Conformational flexibility of the 1,4-dihydropyridine ring in calcium channel agonists and antagonists molecules

Conformational flexibility of the 1,4-dihydropyridine ring in 4-aryl derivatives of the 2,6-dimethyl-3,5-dicarbmethoxy-1,4-dihydropyridine has been studied using the MM3 molecular mechanics method. Change of the C=C---C---C= endocyclic torsion angle of dihydrocycle in the range of 35° entails an increase of energy less than 1 kcal mol⁻¹. The energy levels below 99% of the molecular population for each molecule were estimated. The interval of the torsion angle change for these regions is about 60°.     

Conformation of 1,4-dihydropyridine calcium channel blockers and H-bonds in a crystal

A statistical analysis of conformations for flexible 1,4-dihydropyridine calcium channel blockers, which are derivatives of nifedipine, was performed on the basis of the data deposited with the Cambridge Crystallographic Data Centre. Inequality of N and C deviations from the root-mean-square plane of the heterocycle was verified. A correlation was established between the orientation of carbonyls and their ability to form H-bonds in a crystal.     

Novel 1,4-dihydropyridine calcium antagonists. I. Synthesis and hypotensive activity of 4-(substituted pyridyl)-1,4-dihydropyridine derivatives

A series of 4-(substituted pyridyl)-1,4-dihydropyridine derivatives were synthesized and their hypotensive effects examined. Several compounds, 2-(N-benzyl-N-methylamino)ethyl methyl 1,4-dihydro-2,6-dimethyl-4-(3-nitro-2-pyridyl)-3,5-pyridinedicarboxylate (2b), its 4-(4-nitro-2-pyridyl) analogue (2g), 4-(3-trifluoromethyl-2-pyridyl) analogue (2c), 4-(2-trifluoromethyl-3-pyridyl) analogue (3e), 4-(4-cyano-2-pyridyl) analogue (2e), 4-(2-cyano-3-pyridyl) analogue (3d), and 4-(6-bromo-2-pyridyl) analogue (2i), were found to have a hypotensive activity parallel to that of nicardipine; 2c and 3e, in particular, had approximately twice the duration of nicardipine, and 2e had the most potent hypotensive activity of all the derivatives synthesized.     

Micellar electrokinetic chromatography as a fast screening method for the determination of 1,4-dihydropyridine calcium antagonists

A micellar electrokinetic chromatographic method (MEKC) was optimized for the separation of six calcium antagonists. The effects of the buffer (concentration and pH), concentration of sodium dodecyl sulphate (SDS), the organic modifier, the injection time, and the voltage applied were studied. A final appropriate electrolyte of 50 mM borate buffer, pH 8.2, containing 20 mM SDS and 15% (v/v) acetonitrile was found to provide the optimum separation with respect to resolution and migration time. The samples were introduced hydrostatically for 4 s at 50 mbar injection pressure and the applied voltage was +25 kV. The screening of the six compounds was achieved in less than 15 min: nifedipine (migration time, tm = 6.9 min), nimodipine (tm = 10.1 min), felodipine (tm = 12.2 min), nicardipine hydrochloride (tm = 12.7 min), lacidipine (tm = 13.5 min) and amlodipine besylate (tm = 14.1 min, tm = 8 min). The method developed showed to be linear at least up to 70 micrograms/ml with a detection limit of about 5 micrograms/ml for each compound. The within-day and inter-day area reproducibility (R.S.D.) were, respectively, lower than 4.8 and 8.6% for six replicate samples.     

Synthesis and antihypertensive activity of 1,4-dihydropyridine derivatives with a 4-(disubstituted phenyl) ring and an aminoalkyl ester group: highly potent and long-lasting calcium antagonists.

New 1,4-dihydropyridine derivatives bearing a 4-(disubstituted phenyl) ring and an aminoethyl ester or an amino-2,2-dimethyl-propyl ester were synthesized and their antihypertensive activities were examined in normotensive rats and spontaneously hypertensive rats. The effects of phenyl substituents and ester groups on the antihypertensive activity are discussed. Several compounds showed a more potent antihypertensive activity than nicardipine and most compounds had a longer duration of action. Among them, 7B.HCl (TC-81) showed highly potent and long-lasting activity and was selected as a candidate for further pharmacological investigations.     

Synthesis and studies of calcium channel blocking and antioxidant activities of novel 4-pyridinium and/or N-propargyl substituted 1,4-dihydropyridine derivatives

The novel 1,4-dihydropyridine derivatives containing the cationic pyridine moiety at the position 4, and the N-propargyl group as a substituent at position 1 of the 1,4-DHP cycle were designed, synthesised, and assessed in biological tests. Among all the novel compounds, the 4-(N-dodecyl) pyridinium group-containing compounds 11 (without the N-propargyl group) and 12 (with the N-propargyl group) demonstrated the highest calcium antagonistic properties against neuroblastoma SH-SY5Y (IC₅₀ about 5–14 μM) and the vascular smooth muscle A7r5 cell (IC₅₀ – 0.6–0.7 μM) lines, indicating that they predominantly target the L-type calcium channels. These compounds showed a slight total antioxidant activity. At concentrations close to those of L-type calcium channel blocking ones, compound 12 did not affect mitochondrial functioning; also, no toxicity was obtained in vivo. The N-propargyl group as a substituent at position 1 of the 1,4-DHP cycle did not essentially influence the compounds’ activity. The 4-(N-dodecyl) pyridinium moiety-containing compounds can be considered as prototype molecules for further chemical modifications and studies as cardioprotective/neuroprotective agents.     

Synthesis and binding properties of 2H-1-benzopyran-2 one fluorophore-linked calcium channel antagonist nifedipine (1,4-dihydropyridine) analogs

Nifedipine analogs I, II and III with the 2H-1-benzopyran-2-one (coumarin) fluorophore linked at the 2, 2 and 6 and 4 positions of the dihydropyridine ring were synthesized by the modified Hantzch condensation procedures. Attempts to synthesize dihydropyridine with the fluorophore at position 3 (IV) were unsuccessful.     

Development of a liquid-liquid extraction procedure for five 1,4-dihydropyridines calcium channel antagonists from human plasma using experimental design

A liquid–liquid extraction method using diethyl ether as organic solvent was optimized simultaneously for five 1,4-dihydropyridines (amlodipine, nitrendipine, felodipine, lacidipine and lercanidipine) belonging to the group of calcium channel blockers. Some experimental tools such as a full factorial design, a central composite design and the Multisimplex program were used to optimise the concentration of NaOH, volume of organic solvent and shaking time as main factors that influence the liquid–liquid extraction procedure. Following the extraction, the quantitation of the 1,4-dihydropyridines concentrations were performed by high-performance liquid chromatography with diode-array detector. Therefore, the studied compounds were separated quantitatively on a Supelcosil ABZ+Plus, 25 cm × 4.6 mm i.d., 5 μm column which was set at 30 °C, using as mobile phase, a mixture of acetonitrile–water (70:30, v/v) containing 10 mM acetate buffer (pH 5) and setting the detector at a wavelength value of 360 nm. It was concluded that the main factors that influence in the extraction process were the volume of organic solvent and the shaking time. The Multisimplex program suggested as optimal conditions an average of 6 ml of organic solvent and 23 min of shaking time. For these values, the optimised liquid–liquid extraction method showed good values of recoveries (80% for amlodipine and higher than 90% for the rest of the compounds) and low values of R.S.D. (<10%) in the reproducibility of the extraction what makes it reliable for the quantification of all the studied compounds in human plasma.     

Effects of compression on the interaction between 1,4-dihydropyridine compounds and lactose monohydrate (II): differences in powder properties of 1,4-dihydropyridine compounds

The solid-state interaction between manidipine dihydrochloride (Man) or benidipine hydrochloride (Ben) and lactose monohydrate (Lac) was investigated. An endothermic peak area at 170 degrees C was observed when their mixtures were subjected to differential scanning calorimetry (DSC) measurement, and this interaction was accelerated by compression. In the present study, dependency on the particle size of Lac was examined in this solid-state interaction. The DSC peak area at 170 degrees C as a function of the compression force profile was influenced by different particle sizes of Lac in combination with the two medicinal compounds in a different manner. The profile of the onset temperature of Lac dehydration, which indicates the degree of crystalline structure disruption, changed with differing Lac particle size. Moreover, when the particle size of Lac was large, the dehydration onset temperature of Lac with Man decreased from the lower compression force than that of Lac with Ben. The reason for this is thought to be the difference in the powder properties between Man and Ben, although the physicochemical properties of Man and Ben are similar.     

Novel 1,4-dihydropyridine calcium antagonists. II. Synthesis and antihypertensive activity of 3-[4-(substituted amino)phenylalkyl]ester derivatives

Novel 1,4-dihydropyridine derivatives bearing 3-[4-(substituted amino)phenylalkyl]ester side chains were prepared and tested for their antihypertensive activity in spontaneously hypertensive rats. Most compounds showed a more potent antihypertensive effect and a longer duration of action than nicardipine. The derivatives with a benzhydrylpiperazinyl and a benzhydrylpiperidinyl group were distinctive. 2-[4-(4-Benzhydryl-1-piperazinyl)phenyl]ethyl methyl 1,4-dihydro-2,6-dimethyl-4-(3-nitrophenyl)-3,5-pyridinedicarboxylate (4e), its 4-(4-cyano-2-pyridyl) analogue (4f), its 3-[4-(4-benzhydryl-1-piperazinyl)phenyl]propyl ester analogue (4h), its 2-[4-(4-benzhydryl-1-piperidinyl)phenyl]ethyl ester analogue (4j), and its 2-[4-(1-benzhydryl-4-piperidinyl)phenyl]ethyl ester analogue (4k) were selected as candidates for further pharmacological investigations.     

Isotachophoresis separations of enantiomers on a planar chip with coupled separation channels

The use of a poly(methylmethacrylate) chip, provided with a pair of on-line coupled separation channels and on-column conductivity detectors, to isotachophoresis (ITP) separations of optical isomers was investigated. Single-column ITP, ITP in the tandem-coupled columns, and concentration-cascade ITP in the tandem-coupled columns were employed in this investigation using tryptophan enantiomers as model analytes. Although providing a high production rate (about 2 pmol of a pure tryptophan enantiomer separated per second), single-column ITP was found suitable only to the analysis of samples containing the enantiomers at close concentrations. A 94-mm separation path in ITP with the tandem-coupled separation channels made possible a complete resolution of a 1.5 nmol amount of the racemic mixture of the enantiomers. However, this led only to a moderate extension of the concentration range within which the enantiomers could be simultaneously quantified. The best results in this respect were achieved by using a concentration-cascade of the leading anions in the tandem-coupled separation channels. Here, a high production rate, favored in the first separation channel, was followed by the ITP migration of the enantiomers in the second channel under the electrolyte conditions enhancing their detectabilities. In dependence on the migration configuration of the enantiomers, this technique made possible their simultaneous determinations when their ratios in the loaded sample were 35:1 or less (D-tryptophan a major constituent) and 70:1 or less (L-tryptophan a major constituent).     

New bismuth calcium oxysilicate with apatite structure: Synthesis and structural characterization

New bismuth calcium silicon oxide Ca₄Bi_4.3(SiO₄)(HSiO₄)₅O_0.95, with apatite structure has been synthesized. The structure was refined from powder X-ray diffraction data. The refinement revealed that the phase has P6₃/m (176) space group with unit cell parameters a=b=9.6090(7) Å, c=7.0521(7) Å, V=563.9 Å³ and c/a=0.734. The R_wp factor at Rietveld refinement was equal to 0.082. The synthesized phase has an unusual quantity of cation vacancies in a crystal lattice. Mechanisms of compensation of the excess charge of a lattice are considered and checked experimentally using the FT-IR spectroscopy, the thermal analysis and the XPS analysis.     

Study on medium ring heterocycles: synthesis and structure of novel condensed pyrazolo[1,4]diazocinones including single enantiomers

By means of a base-catalysed ring enlargement of triazapentalenoindenes resulting from diasteroselective anhydride-induced ring transformation of chiral aminoalcohol-derived zwitterionic 2,3-dihydroimidazo[2,1-a]phthalazinium-olates, a series of pyrazolo[1,5-d][1,4]diazocin-7(6H)-ones with central and conformational chirality were obtained in enantiomerically pure form. The possible reasons of the characteristic substrate- and reagent-dependency observed for the diasteroselective ring transformations of the zwitterions were interpreted in terms of the relative energetics of the crucial alternative imidazolinium intermediates disclosed by B3LYP/6-31G(d,p) calculations. The trans-annular opening of three epimeric pairs of triazapentalenoindanones afforded identical pyrazolodiazonine products. This finding suggests that the primarily formed diastereomers, having different asymmetric conformations but the same element of central chirality, undergo ring inversions in one- and two steps, respectively, involved in pathways previously established for the facile racemisation of pyrazolodiazocines with conformational chirality and hydrogen- or methyl-substituent at C1-position. The ring enlargement of triazapentalenoindanones resulted from butyric anhydride-mediated ring transformation of zwitterions with symmetrical substitution pattern afforded highly rigid 1-ethylpyrazolodiazocines in racemic form potentially separable without thermal racemisation. The constitution, conformation and relative configuration of the novel compounds were determined by ¹H-, ¹³C- and ¹⁵N-NMR methods including 2D-HSQC, 2D-HMBC and DNOE measurements and the structure of a pyrazolodiazocine was supported by single crystal X-ray diffraction.     

Crystal structure and density functional theory study on structural properties and energies of a isonicotinohydrazide compound

An X-ray and a theoretical study of the structure of the isoniazid derivative N'-(4-dimethylaminobenzylidene)-isonicotinohydrazide monohydrate (1) are reported. In this work, we will report a combined experimental and theoretical study on the molecular structure, vibrational spectra and energies of N'-(4-dimethylaminobenzylidene)-isonicotinohydrazide monohydrate. The calculated parameters are in good agreement with the corresponding X-ray diffraction values. The FTIR spectrum in the range of 400-4000 cm-1 of N'-(4-dimethylaminobenzylidene)-isonicotinohydrazide monohydrate has been recorded. The molecular geometry and vibrational frequencies and energies in the ground state are calculated by using the DFT (B3LYP, PBE1PBE) methods with 6-311G** basis sets. The calculated HOMO and LUMO energies also confirm that charge transfer occurs within the molecule. The geometries and normal modes of vibrations obtained from B3LYP/PBE1PBE/6-311G** calculations are in good agreement with the experimentally observed data.     

Solid-state polymerization of butadienes. Crystal structure and solution properties of a stereoregular amphoteric 1,4-trans-polybutadiene

The double salt 1 consisting of the hydrochloride of 6-amino-2,4-trans-hexadienoic acid and cadmium chloride in a 2:1 stoichiometry polymerizes in the crystalline state if exposed to UV or γ irradiation. A stereoregular polymeric ampholyte is formed in an extended chain macroconformation, embedded in an inorganic matrix. The crystal structure of the polymerized crystals and the solution properties of the polymer are reported. Polymerized crystals are triclinic, space group P1 , a = 7.2144 Å, b = 7.2447 Å, c = 18.5936 Å, α = 104.49°, β = 96.631°, γ = 95.706°, Z = 2. The structure consists of 2-dimensional layers of polymer and inorganic CdCl₆ octahedra alternatively stacked in the third dimension. The cadmium ions can be separated from the polymer by a precipitation as insoluble CdS. After separation from the inorganic material the polymer is soluble in strong acids and bases and insoluble in neutral water. From viscosity measurements of alkaline solutions of the polymer, an average molar mass of 4 × 10⁴ g/mol can be deduced. The polymer selectively adsorbs divalent transition metal ions if suspended in an aqueous solution of transition metal salts. The structure of the resulting polymer–metal complexes is discussed.