Stimuli-responsive membranes through peroxidation radiation-induced grafting of 2-hydroxyethyl methacrylate (2-HEMA) onto isotactic polypropylene film (IPP)

Stimuli-responsive membranes were prepared by peroxidation radiation-induced grafting of 2-hydroxyethyl methacrylate (2-HEMA) onto IPP. The radioactive isotope ⁶⁰Co was used as the source of gamma radiation. A plausible mechanism of grafting has been proposed. Using this method, the degree of grafting and morphology could be controlled through the variation of reaction parameters such as total dose, inhibitor concentration, monomer concentration, reaction time, reaction temperature and solvents. Maximum percentage of grafting (210?%) was obtained at total radiation dose of 20?kGy. The graft copolymerization reaction was carried out for 3?h with 20?v/v% of the monomer (2-HEMA) in methanol at 85?°C using 0.06?wt% of FeCl₃ as inhibitor. The chemical structures of grafted membranes were characterized by Fourier transform infrared spectroscopy (FTIR) which indicates that HEMA has been grafted onto IPP. The atomic force microscopy (AFM), scanning electron microscopy (SEM) techniques were used to assess the morphological characterization of the membranes, revealing the roughness of the surface. These membranes were investigated for their swelling behavior. pH-sensitivity and the dyeability of the grafted and ungrafted membranes have also been studied.     

Grafting onto polypropylene. I. Effect of solvents in gamma radiation-induced graft copolymerization of poly(acrylonitrile)

Graft copolymerization of acrylonitrile (AN) onto isotactic polypropylene (PP) fiber has been studied by using gamma rays from a 2100 Ci ⁶⁰Co source as initiator by preirradiation technique. The preirradiated PP was treated with AN and the mixture was graft copolymerized by heating to 100°C for different time periods. The percentage of grafting is determined as a function of total dose, reaction time, and monomer concentration. The effect of different solvents such as H₂O, CH₃OH, and dioxane upon percentage of grafting has been studied. The maximum effect was observed in water and the minimum in CH₃OH. PP—g—PAN was characterized by IR spectroscopic and thermogravimetric methods. A plausible mechanism of gamma radiation induced grafting of AN onto PP in the absence and in the presence of solvents has been proposed. An attempt has been made to compare the relative abilities of different solvents to influence grafting.     

UV radiation induced graft copolymerization of allyl acetate onto poly(ethylene terephthalate) (PET) films for fuel cell membranes

Ultraviolet（UV）-induced graft copolymerization of allyl acetate（AA） monomer onto polyethylene terephthalate) （PET） films and the subsequent sulfonation on the monomer units in the grafting chain using chlorosulfonic acid（ClSO₃H） were carried out to prepare proton exchange membranes（PEMs） for fuel cells.A maximum grafting value of 12.8%was found for 35 vol%allyl acetate after 3 h radiation time.Optimum concentration of C1SO₃H was selected for the sulfonation reaction to be 0.05 mol/L based on the degree of sulfonation and the tensile strength studies of the membrane.The degree of sulfonation increased as the sulfonation reaction temperature and sulfonation time were increasing.The radiation grafting and the sulfonation have been confirmed by titrimetric and gravimetric analyses as well as FTIR spectroscopy.The maximum ion exchange capacity（IEC） of 0.04125 mmol g^-1 was found at 12.1%degree of sulfonation and the maximum proton conductivity was found to be 0.035 S cm^-1 at 30℃and a relative humidity of 60%.The various physical and chemical properties of the PEMs such as water uptake,mechanical strength,thermal durability and oxidative stability were also studied.To investigate the suitability of the prepared membrane for fuel cell applications,its properties were compared with those of Nafion 117.     

Gamma radiation induced graft copolymerization of vinyl monomers onto poly(vinyl alcohol)

In an attempt to modify water-soluble synthetic polymers, graft Copolymerization of methylmethacrylate (MMA) and ethyl acrylate (EA) onto poly(vinyl alcohol), PVA, has been studied by using gamma irradiation from a Co⁶⁰ source as initiator. The graft copolymerization was carried out in an aqueous medium by the mutual method in air. The effect of total dose and concentration of vinyl monomers on percentage of grafting has been determined. Water plays a significant role in the enhancement of graft copolymerization and the optimum amount of water to afford maximum grafting has been evaluated. The effect of CH₃OH on aqueous grafting of MMA and EA by radiation method has been studied. The graft copolymer has been characterized by IR spectroscopic and thermogravimetric methods.     

Radiation grafting of acrylonitrile on ethylene-propylene diene terpolymer rubber: Optimization of grafting parameters and oil resistance properties

Radiation induced grafting of acrylonitrile (ACN) on ethylene-propene diene terpolymer (EPDM) rubber film was investigated by mutual radiation grafting technique. Effect of experimental variables viz. radiation dose, dose rate, type of solvent and monomer content on extent of grafting was studied. From the kinetic studies a mathematical relation R _g α[M]^0.7 D ^0.68 showing non-linear relationship for rate of grafting with monomer concentration and dose was deduced. The grafted samples showed increased hardness and oil resistance.     

Post-irradiation time effects on the graft of poly(ethylene-alt-tetrafluoroethylene) (ETFE) films for ion exchange membrane application

Grafting of styrene followed by sulfonation onto poly(ethylene-alt-tetrafluoroethylene) (ETFE) was studied for synthesis of ion exchange membranes. Radiation-induced grafting of styrene onto ETFE films was investigated after simultaneous irradiation (in post-irradiation condition) using a ⁶⁰Co source. The ETFE films were irradiated at 20 kGy dose at room temperature and chemical changes were monitored after contact with styrene for grafting. The post-irradiation time was established at 14 days when the films were remained in styrene/toluene 1:1 v/v. After this period the grafting degree was evaluated in the samples. The grafted films were sulfonated using chlorosulfonic acid and 1, 2-dichloroethane 20:80 (v/v) at room temperature for 5 h. The membranes were analyzed by infrared spectroscopy (FTIR), differential scanning calorimeter (DSC), thermogravimetric measurements (TG) and degree of grafting (DOG). The ion exchange capacity (IEC) of membranes was determined by acid–base titration and the values for ETFE membranes were achieved higher than Nafion^® films. Preliminary single cell performance was made using pure H₂ and O₂ as reactants at a cell temperature of 80 °C and atmospheric gas pressure. The fuel cell performance of ETFE films was satisfactory when compared to state-of-art Nafion^® membranes.     

Preparation of poly(ε-caprolactone)-co-poly(acrylic acid) by radiation-induced grafting

Acrylic acid was grafted onto poly(ε-caprolactone) (PCL) films by using electron beam (EB) preirradiation technique. The effect of reaction time, monomer concentration, radiation dose, time between irradiation and grafting, radiation atmosphere, and polymer crystallinity on the extent of grafting were studied. Silver and tin ions were attached to the grafted chains in order to study the grafting process. The irradiation in air was initially more rapid, but the final extent of grafting was the same when irradiated in nitrogen atmosphere. Maximum grafting extents exceeding 400% could be obtained. The optimal grafting was obtained at an acrylic acid to water ratio of 30 : 70. The grafting process could be initiated at a dose as low as 12 kGy. The grafting process proved to start at the surface and was extended into the bulk with time. The ability to form crystals was reduced as the grafting extent increased. The water uptake of the poly(ε-caprolactone)-graft-poly(acrylic acid) was increasing with increasing grafting extent, but reached a maximum of ca 100% for all grafting extents above 85%. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1805–1812, 1998     

The antibacterial finish of cotton via sols containing quaternary ammonium salts

The sols containing quaternary ammonium salts were prepared via sol-gel process. The effects of the molar rate of HCl, H₂O and EtOH to TEOS on the sol viscosity were investigated in detail. Cetyltrimethylammonium bromide (CTAB), Octadecyl dimethyl benzyl ammonium chloride (DC) and Ethylene-Bis (Octadecyl trimethyl ammonium chloride) [E-Bis(OTAC)]were added in the sols and applied to cotton samples by treated. The antibacterial activities of the samples were assessed against both Escherichia coli and Staphylococcus aureus bacteria. The samples treated by E-Bis(OTAC) sol exhibited the satisfactory antibacterial activity that resulted from the more microorganism adsorption and hydrophobicity. The antibacterial activities were still excellent after 10 times washings comparison with the control samples.     

Pre‐Irradiation Grafting of Styrene/Divinylbenzene onto Poly(tetrafluoroethylene‐co‐hexafluoropropylene) from Non‐Solvents

Pre‐irradiation grafting of styrene/divinylbenzene (DVB) onto poly(tetrafluoroethylene‐co‐hexafluoropropylene) (FEP) films was studied with respect to the influence of solvent. Particularly favorable grafting conditions with long radical lifetimes and reasonably high polymerization rates were achieved with solvents that are precipitants for the newly formed polystyrene, e.g., low‐molecular‐mass alcohols like ⁱPrOH, AcOH, their mixtures with H₂O, and H₂O/surfactant systems. Using one of these solvents significantly extended the range of accessible graft levels, and a specific degree of grafting was obtained at a much lower monomer concentration and irradiation dose than with grafting in a good solvent such as toluene. As practical consequences, the monomer was used more efficiently, and the radiation damage of the perfluorinated base material was reduced with the result of improved mechanical properties of the grafted films.     

Grafting copolymerization of N,N-dimethyacrylaminoethylmethacrylate (DMAEMA) onto preirradiated polypropylene films

Grafting copolymerization of dimethylaminoethylmethacrylate (DMAEMA) onto preirradiated polypropylene (PP) films was studied. PP samples were irradiated by electron beam in air. The effects of co-solvent system of ethanol/water (EtOH/H₂O), absorbed dose, monomer concentration, reaction time, and reaction temperature on the degree of grafting were determined. The grafted sample films were investigated by Fourier transform infrared (FTIR) spectroscopy in the attenuated total reflectance mode (ATR).     

Radiation‐assisted controlled grafting and reaction parameter optimization of an industrially important polyolefin elastomer (POE)

Controlled (low degree) grafting of a polar group to a non‐polar polymer or reverse is an important means to change the polarity of the base polymer, maintaining the properties of the polymer. In the present study, a polar monomer, methacrylic acid (MAA), was grafted onto three different types of “Engages” (a special type of polyolefin elastomer) in aqueous medium by gamma radiation. Grafting parameters (total dose, MAA concentration, and Mohr's salt concentration) were optimized for the desired amount of low‐degree grafting (less than 15 wt%). The grafting yields were measured gravimetrically. Pure and grafted Engages were characterized by Fourier transformed infrared spectroscopy, contact angle measurement, and scanning electron microscope. Fourier transformed infrared spectroscopy spectra confirmed the successful grafting of MAA onto the Engages. For all three, the best yields were found at 3‐kGy gamma radiation dose, 25‐vol% MAA, and 20‐mM Mohr's salt concentration. The grafting efficiencies follow a descending trend like Engage 8150 > Engage 7447 > Engage 8003. From contact angle measurement, it was seen that the hydrophilicities of all Engage surfaces were increased after grafting. Scanning electron microscope illustrated the best distribution of grafted MAA molecules to be on Engage 8150 surface followed by Engage 7447 and Engage 8003, respectively. The tensile testing results suggested that the mechanical properties of the base polymers remained almost unchanged after grafting. Thus, without detrimenting any basic properties, polyolefin elastomers can be grafted to achieve desired yield by an environmental‐friendly method, gamma radiation grafting, in aqueous media. Copyright © 2016 John Wiley & Sons, Ltd.     

Preparation and Antibacterial Function of Quaternary Ammonium Salts Grafted Cellulose Fiber Initiated by Fe2 +-H2O2 Redox

The surface contact disinfecting technique is a newly developed method for water sterilization. In this paper, the grafted quaternary ammonium salts (QAS) antibacterial fibers were prepared and designed to apply for the surface contact disinfecting process in water treatment. The antibacterial fibers were directly prepared by grafting methacryloxylethyl benzyl dimethyl ammonium chloride (DMAE-BC) onto cellulose fiber using thiocarbonate-H₂O₂ redox system. All kinds of factors in the grafting reactions, such as reaction time, reaction temperature, monomer concentration, initiator concentration, which influence the percentage of grafting, were studied and optimized. The modified cellulose fibers were characterized by Fourier transform infrared spectroscopy (FTIR) and scanning electron microscope(SEM). The effects of the percentage of grafting of the grafted cellulose fibers on bactericidal activity were also studied. The spread plate method was used to characterize the bactericidal activity. The disinfection process was further investigated by directly observing the morphology of the bacterial cells adsorbed on the antibacterial fibers with SEM and measuring extracelluar total protein concentration in suspension. The poly(DMAE-BC)-grafted cellulose ?ber was found to exhibit particularly high activity against E.coli.     

Gamma radiation induced graft copolymerization of acrylamide onto EPDM blended with PE

Gamma radiation induced grafting of acrylamide (AAm) onto vulcanized strips of EPDM and EPDM/PE blends has been carried out. The effects of different parameters on the graft yield have been investigated. These parameters include: radiation dose, monomer concentration, diluent composition and types of inhibitors. It has been found that water is the most appropriate solvent. The preswelling of crosslinked rubber samples in cyclohexane prior to grafting enhances the grafting and the addition of methanol to water as binary diluent in the ratio (1 : 1) decreases the graft yield. The presence of Mohr's salt and copper sulfate in the reaction mixture in the molar ratio (2.1 : 0.5) markedly increases the graft yield. Evidence of grafting have been conducted using thermal analysis as well as swelling measurements in water. Also, it has been found that the mechanical properties of the blends decrease at graft yield 13%. Copyright © 2002 John Wiley & Sons, Ltd.     

Optimization strategies for radiation induced grafting of 4-vinylpyridine onto poly(ethylene-co-tetraflouroethene) film using Box-Behnken design

The radiation induced grafting of 4-vinylpyridine (4-VP) onto poly(ethylene-co-tetrafluoroethene) (ETFE) was optimized using the Box-Behnken factorial design available in the response surface method (RSM). The optimized grafting parameters; absorbed dose, monomer concentration, grafting time and reaction temperature were varied in four levels to quantify their effect on the grafting yield (GY). The validity of the statistical model was supported by the small deviation between the predicted (GY=61%) and experimental (GY=57%) values. The optimum conditions for enhancing GY were determined at the following values: monomer concentration of 48 vol%, absorbed dose of 64 kGy, reaction time of 4 h and temperature of 68 °C. A comparison was made between the optimization model developed for the present grafting system and that for grafting of 1-vinylimidazole (1-VIm) onto ETFE to confirm the validly and reliability of the Box-Behnken for the optimization of various radiation induced grafting reactions. Fourier transform infrared (FTIR), thermogravimetric analysis (TGA) and X-ray diffraction (XRD) were used to investigate the properties of the obtained films and provide evidence for grafting.     

Grafting onto poly(vinyl alcohol). II. Graft copolymerization of methyl acrylate and vinyl acetate and their binary mixture using γ-rays as initiator

Methyl acrylate (MA), vinyl acetate (VAc) and their binary mixture (MA + VAc) have been graft copolymerized onto poly(vinyl alcohol) using γ-rays as initiator by mutual radiation method in aqueous medium. The optimum conditions for affording maximum grafting have been evaluated. The percentage of grafting has been determined as a function of total dose, concentrations of poly(vinyl alcohol), MA, VAc, and their binary mixture. Rate of grafting (R_p) and induction period (I_p) have been determined as a function of total initial mixed monomer concentration and concentration of poly(vinyl alcohol). The graft copolymer has been characterized by thermogravimetric method. The effect of donor monomer (vinyl acetate) on percent grafting of acceptor monomer (methyl acrylate) has been explained.     

Kinetics of diffusion-free radiation graft polymerization of styrene onto polyethylene

The diffusion-free radiation graft polymerization of styrene onto polyethylene has been studied. The grafting rate shows a dependence on monomer which is far different than what has been assumed. Further, the dependence on monomer changes with increasing dose rate as does the dependence of grafting rate on radiation dose rate. Three different regions of behavior are defined: (1) a region of low dose rate where the grafting rate is 1/2-order in dose rate and 3/2-order in monomer; (2) a region of intermediate dose rate where the grafting rate is intermediate between 1/2-and zero-order in dose rate and 5/2-order in monomer; and (3) a region of high dose rate, where the grafting rate is independent of dose rate and at least 5/2-order in monomer. Various possible mechanisms responsible for these effects are discussed, including the effects of viscosity on the initiation and termination reactions, the possibility of ionic graft polymerization, and energy transfer.     

Application of radiochromic gel detector (FXG) for UVA dose measurements

Tissue equivalent radiochromic gel material containing ferrous ions, xylenol-orange ion indicator and gelatin as gelling agent (FXG) is known to be sensitive to γ- and X-rays; hence it has been used for ionizing radiation dosimetry. Changes in optical absorbance properties of FXG material over a wide region in the visible spectrum were found to be proportional to the radiation absorbed dose. An earlier study demonstrated the sensitivity of FXG gel detector to ultraviolet radiation and therefore that could give quantitative measure for UV exposure. This study focuses on the detection of UVA radiation (315–400 nm), which forms an important part (～97%) of the natural solar UV radiation reaching the earth surface. A solar UV simulator device was used to deliver UVA radiation to FXG samples. The beam was optically modified to irradiate gel samples at an exposure level about 58 W/m², which is comparable to the summer natural UVA radiation measured outside the laboratory building at midday (～60 W/m²). Experimental results were used to generate mathematical second order formulas that give the relationship between UVA dose and optical absorbance changes observed at two wavelengths in the visible region of the spectrum—430 and 560 nm.     

Radiation-induced grafting of acrylamide onto guar gum in aqueous medium: Synthesis and characterization of grafted polymer guar-g-acrylamide

Mutual radiation grafting technique has been applied to carry out grafting of acrylamide (AAm) onto guar gum (GG) using high-energy Co⁶⁰ γ radiation to enhance its flocculating properties for industrial effluents. The grafted product was characterized using analytical probes like elemental analysis, thermal analysis, Fourier transformed infrared (FTIR), X-ray diffraction (XRD) and scanning electron microscope (SEM). The grafting extent was observed to decrease with the dose rate and increase with the concentration of AAm. Thermo gravimetric analysis (TGA) of grafted and ungrafted samples indicated better stability of grafted product. γ and microwave radiation effect on grafted and virgin GG has also been reported.     

Spectroscopic study of the penetration depth of grafted polystyrene onto poly(tetrafluoroethylene‐co‐perfluoropropylvinylether) substrates. 1. Effect of grafting conditions

This study concerns the radiation grafting of styrene onto poly(tetrafluoroethylene‐co‐perfluoropropylvinylether) (PFA) substrates and the penetration depth of the graft. Grafting was obtained by the simultaneous irradiation method, and the spectroscopic analysis was made with the micro‐Raman technique. Effects of grafting conditions such as the type of solvent, dose rate, and irradiation dose on the grafting yield were investigated. Of the different solvents used, the most efficient in terms of increasing grafting yield were dichloromethane, benzene, and methanol, respectively. A mixture of methanol and dichloromethane used as a solvent for styrene achieved a higher degree of grafting and concentration of grafted polystyrene onto the surface of PFA substrates than solutions of the monomer in the separate solvents. The degree of grafting increased with increasing radiation dose up to 500 kGy, stabilizing above this dose. However, the grafting yield decreased with an increase in the dose rate. The increase in the overall grafting yield was accompanied by a proportional increase in the penetration depth of the grafts into the substrate. © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 3191–3199, 2002     

Some composting and biodegradation effects of physically or chemically crosslinked poly(lactic acid)

Polylactide (PLA) crosslinked by using both triallyl isocyanurate (TAIC) and electron radiation or using dicumyl peroxide (DCP) was studied with the aim of examining the behaviour of the modified polymer under various environmental conditions. Thus, the polymer samples were subjected to composting in an industrial pile, exposed to proteinase K, or incubated in sea water. The number-average molecular weight (M_n), melt flow index (MFI), crystallinity (χ), tensile strength (σ_M) and mass loss (in the case of samples treated with proteinase K) were determined. It was found that neat PLA irradiated with high-energy electrons underwent degradation that increased during composting. As a result, the value of M_n of this polymer dramatically decreased. It appeared that PLA crosslinked with TAIC and electron radiation contained, in addition to the crosslinked phase, a phase strongly degraded by this radiation, which facilitated hydrolytic degradation during composting. The σ_M value of PLA crosslinked with TAIC and electron radiation rapidly decreased during composting, whereas that of PLA crosslinked chemically and composted for three weeks slightly increased. As the electron radiation dose increased, the mass loss of PLA containing TAIC and treated with proteinase K decreased, which indicated that the physical crosslinking of PLA hindered enzymatic degradation of this polymer. Important changes in both neat and physically crosslinked PLA incubated in sea water for nine weeks were not detected.