Simultaneous kinetic spectrophotometric determination of cyanide and thiocyanate using the partial least squares (PLS) regression

The partial least squares (PLS-1) calibration model based on spectrophotometric measurement, for the simultaneous determination of CN⁻ and SCN⁻ ions is described. The method is based on the difference in the rate of the reaction between CN⁻ and SCN⁻ ions with chloramine-T in a pH 4.0 buffer solution and at 30 °C. The produced cyanogen chloride (CNCl) reacts with pyridine and the product condenses with barbituric acid and forms a final colored product. The absorption kinetic profiles of the solutions were monitored by measuring absorbance at 578 nm in the time range 20-180 s after initiation of the reaction with 2 s intervals. The experimental calibration matrix for partial least squares (PLS-1) calibration was designed with 31 samples. The cross-validation method was used for selecting the number of factors. The results showed that simultaneous determination could be performed in the range 10.0-900.0 and 50.0-1200.0 ng mL⁻¹ for CN⁻ and SCN⁻ ions, respectively. The proposed method was successfully applied to the simultaneous determination of cyanide and thiocyanate in water samples.     

Simultaneous determination of Sb(III) and Sb(V) by partial least squares regression

A method for simultaneous spectrophotometric determination of Sb(III) and Sb(V) using multivariate calibration method is proposed. This method is based on the development of the reaction between the analytes and pyrogallol red at pH 2.00. The selection of variables was studied. A series of synthetic solutions containing different concentrations of Sb(III) and Sb(V) were used to check the prediction ability of the partial least squares model. The calibration curves were linear over the range of 0.3-3.4 and 0.3-3.0 μg ml⁻¹ for Sb(III) and Sb(V), respectively. The detection limits were 0.177 and 0.200 μg ml⁻¹ for Sb(III) and Sb(V), respectively.     

Spectroscopic evaluation of Co(II), Ni(II) and Cu(II) complexes derived from thiosemicarbazone and semicarbazone

Co(II), Ni(II) and Cu(II) complexes were synthesized with thiosemicarbazone (L(1)) and semicarbazone (L(2)) derived from 2-acetyl furan. These complexes were characterized by elemental analysis, molar conductance, magnetic moment, mass, IR, electronic and EPR spectral studies. The molar conductance measurement of the complexes in DMSO corresponds to non-electrolytic nature. All the complexes are of high-spin type. On the basis of different spectral studies six coordinated geometry may be assigned for all the complexes except Co(L)(2)(SO(4)) and Cu(L)(2)(SO(4)) [where L=L(1) and L(2)] which are of five coordinated square pyramidal geometry.     

Simultaneous spectrophotometric determination of Sn(II) and Sn(IV) by mean centering of ratio kinetic profiles and partial least squares methods

Two spectrophotometric methods are described for the simultaneous determination of binary mixtures of Sn(II) and Sn(IV) in water samples and fruit juice samples, without prior separation steps, using the mean centering of ratio kinetic profiles and partial least squares (PLS) methods. The methods are based on the difference in the rate of the reactions of Sn(II) and Sn(IV) with pyrocatechol violet at pH 4.0. The methods allow rapid and accurate determination of Sn(II) and Sn(IV). The analytical characteristics of the methods for the simultaneous determination of binary mixtures of Sn(II) and Sn(IV) were calculated. The results showed that the methods were capable to simultaneous determination of 0.1–1.80 mg L⁻¹ each of cations. The proposed methods were successfully applied to the simultaneous determination of Sn(II) and Sn(IV)in an orange juice sample.     

Artificial neural networks for simultaneous spectrophotometric differential kinetic determination of Co(II) and V(IV)

A method for simultaneous analysis of V(IV) and Co(II) has been developed by using artificial neural network (ANN). This method is based on the difference of the chemical reaction rate of V(IV) and Co(II) with Fe(III) in the presence of chromogenic reagent, 1,10-phenanthroline. The reduced product of the reaction, Fe(II), can form a colored complex with 1,10-phenanthroline and make a visible spectrophotometric signal for indirect monitoring of the V(IV) and Co(II) concentrations. Feed forward neural networks have been trained to quantify considered metal ions in mixtures under optimum conditions. The networks were shown to be capable of correlating reduced spectral kinetic data using principal component analysis (PCA) of mixtures with individual metal ion. In this way an ANN containing three layers of nodes was trained. Sigmoidal and linear transfer functions were used in the hidden and output layers, respectively, to facilitate nonlinear calibration. Both V(IV) and Co(II) were analyzed in the concentration range of 0.1-4.0 μg ml⁻¹. The proposed method was also applied satisfactorily to the determination of considered metal ions in several synthetic and water samples.     

Synthesis and characterization of a new pyrrolidine containing sulfur ligand and the transition metal complexes of Co(II), Ni(II) and Cu(I)

Potassium 1,3-dipyrrolidinopropan-2-O-xanthate (LK), and its complexes with Co(II), Ni(II) and Cu(I) have been prepared and characterized as [CoL₂(H₂O)₂]?·?2H₂O, [NiL₂(H₂O)₂] and CuL?·?2H₂O by FT-IR, ¹H and ¹³C NMR spectroscopies, elemental analyses, magnetic susceptibility and TGA techniques.     

Synthesis and characterization of potassium 1,3-bis(N-methylpiperazino)propan-2-O-xanthate and the complexes of Co(II), Ni(II) and Cu(I) ions

Potassium 1,3-bis(N-methyl piperazino)propan-2-O-xanthate (LK), and its complexes with Co(II), Ni(II) and Cu(I) ions have been prepared and characterized as [CoL₂(H₂O)₂], [NiL₂(H₂O)₂]·2H₂O and CuL·2H₂O by FT-IR, ¹H and ¹³C?NMR spectroscopies, elemental analyses, magnetic susceptibility and TGA techniques.     

Bioactive Co(II), Ni(II), and Cu(II) Complexes Containing a Tridentate Sulfathiazole-Based (ONN) Schiff Base

New Co(II), Ni(II), and Cu(II) complexes were synthesized with the Schiff base ligand obtained by the condensation of sulfathiazole with salicylaldehyde. Their characterization was performed by elemental analysis, molar conductance, spectroscopic techniques (IR, diffuse reflectance and UV–Vis–NIR), magnetic moments, thermal analysis, and calorimetry (thermogravimetry/derivative thermogravimetry/differential scanning calorimetry), while their morphological and crystal systems were explained on the basis of powder X-ray diffraction results. The IR data indicated that the Schiff base ligand is tridentate coordinated to the metallic ion with two N atoms from azomethine group and thiazole ring and one O atom from phenolic group. The composition of the complexes was found to be of the [ML₂]∙nH₂O (M = Co, n = 1.5 (1); M = Ni, n = 1 (2); M = Cu, n = 4.5 (3)) type, having an octahedral geometry for the Co(II) and Ni(II) complexes and a tetragonally distorted octahedral geometry for the Cu(II) complex. The presence of lattice water molecules was confirmed by thermal analysis. XRD analysis evidenced the polycrystalline nature of the powders, with a monoclinic structure. The unit cell volume of the complexes was found to increase in the order of (2) < (1) < (3). SEM evidenced hard agglomerates with micrometric-range sizes for all the investigated samples (ligand and complexes). EDS analysis showed that the N:S and N:M atomic ratios were close to the theoretical ones (1.5 and 6.0, respectively). The geometric and electronic structures of the Schiff base ligand 4-((2-hydroxybenzylidene) amino)-N-(thiazol-2-yl) benzenesulfonamide (HL) was computationally investigated by the density functional theory (DFT) method. The predictive molecular properties of the chemical reactivity of the HL and Cu(II) complex were determined by a DFT calculation. The Schiff base and its metal complexes were tested against some bacterial strains (Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, and Bacillus subtilis). The results indicated that the antibacterial activity of all metal complexes is better than that of the Schiff base.     

偏最小二乘紫外分光光度法同时测定甲基苯甲醛三种同分异构体

将偏最小二乘法(PLS)用于紫外分光光度数据的解析,建立了同时测定甲基苯甲醛3种同分异构体的模型。在230～304 nm范围内,将测得的48个样品的吸光度值作为校正集,另18个样品的吸光度值作为预测集用于建模。所建立的邻、间、对甲基苯甲醛模型的平均回收率分别为101.2%、100.2%和98.9%;均方根误差(RMSE)分别为0.2667、0.3853和0.2118;预测浓度范围分别为4.6～16.2μg/mL、5.8～17.4μg/mL和6.5～20.6μg/mL。讨论了混合物中3种同分异构体浓度比例对测定结果的影响,并确定了最佳的浓度比例范围。对模拟样品进行加标回收率试验。并通过与顺、反丁烯二酸两种同分异构体测定结果的比较,得出了有意义的结论。     

Synthesis and characterization of Cu(II), Co(II) and Ni(II) coordination polymers containing bis(imidazolyl) ligands

Two structurally related flexible imidazolyl ligands, bis(N-imidazolyl)methane (L₁) and 1,4-bis(N-imidazolyl)butane (L₂), were reacted with Cu(II), Co(II) and Ni(II) salts of aliphatic/aromatic dicarboxylic acids resulting in the formation of a number of novel metal–organic coordination architectures, [CuB₂(ox)₂(L₁)₂(H₂O)₂] · 4H₂O (1) (ox = oxalate), [Cu(pdc)(L₂)_1.5] · 4H₂O (2, pdc = pyridine-2,6-dicarboxylate), [Co(L)₂(H₂O)₂](tp) · 4H₂O (3, tp = terephthalate), [Ni(L₁)₂(H₂O)₂](ip) · 5H₂O (4, ip = isophthalate), [Cu₂(L₁)₄(H₂O)₄](tp)₂ · 7H₂O (5), [Co(mal)(L₁)(H₂O)] · 0.5MeOH (6, mal = malonate), [Co(pdc)(L₁)(H₂O)] (7). All the complexes have been structurally characterized by X-ray diffraction analysis. The different coordination modes of the dicarboxylate anions, due to their chain length, rigidity and diimidazolyl functionality, lead to a wide range of different coordination structures. The coordination polymers exhibit 1D single chain, ladder, 2D sheet and 2D network structures. The aliphatic and aromatic dicarboxylates can adopt chelating μ₂ and chelating-bridging μ₃ coordination modes, or act as uncoordinated counter anions. The central metal ions are coordinated in N₂O₄, N₄O₂, N₂O₃ and N₃O₃ fashions, depending on the ancillary ligands. The topology of 1 gives rise to macrocycles which are connected through hydrogen bonds to form 1D chains, whereas compound 2 exhibits a 1D polymeric ladder in which the carboxylate acts as a pincer ligand. Compounds 3–5 show doubly bridged 1D chains, and the dicarboxylate groups are not coordinated but form 2D corrugated sheets with water molecules intercalated between the cationic layers. Compound 6 has a 2D network sheet structure in which each metal ion links three neighboring Co atoms by the bis(N-imidazolyl)methane ligand. The cobalt compound 7, with a 2D polymeric double sheet structure, is built from pincer carboxylate (pdc) and 1,4-bis(N-imidazolyl)methane ligands.     

Coordination compounds of Co(II), Ni(II) and Cu(II) with capric acid hydrazide

The reaction of aquo-ethanolic solutions of Co(II), Ni(II) and Cu(II) salts and ethanolic solution of capric acid hydrazide (L) yielded paramagnetic, high-spin bis- and tris(ligand) chelate complexes. The tris(ligand) complexes, [ML ₃]X ₂·nH₂O [M=Co(II), Ni(II);X=NO ₃ ^– , ClO ₄ ^– , 1/2SO ₄ ^2– ], have an octahedral structure formed on account of the bidentate (NO) coordination of three neutral hydrazide molecules. In the bis(ligand) complexes,ML ₂(NCS)₂ [M=Co(II), Ni(II)] and CuL ₂ X ₂·nH₂O (X=NO ₃ ^– , ClO ₄ ^– and 1/2SO ₄ ^2– ), the oxoanions and NCS^– take also part in coordination. The complexes have been characterized by elemental analysis, IR spectra, magnetic measurements, molar conductivity and TG analysis.

---

Caprinsäurehydrazid-Komplexe von Co(II), Ni(II) und Cu(II)

Zusammenfassung Durch die Reaktion von wäßrig-ethanolischen Lösungen von Co(II)-, Ni(II)-und Cu(II)-Salzen mit einer ethanolischen Lösung von Caprinsäurehydrazid (L) wurden paramagnetische high-spin Bis- und Tris-Ligand-Chelatkomplexe erhalten. Tris-Ligand-Komplexe des Typs [ML ₃ X ₂·nH₂O [M=Co(II), Ni(II);X=NO ₃ ^– , ClO ₄ ^– , 1/2SO ₄ ^2– ], die eine oktaedrische Struktur besitzen, entstehen durch die Koordination von drei neutralen zweizähnigen (NO)-Hydrazidmolekülen. Bei den Bis-Ligand-KomplexenML ₂(NCS)₂ [M=Co(II), Ni(II)], sowie bei den Bis-Ligand-Komplexen CuL ₂ X ₂·nH₂O (X=NO ₃ ^– , ClO ₄ ^– , 1/2SO ₄ ^2– ) nehmen bei der Koordination außer Hydrazid auch die Säurereste teil. Die Komplexe wurden durch Elementaranalyse, IR-Spektren, magnetische Messungen, molare Leitfähigkeit und TG-Analysen charakterisiert.

     

Simultaneous kinetic determination of Fe(II) and Fe(III) based on their reactions with NQT4S in micellar media by using PLS and PCR methods

Simultaneous determination of Fe(II) and Fe(III) was studied using partial least squares regression (PLS) and principal component regression (PCR) methods. The models were based on the difference observed in the rates of the complex formation of iron in its two oxidation states with 1,2-naphthaquinone-2-thiosemicarbazone-4-sulphonic acid (NQT4S) at pH 4.0 in cetyltrimethylammoniumbromide (CTAB) as micellar media. The results showed that simultaneous determination of Fe(II) and Fe(III) could be performed in their concentration ranges of 0.10-2.10 and 0.25-2.25 μg/ml, respectively. The models used can proceed the data with low percent relative error of prediction (i.e. <5.5%). The procedure was successfully applied for the simultaneous determination of Fe(II) and Fe(III) in some environmental samples. The method would allow the transformation of the two oxidation states of iron to be monitored overtime in a water sample.     

Simultaneous quantitative analysis of overlapping spectrophotometric signals using wavelet multiresolution analysis and partial least squares

The mathematical bases and program algorithms of discrete wavelet transform (DWT), multiresolution and Mallat’s pyramid algorithm were described. The multiresolution analysis (MRA) based on Daubechies orthogonal wavelet basis was studied as a tool for removing noise and irrelevant information from spectrophotometric spectra. After wavelet MRA pre-treatment, eight error functions were calculated for deducing the number of factors. A partial least squares based on wavelet MRA (WPLS) method was developed to perform simultaneous spectrophotometric determination of Fe(II) and Fe(III) with overlapping peaks. Data reduction was performed using wavelet MRA and principal component analysis (PCA) algorithm. Two programs, SPWMRA and SPWPLS, were designed to perform wavelet MRA and simultaneous multicomponent determination. Experimental results showed the WPLS method to be successful even where there was severe overlap of spectra.     

Source contributions to ambient aerosol calculated by discriminat partial least squares regression (PLS)

Partial least squares regression (PLS) is proposed for solving ir pollution source apportionment problems as an alternative method to the frequently used chemical mass balance technique. A discriminant PLS is used to calculate linear mixing proportions for a synthetic ambient aerosol data set where the truth is known. Without sacrificing orthogonality of the source profiles, PLS can resolve the emission sources and accurately predict the emission source contributions. Further extensions of the PLS approach to environmental receptor modelling are discussed.     

偏最小二乘分光光度法同时测定痕量铁、锰、铜、锌、钴和镍

痕量Fe^3 ,Mn^2 ,Cu^2 ,Zn^2 ,Co^2 ,Ni^2 与2－（5－溴－2－吡啶偶氮）－5－二乙氨基苯酚（5－Br-PADAP)和溴化十六烷基三甲基铵（CTMAB）在PH8．3时发生高灵敏显色反应，所形成的三元胶束络合的吸收光谱严重重叠，采用偏最小二乘法（PLS）辅助分光光度法测定了合成试样及饲料中上述6种痕量组分，结果表明，PLS法是化学计量学中一种可适用于基体较复杂的实际试样中痕量组分分光度同时测定的多元计算方法。     

Thermal, spectral and magnetic characterization of Co(II), Ni(II) AND Cu(II) 4-chloro-2-nitrobenzoates

Physico-chemical properties of 4-chloro-2-nitrobenzoates of Co(II), Ni(II), and Cu(II) were studied. The complexes were obtained as mono- and trihydrates with a metal ion to ligand ratio of 1:2. All analysed 4-chloro-2-nitrobenzoates are polycrystalline compounds with colours depending on the central ions: pink for Co(II), green for Ni(II), and blue for Cu(II) complexes. Their thermal decomposition was studied only in the range of 293–523 K, because it was found that on heating in air above 523 K 4-chloro-2-nitrobenzoates decompose explosively. Hydrated complexes lose crystallization water molecules in one step and anhydrous compounds are formed. The final products of their decomposition are the oxides of the respective transition metals. From the results it appears that during dehydration process no transformation of nitro group to nitrite takes place. The solubilities of analysed complexes in water at 293 K are of the order of 10^–4–10^–2 mol dm^–3. The magnetic moment values of Co²⁺, Ni²⁺ and Cu²⁺ ions in 4-chloro-2-nitrobenzoates experimentally determined at 76–303 K change from 3.89 to 4.82 μ_B for Co(II) complex, from 2.25 to 2.98 μ_B for Ni(II) 4-chloro-2-nitrobenzoate, and from 0.27 to 1.44 μ_B for Cu(II) complex. 4-chloro-2-nitrobenzoates of Co(II), and Ni(II) follow the Curie–Weiss law. Complex of Cu(II) forms dimer.     

偏最小二乘-分光光度法同时测定福美锌和代森锰农药残留量

利用紫外可见分光光度法研究了农药福美锌和代森锰与苯基荧光酮的相互作用,发现反应后的产物分别在波长为551和554 nm处最大有吸收,但光谱严重重叠.实验采集了450～700 nm波长范围吸光度数据,并对该数据进行一阶求导后用偏最小二乘法处理,据此建立了偏最小二乘-分光光度法同时测定福美锌和代森锰两种农药的新方法.福美锌和代森锰的线性范围分别为0.3～6.0和0.2～3.5 μg/mL;检出限分别为0.22和0.13 μg/mL.混合样品分析无需分离,方法简单、快速.用于水果、大米和自来水等实际样品测定.     

Thermal, spectral and magnetic behaviour of 2,3,4-trimethoxybenzoates of Mn(II), Co(II), Ni(II) AND Cu(II)

Four new complexes of 2,3,4-trimethoxybenzoic acid anion with manganese(II), cobalt(II), nickel(II) and copper(II) cations were synthesized, analysed and characterized by standard chemical and physical methods. 2,3,4-Trimethoxybenzoates of Mn(II), Co(II), Ni(II) and Cu(II) are polycrystalline compounds with colours typical for M(II) ions. The carboxylate group in the anhydrous complexes of Mn(II), Co(II) and Ni(II) is monodentate and in that of Cu(II) monohydrate is bidentate bridging one. The anhydrous complexes of Mn(II), Co(II) and Ni(II) heated in air to 1273 K are stable up to 505–517 K. Next in the range of 505–1205 K they decompose to the following oxides: Mn₃O₄, CoO, NiO. The complex of Cu(II) is stable up to 390 K, and next in the range of 390–443 K it loses one molecule of water. The final product of its decomposition is CuO. The solubility in water at 293 K is of the order of 10^–3 mol dm^–3 for the Mn(II) complex and 10^–4 mol dm^–3 for Co(II), Ni(II) and Cu(II) complexes. The magnetic moment values of Mn²⁺, Co²⁺, Ni²⁺ and Cu²⁺ ions in 2,3,4-trimethoxybenzoates experimentally determined in the range of 77–300 K change from 5.64–6.57 μB (for Mn²⁺), 4.73–5.17 μB (for Co²⁺), 3.26–3.35 μB (for Ni²⁺) and 0.27–1.42 μB (for Cu²⁺). 2,3,4-Trimethoxybenzoates of Mn(II), Co(II) and Ni(II) follow the Curie–Weiss law, whereas that of Cu(II) forms a dimer.     

Synthesis and characterization of Co(II), Ni(II), Zn(II) and Cu(II) complexes with a new tetraazamacrocyclic Schiff base ligand containing a piperazine moiety: X-ray crystal structure determination of the Co(II) complex

Two macrocyclic Schiff base ligands, L¹ [1+1] and L² [2+2], have been obtained in a one-pot cyclocondensation of 1,4-bis(2-formylphenyl)piperazine and 1,3-diaminopropane. Unfortunately, because of the low solubility of both ligands, their separation was unsuccessful. In the direct reaction of these mixed ligands (L¹ and L²) and the appropriate metal ions only [CoL¹(NO₃)]ClO₄, [NiL¹](ClO₄)₂, [CuL¹](ClO₄)₂ and [ZnL¹(NO₃)]ClO₄ complexes have been isolated. All the complexes were characterized by elemental analyses, IR, FAB-MS, conductivity measurements and in the case of the [ZnL¹(NO₃)]ClO₄ complex with NMR spectroscopy.