Fabrication, characterisation and voltammetric studies of gold amalgam nanoparticle modified electrodes.

The tabrication, characterisation, and electroanalytical application of gold and gold amalgam nanoparticles on glassy carbon electrodes is examined. Once the deposition parameters for gold nanoparticle electrodes were optimised, the analytical utility of the electrodes was examined in CrIII electroanalysis. It was found that gold nanoparticle modified (Au-NM) electrodes possess higher sensitivity than gold macroelectrodes. In addition, gold amalgam nanoparticle modified (AuHg-NM) electrodes were fabricated and characterised. The response of those electrodes was recorded in the presence of important environmental analytes (heavy metal cations). It was found AuHg-NM electrodes demonstrate a unique voltammetric behaviour and can be applied for electroanalysis when enhanced sensitivity is crucial.     

Ruthenium and ruthenium dioxide-modified graphite-ethylene/propylene/diene and graphite-Teflon composite electrodes as amperometric flow detectors. Application to the determination of methionine

The flow injection amperometric performance of solid composite graphite electrodes with ethylene/propylene/diene (EPD) or Teflon as binding agents, and with Ru or RuO2 particles as electrocatalytic modifiers has been compared. Both, Ru and RuO2 modified electrodes exhibited electrocatalytic properties on the methionine oxidation process in alkaline media. The electrodes composition and the hydrodynamic and chemical variables were optimized. Graphite-EPD (GEPD) electrodes showed a better analytical performance than graphite-Teflon (GPTFE) electrodes. Furthermore, a better sensitivity, repeatability and reproducibility was observed for RuO2-GEPD electrodes when compared with Ru-GEPD electrodes. At an applied potential of +0.50 V, a detection limit for methionine of 4.8x10(-5) mol L(-1), similar to those reported in the literature for other RuO2-modified electrodes, was obtained. The analytical applicability of RuO2-GEPD electrodes was demonstrated by determining methionine in a complex pharmaceutical formulation.     

A transflective blue-phase liquid crystal display with alternate electrodes

A transflective polymer-stabilised blue-phase liquid crystal display (BP-LCD) with alternate electrodes is proposed. The alternate electrodes are composed of right triangle electrodes and slanted electrodes. To balance the optical phase retardation between the transmissive (T) and reflective (R) regions, the legs of the right triangle electrodes in the T region generate uniform horizontal electric field, the hypotenuses of the right triangle electrodes and slanted electrodes in the R region generate uniform oblique electric field. As result, the T and R regions obtain the same optical phase retardation. This display exhibits reasonably high transmittance, low operating voltage, wide viewing angle and well-matched voltage-dependent transmittance and reflectance curves.     

聚萘二胺修饰电极对痕量物质的检测

综述了聚萘二胺修饰铂电极、玻碳电极和碳糊电极用于检测痕量银离子、铅离子、亚硝酸根及硝酸根阴离子、过氧化氢、葡萄糖和胆甾醇等方面的研究成果，列举了这些电极的优异探测性能，并指出该类电极有望发展成为性能优异的检测电极和传感器。引用文献14篇。     

New conventional coated-wire ion-selective electrodes for flow-injection potentiometric determination of chlordiazepoxide.

New chlordiazepoxide hydrochloride (Ch-Cl) ion-selective electrodes (conventional type) based on ion associates, chlordiazepoxidium-phosphomolybdate (I) and chlordiazepoxidium-phosphotungstate (II), were prepared. The electrodes exhibited mean slopes of calibration graphs of 59.4 mV and 60.8 mV per decade of (Ch-Cl) concentration at 25 degrees C for electrodes (I) and (II), respectively. Both electrodes could be used within the concentration range 3.16 x 10(-6)-1 x 10(-2) M (Ch-Cl) within the pH range 2.0-4.5. The standard electrode potentials were determined at different temperatures and used to calculate the isothermal coefficients of the electrodes, which were 0.00139 and 0.00093 V degrees C(-1) for electrodes (I) and (II), respectively. The electrodes showed a very good selectivity for Ch-Cl with respect to the number of inorganic cations, amino acids and sugars. The electrodes were applied to the potentiometric determination of the chlordiazepoxide ion and its pharmaceutical preparation under batch and flow injection conditions. Also, chlordiazepoxide was determined by conductimetric titrations. Graphite, copper and silver coated wires were prepared and characterized as sensors for the drug under investigation.     

Floating electrode dielectrophoresis

In practice, dielectrophoresis (DEP) devices are based on micropatterned electrodes. When subjected to applied voltages, the electrodes generate nonuniform electric fields that are necessary for the DEP manipulation of particles. In this study, electrically floating electrodes are used in DEP devices. It is demonstrated that effective DEP forces can be achieved by using floating electrodes. Additionally, DEP forces generated by floating electrodes are different from DEP forces generated by excited electrodes. The floating electrodes' capabilities are explained theoretically by calculating the electric field gradients and demonstrated experimentally by using test-devices. The test-devices show that floating electrodes can be used to collect erythrocytes (red blood cells). DEP devices which contain many floating electrodes ought to have fewer connections to external signal sources. Therefore, the use of floating electrodes may considerably facilitate the fabrication and operation of DEP devices. It can also reduce device dimensions. However, the key point is that DEP devices can integrate excited electrodes fabricated by microtechnology processes and floating electrodes fabricated by nanotechnology processes. Such integration is expected to promote the use of DEP devices in the manipulation of nanoparticles.     

Amineptine Plastic Membrane Electrode Based on its Ion Associate with Tetraphenylborate and Phosphomolybdic Acid

New amineptine hydrochloride (Am-Cl) ion-selective electrodes (conventional type) based on amineptinium-tetraphenylborate (I) and amineptinium-phosphomolybdate (II) were prepared. The electrodes exhibited mean slopes of calibration graphs of 57.9?mV and 53.8?mV per decade of (Am-Cl) concentration at 25?°C for electrodes (I) and (II), respectively. The electrodes can be used within the concentration range 3.16×10^?5?10^?2?M (Am-Cl) at a pH range of 2.0–3.9 for both electrodes. The standard electrode potentials were determined at different temperatures and used to calculate the isothermal coefficients of the electrodes, which were 0.00172?V?°C^?1 and 0.00091 V?°C^?1 for (I) and (II) electrodes, respectively. The electrodes showed a very good selectivity for (Am-Cl) with respect to a number of inorganic cations and sugars. The standard addition method is successfully applied to determine (Am-Cl) in pure solutions and in amineptine-containing tablets.     

Disposable Injection‐Moulded Cell‐on‐a‐Chip Microfluidic Devices with Integrated Conducting Polymer Electrodes for On‐Line Voltammetric and Electrochemiluminescence Detection

This work reports the construction and characterization of plastic electrochemical micro‐flow‐cells with integrated injection‐moulded polymer electrodes. The three electrodes (working, auxiliary, and reference) were fabricated by injection‐moulding from a conducting grade of polystyrene loaded with carbon fibers. On‐chip reference electrodes were prepared by coating one of the conducting polymer electrodes with a Ag/AgCl layer (implemented either by e‐beam evaporation of Ag followed by electrochemical formation of AgCl or by applying a Ag/AgCl paste). Working electrodes were either polymer electrodes coated with Au by e‐beam evaporation or bare conducting polymer electrodes. The electrodes were integrated into the micro‐flow‐cells by an over‐moulding process followed by ultrasonic welding. The devices were characterized by optical and electrochemical techniques. Studies by cyclic voltammetry (CV), anodic stripping voltammetry (ASV) and electrochemiluminescence (ECL) demonstrate ‘proof–of‐principle’ of the micro‐flow‐cells as electrochemical sensors.     

ITO-free transparent conductive films based on carbon nanomaterials with metal grid for liquid crystal displays

Carbon nanomaterials with metal grids were used as transparent conductive electrodes for liquid crystal displays (LCDs) to develop an indium tin oxide (ITO)-free device. We prepared LCDs with CNTs and graphene electrodes; however, the working voltage of the device with the CNT electrodes was high. The device with graphene electrodes had good performance, but not as good as devices with ITO electrodes. To improve the device performance, we applied a metal grid to the carbon nanomaterial to create low sheet-resistance transparent electrodes. The device with the graphene and metal grid transparent electrodes had a threshold voltage as low as 0.23 V/µm, which is similar to that of typical LCDs with ITO electrodes. The results show that a hybrid transparent conductive film with graphene and metal grid could be an alternative to ITO for developing ITO-free LCDs.     

Use of disposable gold working electrodes for cation chromatography-integrated pulsed amperometric detection of sulfur-containing amino acids

We have prepared disposable thin-film gold working electrodes on polymeric substrates. Our microfabrication process allows for inexpensive and reproducible mass production of such electrodes. We utilize this new type of electrode in flow-through electrochemical cells to replace the conventional non-disposable gold working electrodes for integrated pulsed amperometric detection (IPAD) of compounds separated by high-performance cation-exchange chromatography. Using two S-containing amino acids (homocysteine and cysteine) as test compounds, we have modified a previously reported waveform for optimum performance with disposable gold electrodes. With the help of the same two test substances we have characterized the analytical performance of disposable gold electrodes under the new conditions. Compared to non-disposable working electrodes, the disposable working electrodes generated equal or better results in the limit of detection, linearity of calibration and reproducibility. When used with a new IPAD waveform, the disposable electrodes functioned reproducibly for 3 days. At the end of the specified usage period of 3 days, the disposable electrodes are simply replaced. Reconditioning by polishing is thus no longer required.     

Behaviour of electrodes modified with poly(naphthoquinone)films: Electrocatalytic effect in the reduction of oxygen

Stable (polynaphthoquinone)-coated Pt, Au and graphite electrodes are prepared by electropolymerization. Stable poly(naphthoquinone)-coated Pt, Au and graphite electrodes are prepared by electropolymerization. These modified electrodes catalyse oxygen reduction. Rotating-disk studies in the case of modified Pt electrodes show that the rate-limiting factors are the substrate diffusion in the film and the cross-exchange reaction.     

All-solid-state planar miniature ion-selective chloride electrode

All-solid-state ion-selective electrodes with plastic membrane (poly(vinyl chloride) (PVC), bis(2-ethylhexyl) sebacate (DOS), methyltri-n-tetradecylammonium chloride (MTTACl)), a conducting poly(pyrrole) (PPy) film doped either with chloride ions (PPyCl) or hexacyanoferrate(II) ions (PPyFeCN), and glassy carbon (GC) or screen-printed graphite layer (S-PG) as an inner electric contact were investigated. All the electrodes show close to Nernstian response, but their lifetimes vary. The at least 2-months lifetime of screen-printed electrodes is only achieved for the electrodes containing PPyFeCN (cation-exchanging film). Shorter lifetime of other screen-printed electrodes, i.e. without PPy, or with PPyCl (anion-exchanging film), was attributed to the diffusion of anionic products of the hydrolysis of organic components of the graphite paste used to prepare the electric contact. The properties of miniature, screen-printed electrodes comprising PPyFeCN solid contact, were comparable to those ion-selective electrodes with PPy solid contact (regardless the ion-exchanging characteristic of the polymer) deposited on GC electric contact.     

Hydrogel-based flexible micro-reference electrodes for use in alkaline and neutral pH solutions

Two types of nonbreakable, flexible micro-reference electrodes filled with gel-electrolytes were prepared for use in solutions with alkaline and neutral pH. The electrodes are intended for electrochemical measurements, in which chloride-free conditions are important. Due to the flexible, bendable construction of the electrodes, electrochemical experiments at locations difficult to access with common reference electrodes are enabled. Hg|HgO-type electrodes were prepared from amalgamated Au wires, followed by oxidation of the amalgam, which is mounted in a PTFE tube filled with 0.1M NaOH solution immobilized in a PAA-g-PEO gel. The potential of this type of electrode was found to be 0.162?±?0.002 V (SHE) at room temperature. Cu|CuSO₄ electrodes, consisting of a Cu wire immersed in a saturated CuSO₄ solution jellied with gelatin, showed a stable open-circuit potential of 0.312?±?0.001 V (SHE). Further characterization of the electrodes was performed in terms of electrochemical impedance spectroscopy and micro-polarization measurements. As an alternative to the flexible electrodes, rigid electrodes in glass enclosure were fabricated in analogy to the flexible-type electrodes.     

Potentiometric sensor for hydrogen ion based on N,N'-dialkylbenzylethylenediamine neutral carrier in a poly(vinyl chloride) membrane with polyaniline solid contact

Hydrogen ion selective solid contact electrodes based on N,N'-dialkylbenzylethylenediamine (alkyl=butyl, hexyl, octy, decyl) are prepared. Solid contact electrodes and coated wire electrodes have been fabricated from polymer cocktail solutions based on N,N'-dialkylbenzylethylenediamine (alkyl=butyl, hexyl, octy, decyl). We showed that the response range and slopes are influenced by the alkyl chain length. Response ranges and Nernstian slops for solid contact electrodes were slightly better than for coated wire electrodes. Solid contact electrodes were shown linear selective to hydrogen ion in the pH ranges pH 4.5-13.0, 4.2-13.1, 3.4-13.0 and 3.0-13.2. and their Nernstian slopes were 49.7, 50.8, 51.5 and 53.7 mV pH(-1) at 20+/-0.2 degrees C, respectively. Stability is also improved especially when compared with coated wire electrodes. The 90% response time was <2 s and their electrical resistance varied in the range 2.37-2.76 MOmega. Especially solid contact electrodes with N,N'-didecylbenzylethylenediamine have shown the best selectivity and reproducibility of e.m.f..     

Single‐Wall Carbon Nanotube Paste Electrodes: a Comparison with Carbon Paste,Platinum and Glassy Carbon Electrodes via Cyclic Voltammetric Data

A new carbon electrode material, obtained by mixing single wall carbon nanotubes (SWNTs) with a mineral oil binder is studied. Carbon nanotube pastes show the special properties of carbon nanotubes combined with the various advantages of composite electrodes such as a very low capacitance (background current) and the possibility of an easy preparation, modification and renewal. A better knowledge of the characteristics of electrode reactions at carbon nanotube paste (CNTP) electrodes was obtained studying the electron transfer rates of various redox couples under different pretreatment conditions. A critical comparison with carbon paste (CP), platinum (Pt) and glassy carbon (GC) electrodes was also carried out. Capacitance and resistance values were also calculated for all electrodes investigated. Both untreated and treated CNTP electrodes showed a low resistance while the capacitance was markedly reduced with CNTP electrodes previously treated with concentrated nitric acid. An electrochemical pretreatment on CNTP electrodes was developed which showed an excellent result towards two‐electron quinonic structure species. After this treatment the heterogeneous standard rate constants for p‐methylaminophenol sulfate (MAP) and dopamine resulted to be significantly higher (2.1×10^?2 cm/s and 2.0×10^?2 cm/s, respectively) than those obtained with the other electrodes studied. Reproducibility, stability and storage characteristics of CNTP electrodes were also reported.     

银电极在电化学分析研究中的应用

银电极（包括裸银电极、修饰银电极）因其特有的物理化学性质和电化学性能,被广泛用于伏安分析、光谱／波谱电化学和压电传感器等电化学分析领域。本文对某在这些领域中的研究和应用进行了综述,引用文献一百余篇。     

Properties of octadecylsilyl-coated electrodes in ionic micellar solutions

Cyclic voltammetry of ferrocene, hexaammineruthenium(III) and hexacyanoferrate(II) in micellar solution sof sodium dodecyl sulfate (SDS) and cetyltrimethylammonium bromide (CTAB) was studied at platinum and pyrolytic graphite electrodes treated with octadecyltrichlorosilane. The charge-transfer rates and surface spectra were consistent with near monolayer coverage of the electrodes with an octadecylsilyl (ODS) layer bound to the surface through SiOgroups. Both SDS and CTAB were detected by x-ray photoelectron spectroscopy on ODS-coated electrodes treated with micellar solutions. Compared with bare electrodes, the signal-to-noise ratio and reproducibility were better on ODS electrodes, which were stable when stored in air. Some control over electrochemical selectivity and reversibility was achieved with ODS-coated electrodes in ionic micellar solutions. For surfactant and electroactive ions of the same charge sign, significant inhibition to charge transfer was found. Ions of opposite charge from the surfactant had enhanced charge-transfer rates. The results are qualitatively consistent with the kinetic effects of an adsorbed layer of ionic surfactant on the ODS electrodes.     

Preparation and Supercapacitive Performance of Lead Dioxide Electrodes with Three-Dimensional Porous Structure

The three-dimensional porous structure PbO₂ electrodes (3D-PbO₂ electrodes) were prepared in the lead nitrate solution by potentiostatically electrodeposition method using oxygen bubble as dynamic template, which can be used as the positive materials of the supercapacitors. The morphology and structure of 3D-PbO₂ electrodes were characterized by scanning electron microscope (SEM) and X-ray diffraction (XRD). The supercapacitive performance of 3D-PbO₂ electrodes were investigated by cyclic voltammetry (CV), galvanostatic charge-discharge tests (GCD) and electrochemical impedance spectroscopy (EIS). The specific capacitance of 3D-PbO₂ electrodes can reach 195.6 F g^–1 at 0.2 A g^–1, which is 2.8 times higher than that of Flat-PbO₂ electrodes (68.8 F g^–1). The charge transfer resistance (R_ct) of 3D-PbO₂ electrodes (8.21 Ohm cm^–2) is lower than that of Flat-PbO₂ electrodes (21.32 Ohm cm^–2). The excellent supercapacitive performance of 3D-PbO₂ electrodes can be attributed to the three-dimensional porous structure, which can enlarge the active surface area of lead dioxide electrodes and promote the electrolyte diffusion and electrons propagation.     

Low Cost Layer by Layer Construction of CNT/Chitosan Flexible Paper‐based Electrodes: A Versatile Electrochemical Platform for Point of Care and Point of Need Testing

Modification of cellulosic paper with carbon nanotubes (CNT) was studied for the development of electronic and analytical devices. Interesting results were published by using a CNT aqueous solution and the capillary forces of filter paper to make conductive tracks, supercapacitors, potentiometric electrodes and chemometric sensors. In this report, we show for the first time an electrochemical characterization of CNT‐CS‐SDS paper electrodes constructed with an ink containing optimized proportions of multi‐wall CNT, chitosan (CS) and sodium dodecyl sulfate (SDS), and we compared our data with CNT‐SDS paper electrodes constructed with a previously reported ink. We achieved better reversibility (ΔE=131±14 mV, CVs) and reproducibility (RSD=3.63 %) with CNT‐CS‐SDS paper electrodes, when compared to CNT‐SDS paper electrodes (ΔE=249±7 mV; RSD=6.8 %) used as controls. When electrodes were fold at 90° angle, CNT‐CS‐SDS paper electrodes showed lower RSD than CNT‐SDS paper electrodes, 8.43 % and 21.5 % respectively. These results are in concordance with SEM analysis indicating a dense CS film in CNT‐CS‐SDS paper electrodes. As a proof of concept, we determine dopamine concentration by DPV in the presence of ascorbic and uric acids, the limit of detection calculated was 6.32 μM. Moreover, a bismuth‐film was prepared by in situ plating of Bi into CNT‐CS‐SDS paper electrodes. ASV allowed us to detect Pb in the presence of Bi (10–200 ppb) with a limit of detection of 6.74 ppb.     

酒石酸修饰电极及其铜的溶出伏安法研究

本文研究了酒石酸修饰电极的制作,讨论了铜在酒石酸修饰电极上的反应机理,并确定了痕量铜的阳极溶出伏安法测定条件。