Reversible O-O bond cleavage and formation of a peroxo moiety of a peroxocarbonate ligand mediated by an iron(III) complex

A mononuclear iron(III) complex containing a peroxocarbonate ligand, [Fe(qn)2(O2C(O)O)]- (qn = quinaldinate), underwent the reversible O-O bond cleavage and reformation of the peroxo group via the formation of FeIV=O or FeV=O species, which was confirmed by the resonance Raman and ESI-TOF/MS measurements.     

A lipophilic hexaporphyrin assembly supported on a stannoxane core

Lipophilic hexaporphyrin free-base and copper-metalated assemblies supported on a Sn6O6 core have been synthesized and characterized. The nuclease activity of the copper derivative has been studied.     

Hydroxyl radical formation by O-O bond homolysis in peroxynitrous acid

Peroxynitrite decay in weakly alkaline media occurs by two concurrent sets of pathways which are distinguished by their reaction products. One set leads to net isomerization to NO(3)(-) and the other set to net decomposition to O(2) plus NO(2)(-). At sufficiently high peroxynitrite concentrations, the decay half-time becomes concentration-independent and approaches a limiting value predicted by a mechanism in which reaction is initiated by unimolecular homolysis of the peroxo O-O bond, i.e., the following reaction: ONOOH --> (*)OH + (*)NO(2). This dynamical behavior excludes alternative postulated mechanisms that ascribe decomposition to bond rearrangement within bimolecular adducts. Nitrate and nitrite product distributions measured at very low peroxynitrite concentrations also correspond to predictions of the homolysis model, contrary to a recent report from another laboratory. Additionally, (1) the rate constant for the reaction ONOO(-) --> (*)NO + (*)O(2)(-), which is critical to the kinetic model, has been confirmed, (2) the apparent volume of activation for ONOOH decay (DeltaV() = 9.7 +/- 1.4 cm(3)/mol) has been shown to be independent of the concentration of added nitrite and identical to most other reported values, and (3) complex patterns of inhibition of O(2) formation by radical scavengers, which are impossible to rationalize by alternative proposed reaction schemes, are shown to be quantitatively in accord with the homolysis model. These observations resolve major disputes over experimental data existing in the literature; despite extensive investigation of these reactions, no verifiable experimental evidence has been advanced that contradicts the homolysis model.     

New hexanuclear antiferromagnetic heterospin iron complex

Precise oxidation of Fe^II ₄(μ₃-OH)₂(OOCBu^t)₆(EtOH)₆ afforded the mixed-valent hexanuclear complex [Fe^II ₄Fe^III ₂(μ₄-O)₂(μ₃-OOCBu^t)₄(μ-OOCBu^t)₆(HOOCBu^t)₃(EtOH)]· ·HOOCBu^t. The structure of the latter was established by X-ray diffraction. The magnetic properties of the new complex were studied. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 5, pp. 900–903, May, 2006.     

New reaction model for O-O bond formation and O2 evolution catalyzed by dinuclear manganese complex

A new mechanism of the oxygen evolving reaction catalyzed by [H(2)O(terpy)Mn(μ-O)(2)Mn(terpy)OH(2)](3+) is proposed by using density functional theory. This proton coupled electron transfer (PCET) model shows reasonable barriers. Because in experiments excess oxidants (OCl(-) or HSO(5)(-)) are required to evolve oxygen from water, we considered the Mn(2) complex neutralized by three counterions. Structure optimization made the coordinated OCl(-) withdraw a H(+) from the water ligand and produces the reaction space for H(2)O(2) formation with the deprotonated OH(-) ligand. The reaction barrier for the H(2)O(2) formation from OH(-) and protonated OCl(-) depends significantly on the system charge and is 14.0 kcal/mol when the system is neutralized. The H(2)O(2) decomposes to O(2) during two PCET processes to the Mn(2) complex, both with barriers lower than 12.0 kcal/mol. In both PCET processes the spin moment of transferred electrons prefers to be parallel to that of Mn 3d electrons because of the exchange interaction. This model thus explains how the triplet O(2) molecule is produced.     

Theoretical studies of O-O bond formation in photosystem II

The most critical part of dioxygen evolution in photosystem II is the O-O bond formation step. In order to reach an efficient mechanism, nature uses a unique oxygen-evolving complex (OEC) having four manganese and one calcium center. Even though the structure of the OEC has become much more clear during recent years, it has still been difficult to find a transition state (TS) for O-O bond formation with a sufficiently low barrier. However, about a year ago, a quite surprising type of TS was found. With the latest X-ray ligand assignment, the local barrier for this TS is only 5.1 kcal/mol. It can be described as an attack by an oxygen radical, held by a dangling manganese, on a bridging oxo ligand in the Mn3Ca cube. In the present short Article, energy diagrams describing the entire process of dioxygen formation will be presented. An important conclusion drawn from these diagrams is that the major features of dioxygen formation remain the same irrespective of which one of the experimentally suggested structures the diagram is built on. Compared to earlier presentations of the same type, a slightly different approach has been used for setting up the diagrams. Results from a recent experimental study of the pressure dependence of oxygen release have been used to define the final energy levels. The loss of energy in the electron transfer from Tyrz to P680 has also been incorporated into the diagrams. A good agreement with experimental observations is demonstrated.     

A hybrid density functional study of O-O bond cleavage and phenyl ring hydroxylation for a biomimetic non-heme iron complex

Density functional calculations using the B3LYP functional have been used to study the reaction mechanism of [Fe(Tp(Ph2))BF] (Tp(Ph2) = hydrotris(3,5-diphenylpyrazol-1-yl)borate; BF = benzoylformate) with dioxygen. This mononuclear non-heme iron(II) complex was recently synthesized, and it proved to be the first biomimetic complex reproducing the dioxygenase activity of alpha-ketoglutarate-dependent enzymes. Moreover, the enthalpy and entropy of activation for this biologically interesting process were derived from kinetic experiments offering a unique possibility for direct comparison of theoretical and experimental data. The results reported here support a mechanism in which oxidative decarboxylation of the keto acid is the rate-limiting step. This oxygen activation process proceeds on the septet potential energy surface through a transition state for a concerted O-O and C-C bond cleavage. In the next step, a high-valent iron-oxo species performs electrophilic attack on the phenyl ring of the Tp(Ph2) ligand leading to an iron(III)-radical sigma-complex. Subsequent proton-coupled electron-transfer yields an iron(II)-phenol intermediate, which can bind dioxygen and reduce it to a superoxide radical. Finally, the protonated superoxide radical leaves the first coordination sphere of the iron(III)-phenolate complex and dismutates to dioxygen and hydrogen peroxide. The calculated activation barrier (enthalpy and entropy) and the overall reaction energy profile agree well with experimental data. A comparison to the enzymatic process, which is suggested to occur on the quintet surface, has been made.     

Self-assembly of fullerene-rich nanostructures with a stannoxane core

Fullerene derivatives bearing a carboxylic acid function undergo self-assembly with n-butylstannonic acid (nBuSn(O)OH) to produce fullerene-rich nanostructures with a stannoxane core in almost quantitative yields.     

Electronic design criteria for O-O bond formation via metal-oxo complexes

Metal-oxos are critical intermediates for the management of oxygen and its activation. The reactivity of the metal-oxo is central to the formation of O-O bonds, which is the essential step for oxygen generation. Two basic strategies for the formation of O-O bonds at metal-oxo active sites are presented. The acid-base (AB) strategy involves the attack of a nucleophilic oxygen species (e.g., hydroxide) on an electrophilic metal-oxo. Here, active-site designs must incorporate the assembly of a hydroxide (or water) proximate to a high-valent metal-oxo of even d electron count. For the radical coupling (RC) strategy, two high-valent metal-oxos of an odd d electron count are needed to drive O-O coupling. This Forum Article focuses on the different electronic structures of terminal metal-oxos that support AB and RC strategies and the design of ligand scaffolds that engender these electronic structures.     

A computational study of O-O bond formation catalyzed by mono- and bis-MnIV-corrole complexes

A detailed computational study of O-O bond formation, catalyzed by monomeric and dimeric Mn-corrole complexes, is reported. The model explicitly takes into account the solvent, with respect to the first and second coordination spheres, while the bulk solvent is described by the polarizable continuum model. Two reaction mechanisms are proposed and computationally characterized: the concerted and the two-step mechanisms. The concerted mechanism is based on a OH--MnIVO interaction via the outer-sphere pathway involving the bridging solvent molecules in the first coordinating sphere. The two-step mechanism is proposed to operate via the coordination of a hydroxide to the MnIV ion, forming a MnO(OH)--corrole complex with a strongly nonplanar corrole ligand. Comparison of the proposed mechanisms with available experimental data is performed.     

O-O bond formation in the S(4) state of the oxygen-evolving complex in photosystem II

Based on recent X-ray structures of the oxygen-evolving complex in photosystem II, quantum chemical geometry optimizations of several thousand structures have been performed in order to elucidate the mechanism for dioxygen formation. Many of the results of these calculations have been presented previously. The energetically most stable structure of the S(4) state has been used in the present study to investigate essentially all the possible ways the O--O bond can be formed in this structure. A key feature, emphasized previously, of the S(4) state is that an oxygen radical ligand is present rather than an Mn(V) state. Previous studies have indicated that this oxygen radical can form an O--O bond by an attack from a water molecule in the second coordination shell. The present systematic investigation has led to a new type of mechanism that is significantly favored over the previous one. A calculated transition-state barrier of 12.5 kcal mol(-1) was found for this mechanism, whereas the best previous results gave 18-20 kcal mol(-1). A requirement on the spin alignment for a low barrier is formulated.     

A density functional study of O-O bond cleavage for a biomimetic non-heme iron complex demonstrating an Fe(v)-intermediate

Density functional theory using the B3LYP hybrid functional has been employed to investigate the reactivity of Fe(TPA) complexes (TPA = tris(2-pyridylmethyl)amine), which are known to catalyze stereospecific hydrocarbon oxidation when H(2)O(2) is used as oxidant. The reaction pathway leading to O-O bond heterolysis in the active catalytic species Fe(III)(TPA)-OOH has been explored, and it is shown that a high-valent iron-oxo intermediate is formed, where an Fe(V) oxidation state is attained, in agreement with previous suggestions based on experiments. In contrast to the analogous intermediate [(Por.)Fe(IV)=O](+1) in P450, the TPA ligand is not oxidized, and the electrons are extracted almost exclusively from the mononuclear iron center. The corresponding homolytic O-O bond cleavage, yielding the two oxidants Fe(IV)=O and the OH. radical, has also been considered, and it is shown that this pathway is inaccessible in the hydrocarbon oxidation reaction with Fe(TPA) and hydrogen peroxide. Investigations have also been performed for the O-O cleavage in the Fe(III)(TPA)-alkylperoxide species. In this case, the barrier for O-O homolysis is found to be slightly lower, leading to loss of stereospecificity and supporting the experimental conclusion that this is the preferred pathway for alkylperoxide oxidants. The difference between hydroperoxide and alkylperoxide as oxidant derives from the higher O-O bond strength for hydrogen peroxide (by 8.0 kcal/mol).     

Imine-assisted C-F bond activation by electron-rich iron complexes supported by trimethylphosphine

C-F bond activation of ortho-fluorinated benzalimines 2,6-F(2)C(6)R1R2R3-CH=N-R (1-3) using the electron-rich complex Fe(PMe(3))(4) is reported. With the assistance of the imine group as the anchoring group, bis-chelated iron(II) complexes (C(6)FR1R2R3-CH=N-R)(2)Fe(PMe(3))(2) (4-6) were formed. The reaction of 2,6-difluorobenzylidenenaphthalen-1-amine 2,6-F(2)C(6)H(3)-CH=N-C(10)H(7) (9) with Fe(PMe(3))(4) affords [CNC]-pincer iron(II) complex (C(6)H(3)F-CH=N-C(10)H(6))Fe(PMe(3))(3) (10) through both C-F and C-H bond activation and π-(C=N) coordinate iron(0) complex (C(6)H(3)F-CH=N-C(10)H(7))(2)Fe(PMe(3))(2) (11) with C,C-coupling, while a similar reaction with perfluorobenzylidenenaphthalen-1-amine C(6)F(5)-CH=N-C(10)H(7) (14) gave rise to only [CNC]-pincer iron(II) complex (C(6)F(4)-CH=N-C(10)H(6))Fe(PMe(3))(3) (15). The proposed formation mechanisms of these complexes are discussed. The structures of complexes 5, 6, 10 and 11 were confirmed by X-ray single crystal diffraction.     

Water oxidation by a ruthenium complex with noninnocent quinone ligands: possible formation of an O-O bond at a low oxidation state of the metal

Tanaka and co-workers reported a novel dinuclear Ru complex, [Ru2(OH)2(3,6-Bu2Q)2(btpyan)](SbF6)2 (3,6-Bu2Q = 3,6-di tert-butyl-1,2-benzoquinone, btpyan = 1,8-bis(2,2':6',2'-terpyrid-4'-yl)anthracene), that contains redox active quinone ligands and has an excellent electrocatalytic activity for water oxidation when immobilized on an indium-tin-oxide electrode (Inorg. Chem., 2001, 40, 329-337). The novel features of the dinuclear and related mononuclear Ru species with quinone ligands, and comparison of their properties to those of the Ru analogues with the bpy ligand (bpy = 2,2'-bipyridine) replacing quinone, are summarized here together with new theoretical and experimental results that show striking features for both the dinuclear and mononuclear species. The identity and oxidation state of key mononuclear species, including the previously reported oxyl radical, have been reassigned. Our gas-phase theoretical calculations indicate that the Tanaka Ru-dinuclear catalyst seems to maintain predominantly Ru(II) centers while the quinone ligands and water moiety are involved in redox reactions throughout the entire catalytic cycle for water oxidation. Our theoretical study identifies [Ru2(O2(-))(Q(-1.5))2(btpyan)](0) as a key intermediate and the most reduced catalyst species that is formed by removal of all four protons before four-electron oxidation takes place. While our study toward understanding the complicated electronic and geometric structures of possible intermediates in the catalytic cycle is still in progress, the current status and new directions for kinetic and mechanistic investigations, and key issues and challenges in water oxidation with the Tanaka catalyst (and its analogues with Cl(-) or NO(2-)substituted quinones and a species with a xanthene bridge instead an antheracene) are discussed.     

O-O bond cleavage in dinuclear peroxo complexes of iron porphyrins: a quantum chemical study

To gain insight into the mechanisms of O2 activation and cleavage in metalloenzymes, biomimetic metal complexes have been constructed and experimentally characterized. One such model complex is the dinuclear peroxo complex of iron porphyrins observed at low temperature in a non-coordinating solvent. The present theoretical study examines the O-O bond cleavage in these complexes, experimentally observed to occur either at increased temperature or when a strongly coordinating base is added. Using hybrid density functional theory, it is shown that the O-O bond cleavage always occurs in a state where two low-spin irons (S = +/-1/2) are antiferromagnetically coupled to a diamagnetic state. This state is the ground state when the strong base is present and forms an axial ligand to the free iron positions. In contrast, without the axial ligands, the ground state of the dinuclear peroxo complex has two high-spin irons (S = +/-5/2) coupled antiferromagnetically. Thus, the activation barrier for O-O bond cleavage is higher without the base because it includes also the promotion energy from the ground state to the reacting state. It is further found that this excitation energy, going from 10 unpaired electrons in the high-spin case to 2 in the low-spin case, is unusually difficult to determine accurately from density functional theory because it is extremely sensitive to the amount of exact exchange included in the functional.     

Nitric oxide coupling mediated by iron porphyrins: the N-N bond formation step is facilitated by electrons and a proton

The coupling of two NO molecules catalyzed by iron porphyrins is of biological importance. We use density functional theory calculations to examine the factors that control the fundamental N-N bond formation step mediated by a single iron porphyrin. The presence of an axial Im ligand, extra electrons, and most importantly a proton, enhance the N-N bond formation step in our model.     

A mild C-O bond formation catalyzed by a rhenium-oxo complex

A mild method for the regioselective synthesis of propargyl ethers by the coupling of propargyl alcohols with a range of other alcohols is described. The method employs an air- and moisture-tolerant rhenium-oxo complex ((dppm)ReOCl3) as a catalyst for the formation of sp3-carbon-oxygen bonds without the need for prior activation of the propargyl alcohol or deprotonation of the alcohol nucleophile. A broad range of functional groups is tolerated, including aryl halides, olefins, esters, and acid-labile functional groups such as acetals. Furthermore, displacement of the alcohol occurs preferentially even in the presence of other electrophiles such as primary alkyl halides and conjugated esters.     

Basic ancillary ligands promote O-O bond formation in iridium-catalyzed water oxidation: a DFT study

The cationic iridium complex [Ir(OH(2))(2)(phpy)(2)](+) (phpy = o-phenylpyridine) is among the most efficient mononuclear catalysts for water oxidation. The postulated active species is the oxo complex [Ir(O)(X)(phpy)(2)](n), with X = OH(2) (n = +1), OH(-) (n = 0) or O(2-) (n = -1), depending on the pH. The reactivity of these species has been studied computationally at the DFT(B3LYP) level. The three [Ir(O)(X)(phpy)(2)](n) complexes have an electrophilic Ir(v)-oxo moiety, which yields an O-O bond by undergoing a nucleophilic attack of water in the critical step of the mechanism. In this step, water transfers one proton to either the Ir(V)-oxo moiety or the ancillary X ligand. Five different reaction pathways associated with this acid/base mechanism have been characterized. The calculations show that the proton is preferably accepted by the X ligand, which plays a key role in the reaction. The higher the basicity of X, the lower the energy barrier associated with O-O bond formation. The anionic species, [Ir(O)(2)(phpy)(2)](-), which has the less electrophilic Ir(V)-oxo moiety but the most basic X ligand, promotes O-O bond formation through the lowest energy barrier, 14.5 kcal mol(-1). The other two active species, [Ir(O)(OH)(phpy)(2)] and [Ir(O)(OH(2))(phpy)(2)](+), which have more electrophilic Ir(V)-oxo moieties but less basic X ligands, involve higher energy barriers, 20.2 kcal mol(-1) and 25.9 kcal mol(-1), respectively. These results are in good agreement with experiments showing important pH effects in similar catalytic systems. The theoretical insight given by the present study can be useful in the design of more efficient water oxidation catalysts. The catalytic activity may increase by using ligand scaffolds bearing internal bases.