mizoroki–Heck and Suzuki–Miyaura reactions mediated by poly(2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid)‐stabilized magnetically separable palladium catalyst

The purpose of this work was to synthesize and characterize a new magnetic polymer nanosphere‐supported palladium(II) acetate catalyst for reactions requiring harsh conditions. In this regard, an air‐stable, moisture‐stable and highly efficient heterogenized palladium was synthesized by the coordination of palladium(II) acetate with poly(2‐acrylamido‐2‐methyl‐1‐propanesulfonic acid)‐grafted modified magnetic nanoparticles with a core–shell structure. The structure of the newly developed catalyst was characterized using various techniques. The catalytic activity of the resultant nano‐organometallic catalyst was evaluated in Mizoroki–Heck and Suzuki–Miyaura reactions to afford the corresponding coupling products in good to excellent yields. High selectivity as well as outstanding turnover number (14 143, 4900) and turnover frequency (28 296, 7424) values were recorded for the catalyst in Suzuki–Miyaura and Mizoroki–Heck reactions, respectively. Magnetic separation and recycling of the catalyst for at least six runs became possible without any significant loss of efficiency or any detectable palladium leaching.     

A highly stable and efficient magnetically recoverable and reusable Pd nanocatalyst in aqueous media heterogeneously catalysed Suzuki C–C cross‐coupling reactions

Surface modification of Fe₃O₄ nanoparticles with triethoxyethylcyanide groups was used for the immobilization of palladium nanoparticles to produce Fe₃O₄/Ethyl‐CN/Pd. The catalyst was characterized using Fourier transform infrared, wavelength‐dispersive X‐ray, energy‐dispersive X‐ray and X‐ray photoelectron spectroscopies, field‐emission scanning electron and transmission electron microscopies, and X‐ray diffraction, vibrating sample magnetometry and inductively coupled plasma analyses. In this fabrication, cyano groups played an important role as a capping agent. The catalytic behaviour of Fe₃O₄/Ethyl‐CN/Pd nanoparticles was measured in the Suzuki cross‐coupling reaction of various aryl halides (Ar? I, Ar? Br, Ar? Cl) with phenylboronic acid in aqueous phase at room temperature. Interestingly, the novel catalyst could be recovered in a facile manner from the reaction mixture by applying an external magnet device and recycled seven times without any significant loss in activity. Copyright © 2015 John Wiley & Sons, Ltd.     

Biguanidine‐functionalized chitosan to immobilize palladium nanoparticles as a novel,efficient and recyclable heterogeneous nanocatalyst for Suzuki–Miyaura coupling reactions

Biguanidine‐functionalized chitosan was synthesized and combined with palladium nanoparticles to yield a recyclable, environmentally benign, heterogeneous catalytic system for the Suzuki–Miyaura C–C coupling reaction. The catalyst was characterized using various techniques. The catalyst was used in Suzuki cross‐coupling reactions of various aryl halides, including less reactive chlorobenzenes, with phenylboronic acid to give biaryls without any additive or ligand. A reusability test demonstrated that the catalyst was highly efficient even after six runs. Solid‐phase poisoning and leaching tests indicated that the catalyst has a heterogeneous nature. Copyright © 2016 John Wiley & Sons, Ltd.     

Ligandless heterogeneous palladium: an efficient and recyclable catalyst for Suzuki‐type cross‐coupling reaction

A mild and efficient ligand‐free Suzuki‐type cross‐coupling reaction of benzoyl chlorides and arylboronic acids catalyzed by heterogeneous Pd/C was developed. Benzoyl chlorides undergo cross‐coupling with electronically diverse arylboronic acids to give biaryl ketones in excellent yield, under aqueous media and optimum temperature. The application of 3 mol% of 10 wt% Pd/C to the cross‐coupling delivers utmost efficiency, and could be reused up to many consecutive cycles without any loss in activity. This method proceeds under aqueous media and a recyclable catalytic system, offering an environmentally benign alternative to the existing protocols. Copyright © 2014 John Wiley & Sons, Ltd.     

Arylhydrazones Derivatives Containing a Benzothiazole Moiety,Efficient Ligands in the Palladium‐Catalyzed Mizoroki–Heck and Suzuki–Miyaura Cross‐coupling Reactions under IR Irradiation

A simple arylhydrazone containing the benzothiazole moiety which may be used as an efficient ligand in the palladium‐catalyzed Mizoroki–Heck and Suzuki–Miyaura cross‐coupling reactions, under infrared irradiation as an alternative source of energy, is presented. The reactions proceeded with extremely high efficiency under mild conditions and produced very good yields.     

Pd/MOF‐199: As an efficient heterogeneous catalyst for the Suzukie Miyaura cross‐coupling reaction

Successful deposition of Pd nanoparticles is described using MOF‐199 as a support. Various characterization techniques including FTIR, XRD, SEM, BET‐BJH, TG‐DTA, and NH₃‐TPD were used to verify the efficiency of catalysts. Pd/MOF‐199 is utilized as a catalyst for Suzukie Miyaura reactions with reasonable to excellent reaction yields under reflux conditions in H₂O: ethanol solvent.     

Palladium nanoparticle‐decorated magnetic pomegranate peel‐derived porous carbon nanocomposite as an excellent catalyst for Suzuki–Miyaura and Sonogashira cross‐coupling reactions

Porous carbon (PC) material was prepared from the carbonization of pomegranate peel waste. Subsequently, magnetically separable Fe₃O₄@PC was synthesized from Fe₃O₄ nanoparticles decorated on PC by the co‐precipitation method of iron ions. Finally, Fe₃O₄@PC was successfully decorated with palladium nanoparticles in a simple route by reducing H₂PdCl₄ in the presence of sodium dodecylsulfate, which was used as both surfactant and reducing agent. Additionally, the effect of temperature on the carbonization process was studied. The Pd/Fe₃O₄@PC nanocomposite was used as an efficient and heterogeneous catalyst for Suzuki–Miyaura and Sonogashira cross‐coupling reactions in an environmentally friendly medium.     

Cobalt supported on dendronized magnetic nanoparticles: A new highly efficient and recyclable catalyst for the Mizoroki–Heck cross‐coupling reaction

Polyamidoamine (PAMAM) is one of the most interesting types of hyperbranched polymers that carry a large number of amino groups on its surface. PAMAM has gained significant attention from synthetic organic chemists due to its structural characteristics, controllable structure, inner porosity, and ability to trap a wide range of ions and molecules. So, in this work, the PAMAM dendrimer was synthesized, grafted onto the surface of magnetite nanoparticles, and the resulting hybrid nanoparticles were then employed as suitable host for immobilizing cobalt nanoparticles. The newly developed catalyst was well characterized by Fourier transform‐infrared, X‐ray diffraction, thermogravimetric analysis, field emission‐scanning electron microscopy, transmission electron microscopy, atomic absorption spectroscopy, element mapping and energy‐dispersive X‐ray analysis. The efficiency of the as‐prepared nanocatalyst was evaluated for the Mizoroki–Heck cross‐coupling reactions. The MNP@PAMAM‐Co represented perfect catalytic efficiency and high selectivity for the Mizoroki–Heck cross‐coupling reaction compared with previously reported catalysts. The catalyst separation from the reaction mixture was easily achieved with the assistance of an external magnetic field, and its recycling was also investigated for five consecutive runs. Hot filtration confirmed no leaching of the active metal during the Heck coupling.     

Threonine stabilizer‐controlled well‐dispersed small palladium nanoparticles on modified magnetic nanocatalyst for Heck cross‐coupling process in water

We report the synthesis of magnetically separable Fe₃O₄@Silica‐Threonine‐Pd⁰ magnetic nanoparticles with a core–shell structure. After synthesis of Fe₃O₄@Silica, threonine as an efficient stabilizer/ligand was bonded to the surface of Fe₃O₄@Silica. Then, palladium nanoparticles were generated on the threonine‐modified catalyst. The threonine stabilizer helps to generate palladium nanoparticles of small size (less than 4 nm) with high dispersity and uniformity. Magnetically separable Fe₃O₄@Silica‐Threonine‐Pd⁰ nanocatalyst was fully characterized using various techniques. This nanocatalyst efficiently catalysed the Heck cross‐coupling reaction of a variety of substrates in water medium as a green, safe and inexpensive solvent at 80°C. The Fe₃O₄@Silica‐Threonine‐Pd⁰ catalyst was used for at least eight successful consecutive runs with palladium leaching of only 0.05%.     

An improved preparation of mesoporous silica‐supported Pd as sustainable catalysts for phosphine‐free Suzuki–Miyaura and Heck coupling reactions

An improved and eco‐friendly procedure has been developed to generate mesoporous silica‐supported palladium nanoparticles (SiO₂@PdNP) that could be used as a sustainable heterogeneous Pd catalyst for phosphine‐free Suzuki–Miyaura and Heck coupling reactions with excellent turnover number and turnover frequency. The presence of Pd on the silica surface was detected by X‐ray diffraction and the structural morphology of SiO₂@PdNP was obtained by transmission electron microscopy. The heterogeneous catalytic system is recyclable and leaching of the metal after the reaction is not apparently observed. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis and characterization of 4‐AMTT‐Pd(II) complex over Fe3O4@SiO2 as supported nanocatalyst for Suzuki‐Miyaura and Mizoroki‐heck cross‐coupling reactions in water

Immobilization of Pd(II) nanoparticles on silica‐coated modified magnetite particles has been readily achieved via a surface modification of Fe₃O₄ particles with 4‐amino‐5‐methyl‐4‐H‐1,2,4‐triazole‐3‐thiol (4‐AMTT) as a ligand. This magnetite nanocatalyst was characterized by various analyses such as FT‐IR, SEM/EDX, ICP‐AES, VSM, TEM, XRD, XPS and TGA. This nanocatalyst showed admirable catalytic activity for Suzuki‐Miyaura and Mizoroki‐Heck cross‐coupling reactions under mild conditions in water, and could be simply separated by an outer magnet and reused for several times.     

Ultra‐small and highly dispersed Pd nanoparticles inside the pores of ZIF‐8: Sustainable approach to waste‐minimized Mizoroki–Heck cross‐coupling reaction based on reusable heterogeneous catalyst

The rapid development of nanomaterials, particularly advanced hybrid nanoparticles, has made new opportunities for the design and fabrication of high‐performance metal‐based catalysts. However, generating metal nanoparticles of desired size without aggregation is an important challenge for enhancing the catalytic activity of metal nanoparticles supported in the host matrix. In this work, a hybrid nanoporous material, namely Pd nanoparticles@N‐heterocyclic carbene@ZIF‐8, with a high internal surface area was successfully prepared using a dispersed anionic sulfonated N‐heterocyclic carbene–Pd(II) precursor inside the cavities of zeolitic imidazolate framework (ZIF‐8) using an impregnation approach followed by reduction with NaBH₄. The anionic sulfonated N‐heterocyclic carbene was found to be a superb ligand for the stabilization of Pd nanoparticles in the pores of ZIF‐8. The resulting system was applied to the Mizoroki–Heck cross‐coupling reaction, in which the catalyst showed high catalytic activity under mild reaction conditions.     

Palladium nanoparticles supported on modified hollow Fe3O4@TiO2: Preparation,characterization, and catalytic activity in Suzuki cross‐coupling reactions

Hollow Fe₃O₄@TiO₂‐NH₂/Pd as a light‐weight, magnetically heterogeneous catalyst was successfully prepared, and characterized by using different techniques including X‐ray powder diffraction (XRD), Fourier transform infrared spectroscopy (FT‐IR), field‐emission scanning electron microscopy (FE‐SEM), transmission electron microscopy (TEM), energy‐dispersive X‐ray spectroscopy (EDX), vibrating sample magnetometer (VSM) measurements, and thermogravimetric analysis (TGA). Then this heterogeneous catalyst was tested in the Suzuki cross‐coupling reaction, and the results confirmed the success of this method. The catalyst could be separated easily using an external magnet and reused at least in five runs successfully without any appreciable loss in its catalytic activity.     

Highly efficient polymer‐stabilized palladium heterogeneous catalyst: Synthesis,characterization and application for Suzuki–Miyaura and Mizoroki–Heck coupling reactions

A suitable approach to stabilize palladium nanoparticles (Pd NPs), with an average diameter of 3–4 nm, on magnetic polymer is described. A new magnetic polymer containing 4′‐(4‐hydroxyphenyl)‐2,2′:6′,2″‐terpyridine (HPTPy) ligand was prepared by the polymerization of itaconic acid (ITC) as a monomer and trimethylolpropane triacrylate (TMPTA) as a cross‐linker and fully characterized. Pd NPs embedded on the magnetic polymer were successfully applied in Suzuki–Miyaura and Mizoroki–Heck coupling reactions under low palladium loading conditions, and provided the corresponding products with excellent yields (up to 98%) and high catalytic activities (TOF up to 257 hr^?1). Also, the catalyst can be easily separated and reused for at least consecutive five times with a small drop in catalytic activity.     

Pd immobilized on polyamide based on melamine and terephalic acid as an efficient and recyclable catalyst for Suzuki‐Miyaura coupling reaction

A simple synthetic strategy of polyamide was described from melamine and terephalic acid via one‐step polycondensation. PdCl₂ was then immobilized on the polyamide (denoted as Pd/MPA). Melamine and terephalic acid not only acted as monomers but also provided the ligand sites to help the polyamide to coordinate with Pd(II). The Pd/MPA catalyst was characterized by FT‐IR, TGA, SEM, TEM, XPS, N₂ adsorption‐desorption and atomic absorption spectroscopy. The catalyst was used in Suzuki‐Miyaura coupling reaction of various aryl halides, including less reactive chlorobenzene and benzyl chloride, to give the coupling products in moderate to excellent yields. High turnover frequencies (TOF) up to 29400 h^‐1 can be also obtained. In addition, it behaved truly as a heterogeneous catalyst with high reusability after being recycled 6 times and palladium leaching was negligible during the process. This work provides a practical polyamide support to develop heterogeneous palladium catalysts with simple synthetic procedure and low cost.