NiⅡ-NTA修饰的银纳米粒/多孔硅芯片在线分离组氨酸标记蛋白和MALDI-TOF质谱检测

本文通过沉积在多孔硅表面的银纳米粒吸附对氨基苯硫酚和氨基的化学转化得到终端为Ni^Ⅱ-Nα,Nα-二(羧甲基)-L-赖氨酸水合物-即 Ni^Ⅱ-NTA体系的芯片。Ni^Ⅱ-NTA修饰的芯片被用于从高浓度的盐和助溶剂的缓冲体系中亲和捕获组氨酸标记的融合蛋白：thioredoxin-urodilatin和SUMO-hu-aprotinin,并进行在线的MALDI-TOF质谱检测,克服了MALDI-TOF质谱中直接点样污染物妨碍样品与基质共结晶的问题,避免了繁琐的离线样品预处理。芯片在线分离、纯化和MALDI-TOF质谱分析体系有望在复杂或原始体液的溶液中分析目标分子。     

帽状银纳米粒子的制备及表面增强拉曼活性研究

采用真空热蒸发法在自组装的单层阵列二氧化硅纳米粒子表面沉积银膜制备了帽状银纳米粒子。通过透射电镜(TEM)、扫描电镜(SEM)和紫外-可见-近红外分光光度计 (UV-Vis-NIR)对其表面形貌及光学性质进行了表征。以吡啶-(2-偶氮-4)间苯二酚作为探针分子，研究了该复合纳米粒子的表面增强拉曼散射 (SERS) 活性，增强因子高达2.88×10⁶。结果表明在二氧化硅纳米粒子表面制备的帽状银纳米粒子是很好的表面增强拉曼散射活性基底。     

苯硫酚及其衍生物在银电极表面的吸附取向

采用表面增强拉曼光谱技术研究了苯硫酚及其功能衍生物，对巯基苯胺和对苯硫酚在粗糙银电极上的吸附取向特征。结果表明：虽然3种分子的结构类似，但对位取代基直接影响各分子在电极上的吸附取向。3种分子都通过硫原子与银电极形成S-Ag键吸附在电极表面。苯硫酚采用倾斜的方式吸附，使得苯环与基底间表现一定程度的相互作用；吸附的对巯基苯胺则因质子化氨基间的静电相互作用而完全垂直于电极表面；而对苯硫酚则采用平躺于电极表面的方式吸附，致使苯环π体系与基底银之间具有较强的相互作用。     

银纳米颗粒负载阶层多孔二氧化硅块体的制备及表征

以溶胶-凝胶伴随相分离法制备的阶层多孔二氧化硅作为载体,3-氨丙基三乙氧基硅烷（APTES）为改性剂,乙醇为还原剂,在阶层多孔二氧化硅固体骨架上进行银纳米颗粒均匀负载. 利用扫描电镜（SEM）、透射电镜（TEM）、X射线衍射（XRD）、汞压、N₂吸附/脱附、X射线光电子能谱（XPS）等测试技术对银纳米颗粒负载阶层多孔二氧化硅进行了表征,探讨了APTES表面改性、乙醇还原机理以及银纳米颗粒负载块体的孔结构特征变化规律. 结果表明：APTES表面改性将氨基接枝于阶层骨架上,氨基与银离子形成银氨离子,银氨离子经乙醇还原后将平均粒径约16 nm的银纳米颗粒成功负载于二氧化硅的大孔及介孔内部;负载后的阶层多孔块体的大孔骨架未受到破坏,但其比表面积由418 m²·g^-1下降到254 m²·g^-1,两次还原负载能提高银纳米颗粒的负载量.     

银纳米粒子簇的设计、 制备和表面增强拉曼光谱

通过匹配激光光斑直径与胶体微球的尺寸, 设计制备了银纳米粒子的表面增强拉曼散射(SERS)基底, 并将其用于研究单个银纳米粒子簇的表面增强拉曼光谱. 在制备纳米粒子的过程中, 考察了等离子体刻蚀时间与银沉积厚度对“单”银纳米粒子结构与形貌的影响. 将吡啶、 巯基苯和罗丹明R6G作为SERS探针分子, 研究了其SERS效应, 通过荧光共振能量转移(FRET)机理, 实现了染料分子在单银纳米粒子簇上的SERS效应. SERS光谱测试与相关计算结果表明, 单个银纳米粒子簇的拉曼增强因子能够达到约10⁶.     

基于银镜的高灵敏表面增强拉曼光谱基底制备及其用于呋喃唑酮检测

采用化学沉积法制备了表面增强拉曼散射光谱(SERS)银镜基底,用NaCl溶液与HCl溶液除去银镜表面杂质后,通过扫描电子显微镜对基底进行了表征,表明该基底表面的银纳米粒子平均粒径约为200 nm,以对巯基苯胺为探针分子测得其增强因子为4.6×105.利用表面增强拉曼光谱及表面吸附选择定律研究了广谱抗菌药呋喃唑酮在该基底表面的吸附状态,证明呋喃唑酮分子主要是通过CN吸附于银纳米粒子表面的.     

银纳米枝的合成及表面增强拉曼效应

利用硝酸银与铜之间发生置换反应原理, 在铜箔上得到了有序的银纳米枝结构, 用十二烷基磺酸钠(SDS)为表面活性剂, 通过调控前驱体硝酸银的浓度, 可在铜箔上得到不同密度的银纳米枝. 表面拉曼增强实验结果表明, 当分别以对巯基苯胺(4-ATP)、腺嘌呤和罗丹明G6为探针分子时, 有序的银纳米枝结构比无序的银纳米粒子具有更好的拉曼增强活性; 且随银纳米枝密度的增加, 表面拉曼增强活性有所提高. 该有序的银纳米枝结构是较好的表面增强拉曼(SERS)活性基底, 在有机分子和生物分子的SERS检测方面将具有一定的应用前景.     

纳米金淀积的多孔硅靶增强样品的激光解吸/电离质谱信号

硅片类型和多孔硅结构的多样性影响了多孔硅表面的激光解吸/离子化质谱(DIOS)(无辅助基质的激光解吸/电离飞行时间质谱(LDI-TOF-MS))数据的重复性和靶的耐储时间。本工作通过在多孔硅的表面淀积金纳米颗粒并将其作为目标靶来增强软物质分子如聚乙二醇和多肽的激光解吸/电离质谱信号。纳米金的淀积钝化了多孔硅表面的Si-H活性基团,增加了靶的耐储时间。用场发射扫描电镜表征了多孔硅淀积金纳米颗粒前后的形貌,用X射线能量色散光谱法分析金的百分含量,结果表明其含量随沉积时间的延长而增加。激光解吸/电离质谱信号的增强可能是由多孔硅及其支持的金纳米颗粒的光学和物理性质引起的,该类型的样品靶在激光解吸/电离飞行时间质谱的应用上结合了多孔硅和金纳米颗粒的双重优势。     

Au@SiO2核壳纳米粒子的制备及其表面增强拉曼光谱

采用柠檬酸钠还原氯金酸法制备金溶胶, 以正硅酸乙酯(TEOS)为硅源, 氨水作催化剂, 制备以金为核, 二氧化硅为壳的核壳纳米粒子. 金纳米粒子的粒径可以通过柠檬酸钠和氯金酸的比例控制, 通过调节TEOS的量和反应的时间可以控制二氧化硅壳层的厚度. 以苯硫酚为探针分子研究了核壳结构纳米粒子的表面增强拉曼散射(SERS)效应与二氧化硅壳层厚度之间的关系. 研究结果表明, 金内核电磁场增强效应随着二氧化硅壳层厚度的增加逐渐减弱, 且其衰减速度比具有相同尺度的双金属核壳结构纳米粒子的慢. 此外, 探针分子主要以物理作用吸附在二氧化硅的表面, 可通过洗涤方法将探针分子除去, 从而可使该复合结构基底用于循环SERS分析.     

用3A分子筛作模板构建灵敏的表面增强拉曼光谱银基底

成功地制备了一种灵敏的表面增强拉曼散射(SERS)银基底。即以3A分子筛为模板,以葡萄糖为还原剂,通过改善的银镜反应在分子筛上建构银壳,再用稀氢氟酸去掉分子筛核制备由带有平的内表面的平板堆砌而成的聚集体。通过扫描电子显微镜观测了其大小和形貌,通过X-射线粉末衍射仪研究了其结构。以4-羟基苯硫酚(4-MPH)为探针分子,考察了其SERS活性,与在玻璃基底上构建的银纳米粒子和商品微米银粉末相比,吸附在该平板银聚集体上的4-MPH在~1078 cm-1处谱带的SERS峰强度是吸附在以玻璃为基底的银纳米粒子的40倍左右,是吸附在商品微米银粉末的13倍左右。通过计算,该SERS活性基底的增强因子约为2.8×105。这种灵敏的SERS基底容易制备,成本合适,在设计、开发SERS光谱探针装置等方面有很好的应用前景。     

Improved Surface Enhanced Raman Scattering for Nanostructured Silver on Porous Silicon for Ultrasensitive Determination of 2,4,6-Trinitrotoluene

Label-free and low-cost surface-enhanced Raman scattering-active substrates of silver nanostructures on porous silicon have been synthesized. The morphology and spectroscopic properties were investigated as a function of concentration and immersion time. The enhancement factor of optimized silver-porous silicon substrate was estimated to be 2.18 × 10⁸ by the use of p-thiocresol as a Raman probe. The optimized substrate was used to determine 50 pg of 2,4,6-trinitrotoluene. These results demonstrate that the prepared silver-porous silicon substrates are promising for the ultra-sensitive determination of organic molecules.     

Preparation and characterization by surface-enhanced infrared absorption spectroscopy of silver nanoparticles formed on germanium substrates by electroless displacement

In this paper, the feasibility of applying electroless displacement to prepare silver nanoparticles (AgNPs) on the surface of germanium (Ge) substrate is demonstrated, and the performances of surfaces prepared in this manner for surface-enhanced infrared absorption (SEIRA) spectroscopy are reported. The process used to produce suitable AgNPs for SEIRA by electroless deposition is simple and effective, requiring only pretreatment of the germanium surface with hot air, immersion of the substrate in a dilute solution of silver nitrate, and washing of the resulting plate. To quantify the behavior of AgNPs on a Ge substrate and to optimize the conditions for the preparation of AgNPs on Ge substrates, a monolayer of p-nitrothiophenol (PNTP) was bonded to the surface of the AgNPs by immersion of the plate in a dilute solution of PNTP and measurement of the transmission spectrum. The factors that influenced the formation of AgNPs, and hence the SEIRA signals, included the concentration of AgNO₃, the reaction time and the temperature. Results indicated that stronger absorption bands in the SEIRA spectrum of a monolayer of PNTP were obtained if the reaction rate for the displacement of silver ions by Ge was slow. This condition was achieved by keeping the concentration of AgNO₃ and the reaction temperature low. Under the optimal conditions found in this work, an enhancement factor of approximately 100 was achieved for commonly used probe molecules in SEIRA measurements.     

ATR-SEIRAS study of the adsorption of acetate anions at chemically deposited silver thin film electrodes

The adsorption of acetate anions at silver thin film electrodes has been studied by in-situ infrared spectroscopy experiments with a Kretschmann internal reflection configuration. Stable silver thin films were chemically deposited on germanium substrates. Ex-situ STM images show mean grain sizes ranging from ca. 20 to 90 nm for deposition times between 2 and 20 min, respectively. The thickness of the silver film, measured by AFM, is typically around 10 nm for a deposition time of 10 min and increases up to 50 nm for a deposition time of 20 min. Roughness factors around 2.3 have been obtained for the silver films from the charge involved in lead underpotential deposition (UPD). A noticeable enhancement of the infrared absorption of adsorbed species (SEIRA effect) is observed when the silver films are used as electrodes under internal total reflection conditions. Maximum intensities of the adsorbate bands were observed for a deposition time of 10 min and an angle of incidence around 65 degrees . The potential-dependent infrared spectra of acetate and interfacial water are consistent with previously proposed models involving the existence of weakly hydrogen-bonded water molecules at potentials below the potential of zero charge and the reorientation of water molecules at potentials above the potential of zero charge. Results reported in this work suggest a weak interaction between acetate and water molecules adsorbed at the silver thin film electrodes.     

Surface Enhanced Raman Spectroscopy on Carbon Filaments

 A method for analysis of carbon-containing thin films by using surface enhanced Raman spectroscopy (SERS) is described. Thin films of boron nitride or silicon carbide which are deposited on carbon filaments were coated additionally with silver nanoparticles. A very thin plasma polymer film was deposited on the silver particles to give a better long time stability. Using these layers, very intensive carbon band were detected.     

Surface-enhanced vibrational investigation of adsorbed analgesics

Adsorption properties of acetylsalicylic acid (AA), ibuprofen and acetaminophen deposited from volatile solvents with varying protic/aprotic properties on vacuum-evaporated silver films were characterized using surface-enhanced infrared absorption (SEIRA) and surface-enhanced Raman spectroscopy (SERS). SERS preferentially enhances monolayer Raman shifts, while SEIRA can enhance the infrared absorbance of the monolayer and multilayers. To our best knowledge, this is the first reported study of these molecules using a combination of SERS/SEIRA. SERS revealed that AA and ibuprofen adsorbed ionically in monolayers, independent of the deposition solvents used in the process. SEIRA experiments showed that AA multilayers condensed molecularly using a deposition solvent with polar bonds. However, when an alkane deposition solvent with non-polar bonds such as n-heptane was used, AA adsorbed as acetylsalicylate ions in the first few multilayers, while ibuprofen always adsorbed as the free acid in the multilayer. These ionization trends depend upon the affinity of AA and ibuprofen for the underlying silver film. TPD experiments on silver powders further demonstrated that ibuprofen affinity for silver was less than AA. Furthermore, SEIRA indicated that acetaminophen adsorbed as multilayers of metastable polymorphs using protic or polar aprotic deposition solvents. Protic deposition solvents gave higher quality SERS spectra of an acetaminophen monolayer in comparison to polar aprotic deposition solvents. Such studies could find significant applications in biochemical and nanotechnology processes such as drug delivery, catalysis, and tissue engineering and will contribute to the understanding of the impact and fate of analgesics released into the environment.     

Infrared-optical properties of vapour-deposited metal films

Spectroscopic infrared ellipsometry was applied to determine the optical constants of thin metal layers deposited on dielectric substrates such as glass or CaF(2). The layers were produced by evaporating gold or silver in a vacuum, and the coverage, that is the deposited mass per area, was chosen in the range 80-1200 mg m(-2) for gold, which refers to thicknesses in the lower nanometer range; in the case of the specifically lighter silver, about half the coverage was applied. At low coverage a metal island structure is obtained, which gives rise to surface-enhanced infrared absorption (SEIRA). Depending on the coverage, the deposited films exhibit either dielectric or metallic optical properties. Atomic force microscopy and conductivity measurements complement the spectroscopic observation.     

Contact probe electrochemical characterization and metal speciation of silver LLDPE nanocomposite films

A contact probe methodology, based on the voltammetry of immobilized microparticle approach, is used for characterizing silver species present in linear low density polyethylene (LLDPE) films with different Ag(I)/Ag(0) ratios and silver nanoparticle features usable as food contact polymers. The films displayed characteristic voltammetric features in contact with aqueous acetate buffer, in particular signals for the stripping oxidation of nanoparticulate Ag systems. Significant differences between the studied films were also observed by means of electrochemical impedance spectroscopy and detected at the nanoscopic scale using electrochemical scanning microscopy. Differences in optical and thermal properties of the studied films are associated with the presence of silver nanoparticles. The silver oxidation state as well as nanoparticle size also had influence on the oxidative resistance of the LLDPE films; indeed, films containing cationic silver showed the lowest oxidation induction time value.     

Characterization of aminophenol isomer adsorption on silver nanostructures

Surface-enhanced infrared absorption (SEIRA), temperature-programmed desorption, and density functional theory calculations were used to explore the adsorption of aminophenol isomers on vacuum deposited silver films and silver powder. Salts of the aminophenolate ions were synthesized to aid in vibrational spectral interpretation. No evidence for dissociation of any of the aminophenols into aminophenolate ions in the monolayer or multilayer was found when adsorbed on silver nanostructures (SNS). SEIRA demonstrated additional hydrogen-bonding interactions in a multilayer of 2-aminophenol and 3-aminophenol adsorbed on SNS beyond what is present in the aminophenol powders. Surface-enhanced Raman spectroscopy (SERS) experiments also showed that a 2-aminophenol monolayer adsorbed on SNS is photolytically oxidized to either 3-aminophenoxazone or 2,2′-dihydroxyazobenzene, while neither 3-aminophenol nor 4-aminophenol showed any SERS activity. This work is expected to have a significant impact in a range of environmental, biochemical, and industrial applications where phenol chemistry is important.     

Electroless deposition of gold thin films on silicon for surface-enhanced infrared spectroelectrochemistry

Electroless (or chemical) deposition technique has been used in preparing Au island film electrodes on Si for in situ infrared spectroscopic studies of the electrochemical interface in attenuated total reflection mode. Owing to surface-enhanced infrared absorption (SEIRA) effect, absorption bands of molecules adsorbed on the chemically deposited films were one order of magnitude as large as those observed on smooth Au electrode surfaces. Although the enhancement factor was identical to that observed on vacuum evaporated Au island films, this simple method is superior to vacuum evaporation method with respect to the adhesion of the film, surface contamination, reproducibility, and cost.     

多孔硅薄膜上铜微晶的形成

以氯化铜水溶液作电解液,在发光多孔硅薄膜表面上电沉积铜.SEM观测和计算机图像处理结果表明:电沉积之后,在多孔硅薄膜上形成了一些或实心或中空的等边三角形铜微晶,沉积后的多孔硅薄膜的分形维数从2.608降为2.252,其表面由粗糙变为光滑.与物理方法制作相比,这是一种机械强度和导电性能都更加良好的多孔硅薄膜.