Halo-derivatised calix[4]tubes

Halo functionalisation of calix[4]tubes has been investigated through both derivatisation of individual calix[4]arenes and calix[4]tubes, using classical synthetic methods, to allow preparation of a series of novel derivatives. The solution and solid state properties are in accordance with the constituent[4]arenes adopting flattened cone arrangements which on complexation with potassium simplify to a regular cone. Electrospray and 1H NMR studies, combined with molecular modelling have been used to ascertain the metal binding of this new series of cryptand like ionophores, demonstrating their retained selectivity for binding potassium over other Group 1 metals and the dependence on counter anion in the weak binding of silver.     

N-confused calix[4]pyrroles

This is a first review devoted to N-confused calix[4]pyrroles (NCCPs). NCCPs are a relatively recent arrival to the family of the pyrrole-based anion binding macrocycles, being for the first time identified in 1999. Yet, in a relatively short time these calix[4]pyrrole (CP) isomers attracted attention of the community of research groups interested in anion binding and sensing. This is because they are relatively easy to synthesize, but mainly because they posses anion-binding properties that are different from that of regular calix[4]pyrroles. The difference in anion-binding properties stems from a different binding mode between the NCCP and anion. While the regular CPs adopt in the complex an ideal cone-like conformation where all four pyrroles-NHs engage in hydrogen bonding to the anion, the inverted pyrroles do not allow forming the cone. NCCPs bind anions via a confused cone (CC), by three NH hydrogen bonds with an anion and a CH–anion contact. This different binding mode results also in different anion-binding affinity and selectivity compared to regular CPs. Also, the inverted pyrroles offer a unique possibility for selective chemical modification of the receptor. The corresponding colorimetric sensors were tested for anion binding applications. The results of colorimetric assays for anions are presented and potential applications discussed.     

一种新型杯[4]芳烃的合成

本文通过对特丁基杯[4]芳烃的酚羟基烷基化和苯环特丁基位上的IPSO-硝化制备了一系列对硝基杯[4]芳烃烷基醚,烷基分别是n-C~4H~9(3a)、n-C~8H~1~7(3b)、n-C~1~2H~2~5(3c)和n-C~1~6H~3~3(3d)。^1HNMR表明所有新的杯[4]芳烃都具有锥形(cone)构象。     

Aminolysis reaction of calix [ 4 ] arene esters and crystal structures and conformational behaviors of calix[4]arene amides

We first make use of aminolysis of calix[4]arene esters to synthesize calix[4]arene amides. When the two ethyl esters of the calix[4]arene esters are aminolysized, the 1, 3-amide derivative is formed selectively. The crystal structures of the calix-[4]arene with two butyl amide (3b) and four butyl amide moieties (4b) were determined. The intermolecular hydrogen bonds make 4b form two-dimensional net work insolid state. The 1H NMR spectra prove that 3b is of a pinched cone conformation, while 4b and tetraheptylamide-calix[4]arene (6b) take fast interconversion between two C2v isomers in solution and appear an apparent cone conformation at room temperature. As decreasing temperature, the interconversion rate decreases gradually and, finally, the interconversion process is frozen at Tc = -10℃, which makes both conformations of 4b and 6b the pinched cone structures. The hydrogen bond improves the interconversion barrier, and the large different values of the potential barrier between 6b and 4b (or 6b) may     

Band intensity in the IR spectra and conformations of calix[4]arene and thiacalix[4]arene

The experimental IR and Far IR spectra of the calix[4]arene, p-tert-butylcalix[4]arene, thialcalix[4]arene and p-tert-butylthiacalix[4]arene were examined at different temperatures and interpreted. The band frequencies and intensities in the IR spectra of the calix[4]arene and thialcalix[4]arene were calculated. The absorption curves of the four possible calix[4]arene conformations: cone, partial cone, 1,2- and 1,3-alternate were computed. The bands characteristic for each conformation are defined and assigned. The obtained spectra-structure correlation can be used for the characteristic of calixarenes conformation.     

Calix[4]- and calix[5]arene-based multicavity macrocycles

Synthesis and single-crystal X-ray structures of mixed triple and double calixarenes 6 and 7, obtained from the base-catalyzed condensation of calix[5]arene 1 with cone pertosylated calix[4]arene 2, are reported. VT-NMR studies on 7 are consistent with a molecular motion arising from the anti-gauche conformational interconversion of its ethylene linkages.     

2]Catenane assembly from calix[4]arene crown ethers [In Process Citation

A variety of novel calix[4]arene-incorporating crown ethers with or without intramolecular hydrogen bonding have been prepared by two efficient methods and utilized as donor rings to assemble calix[4]arene [2]catenanes based on pi-stacking interaction between hydroquinone and bipyridinium units. Treatment of calix[4]arene crown ethers 4, 10a, or 10b, whose cone conformation was fixed by intramolecular hydrogen bonding within the calix[4]arene moiety, with dicationic salt 15 x 2PF6 and dibromide 16 afforded the corresponding [2]catenanes 17a x 4PF6, 17b x 4PF6, and 17c x 4PF6 in 20%, 53%, and 55% yields, respectively, whereas from the reactions of 15 x 2PF6 and dibromide 16 in the presence of conformationally flexible 11 or 12 with a cone conformation kept by two propyl groups, [2]catenanes 18 x 4PF6 and 19 x 4PF6 were obtained in 12% and 6% yields. [2]Catenanes 21a x 4Cl, 21b x 4Cl, and 21c x 4Cl, incorporating calix[4]arene in both the donor and acceptor rings, were also successfully assembled from 10a or 10b, 16, and dicationic salts 20a x 2PF6 or 20b x 2PF6. The dynamic 1H NMR and absorption spectra of the [2]catenanes have been investigated, which revealed a strongest donor-acceptor interaction in 17a x 4PF6 and that the cone [2]catenanes 17a-c x 4PF6 can isomerize to the partial cone isomer at high temperature. The difference of the dynamic properties of these catenanes was discussed. The results demonstrate that catenation is one new general method to change the conformational distributions of calix[4]arenes.     

Ab initio and density functional studies of cooperative hydrogen bonding in calix[4]-and calix[6]arenes

The cone conformation of C ₄ symmetry is shown by the Hartree-Fock method (3-21G basis) to be the predominant conformer of calix[4]arene; the compressed cone of C ₂ symmetry is the major conformer of calix[6]arene. Using quantum chemical methods we calculated hydrogen bond cleavage energies for calix[4]-(ab initio and density functional methods) and calix[6]arene (ab initio), and also for the complex of calix[4]arene with carbon disulfide. These energies along with structural data point to the cooperative effect of hydrogen bonds. The results of these studies provided an explanation to the greater conformational lability of calix[6]arene compared with calix[4]arene molecules. It is also predicted that the nucleophilic substitution reaction involving calix[6]arene in the presence of weak bases and in aprotic solvents, as well as in the gas phase, will occur via diastereomeric transition states.     

A proton-doped calix[4]arene-based conducting polymer

Segmented conducting polymers based upon a calix[4]arene scaffold are reported. The cone conformation creates a zigzag orientation of the polymer segments. Their acid-dependent conductivities are similar to the strong pH conductivity dependence of polyaniline which is said to be acid dopable. On the other hand, they have a segmented structure that imposes greater localization of the carriers. The conductivity of such a system can be considered to result from rapid self-exchange between discrete units. Hence, electron exchange between radical cations and p-diquinone salts produces the high conductivity of these polymers.     

Conformational properties of cyanomethoxy calix[4]arenes

O-Alkylation of the dinitro calix[4]arene 2, easily available by selective ipso-nitration of the di-cyanomethyl ether 1, with allylbromide (DMF/Cs2CO3) gave tetraethers 3 and 4 with anti- and syn-orientations of the two allyl ether residues. The two possible stereoisomers of in the partial cone and 1,2-alternate conformation exist as an equilibrium mixture which could be quantitatively analysed by 1H NMR spectroscopy. The temperature dependence of this equilibrium leads to deltaH0 = -7.6 to -9.7 kJ mol(-1) in different solvents (tetrachloroethane, benzene, dimethylsulfoxide). Since 3(1,2-alt) could be obtained in pure form, its isomerisation to the equilibrium mixture with 3(paco) could be followed also kinetically. An activation energy of E(a) = 110.5 kJ mol(-1) was found for this reaction in DMSO-d6. The results were confirmed by similar studies with tetraethers 5 and 6 obtained by O-allylation of 1, although exact thermodynamic and kinetic studies were not possible in this case, since the NMR signals of the respective isomers were strongly overlapping. Single crystal X-ray structures were obtained for 2, 3(1,2-alt), 4(paco) and 5(1,2-alt).     

New artificial receptors from selectively functionalized calix[4]arenes

Abstract

The development of new synthetic methods for the monoalkylation of calix[4]arenes at the lower rim allows the synthesis of a new class of trihydroxamate siderophores. Three chelating hydroxamic acid units are introduced through a sequence of reactions which blocks the macrocycle in the cone conformation. The new ligands obtained form neutral 1:1 complexes (FeL) with iron (III), which are stable in EtOH/H₂O 9:1 at pH 2–7. Calix[4]arene bis-crown ethers are prepared by exploiting the selective 1,2-(proximal) functionalization of calix[4]arenes at the lower rim. These ligands are, however, less effective in complexing alkali metal cations compared with the 1,3-calix[4]arene crown-ethers which, in their partial cone structure, offer a better shielding for the complexed cations. Rigid upper rim-bridged calix[4]arenes potentially useful for the inclusion of neutral molecules are prepared by exploiting the selective 1,3-diformylation of calix[4]arene at the upper rim. Finally a new chloromethylation method for calix[4]arenes blocked in the cone conformation is described together with the synthesis of new cavitands.     

UV band Splitting of chromogenic azo-coupled calix[4]crown upon cation complexation

Calixcrown-6 compounds carrying a pair of phenylazo moieties on the upper rim and two OH groups, one OH group, and two OR groups on the lower rim have been prepared in both the cone and partial cone conformations. UV/vis spectral measurements showed a red shift upon the addition of Ca2+ to the calixcrown carrying two OH groups and a blue shift for the calixcrown carrying two OR groups. For the compounds with two OR groups on the lower rim and a fixed partial cone conformation, a blue shift caused by electrostatic interaction between the oxygen atoms of OR and the metal ion as well as a red shift caused by the pi-metal complexation between the rotated calix benzene and the metal ion were observed.     

Impact of multiple cation-pi interactions upon calix[4]arene substrate binding and specificity

The cation-pi interaction influence on the conformation and binding of calix[4]arenes to alkali-metal cations has been studied using a dehydroxylated model. The model allows for the separation of cooperative cation-pi and electrostatic forces commonly found in the binding motifs found in calixarene complexes. Starting from the four well-known calix[4]arene conformations, six conformers for this dehydroxylated model (cone, partial cone, flattened cone, chair, 1,2-alternate, and 1,3-alternate) have been characterized by geometry optimization and frequency analysis using the Becke three-parameter exchange functional with the nonlocal correlation functional of Lee, Yang, and Parr and the 6-31G(d) basis set. Without the stabilization provided by the hydroxyl hydrogen bonds in calix[4]arene, neither the cone nor the 1,2-alternate conformation is computed to be a ground-state structure. The partial cone, flattened cone, chair, and 1,3-alternate conformers have been identified as ground-state structures in a vacuum, with the partial cone and the 1,3-alternate as the lowest energy minima in the aromatic model. The C(4)(v)() cone conformation is found to be a transition structure separating the flattened cone (C(2)(v)()) conformers. The energetic and structural preferences of the calix[4]arene model change dramatically when it is bound to Li(+), Na(+), and K(+). The number of pi-faces, the positioning of these pi-faces with respect to the cations, and the nature of the cation were studied as factors in the binding strength. A detailed study of the distances and angles between the aromatic ring centroids and the cations reveals the energetic advantages of multiple weak cation-pi interactions. The geometries are often far from the optimal cation-pi interaction in which the cation approaches in a perpendicular path the aromatic ring center, where the quadrupole moment is strongest. The results reveal that multiple weaker nonoptimal cation-pi interactions contribute significantly to the overall binding strength. This theoretical analysis underscores the importance of neighboring aromatic faces and provides new insight into the significance of cation-pi binding, not only for calix[4]arenes, but also for other supramolecular and biological systems.     

Electrochemical investigation of nano-baskets of calix[4]-1,3-crowns-5,6 complexes

Four nano-baskets of calixarene including cone 25,27-di(carboxymethoxy)calix[4]arene-crown-5, 1,3-alternate 25,27-di[carboxymethoxy]-calix[4]arene-crown-5, cone 25,27-bis[carboxymethoxy]calix[4]arene-crown-6 and 1,3-alternate 25,27-di[carboxymethoxy]-calix[4]arene-crown-6 were synthesized and their binding abilities towards alkali and alkaline earth metals as well as some lanthanides were studied using differential pulse voltammetry. The novelty of this study was investigation of those macrocyclic complexes by voltammetric behaviors of two acidic moieties in each scaffold during complexation of crown ether ring. Their voltammetric behaviors were closely related to the complex formation by entrapment of cation into crown ether cavity and ion–dipole interaction between cation and acidic moieties in calixcrowns. The results revealed the selective changes in voltammetric behavior of synthesized scaffolds toward the cations. Moreover, the position of crown ether in 1,3-alternate instead of cone enhanced the domain of binding ability to more cations. Furthermore, it was shown that those carboxylic acid moieties, which were far from the crown ether ring in the 1,3-alternate, did not affected by encapsulated cations in the coordination space of crown ether and showed no voltammetric behavior.     

Microwave-assisted synthesis of 1,3-dialkyl ethers of calix[4]arenes: application to the synthesis of cesium selective calix[4]crown-6 ionophores

Partial etherification of phenolic-OH groups of calix[4]arenes with various alkyl halides/tosylates and K₂CO₃ under microwave irradiation afforded 1,3-dialkoxycalix[4]arenes in their cone conformation only as predominant/sole product in good yields (71–85%). The protocol was found to be much superior to conventional heating both in terms of yield and reaction time. Some of the 1,3-dialkoxycalix[4]arenes were elaborated further to the syntheses of cesium selective calix[4]crown-6 ionophores.     

Effect of conformation on metal ion extraction by calix[4]arene dicarboxylic acids

Synthetic routes to four calix[4]arene stereoisomers with two distal methoxycarboxy groups and two distal butoxy groups are reported. Conformations of cone, partial cone (butyl up), partial cone (acid up), and 1,3-alternate were established by ¹H and ¹³C-NMR spectroscopy. To probe the influence of ligand conformation on metal ion complexation, extractions from aqueous solutions into 1,2-dichloroethane were performed. These included competitive alkali metal cation extractions, competitive alkaline earth metal cation extractions, and single species extractions of Pb²⁺ and of Hg²⁺. Comparisons are also made with the results for a conformationally mobile analogue in which the two butoxy groups are replaced with methoxy groups.     

X-ray guided H NMR analysis of pinched cone calix[4]arenes

The analysis of structural parameters of azobenzene- and stilbene-bridged calix[4]arene obtained from AM1 calculation are in good agreement with those obtained from X-ray crystallography. The bridge longer than 9.0 Å such as p,p-trans-azobenzene and p,p-trans-stilbene cannot be constructed over the narrow rim of calix[4]arene through two ethylene oxide linkers. The m,m-stilbene bridge is the most promising photo switch because its shorter cis stereoisomer (5.85 Å) allows calix[4]arene to assume the perfect cone conformation, whilst its longer trans stereoisomer (8.00 Å) forces calix[4]arene to adapt a pinched cone conformation. The pinched cone conformation has longer distances between the neighbouring phenoxyl groups causing the weaker intramolecular hydrogen bonding and the upfield shifts of the phenolic proton signals to below 7.00 ppm. This upfield shift is useful for quick identification of pinched cone conformation of new calix[4]arene compounds.     

1,3-Alternate calix[4]arenes, selectively functionalized by amino groups

General strategies are described to synthesize calix[4]arenes which are fixed in the 1,3-alternate conformation and substituted selectively by amino groups. These derivatives are useful starting materials for the attachment of various groups via amide bonds, as demonstrated by several examples, but may be converted also to ureas, imides or azomethines. Four amino groups may be attached to the narrow rim via(several) methylene groups as spacer by O-alkylation with omega-bromophthalimides or omega-bromonitriles. From the resulting tetraethers the amino functions are obtained by cleavage with hydrazine or by hydrolysis, allowing a selective functionalisation of both sides of the molecule (phenolic units A, C versus B, D). Amino functions at the wide rim are introduced by ipso-nitration of the respective t-butylcalix[4]arene derivatives and subsequent reduction. Selective ipso-nitration of a 1,3-diether, followed by O-alkylation with allylbromide to obtain the tetraether in the 1,3-alternate conformation, hydrogenation of allyl and nitro groups (in one step), protection of the amino functions as phthalimides followed by ipso-nitration of the remaining t-butyl phenol rings, allows again to distinguish both sides of the molecule (units A, C versus B, D). Reaction of a wide rim tetraamine in the 1,3-alternate conformation by Boc-anhydride allows not only to obtain the mono- and tri-Boc derivative, but also in nearly 60% yield the C2-symmetrical di-Boc derivative, in which two adjacent phenolic units are protected (distinction of A, B from C, D). This paves the way for the preparation of chiral derivatives or assemblies. O-Alkylation with omega-bromophthalimides followed by ipso-nitration leads to precursors for octaamines in the 1,3-alternate conformation, in which the potential amino functions on both rims can be selectively "activated" by reduction or hydrazinolysis. The structures of the newly synthesized molecules were mainly confirmed by their 1H NMR spectra, which allow a distinction from isomeric derivatives in the cone and partial cone conformation. Single crystal X-ray analyses were obtained for two analogous derivatives in the 1,3-alternate conformation (27, n = 3,4), an isomeric compound in the cone conformation (27, n = 3,4), and a derivative in the partial cone conformation (11).     

Conformational features and anion-binding properties of calix[4]pyrrole: a theoretical study

The conformational preference of calix[4]pyrrole and its fluoride and chloride anion-binding properties have been investigated by density functional theory calculations. Geometries were optimized by the BLYP/3-21G and BLYP/6-31G methods, and energies were evaluated with the BLYP/6-31+G method. To model the effect of medium, the SCIPCM solvent model was also employed. Four typical conformations of the parent substituent-free calix[4]pyrrole were studied. Both in the gas phase and in CH(2)Cl(2) solution, the stability sequence is predicted to be 1,3-alternate > partial cone > 1,2-alternate > cone. The cone conformation is predicted to be about 16.0 and 11.4 kcal/mol less stable in the gas phase and CH(2)Cl(2) solution, respectively. This is mainly due to electrostatic repulsions arising from the all-syn pyrrole/pyrrole/pyrrole/pyrrole arrangement present in this conformer. The existence of possible 1:1 and 1:2 anion-binding modes were explored in the case of fluoride anion, and the factors favoring the 1:1 binding mode are discussed. The calculated binding energy for fluoride anion is about 15 kcal/mol larger than that for chloride anion. The calculated binding energy for chloride anion agrees with the experimental value very well. The presence of meso-alkyl substituents destabilizes the cone conformer with respect to the 1,3-alternate conformer and, therefore, reduces the anion-binding affinity by 3-4 kcal/mol. The strength of N-H- - -anion hydrogen bonds in the various structures subject to study were estimated on the basis of the calculated anion-binding energies and the predicted structural deformation energies of substituent-free calix[4]pyrrole.     

Binucleating behaviour of a proximally-diphosphinated calix[4]arene

The long diphosphine 5,11-diphenylphosphanyl-25,26-dipropyloxy-27,28-bis(2-propenyloxy) calix[4]arene (cone) (5), in which the two phosphorus atoms are separated by a semi-rigid linking unit, was prepared in four steps starting from calix[4]arene. Reaction of 5 with AuCl(SEt(2)) or [RuCl(2)(p-cymene)](2) led to calixarenes bearing two metallated pendant arms, [5·(AuCl)(2)] and [5·{RuCl(2)(p-cymene)}(2)], respectively. In the presence of AgBF(4) or [Ni(C(5)H(5))(1,5-cyclooctadiene)]BF(4), diphosphine 5 displayed a marked tendency to form oligomeric material, but under high dilution conditions dimeric species were obtained selectively. The inability of 5 to form chelate complexes was further illustrated by its reaction with [PdCl(2)(1,5-cyclooctadiene)(2)], which led quantitatively to a rare complex in which a diphosphine spans across the dinuclear [PdCl(μ-Cl)(2)PdCl] unit.