Determination of ranitidine, nizatidine, and cimetidine by a sensitive fluorescent probe

A validated, simple, and sensitive fluorescence quenching method for the determination of ranitidine, nizatidine, and cimetidine in tablets and biological fluids is presented. This is the first single fluorescence method reported for the analysis of all three H(2) antagonists. The competitive reaction between the investigated drug and the palmatine probe for the occupancy of the cucurbit[7]uril (CB[7]) cavity was studied using spectrofluorometry. CB[7] was found to react with the probe to form a stable complex. The fluorescence intensity of the complex was also enhanced greatly. However, the addition of the drug dramatically quenched the fluorescence intensity of the complex. Accordingly, a new fluorescence quenching method for the determination of the studied drugs was established. The different experimental parameters affecting the fluorescence quenching intensity were studied carefully. At optimum reaction conditions, the rectilinear calibration graphs between the fluorescence quenching values (ΔF) and the medicament concentration were obtained in the concentration range of 0.04-1.9 μg mL(-1) for the investigated drugs. The limits of detection ranged from 0.013 to 0.030 μg mL(-1) at 495 nm using an excitation wavelength of 343 nm. The proposed method can be used for the determination of the three H(2) antagonists in raw materials, dosage forms and biological fluids.     

Highly sensitive fluorescent probe for detection of alkaloids

A new fluorescent probe, based on an amphiphilic Schiff-base zinc(II) complex, 1, for the sensitive detection of some important classes of alkaloids is presented. It exhibits optical absorption changes and fluorescence enhancement upon formation of 1:1 1·alkaloid adducts. Four diverse classes of alkaloids, represented by their basic structures and related representative prototypes, are investigated, through the study of optical and binding properties of 1·alkaloid adducts. It is found that the chromogenic and fluorogenic complex 1 is selective between these classes of alkaloids in the micromolar range, with a limit of quantification of 0.40 μM for nicotine and 0.43 μM for cinchonine.     

Berberine alkaloid as a sensitive fluorescent probe for bile salt aggregates

Effect of sodium cholate (NaC) bile salt on the absorption and fluorescence properties of berberine cation was studied in aqueous solution and water-cosolvent mixtures. The alteration of the fluorescent behavior with increasing NaC concentration showed an entirely different trend from that found previously in the presence of sodium dodecylsulfate. Binding to bile salt agglomerates led to significant fluorescence intensity enhancement, and the fluorescence lifetime of berberine proved to be highly sensitive to the structure and size of the aggregates. The dual exponential decay kinetics above 10 mM NaC concentration showed that the probe resided in two totally different binding sites. At 2-10 mM NaC concentrations, only primary aggregates were detected. The aggregate disrupting power of cosolvents decreased in the series of dimethylformamide, acetonitrile, formamide, and methanol. These compounds enhanced the water accessibility of berberine bound to aggregates and diminished the number of secondary aggregates.     

Determination of non-protein cysteine in human serum by a designed BODIPY-based fluorescent probe

A novel fluorescent probe is designed and synthesized for the determination of cysteine in biological samples by incorporating 2,4-dinitrobenzenesulfonyl (DBS) group as a quencher into the BODIPY skeleton. The BODIPY-based probe itself shows weak fluorescence due to the strong intramolecular charge transfer process. Upon reaction with cysteine, however, the probe produces a rapid and large fluorescence enhancement through the removal of the DBS unit by nucleophilic aromatic substitution. This valuable property leads to the development of a new and simple method for cysteine assay. Under the optimized conditions, the fluorescence enhancement value is directly proportional to the concentration of cysteine in the range 2-12 μM, with a detection limit of 30 nM (S/N = 3). The applicability of the developed method has been successfully demonstrated on the determination of non-protein cysteine in human serum. Compared to most of the existing fluorescent probes proposed for cysteine, the BODIPY-based one exhibits an excellent overall performance in terms of selectivity, sensitivity and simplicity.     

Novel magnetic and fluorescent nanocomposite as a sensitive probe for the determination of proteins

The Fe(3)O(4)/(sodium oleic acid/ethyltrimethyl ammonium bromide)(n)/4-aminobenzoic acid (Fe(3)O(4)/(NaOL/CTAB)(n)/PABA) nanocomposites have been prepared by a layer-by-layer self-assembly approach. This kind of nanocomposites have fluorescent, magnetic and water-soluble properties. Taking advantage of the magnetic property of nanocomposites, we can separated them from solution easily by using a permanent magnet. By using their strong fluorescence, we can detect proteins. At pH 6.98, the fluorescence of Fe(3)O(4)/(NaOL/CTAB)(n)/PABA nanocomposites can be enhanced by the proteins. Under optimal conditions, the linear ranges of calibration curves were 0.2-20, 0.2-13, 0.2-10 microg mL(-1) for gamma-globulin (gamma-IgG), human serum albumin (HSA), and bovine serum albumin (BSA), respectively. The detection limits were 0.02, 0.01, 0.02 for gamma-IgG, HSA and BSA, respectively. The method has been applied to analyze the total proteins in human samples and the results were in good agreement with those reported by the hospital. This method is sensitive, simple and potential in many areas.     

An NBD fluorophore-based sensitive and selective fluorescent probe for zinc ion

A novel NBD-derived fluorescent probe for Zn(2+) is described; the probe features ready availability, good water solubility, high sensitivity and selectivity, and ability to quantify the concentration of Zn(2+).     

Reversible fluorescent probe for highly selective and sensitive detection of mercapto biomolecules

A coumarin-derived complex, Hg(2)L(2), was reported as a highly sensitive and selective probe for the detection of mercapto biomolecules in aqueous solution. The addition of Cys to a 99% aqueous solution of Hg(2)L(2) resulted in rapid and remarkable fluorescence OFF-ON (emission at 525 nm) due to the ligand-exchange reaction of Cys with L coordinated to Hg(2+). The increased fluorescence can be completely quenched by Hg(2+) and recovered again by the subsequent addition of Cys. Such a fluorescence OFF-ON circle can be repeated at least 10 times by the alterative addition of Cys and Hg(2+) to the solution of Hg(2)L(2), indicating that it can be used as a convertible and reversible probe for the detection of Cys. The interconversion of Hg(2)L(2) and L via the decomplexation/complexation by the modulation of Cys/Hg(2+) was definitely verified from their crystal structures. Other competitive amino acids without a thiol group cannot induce any fluorescence changes, implying that Hg(2)L(2) can selectively determine mercapto biomolecules. Using confocal fluorescence imaging, L/Hg(2)L(2) as a pair of reversible probes can be further applied to track and monitor the self-detoxification process of Hg(2+) ions in SYS5 cells.     

A turn-on fluorescent probe for selective and sensitive detection of hydrogen sulfide

An imidazolethione based turn-on fluorescent probe was synthesized for the detection of hydrogen sulfide, a biologically relevant molecule and an important air pollutant. The probe rapidly and selectively reacted with hydrogen sulfide to produce a strongly fluorescent product, resulting in the fluorescence enhancement of the system. The detection limit was determined to be 30 nM at the probe concentration of 1.0 μM. An indicating paper for visual detection of hydrogen sulfide gas has been fabricated by immobilizing the probe on a piece of appropriate paper substrate, and the detection limit of the visual method reached as low as 0.7 ppm. Moreover, the fluorescence turn-on/off of the system showed good reversibility when exposed alternately to hydrogen sulfide and mercuric ion, which was utilized to make an INHIBIT logic circuit for the presence of the two species.     

Thiol-stabilized luminescent CdTe quantum dot as biological fluorescent probe for sensitive detection of methyl parathion by a fluoroimmunochromatographic technique

Quantum dots (QDs) are preferred as high-resolution biological fluorescent probes because of their inherent optical properties compared with organic dyes. This intrinsic property of QDs has been made use of for sensitive detection of methylparathion (MP) at picogramme levels. The specificity of the assay was attributed to highly specific immunological reactions. Competitive binding between free MP and CdTe QD bioconjugated MP (MP-BSA-CdTe) with immobilized anti-MP IgY antibodies was monitored in a flow-injection system. The fluorescence intensity of MP-BSA-CdTe bioconjugate eluted from the column was found to be directly proportional to the free MP concentration. Hence, it was possible to detect MP in a linear range of 0.1–1 ng mL⁻¹ with a regression coefficient R ² = 0.9905. In this investigation, IgY proved advantageous over IgG class immunoglobulins in terms of yield, stability, cost effectiveness, and enhancement of assay sensitivity. The photo-absorption spectrum of bioconjugated CdTe QD (λ _max = 310 nm) confirmed nano-biomolecular interactions. The results suggest the potential application of bioconjugation and nano-biomolecular interactions of QDs for biological labeling and target analyte detection with high sensitivity.     

Synthesis of a novel fluorescent probe based on acridine skeleton used for sensitive determination of DNA

In this study, a novel fluorescent probe of acridine derivative N-((N-(2-dimethylamino)ethyl)acridine-4-carboxamide)-alpha-alanine (N-(ACR-4-CA)-alpha-ALA) was synthesized. The structure of the new compound was characterized by (1)H NMR, MS, elemental analysis, fluorescent and ultraviolet spectra. It was found that DNA had the ability to quench the fluorescence of N-(ACR-4-CA)-alpha-ALA, and the quenched intensity of fluorescence was proportional to the concentration of DNA. A method for DNA determination based on the quenching fluorescence (lambda(ex) = 260 nm, lambda(em) = 451 nm) of N-(ACR-4-CA)-alpha-ALA was established. Under optimal conditions, the linear range is 0.05-2.0 microg mL(-1) for both fish semen (fsDNA) and calf thymus DNA (ctDNA). The corresponding determination limits are 9.1 ng mL(-1) for fsDNA and 8.7 ng mL(-1) for ctDNA, respectively. The results suggested that the interaction mode between N-(ACR-4-CA)-alpha-ALA and DNA was intercalative binding. The intrinsic binding constant was determined and the result showed a large binding constant of N-(ACR-4-CA)-alpha-ALA with DNA.     

Dual-site fluorescent probe for highly selective and sensitive detection of sulfite and biothiols

A dual-site fluorescent probe that could discriminatively respond to Cys and HSO^3- through two emission channels was reported, and it could further applied in imaging biothiols in living cells.     

A highly sensitive two-photon fluorescent probe for mitochondrial zinc ions in living tissue

We report a highly sensitive two-photon probe (SZn2-Mito) which shows a 70-fold two-photon excited fluorescence enhancement in response to Zn(2+) and can selectively detect mitochondrial Zn(2+) in a rat hippocampal slice at a depth of 100-200 μm by using two-photon microscopy.     

Determination of the activity of telomerase in cancer cells by using BSA-protected gold nanoclusters as a fluorescent probe

Gold nanoclusters (AuNCs) protected with a bovine serum albumin (BSA) coating are known to emit red fluorescence (peaking at 650 nm) on photoexcitation with ultraviolet light (365 nm). On addition of Cu(II) ions, fluorescence is quenched because Cu(II) complexes certain amino acid units in the BSA chain. Fluorescence is, however, restored if pyrophosphate (PPi) is added because it will chelate Cu(II) and remove it from the BSA coating on the AuNCs. Because PPi is involved in the function of telomerase, the BSA@AuNCs loaded with Cu(II) can act as a fluorescent probe for determination of the activity of telomerase. A fluorescent assay was worked out for telomerase that is highly sensitive and has a wide linear range (10 nU to 10 fM per mL). The fluorescent probe was applied to the determination of telomerase activity in cervix carcinoma cells via imaging. It is shown that tumor cells can be well distinguished from normal cells by monitoring the differences in intracellular telomerase activity.

Open image in new window

Graphical abstract Gold nanoclusters (AuNCs) protected by bovine serum albumin (BSA) and displaying red photoluminescence were prepared as fluorescent probe for the determination of telomerase activity and used for imaging of cervix carcinoma (HeLa) cells.

     

Detection of DNA base variation and cytosine methylation at a single nucleotide site using a highly sensitive fluorescent probe

A fluorescent DNA probe containing an anthracene group attached via an anucleosidic linker can identify all four DNA bases at a single site as well as the epigenetic modification C/5-MeC via a hybridisation sensing assay.     

Synthesis and application of highly sensitive fluorescent probe for Hg2+ regulated by sulfur

Rhodamine-based fluorescent probe is widely used in chemical analysis, environmental analysis and life sciences area due to their excellent optical properties. Based on the thiophilic property of Hg~(2+), using C = S structural motif as the core segment, our group have designed and synthesized three novel probes containing cinnamyl aldehyde with different substituents, exhibiting high selectivity and excellent sensitivity. The structure-property relationships of these probes have been investigated that the optical change caused by electron withdrawing effect and heavy atom effect. Furthermore, these Hg~(2+) probes could be applied in living mice imaging, which provide a promising tool for quantitative mercury(Ⅱ) ion imaging in living organism.     

Highly sensitive fluorescent probe for selective detection of Hg2+ in DMF aqueous media

A highly sensitive fluorescent probe 1 for selective detection of Hg ion in mixed N,N-dimethylformamide aqueous media was designed and prepared by incorporating the well-known Rhodamine 6G fluorophore and a carbohydrazone binding unit into one molecule. The fluorescent probe 1 can detect the parts per billion level of HgII in a mixed aqueous environment and displays a highly selective response of fluorescence enhancement toward HgII.     

Construction of a FRET-based ratiometric fluorescent thiol probe

We have rationally constructed a novel FRET-based ratiometric thiol probe suitable for ratiometric imaging in living cells based on the native chemical ligation reaction.