茂金属 乙烯的流变性与加工性

研究了丁烯－１共聚的茂金属聚乙烯（mＰＥ）的流变性,发现茂金属聚乙烯的窄分子量分 布导致它在挤出加工剪切范围里熔体粘度高、对剪切敏感性差以及熔体从牛顿型转为非牛顿型所需的剪切速率、转变应力高,在挤出加工条件下流动性差,加工困难。对茂金属聚乙烯（mＰＥ）进行改性制得ＭmＰＥ,ＭmＰＥ熔体对温度、剪切速率的敏感性提高,在加工温 度、加工剪切范围里的天观粘度降低,加工流动性得到了显著的改进,可在普通聚乙烯加工     

茂金属聚乙烯和低密度聚乙烯共混物的流变行为

研究了茂金属催化乙烯丁烯1共聚物mPE和LDPE共混物的流变行为.测定了一系列共混物的稳态剪切粘度和动态粘弹性,用改进Cross模型拟合实验数据.mPE的零切粘度η₀较小,从牛顿型转变为非牛顿型所需的剪切速率较大,转变应力较高,在挤出加工剪切速率范围内熔体粘度高,对剪切敏感性差,这是由于它有较低的重均分子量、窄的分子量分布(M_w/M_n=21)所致.对于对数加和规律,共混物η₀在mPE/LDPE为50/50和25/75时有强烈的正偏差,这是由于共混物自由体积减小所致.共混物的转变应力τ^*和非牛顿指数n随LDPE加入量增大而降低,表明共混物对剪切的敏感性提高,加工性得到改善.G'和G”的一致性说明mPE和LDPE共混是相容的.     

超高分子量聚苯乙烯的流变性能

以毛细管流变仪和Hakke转矩流变仪对稀土催化合成的超高分子量聚苯乙烯 (UHMWPS)的流变与加工性能进行了研究 .结果表明 ,UHMWPS最显著的流变特征为超高的熔体粘度和低剪切速率下出现不稳定流动 .不稳定流动与超高分子量聚合物长的松弛时间有关 ,并提出了临界剪切速率与分子量和温度的定量关系式 .较低的分子量和较高的温度有利于提高临界剪切速率 ,改善挤出物外观质量和降低熔体粘度 .分子链极度缠结不仅导致超高的熔体粘度 ,也使UHMWPS链解缠加快 ,导致更高的剪切速率敏感性 .UHMWPS塑化时熔体粘度高 ,转矩大 ,加工性能劣于通用聚苯乙烯 (GPPS)     

芳香族热致液晶聚（对羟基苯甲酸－对苯二甲酸双酚A酯）的流变性能

用Ｉｎｓｔｒｏｎ３２１１型毛细管流变仪研究了以对羟基苯甲酸（ＰＨＢ）、对苯二甲酸（ＴＰＡ）和双酚Ａ（ＢＰＡ）为单体合成的共聚芳酯液晶熔体的流变性能。结果表明，切变速率、熔体温度及ＰＨＢ链节含量对切粘度和结构粘度有很大的影响。切变速率在１０～１０３／Ｓ、温度２９５～３３０℃范围内，共聚酯粘流活化能△Ｅη为７４．５～２０５．１（ｋＪ／ｍｏｌ）。液晶熔体在剪切流中存在屈服应力τｏ，随温度升高τｏ值降低。在低温、低切变速率下，共聚酯熔体的弹性很小，甚至呈现挤出收缩现象。     

茂金属聚乙烯分子链流变学模型研究进展

茂金属聚乙烯的分子链长支化结构对其流变特性有重要影响，长支链可以使熔体弹性和剪切变稀效应明显增强。本文介绍了茂金属聚乙烯分子链模型建立的理论依据，从流变学角度综述了近年来茂金属聚乙烯分子链结构模型的研究进展，阐述了有关的长链支化结构模型及其与流变性能的关系。     

超声辐照下聚乙烯熔体挤出流变特性的研究

研究了超声辐照作用下HDPE和LLDPE的挤出流变特性。结果表明,超声辐照可以促进聚乙烯分子链段的运动,降低熔体的挤出口模压力和表观粘度,明显提高聚乙烯熔体的流动性,使挤出物外观质量明显提高,为改善聚乙烯的加工性能及制品质量提供了新途径。     

尼龙6/(乙烯-辛烯)共聚物弹性体的流变及结晶行为

（乙烯 辛烯）共聚物弹性体（ＰＯＥ）是由美国ＤＯＷ化学公司使用茂金属催化剂聚合而成的一种聚烯烃橡胶．与传统聚烯烃类橡胶ＥＰＤＭ相比,ＰＯＥ的特点就在于其在聚烯烃塑料基体中分散速度快、分散程度高．为此,我们尝试用马来酸酐接枝的ＰＯＥ（ＰＯＥ ｇ ＭＡ）...     

茂金属聚乙烯的非等温结晶行为

茂金属聚乙烯的非等温结晶行为曾继军李育英何嘉松＊（中国科学院化学研究所工程塑料国家重点实验室北京１０００８０）关键词茂金属聚乙烯非等温结晶ＫｅｙｗｏｒｄｓＭｅｔａｌｏｃｅｎｅｐｏｌｙｅｔｈｙｌｅｎｅＮｏｎｉｓｏｔｈｅｒｍａｌｃｒｙｓｔａｌｉｚａｔｉｏ...     

茂金属线性低密度聚乙烯的组成均匀性

茂金属线性低密度聚乙烯的组成均匀性徐旭荣徐君庭封麟先陈伟（浙江大学高分子科学与工程学系杭州３１００２７）（中国石化总公司石油化工科学研究院北京１０００８３）关键词线性低密度聚乙烯，组成均匀性，茂金属催化剂８０年代以来，茂金属催化剂得到迅速发展．...     

几种典型含氟树脂流变行为研究概述

主要对乙烯-四氟乙烯共聚物(ETFE)、聚全氟乙丙烯(FEP)、聚偏氟乙烯(PVDF)、全氟磺酸树脂(PFSA)和全氟羧酸树脂(PFCR)这几种典型含氟树脂的加工流变行为和线性粘弹性进行了综述。FEP高速挤出时稳定流动区非常窄,并且进行模型拟合时发现其剪切流动行为符合Carreau模型。ETFE为热流变简单高分子,其剪切粘度、拉伸粘度、挤出胀大和动态模量等流变函数均可进行时温叠加。在低剪切速率下,PVDF熔体表现出牛顿流体行为;在高剪切速率下,PVDF熔体呈现出剪切稀化现象。PFSA和PFCR熔体的表观黏度随剪切速率、温度的升高而降低,流动曲线显示该熔体属于假塑性流体。     

Effects of ultrasonic oscillations on linear viscoelastic behaviors of metallocene‐catalyzed linear low density polyethylene and its blends with low density polyethylene

The effects of ultrasonic oscillations on linear viscoelastic behaviors of metallocene‐catalyzed linear low density polyethylene (mLLDPE) and its blends with low density polyethylene (LDPE) were investigated in this article. The experimental results showed that ultrasonic oscillations can increase the cross modulus, characteristic time, plateau modulus, complex viscosity, zero shear viscosity, and flow activation energy of mLLDPE. Molecular weight of mLLDPE increases but molecular polydispersity index decreases in the presence of ultrasonic oscillations. It has been found for mLLDPE/LDPE blends that the addition of LDPE as well as ultrasonic oscillations can decrease the cross modulus but increase the characteristic time of the blends. The complex viscosity, zero shear viscosity, and flow activation energy of the blends increase by the addition of LDPE, but decrease in the presence of ultrasonic oscillations. Shear thinning effect of the blends is improved because of the addition of LDPE. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 3030–3043, 2005     

聚醚酯嵌段共聚物熔体的流变性能

采用毛细管流变仪测定了组成比、聚醚分子量、熔融时间和熔融温度对嵌段聚醚酯熔体表观粘度的影响．结果发现在所研究的温度和切变速率范围内,该结构聚醚酯熔体为假塑性非牛顿流体,其粘度随聚酯段含量的增加而增加,随熔融时间增加而降低,随聚醚分子量的增大而增大．聚醚酯的零切粘度可由Ｓｐｅｎｃｅｒ Ｄｉｌｌｏｎ 公式外推得到,零切粘度对温度的依赖关系服从Ａｎｄｒａｄｅ 公式．     

Linear viscoelastic behaviors of polybutene-1 melts with various structure parameters

The effects of weight-average molecular(Mw), molecular weight distribution(MWD), and isotacticity on the linear viscoelastic behavior of polybutene-1 melts are studied. It is observed that the linear viscoelastic region becomes slightly narrower with increasing frequency. In frequency sweeps, the transition of the polymer melts flow from Newtonian flow to power-law flow can be observed. The melts with higher Mw and/or broader MWD, as well as higher isotacticity exhibit higher complex viscosity, zero shear viscosity, viscoelasticity moduli, relaxation modulus, broader transition zone, while lower critical shear rate, non-Newtonian index, and the frequency at which elasticity begins to play an important role. The relationship of zero shear viscosity on Mw has been established, which agrees with the classical power law. Furthermore, it is found that the cross-over frequency decreases with increasing Mw and the cross-over modulus increases with narrowing MWD.     

茂金属聚乙烯的非等温结晶动力学

对茂金属催化和传统工艺生产的聚乙烯的非等温结晶行为进行了研究,用ＤＳＣ测试了两种聚乙烯的非等温结晶过程,对所得数据分别用Ｏｚａｗａ方程和莫志深方法进行了处理,发现：由于茂金属聚乙烯有着较高的立构规整性．所以虽然它的分子链较长,但结晶速率高于传统聚乙烯,两种聚乙烯非等温结晶过程中的成核和生长机理也不同,茂金属聚乙烯的生长维数高于传统聚乙烯     

Dynamic rheological behaviors of metallocene-based ethylene-butene copolymers and their blends with low-density polyethylene

The dynamic rheological properties of three metallocene-based ethylene-butene copolymers were examined and were compared with those of some conventional ethylene-butene copolymers and of a low density polyethylene (LDPE). Compared with the conventional ethylene copolymers, the metallocene-based copolymers exhibit the following dynamic rheological features: (1) lower viscoelastic moduli and viscosity at small frequencies, but larger viscoelastic moduli and viscosity at large frequencies, thus a small shear thinning effect; (2) larger values of flow activation energy; (3) a relatively fast relaxation rate. These features are the results of simultaneous absence of high molecular weight tails and low molecular weight tails in the metallocene-based copolymers. The dynamic rheological properties of blends of various ethylene-butene copolymers with LDPE were also investigated. It is found that the addition of LDPE can raise the viscosity at low frequencies but lower the viscosity and elasticity at higher frequencies, and retard the relaxation rate of the metallocene-based ethylene copolymers. However, the improvement in rheological properties by LDPE varies with the polymer samples and there is no improvement for the conventional copolymer G.     

Rheological transition of concentrated emulsions during successive shearing cycles

Rheological investigations have identified a shear viscosity transition from shear thinning to Newtonian at low to moderate shear rates for concentrated polydimethylsiloxane emulsions during successive shearing cycles. The viscosity "flattening" behavior is dependent on the maximum shear rate applied and on droplet deformation. Atomic force microscopy measurements indicate attraction between the "repulsive" emulsion droplets under deformation. The results suggest formation of stable droplet layers due to deformation under high shear hydrodynamic compression. Based on these findings, unique methods to control the post-shear rheology of concentrated emulsions can be envisaged.