Morphology-controlled synthesis of poly(oxyethylene)silicone or alkylsilicone surfactants with explicit, atomically defined, branched, hydrophobic tails

Silicone surfactants are widely used in commerce because of the unusual surface activity when compared with fluorocarbon or hydrocarbon surfactants. However, most silicone surfactants are comprised of ill-defined mixtures, which preclude the development of an understanding of structure-surface activity relationships. Herein, we report a synthetic strategy that permits exquisite control over silicone structure by using the B(C(6)F(5))(3)-catalyzed condensation of hydro- and alkoxysilanes. Six different, precise hydrophobes were then mated to hydrophilic poly(oxyethylene)s of three different molecular weights by a metal-free click cyclization to generate a library of explicit silicone surfactants. These compounds were calculated to have a relatively linear value range of the hydrophilic-lipophilic balance, ranging from about 8 to about 15. The solubility of some of the compounds was too low to measure a critical micelle concentration (CMC). The others exhibited a broad range of surface tension values at the CMC that depend both on the length of the hydrophilic tail and, more importantly, the nature of the hydrophobic head group. Subtle distinctions in surfactant-related properties, which can be attributed to the three-dimensional structures, can be seen for compounds with comparable numbers of hydrocarbons and silicon groups.     

Dispersion copolymerization of poly(oxyethylene) macromonomers and styrene

The kinetics of dispersion copolymerization of methacryloyl-terminated poly(oxyethylene) (PEO-MA) and p-vinylbenzyl-terminated (PEO-St) polyoxyethylene macromonomers and styrene (St), initiated by a water- and/or oil-soluble initiator, was investigated using conventional gravimetric and NMR methods at 60°C. The batch copolymerizations in the water/ethanol continuous phase were conducted to high conversion. The rate of polymerization was described by the curve with a maximum at very low conversion. The initial rate of polymerization and the number-average molecular weight were found to decrease with increasing [PEO-MA], and the decrease was more pronounced in the range of a high macromonomer concentration. The rate per particle (at ca. 20% conversion) was found to be proportional to the −1.55th, the particle size to the −0.92nd, and the number of particles (at final conversion) to the 3.2nd power of [PEO-MA], respectively. At the beginning of polymerization the continuous phase is the main reaction locus. As the polymerization advances, the reaction locus is shifted from the continuous phase to the polymer particles. The transform of the reaction loci from the continuous phase to the polymer particles increases the rate of polymerization and the polymer molecular weights. The increase of the weight ratio PEO-MA/St favors the formation of monodisperse polymer particles, the colloidal stability of dispersion, and the formation of a larger number of polymer particles. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 3131–3139, 1997     

Solution properties of an aqueous poly(methacryl oxyethyl trimethylammonium chloride) and its poly(oxyethylene) grafted analog

Cationic poly(methacryl oxyethyl trimethylammonium chloride), PMOTAC, and its poly(oxyethylene), POE, grafted analog have been synthesised. The molar mass of the POE grafts was M_w = 200 g/mol, and the grafting degrees of the synthesised copolymers were 2, 5, and 15 mol %. The effect of the POE grafts on the solution properties and the conformation of the polycation has been investigated in aqueous NaNO₃ by means of dynamic and static light scattering, viscometry, and Raman spectroscopy. It was found that the polyelectrolyte properties are more pronounced for the homopolymer than for the POE‐grafted copolymers. The increase of the POE‐grafting degree dramatically decreases the hydrodynamic radius of individual macromolecules and causes intermolecular association. It also suppresses the conformational response of the copolymers upon changing the ionic strength with respect to that of the homopolymer. DFT calculations have been used to estimate a possible mechanism of interaction between the POE grafts and the MOTAC repeating units. It has been revealed that the POE grafts are capable of forming intramolecular hydrogen bonds with the MOTAC groups. The latter was confirmed experimentally; addition of free POE chains to a solution of PMOTAC results in formation of intermolecular PMOTAC/POE complexes. Increasing the POE concentration decreases the solution viscosity. At the same time, the bimodal distributions of the hydrodynamic radius, which are typical for polyelectrolytes in salt‐free solutions, become monomodal representing the PMOTAC/POE complexes. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 547–557, 2008     

Star-graft copolymers. Synthesis of amphiphilic graft copolymers with star-branched poly(oxyethylene) side chains

The synthesis of novel amphiphilic star-graft (SG) copolymers containing hydrophilic poly(oxyethylene) (PEO) side chains attached to a hydrophobic backbone by multifunctional entity is reported. In a first step poly(phthalimidoacrylate-co-styrene) was converted into polymers containing different number of multifunctional branching cites distributed along the main chain by partial aminolysis of the phthalimidoacrylate units with tris(hydroxymethyl)aminomethane. In the second step, these reactive copolymers yielded SG copolymers with different number of star-shaped PEO side groups by reaction with isocyanato terminated methoxy–PEO. The copolymers were characterized by size-exclusion chromatography, IR-, and NMR-spectroscopy. Their thermal properties were examined by thermal gravimetric analysis and differential scanning calorimetry. The studies indicate that the grafting degree and hydrogen bonding determine to a great extent the behavior of the SG copolymers in solid state and in solution. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 673–679, 1997     

Synthesis of a novel poly(oxyethylene)-bridged β-cyclodextrin dimer

A novel supramolecular building block based on cyclodextrin and poly(oxyethylene) is reported, in which the poly(oxyethylene) moiety was selected to be the linker for cyclodextrin in order to enhance the biocompatibility. We report for the first time the synthesis of a bridged β-cyclodextrin dimer based on a condensation reaction by using a simple and efficient procedure, which can be employed for applications in supramolecular chemistry as a nanoscaled building block. It is noteworthy that the dimerization of β-cyclodextrin can increase the binding affinity compared to the β-cyclodextrin derivatives. The chemical structure is biocompatible and the dimer can therefore be considered for drug delivery applications.     

Synthesis of poly(oxyethylene phosphonate)s bearing oxirane groups in the side chain

The interaction between poly(oxyethylene phosphonate)s and 1,2-epoxy-7-octene has been investigated. It has been established that in the presence of benzoyl peroxide there proceeds a selective addition of the P( )H group to the C()C double bond. Poly(oxyethylene phosphonate)s bearing oxirane groups in the side chain have been synthesized. The new polymers can be used as polymer carriers of drugs. © 1997 John Wiley & Sons, Inc.     

Reversible melting of high molar mass poly(oxyethylene)

The heat capacity, C_p, of poly(oxyethylene), POE, with a molar mass of 900,000 Da, was analyzed by temperature-modulated differential scanning calorimetry, TMDSC. The high molar mass POE crystals are in a folded-chain macroconformation and show some locally reversible melting, starting already at about 250 K. At 335 K the thermodynamic heat capacity reaches the level of the melt. The end of melting of a high-crystallinity sample was analyzed quasi-isothermally with varying modulation amplitudes from 0.2 to 3.0 K to study the reversible crystallinity. A new internal calibration method was developed which allows to quantitatively assess small fractions of reversibly melting crystals in the presence of the reversible heat capacity and large amounts of irreversible melting. The specific reversibility decreases to small values in the vicinity of the end of melting, but does not seem to go to zero. The reversible melting is close to symmetric with a small fraction crystallizing slower than melting, i.e., under the chosen condition some of the melting and crystallization remains reversing. The collected data behave as one expects for a crystallization governed by molecular nucleation and not as one would expect from the formation of an intermediate mesophase on crystallization. The method developed allows a study of the active surface of melting and crystallization of flexible macromolecules.     

NMR study of the structure of poly(N-benzoyl-8-octanelactam)

The structure of a polymer prepared by the polymerization of N-benzoyl-8-octanelactam initiated with benzoic acid was studied by ¹H and ¹³C NMR, using S-INEPT, COSY, COLOC, and ROSEY methods, with the aid of model oligomers. Beside the expected N-benzoylated segments, the polymer also contained deacylated segments and about 50% of branching units. The polymer can be characterized as a statistical, highly branched copolymer of N-benzoyl-8-octanelactam and 8-octanelactam. © 1993 John Wiley & Sons, Inc.     

Amphiphilic graft copolymers with poly(oxyethylene) side chains: Synthesis via activated ester intermediates—properties

Amphiphilic graft copolymers were synthesized via activated ester substitution of derivatives of fumaric acid with amino-functionalized methoxypoly (oxyethylene)s (MPEO-NH₂) of different molecular weights. The monomeric activated esters, isopropyl pentachlorophenyl fumarate (PCPFA) and isopropyl succinimido fumarate (SIFA), were copolymerized with styrene (St) or N-vinyl pyrrolidone (VP) at equimolar ratio. The polymeric-activated esters proved to be good precursors for grafting of definite amounts of MPEO-NH₂. The aminolysis of the succinimide esters and VP-containing copolymers proceeded with gel formation due to extensive hydrogen bonding. The hydrodynamic behavior, the emulsifying ability, the thermal properties, and crystallinity of the graft copolymers were studied as a function of their molecular characteristics. The length of the PEO grafts and the degree of grafting are the factors which affect the melting parameters and the crystallinity of the side chains. © 1994 John Wiley & Sons, Inc.     

Sequence analysis of poly (ether sulfone) copolymers by 13C NMR

Random and block copolymers of poly (ether sulfone) (PES) and poly (ether ether sulfone) (PEES) were synthesized by the nucleophilic polycondensation of 4,4′‐dichlorodiphenyl sulfone (DCDPS) with 4,4′‐dihydroxydiphenyl sulfone (DHDPS) and hydroquinone (HQ). Chemical structures of these copolymers were characterized by ¹³C NMR. The monomer molar fraction, sequential distribution, and degree of randomness of the copolymers were determined through analyses of the resonances of quaternary carbons in the DCDPS unit. Experimental results show that the molar fractions of the comonomer determined by ¹³C NMR analyses are close to the charged values in the synthetic step. Moreover, these copolymers, which were prepared by different polymerization methods, revealed different number‐average sequential length and degree of randomness. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1624–1630, 2005     

Synthesis and properties of poly(oxyethylene)s containing thioether,sulfoxide, or sulfone groups

Poly[oxy(ethylthiomethyl)ethylene] (ETE) was prepared from poly[oxy (chloromethyl)ethylene] (CE) by reaction with sodium ethanethiolate. Sulfoxide and sulfone analogues were synthesized by oxidation of the poly[oxy(ethylthiomethyl)ethylene]. By changing the chloromethyl/sodium ethanethiolate ratio, poly[oxy (chloromethyl)ethylene-co-oxy(ethylthiomethyl)ethylene] (CE-ETEs) were easily made. Poly[oxy(ethylsulfinylmethyl)ethylene] (ESXE), poly[oxy(chloromethyl)ethylene-co-oxy(ethylsulfinylmethyl)ethylene] (CE-ESXEs), poly[oxy(ethylsulfonylmethyl)ethylene] (ESE), and poly[oxy(chloromethyl)ethylene-co-oxy(ethylsulfonylmethyl)ethylene] (CE-ESEs) were obtained by oxidation of ETE or CE-ETEs. There was little if any chain degradation. The (co)polymer structures were confirmed by FTIR and ¹H-NMR spectroscopic studies. Their thermal properties were studied by DSC and TGA. T_gs of ETE, ESXE, and ESE were -57, 36, and 57°C, respectively, and T_d,os (initial decomposition temperature, TGA) were 331, 198, and 308°C, respectively. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 793–801, 1998     

Spectral assignment of poly(vinyl acetate) by one and two dimensional NMR spectroscopy: Revisited

Poly(vinyl acetate) (PVA) prepared by photopolymerization was studied by a combination of one and two dimensional NMR spectroscopy. The ¹³C{¹H} and ¹H NMR spectra of the homopolymer (PVA) were assigned to the configurational pentads (CH region) and tetrads (CH₂ region). These assignments were substantiated by the use of two dimensional heteronuclear single quantum correlation (HSQC), heteronuclear single quantum correlation‐total correlation spectroscopy (HSQC‐TOCSY) and double quantum filtered correlation spectroscopy (DQFCOSY) experiments. The results obtained by the analysis of the area under the resonance signals confirmed that PVA obeys Bernoullian statistics. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 551–556, 1999     

Crystallization and melting of poly(oxyethylene) analyzed by temperature-modulated calorimetry

Temperature-modulated calorimetry, TMC, is used to evaluate the temperature region of metastability between crystallization and melting. While crystals like indium can be made to melt practically reversibly during a TMC cycle of low amplitude so that sufficient crystal nuclei remain unmelted, linear macromolecules cannot, because of their need to undergo molecular nucleation. Modulation amplitudes varying from ±0.2 to ±3.0 K are used to assess the temperature gap between the slow crystallization region and the melting of metastable crystals of poly(oxyethylene) (PEO) of molar mass 1500 Da. This low molar mass PEO serves as a model compound with a metastable gap of melting/crystallization that can be bridged by TMC with a large modulation amplitude. © 1997 John Wiley & Sons, Inc.

1 This article is a US Government work and, as such, is in the public domain in the United States of America.

J Polym Sci B: Polym Phys 35 : 1877–1886, 1997     

Reversible melting and crystallization of high‐molar‐mass poly(oxyethylene)

The heat capacity of poly(oxyethylene) (POE) with a molar mass of 900,000 Da has been analyzed with differential scanning calorimetry and quasi‐isothermal, temperature‐modulated differential scanning calorimetry. The crystal structure, lattice parameters, and coherently scattering domain sizes have been measured with wide‐angle X‐ray diffraction as a function of temperature. The high‐molar‐mass POE crystals are in a folded‐chain macroconformation and show some locally reversible melting starting already at about 250 K. At 335 K, the thermodynamic heat capacity reaches the level of the melt. The reversible crystallinity depends on the modulation amplitude and has been varied in the melting range from ±0.2 to ±3.0 K. Before melting, there is neither a change in the crystal structure nor a change in the domain size, but the expansivity of the crystals increases at about 320 K. These observations support the interpretation that the monoclinic POE crystals possess a glass transition temperature with a midpoint at about 324 K, whereas the maximum melting temperature is 341 K. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 475–489, 2007     

Solid state NMR study of intercalate complexes of poly(ethylene oxide) and small molecules

From solid state NMR spectra, a lower shielding of poly(ethylene oxide) (PEO) protons, in contrast to higher shielding of PEO carbons, has been found for PEO/hydroxybenzene and PEO/LiCF₃SO₃ complexes in comparison with neat PEO. The same PEO chemical shifts were found both for crystalline and amorphous phase of PEO/LiCF₃SO₃ polymer electrolyte, confirming the same interaction in both phases. Measurements of 2D ¹H CRAMPS exchange NMR spectra have been used to characterize proton distances in complexes of PEO and benzene derivatives. A close contact (∼ 0.3 nm) between aromatic and PEO protons was detected in some cases. From the measurements of the cross polarization ¹H → ¹³C, using Lee-Goldburg irradiation of ¹H nuclei, the distance between LiCF₃SO₃ carbon and the nearest PEO protons in the PEO/LiCF₃SO₃ complex was determined.     

(14)N NMR and two-dimensional suspension (1)H and (13)C HRMAS NMR spectroscopy of ionic liquids immobilized on silica

A variety of popular ionic liquids have been synthesized and characterized, including by optimized (14)N NMR spectroscopy of the neat and dissolved ionic liquids. Ionic liquids incorporating Si(OEt)(3) groups have been immobilized on silica in a well-defined manner with the imidazolium moiety remaining intact. This has been proved by optimized one- and two-dimensional (1)H and (13)C HRMAS NMR spectroscopy of the materials suspended in suitable solvents.     

Synthesis and properties of multiblock copolymers consisting of poly(L‐lactic acid) and poly(oxypropylene‐ co‐oxyethylene) prepared by direct polycondensation

A multiblock copoly(ester–ether) consisting of poly(l ‐lactic acid) (PLLA) and poly(oxypropylene‐co‐oxyethylene) (PN) was prepared and characterized. Preparation was done via the solution polycondensation of a thermal oligocondensate of l ‐lactic acid, a commercially available telechelic polyether (PN: Pluronic‐F68), and dodecanedioic acid as a carboxyl/hydroxyl adjusting agent. When stannous oxide was used as the catalyst, the molecular weight of the resultant PLLA/PN block copolymers became very high (even with a high PN content) under optimized reaction conditions. The refluxing of diphenyl ether (solvent) at reduced pressure allowed the efficient removal of the condensed water from the reaction system and the feed‐back of the intermediately formed l ‐lactide at the same time in order to successfully bring about a high degree of condensation. The copolymer films obtained by solution casting became more flexible with the increasing PN content as soft segments. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1513–1521, 1999