完全降解聚乳酸共混复合材料的研究进展

聚乳酸(PLA)是可完全生物降解的材料,广泛应用于包装、纺织、生物医用等领域。但其具有性脆,价格较高,疏水性大等缺点,限制了应用发展。近年来对聚乳酸共混改性已成为研究热点。根据共混组分的生物降解性,聚乳酸共混体系分为完全生物降解体系和部分生物降解体系。文中综述了近年来完全生物降解聚乳酸共混体系的研究,主要阐述了PLA/淀粉、PLA/天然纤维复合材料,并简要介绍了PLA/甲壳素、PLA/蛋白等PLA/天然高分子复合材料,以及PLA/PCL、PLA/PPC、PLA/PEO等PLA/合成高分子复合材料。     

高分子共混物中氢键的作用Ⅱ.氢键对高分子共混物性能的影响以及引入方法

高分子共混物中氢键的存在能促进共混组分具有更好的可混和性.因此,研究高分子共混物中的氢键对高分子的共混改性具有重要的理论和实用价值.本文是<高分子共混物中氢键的Ⅰ.氢键的特征描述以及影响因素>的下篇,将继续介绍高分子共混物中氢键的作用,主要包括氢键对高分子共混物性能的影响以及主要的引入氢键的方法.特别地,本文通过将高分子共混物分为合成高分子与合成高分子共混物,合成高分子与天然高分子共混物以及合成高分子与其它物质共混物,总结了氢键存在对共混物性能的影响.     

聚碳酸1,2-丙二酯/聚琥珀酸丁二酯/邻苯二甲酸二烯丙酯共混体系的研究

采用熔融共混的方法制备了聚碳酸1,2-丙二酯(PPC)/聚琥珀酸丁二酯(PBS)共混物和PPC/PBS/DAOP(邻苯二甲酸二烯丙酯)增塑共混物,对共混物的相容性、热性能、结晶性和物理机械性能进行了初步研究.研究结果表明PPC/PBS共混物为不相容体系,PPC对PBS的结晶度影响很小;PBS的加入提高了共混物的起始热分解温度(Td-5%),当共混物中PBS含量从10%增加到90%时,共混物的Td-5%可分别增加15℃到59℃.DAOP对PPC/PBS共混物有增塑作用,当PPC/PBS/DAOP的比例从30/70/0变化到30/70/30时,共混物玻璃化转变温度(Tg)下降了36.9℃.与PPC/PBS共混物相比,组成优化的DAOP增塑共混物PPC/PBS/DAOP(PPC/PBS/DAOP=30/70/5)的断裂伸长率和断裂能最大可提高31倍和34倍,分别达到655.1%和3.4 J/mm2,因此引入DAOP尽管使共混材料的热稳定性有所下降,但拓宽了PPC/PBS共混材料的使用温度窗口.     

STVPh/PPC共混体系的分子链运动和相容性研究

聚合物共混是制备新材料的有效方法,共混物的相容性是影响材料性能的决定性因素.研究表明,共混物中引入氢键能增加组分聚合物间的相容性.聚碳酸异丙烯[Poly(propylene carbonate),PPC]是一种新材料,它合成经济,且能生物降解,但PPC的低玻璃化转变温度和非晶性使其实际应用受到很大限制.若将PPC与其它聚合物共混制备成高分子共混物,能有效获得新性能.     

高分子共混物中氢键的作用Ⅰ.氢键的特征描述以及影响因素

高分子共混物中氢键的存在能促进共混组分具有更好的可混和性.因此,研究高分子共混物中的氢键对高分子的共混改性具有重要的理论和实用价值.本文参考近年来的文献资料,报道了高分子共混物中氢键的特性描述以及影响氢键的各种因素.本文的下篇<高分子共混物中氢键的作用Ⅱ.氢键对高分子共混物性能的影响以及引入方法将继续介绍高分子共混物中氢键的作用,其总结了氢键的存在对高分子共混物性能的影响和引入氢键的主要方法.     

微生物合成的β-羟基丁酸酯与β-羟基己酸酯共聚物/聚乳酸共混材料(PHBHHx/PLA)的力学性能与生物降解性研究

通过熔融共混法制备了聚乳酸/微生物产β-羟基丁酸酯与β-羟基己酸共聚物的共混物(PLA/PHBHHx)。采用拉伸力学试验研究了共混物的力学性能。通过土壤悬浊培养降解法和扫描电子显微镜(SEM)分析对共混材料的生物降解性能进行了研究。实验结果表明,随着PHBHHx含量的增加,共混物的拉伸强度和杨氏模量降低,而生物降解速率却显著提高。但是,在175h之前,重量组成比为20/80的共混物降解速率比纯PHBHHx还要快。综合分析表明,共混材料PLA/PHBHHx的重量比为20/80时,具有优良的力学性能和生物降解性。     

脂肪族聚碳酸酯(PPC)与聚乳酸(PLA)共混型生物降解材料的热学性能、力学性能和生物降解性研究

通过溶液浇铸法制备了脂肪族聚碳酸酯与聚乳酸的共混物(PPC/PLA).采用示差热分析(DSC)和热重分析(TG)研究了材料的热性能.采用拉伸力学试验研究了共混物的力学性能.通过土壤悬浊拟环境培养降解实验法和扫描电子显微镜分析(SEM)对共混材料的生物降解性能进行了研究.实验结果表明,随着PPC含量的增加,共混物的拉伸强度和杨氏模量降低,而生物降解速率却显著提高.但是,在一定的降解时间内,某些比例共混物的降解速率比100%PPC还要快.综合分析表明,PPC/PLA是力学性能和降解性能可以互补的共混体系.     

低含量聚乳酸对微孔发泡聚丁二酸丁二醇酯泡孔结构的改善

通过挤出制备了可生物降解聚丁二酸丁二醇酯(PBS)和3种聚乳酸(PLA)含量(7 wt%、15 wt%和20 wt%)的PBS/PLA共混物样品,采用超临界二氧化碳作为物理发泡剂对样品进行间歇发泡,研究发泡样品的泡孔结构,并分析其形成机理.在120oC发泡温度(Tf)下,借助PLA对PBS熔体黏弹性尤其是熔体强度的改善,获得了分布较均匀、形状较规则、直径较小(平均值约10μm)的微孔;共混物发泡样品的直径分布明显变窄,且符合高斯分布,这归因于细小的PLA相较均匀地分布于PBS基体中.进一步地,研究Tf对PBS和PLA含量为15 wt%的PBS/PLA共混物发泡样品泡孔结构的影响.结果表明,加入15 wt%的PLA使PBS的Tf下限从115oC降低至110oC,并显著改善了较高Tf(120和125oC)下制备的发泡样品内泡孔结构的均匀性.     

聚(β-羟基丁酸酯)和β-羟基丁酸酯-β-羟基戊酸酯共聚物与可生物降解高分子共混改性研究进展

总结了近年来聚(β-羟基丁酸酯)、β-羟基丁酸酶—β-羟基戊酸酯共聚物与可生物降解高分子共混物的相容性、结晶性、热性能、加工性能、力学性能和生物降解性能。通过共混。聚(β-羟基丁酸酯)与—β-羟基丁酸酶卢羟基戊酸酯共聚物的性能得到显著改善。     

微生物合成的β-羟基丁酸酯与β-羟基已酸酯共聚物/聚乳酸共混材料(PHBHHx/PLA)的力学性能与生物降解性研究

通过熔融共混法制备了聚乳酸/微生物产β-羟基丁酸酯与β-羟基己酸共聚物的共混物(PLA/PHBHHx).采用拉伸力学试验研究了共混物的力学性能.通过土壤悬浊培养降解法和扫描电子显微镜(SEM)分析对共混材料的生物降解性能进行了研究.实验结果表明,随着PHBHHx含量的增加,共混物的拉伸强度和杨氏模量降低,而生物降解速率却显著提高.但是,在175h之前,重量组成比为20/80的共混物降解速率比纯PHBHHx还要快.综合分析表明,共混材料PLA/PHBHHx的重量比为20/80时,具有优良的力学性能和生物降解性.     

利用手持技术改进测定乙醇分子结构实验

利用压强传感器代替排水集气法,改进测定乙醇分子结构实验的仪器装置,并探索最佳反应条件。另外,设计两个空白实验,结合压强变化曲线对实验误差进行相关讨论。     

光谱仪测试范围的扩展

由于石化行业的生产需要，其材质的使用具有多样性和广泛性，经常会出现顾客委托的测试样品的一个或几个元素跨越光谱仪现有测试程序测量范围的情况。本法通过对光谱仪测试原理的认识，根据光谱仪的测试能力及标样的采集，实现了一个或几个元素测量范围的扩展，并对其测量的影响因素进行了研究。     

Influence of viscosity of medium on processes of oxygen quenching of excited states of mesoporphyrin

The oxygen quenching rate constants for singlet and triplet excited states of the dimethyl ester of mesoporphyrin IX increase with decreasing viscosity of the medium and reach a maximum at a viscosity of approximately 0.4 mPa·sec, after which the rate constants begin to decrease. The drop in rate constant with increasing fluidity of the medium may be related to a nonequilibrium character of the elementary act in the interaction of the reactants in the solvent cage. In viscous media such as isopropyl alcohol, isobutyl alcohol, and isoamyl alcohol, the reaction radius is greater than the sum of the radii of the reacting particles. The long-range character of these processes is due to the relatively weak dependence of the quenching probability on distance.Translated from Teoreticheskaya i Éksperimental'naya Khimiya, Vol. 25, No. 2, pp. 161–167, March–April, 1989.     

Dichroism of absorption and polarization of phosphorescence of molecules of the closed form of nitrobenzospirothiopyran

The spectral-polarization characteristics of absorption and phosphorescence of molecules of the initial form of nitro-substituted indolinospirobenzothiopyran were studied in oriented polyethylene films and in solutions with different polarity. An oscillator model of the electron transitions responsible for the formation of absorption and luminescence spectra was suggested. It was established that the principal differences in the spectral and photophysical properties of the compound studied and its oxygen-containing analog are associated with the fact that the electronegativity of the S atom is lower than that of the O atom. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 6, pp. 1143–1146, June, 1997.     

Neutral diterpenoids of oleoresins of five species of conifers of Transcarpathia

The compositions of the neutral diterpenoids of the oleoresins of five species of conifers growing in the Transcarpathia have been studied. It has been found that the oleoresins ofAbies alba M.,Larix decidua M., andPicea excelsa L. contain more than 50% of neutral diterpenoids. The group and qualitative compositions of the oxygen-containing diterpenoids have been determined. In the oleoresins ofAbies alba,Picea excelsa, andPicea abies tertiary alcohols — cis-abienol and isocembrol — predominate, while inLarix decidua the main component is the hydroxy ester larixyl acetate. Primary alcohols related to the resin acids have been found in all the oleoresins investigated. Features of the distribution of diterpenoids according to the species of conifers have been revealed. The results obtained are necessary for the chemotaxonomy of conifers of the family Pinceae.Novosibirsk Institute of Organic Chemistry, Siberian Branch, Academy of Sciences of the USSR. Translated from Khimiya Prirodynkh Soedinenii, No. 6, pp. 812–816, November–December, 1988.     

Determination of heats of detonation and influence of components of composite explosives on heats of detonation of high explosives

The heats of detonation of 20 simple high explosives and explosive mixtures were determined by means of an adiabatic detonation calorimeter designed by the authors. The results indicated that the performance of the instrument was reliable and the experimental data were very accurate. For explosive mixtures, there was a linear accumulative relationship between the heats of detonation of the explosive mixture and its components. Accordingly, the heats of detonation of explosive mixtures could be calculated directly from the heats of detonation of simple explosives and the characteristic heats of other components. The experiments showed that the gold or brass shell of the cylindrical charge could be substituted by a thick-walled porcelain shell, which had the advantage of cheapness.

     

物质分配系数的测定实验改进

实验教学目的是从解决实际问题出发,以实验技术训练和实验设计思想培养为目标。介绍了将单一的物质分配系数测定实验改进为综合实验,提高了实验效果及实验资源利用率。     

Calculation of enthalpies of hydrogenation of hydrocarbons

Sets of hydrogen molecule equivalents have been developed which permit the calculation of hydrogenation of different types of carbon-carbon bonds from ab initio total energies (3-21G and 6-31G* basis sets, and, to a more limited extent, for MP2/6-31G* data) of reactants and products. The calculated enthalpies of hydrogenation are in good agreement with experiment for unstrained molecules, with average errors on the order of 2 kcal/mol. The 6-31G* equivalents allow the enthalpies for strained molecules to be calculated accurately, but the 3-21G equivalents do not. The equivalents for both basis sets have been tested by calculating the enthalpies of hydrogenation of carbon-carbon bonds in nitrogen- and oxygen-containing organic molecules, free radicals, and classical carbocations. The results are in good agreement with experiment in most cases.     

非那雄胺合成工艺改进

非那雄胺能抑制5α-还原酶的活性,明显降低二氢睾酮水平,是一种治疗良性前列腺增生的有效药品。该合成工艺以甾烯酮酸为原料,将其与氯化亚砜反应,无须分离即与叔丁胺反应得17β-酰胺化合物,再氧化开环,环合,氢化,脱氢合成了非那雄胺。经元素分析、IR、1HNMR、13CNMR、MS分析表征了其结构。该法无须使用昂贵的2,2-二吡啶二硫化物和剧毒药品苯亚硒酸酐,且以乙酸铵代替氨气,降低了对设备的要求和腐蚀,更适用于工业生产。