Electron and positron elastic scattering in gaseous and liquid water: A comparative study

In the present work, we present both theoretical differential and total cross sections for the elastic scattering process of positrons and electrons in liquid and vapour water for energies ranging from 10 eV to 10 keV. The calculations are performed in the partial-wave formalism by means of a complex interaction potential taking into account static potential as well as fine effects like exchange and polarization contributions. The theoretical results obtained in this free-parameter quantum-mechanical treatment are compared to available experimental data and good agreement is generally observed. Moreover, quantitative differences are reported between the positron and electron scattering, in vapour as well as in liquid water.     

Density measurements of liquid 2-propanol at temperatures between (280 and 393) K and at pressures up to 10 MPa

Liquid densities for 2-propanol have been measured at T = (280, 300, 325, 350, 375, and 393) K from about atmospheric pressure up to 10 MPa using a vibrating tube densimeter. The period of vibration has been converted into density using the Forced Path Mechanical Calibration method. The R134a has been used as reference fluid for T ? 350 K and water for T > 350 K. The uncertainty of the measurements is lower than ±0.05%. The measured liquid densities have been correlated with a Starling BWR equation with an overall AAD of 0.025%. The same BWR equation agrees within an AAD lower than 0.2% with the experimental values available in the literature over the same temperature and pressure range.     

Solubility of fragrance raw materials in water: Experimental study,correlations, and Mod. UNIFAC (Do) predictions

The (liquid + liquid) and (solid + liquid) phase equilibria of nine binary mixtures containing fragrance raw materials (FRM) such as aliphatic ketones and compounds based on cyclohexane with water were investigated. The systems {2-heptanone, or 2-nonanone, or 2-undecanone, or 2-tridecanone, or cyclohexyl carboxylic acid (CCA), or cyclohexyl acetic acid (CAA), or 2-cyclohexyl ethanol (2CE) or cyclohexyl acetate (CA), or 2-cyclohexyl ethyl acetate (2CEA) + water (2)} have been measured by a dynamic method in wide range of temperatures from (290 to 360) K and ambient pressure. For all systems immiscibility in the liquid phase was detected. The experimental data was correlated by means of the NRTL equation, utilizing parameters derived from the (liquid + liquid) equilibrium. Additionally, the binary mixtures were predicted with the Mod. UNIFAC (Do) model, with known from literature parameters, with very good results.     

Isobaric (vapour + liquid) equilibria for the (1-propanol + 1-butanol) binary mixture at (53.3 and 91.3) kPa

In this work, isobaric (vapour + liquid) equilibrium data have been determined at (53.3 and 91.3) kPa for the binary mixtures of (1-propanol + 1-butanol). The thermodynamic consistency of the experimental values was checked by means the traditional area test and the direct test methods. According to the criteria for the test methods, the (vapour + liquid) equilibrium results were found to be thermodynamically consistent. The experimental values obtained were correlated by using the van Laar, Margules, Wilson, NRTL, and UNIQUAC activity-coefficient models. The binary interaction parameters of the activity-coefficient models have been determined and reported. They have been compared with those calculated by the activity-coefficient models. The average absolute deviation in boiling point and vapour-phase composition were determined. The calculated maximum average absolute deviations were 0.86 K and 0.0151 for the boiling point and vapour-phase composition, respectively. Therefore, it was shown that the activity-coefficient models used satisfactorily correlate the (vapour + liquid) equilibrium results of the mixture studied. However, the performance of the UNIQUAC model was superior to all other models mentioned.     

Solubility of CO2 in the ionic liquid [hmim][Tf2N]

New experimental results are presented for the total pressure above liquid mixtures of carbon dioxide and the ionic liquid 1-hexyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide ([hmim][Tf₂N]). The series of experiments were performed at preset temperature and liquid phase composition by means of a very precise high-pressure view-cell technique based on the synthetic method. A temperature range from (293.15 to 413.2) K was investigated where the maximum pressure reached approximately 10 MPa. Gas molalities in [hmim][Tf₂N] ranged up to about 4.7 mol · kg⁻¹. The (extended) Henry’s law is successfully applied to correlate the solubility pressures.     

Vapor pressures,excess enthalpies,and specific heat capacities of the binary working pairs containing the ionic liquid 1-ethyl-3-methylimidazolium dimethylphosphate

In present research the binary solutions containing ionic liquid (IL), 1-ethyl-3-methylimidazolium dimethylphosphate ([EMIM] [DMP]), are considered as new working pairs for absorption heat pumps or absorption refrigerators. The IL was synthesized in the lab and mixed with water, ethanol, or methanol. Experimental (vapor + liquid) equilibrium (VLE) of these binary systems was measured at different mole fractions ranging from 0.1 to 0.5 and was correlated by the NRTL equation within the average relative deviation of 2%, which means that the (vapor + liquid) equilibrium of these binary solutions containing ionic liquid can be predicted by traditional non-electrolyte solution model. Meanwhile these binary solutions are a negative deviation from Raoult’s law. Excess enthalpy of these binary systems was measured at the temperature of T = 298.15 K and at the pressure of 1 atm. The results indicate that the mixing processes of [EMIM] [DMP] with water, ethanol, or methanol are exothermal, which is a very important characteristic for working pairs used in absorption heat pumps or in absorption refrigerators.     

Thermodynamic optimization of the (Na2O + SiO2 + NaF + SiF4) reciprocal system using the Modified Quasichemical Model in the Quadruplet Approximation

All available thermodynamic and phase diagram data for the condensed phases of the ternary reciprocal system (NaF + SiF₄ + Na₂O + SiO₂) have been critically assessed. Model parameters for the unary (SiF₄), the binary systems and the ternary reciprocal system have been found, which permit to reproduce the most reliable experimental data. The Modified Quasichemical Model in the Quadruplet Approximation was used for the oxyfluoride liquid solution, which exhibits strong first-nearest-neighbor and second-nearest-neighbor short-range ordering. This thermodynamic model takes into account both types of short-range ordering as well as the coupling between them. Model parameters have been estimated for the hypothetical high-temperature liquid SiF₄.     

Phase equilibria study of the binary systems (1-butyl-3-methylimidazolium tosylate ionic liquid + water,or organic solvent)

(Solid + liquid) phase equilibria (SLE) and (liquid + liquid) phase equilibria (LLE) for the binary systems: ionic liquid (IL) 1-butyl-3-methylimidazolim tosylate (p-toluenesulfonate) {[BMIM][TOS] + water, an alcohol (ethanol, or 1-butanol, or 1-hexanol, or 1-octanol, or 1-decanol), or n-hexane, or an aromatic hydrocarbons (benzene, or toluene, or ethylbenzene, or propylbenzene, or thiophene)} have been determined at ambient pressure. A dynamic method was used over a broad range of mole fractions and temperatures from (230 to 340) K. For the binary systems containing water, or an alcohol, simple eutectic diagrams were observed with complete miscibility in the liquid phase. As usual, with increasing chain length of the alcohol the solubility decreases. In the case of mixtures {IL + n-hexane, or benzene, or alkylbenzene, or thiophene} the eutectic systems with mutual immiscibility in the liquid phase with an upper critical solution temperature (UCST) were detected. The basic thermal properties of the pure IL, i.e. melting and glass-transition temperatures, as well as the enthalpy of fusion have been measured using a differential scanning microcalorimetry technique (DSC). Density at high temperatures was determined and extrapolated to 298.15 K. Well-known UNIQUAC, Wilson and NRTL equations have been used to correlate experimental SLE data sets for alcohols and water. For the systems containing immiscibility gaps {IL + n-hexane, or benzene, or alkylbenzene, or thiophene}, parameters of the LLE correlation equation have been derived using only the NRTL equation.     

Phase equilibrium data for the ternary system (propane + chloroform + oryzanol)

The compound oryzanol available in the rice bran (oriza sativa) is well known for its antioxidant activity. Phase equilibrium data involving oryzanol in compressed fluids, hardly found in the literature, are important to provide the basis for the extraction and fractionation processes. In this sense, the aim of this work is to report phase equilibrium measurements for the system (γ-oryzanol + chloroform) in compressed propane. Phase equilibrium experiments were performed using the static synthetic method (cloud points transition data) in a high-pressure variable-volume view cell in the temperature range of 303 K to 353 K, pressures up to 17 MPa, for oryzanol overall mass fractions of 2 wt%, 5 wt% and 10 wt% in (propane + chloroform) mixtures. A complex phase behaviour comprising vapour–liquid, liquid–liquid, vapour–liquid–liquid, solid–liquid, solid–liquid–liquid, solid–liquid–liquid–vapour transitions were visually observed for the system studied.     

Ionic liquids as entrainers for water + ethanol,water + 2-propanol,and water + THF systems: A quantum chemical approach

Ionic liquids (ILs) are used as entrainers in azeotropic systems such as water + ethanol, water + 2-propanol, and water + tetrahydrofuran (THF). Ionic liquids consisting of a cation and an anion has limitless combinations, thereby making experimentation expensive and time taking. For the prediction of the liquid phase nonidealities resulting from molecular interactions, “COnductor-like Screening MOdel for Real Solvents” (COSMO-RS) approach is used in this work for the screening of potential ionic liquids. Initially benchmarking has been done on 12 reported isobaric IL based ternary systems with an absolute average deviation of 4.63% in vapor phase mole fraction and 1.07% in temperature. After successful benchmarking, ternary vapor + liquid equilibria for the azeotropic mixture of (a) ethanol + water, (b) 2-propanol + water, and (c) THF + water with combinations involving 10 cations (imidazolium, pyridinium, quinolium) and 24 anions were predicted. The VLE prediction, which gave the relative volatility, showed that the imidazolium based ionic liquid were the best entrainer for the separation of the three systems at their azeotropic point. ILs with [MMIM] cation in combination with acetate [OAc], chloride [Cl], and bromide [Br] anion gave the highest relative volatility.     

Pyrolysis of cohesive meat and bone meal in a bubbling fluidized bed with an intermittent solid slug feeder

Meat and bone meal (MBM) is a mass-produced by-product of the meat rendering industry. It has great potential as a feedstock for the production of bio-fuels. Meat and bone meal, however, is a highly cohesive and temperature sensitive material and has traditionally been found to be very difficult, if not impossible, to feed properly into pyrolysis reactors or bubbling fluidized beds. This study showcases an application of the ICFAR intermittent solid slug feeder technology and its capability of successfully feeding the MBM regularly at an average feeding rate of 0.34 g/s into the reactor.A highly automated and instrumented fast pyrolysis pilot plant has been used to process meat and bone meal residues and to operate within a wide range of temperatures (450–600 °C). This is the first study dealing with the pyrolysis of pure meat and bone meal at various operating conditions continuously fed into a laboratory-scale fluidized bed reactor. All liquid and solid products have been analyzed (yields, HHV, GC–MS, elemental analysis, and ash mineral analysis). The homogenous bio-oil produced is an attractive fuel with a significant high heating value (HHV) of 31.5 MJ/kg and an average liquid yield of 43 wt% at 550 °C. The highest water-free HHV (36.7 MJ/kg) was found at 500 °C, with a liquid yield of 35 wt% at this temperature. The optimized pyrolysis temperature, at which the heat from the gas combustion can provide the heat required for processing MBM, while maximizing the bio-oil liquid yield and process energy yield, is 550 °C. Under these conditions, the pyrolysis process energy yield is 91%.The study also demonstrates a new technique to accurately determine the heat of pyrolysis reaction energy required by the process, using a non-invasive water calibration method.     

Phase equilibrium study of the binary systems (N-hexyl-3-methylpyridinium tosylate ionic liquid + water,or organic solvent)

The (solid + liquid) phase equilibrium (SLE) and (liquid + liquid) phase equilibrium (LLE) for the binary systems ionic liquid (IL) N-hexyl-3-methylpyridinium tosylate (p-toluenesulfonate), {([HM³Py][TOS] + water, or an alcohol (1-butanol, or 1-hexanol, or 1-octanol, or 1-decanol), or an aromatic hydrocarbon (benzene, toluene, or ethylbenzene, or propylbenzene), or an alkane (n-hexane, n-heptane, n-octane)} have been determined at ambient pressure using a dynamic method. Simple eutectic systems with complete miscibility in the liquid phase were observed for the systems involving water and alcohols. The phase equilibrium diagrams of IL and aromatic or aliphatic hydrocarbons exhibit eutectic systems with immiscibility in the liquid phase with an upper critical solution temperature as for most of the ILs. The correlation of the experimental data has been carried out using the UNIQUAC, Wilson and the non-random two liquid (NRTL) correlation equations. The results reported here have been compared with analogous phase diagrams reported by our group previously for systems containing the tosylate-based ILs.     

The buffering-out effect and phase separation in aqueous solutions of EPPS buffer with 1-propanol, 2-propanol,or 2-methyl-2-propanol at T = 298.15 K

Buffering-out is a new liquid–liquid phase separation phenomenon observed in mixtures containing a buffer as a mass separating agent. The (liquid + liquid) equilibrium (LLE) and (solid + liquid + liquid) equilibrium (SLLE) data were measured for the ternary systems {3-[4-(2-hydroxyethyl)piperazin-1-yl]propanesulfonic acid (EPPS) buffer + 1-propanol, 2-propanol, or 2-methyl-2-propanol + water} at T = 298.15 K under atmospheric pressure. The phase boundary data were fitted to an empirical equation relating to the concentrations of organic solvent and buffer. The effective excluded volume (EEV) values of EPPS were obtained from the phase boundary data. The phase-separation abilities of the investigated aliphatic alcohols were discussed. The reliability of the experimental tie-lines was satisfactorily confirmed by the Othmer–Tobias correlation. The experimental tie-lines data for the ternary systems have been correlated using the NRTL activity coefficient model. The separation of these aliphatic alcohols from their azeotropic aqueous mixtures is of particular interest to industrial process. The addition of the EPPS as an auxiliary agent breaks the (1-propanol + water) and (2-methyl-2-propanol + water) azeotropes. The possibility of using the new phase separation systems in the extraction process is demonstrated by using different dyestuffs.     

Dehydration of tetrahydrofuran by pervaporation using a composite membrane

Tetrahydrofuran (THF) is a strong aprotic solvent, commonly used in the pharmaceuticals industry due to its broad solvency for both polar and non-polar compounds. THF and water form a homogeneous azeotrope at 5.3 wt.% water thus simple distillation is not feasible to dehydrate THF below this concentration. Pervaporation offers a solution since it is not governed by vapour–liquid equilibria. However many polymer-based pervaporation membranes are cast utilizing THF as the casting solvent and so these membranes have a tendency to swell excessively in its presence. This results in poor separation performance and poor long-term stability and thus renders these membranes unsuitable for THF dehydration.In this study, a new membrane available from CM Celfa, CMC-VP-31 has been tested for the dehydration of THF. The membrane shows excellent performance when dehydrating THF with a flux of over 4 kg m⁻² h⁻¹ when dehydrating THF containing 10 wt.% water at 55 °C dropping to 0.12 kg m⁻² h⁻¹ at a water content of 0.3 wt.%. The permeances of water and THF in the membrane were calculated to be 11.76 × 10⁻⁶ and 7.36 × 10⁻⁸ mol m⁻² s⁻¹ Pa⁻¹, respectively, at 25 °C and found to decrease in the membrane with increasing temperature to values of 6.71 × 10⁻⁶ and 1.63 × 10⁻⁸ mol m⁻² s⁻¹ Pa⁻¹ at 55 °C. The flux and separation factor were both found to increase with an increase in temperature thus favouring the operation of CMC-VP-31 at high temperatures to optimize separation performance.     

Isothermal (vapour + liquid) equilibria in the binary and ternary systems composed of 2-propanol, 2,2,4-trimethylpentane,and 2,4-dimethyl-3-pentanone

(Vapour + liquid) equilibrium data in the three binary (2-propanol + 2,2,4-trimethylpentane), (2-propanol + 2,4-dimethyl-3-pentanone), (2,2,4-trimethylpentane + 2,4-dimethyl-3-pentanone) systems, and in the ternary (2-propanol + 2,2,4-trimethylpentane + 2,4-dimethyl-3-pentanone) system are reported. The data were measured isothermally at (330.00 and 340.00) K covering the pressure range (8 to 70) kPa. The binary (vapour + liquid) equilibrium data were correlated using the Wilson and NRTL equations by means of a robust algorithm for processing all isotherms together; resulting parameters were then used for calculation of phase behaviour in the ternary system and for subsequent comparison with experimental data. Azeotropic behaviour of the (2-propanol + 2,2,4-trimethylpentane) system was evaluated together with all available published data.     

Solubility and thermodynamic function of a new anticancer drug ibrutinib in 2-(2-ethoxyethoxy)ethanol + water mixtures at different temperatures

Ibrutinib is a recently approved anticancer drug recommended for the treatment of mantle cell lymphoma and chronic lymphocytic leukemia. It has been reported as practically insoluble in water and hence it is available in the market at higher doses. Poor solubility of ibrutinib limits its development to oral solid dosage forms only. In this work, the solubilities of ibrutinib were measured in various 2-(2-ethoxyethoxy)ethanol (Carbitol) + water mixtures at T = (298.15 to 323.15) and p = 0.1 MPa. The solubility of ibrutinib was measured using an isothermal method. The thermodynamics function of ibrutinib was also studied. The measured solubilities of ibrutinib were correlated and fitted with Van’t Hoff, the modified Apelblat and Yalkowsky models. The results of curve fitting of all three models showed good correlation of experimental solubilities of ibrutinib with calculated ones. The mole fraction solubility of ibrutinib was observed highest in pure 2-(2-ethoxyethoxy)ethanol (2.67 · 10⁻² at T = 298.15 K) and lowest in pure water (1.43 · 10⁻⁷ at T = 298.15 K) at T = (298.15 to 323.15) K. Thermodynamics data of ibrutinib showed an endothermic, spontaneous and an entropy-driven dissolution behavior of ibrutinib in all 2-(2-ethoxyethoxy)ethanol + water mixtures. Based on these results, ibrutinib has been considered as practically insoluble in water and freely soluble in 2-(2-ethoxyethoxy)ethanol. Therefore, 2-(2-ethoxyethoxy)ethanol could be used as a physiologically compatible cosolvent for solubilization and stabilization of ibrutinib in an aqueous media. The solubility data of this work could be extremely useful in preformulation studies and formulation development of ibrutinib.     

Self-microemulsifying and microemulsion systems for transdermal delivery of indomethacin: Effect of phase transition

This study investigated the transdermal delivery of indomethacin (model drug) from self-microemulsifying system, microemulsions and their phase transition systems. The study selected five formulations with fixed surfactant–oil ratio and increasing water content. These included a water free self-microemulsifying drug delivery system (SMEDDS), microemulsions containing water at 5% (w/w) (ME 5%) or at 10% (w/w) (ME 10%), a liquid crystalline formulation containing water at 30% (w/w) (LC) and coarse emulsion containing water at 80% (w/w) (EM). To clarify the results the study evaluated a microemulsion containing 10% (w/w) of receptor fluid (30%, v/v ethanol in phosphate buffered saline, PBS) (MEEB 10%) and a supersaturated system of ME 10% (MESS 10%). The viscosity increased with increasing water content up to certain limit above which the viscosity started to reduce. These formulations increased the transdermal drug flux compared to saturated drug solution in PBS (control) with formulation being ranked as SMEDDS > MEEB 10% ≈ ME 10% ≈ ME 5% > LC > EM > control. SMEDDS produced the longest lag time. The MESS 10% produced a flux value similar to that of SMEDDS but with shorter lag time suggesting transformation of SMEDDS into microemulsion after topical application with possible supersaturation. These systems can provide the formula with high flexibility in selecting the optimum viscosity as the tested preparations were able to enhance transdermal delivery in the range between SMEDDS, ME and the LC preparations with some enhancing ability for the EM.     

A density model based on the Modified Quasichemical Model and applied to the (NaCl + KCl + ZnCl2) liquid

A theoretical model for the density of multicomponent inorganic liquids based on the Modified Quasichemical Model has been presented previously. By introducing in the Gibbs free energy of the liquid phase temperature-dependent molar volume expressions for the pure components and pressure-dependent excess parameters for the binary (and sometimes higher-order) interactions, it is possible to reproduce, and eventually predict, the molar volume and the density of the multicomponent liquid phase using standard interpolation methods. In the present article, this density model is applied to the (NaCl + KCl + ZnCl₂) ternary liquid and a Kohler–Toop-like asymmetric interpolation method is used. All available density data for the (NaCl + KCl + ZnCl₂) liquid were collected and critically evaluated, and optimized pressure-dependent model parameters have been found. This new volumetric model can be used with Gibbs free energy minimization software, to calculate the molar volume and the density of (NaCl + KCl + ZnCl₂) ternary melts.     

Liquid–liquid equilibrium in ternary systems N,N-dimethylformamide + 2-methylpentane + methanol and N,N-dimethylformamide + methylcyclohexane + methanol

In the present paper, a study of temperature behaviour of the liquid–liquid equilibrium in ternary systems N,N-dimethylformamide + 2-methylpentane + methanol and N,N-dimethylformamide + methylcyclohexane + methanol. The analysis of critical curves of the liquid–liquid equilibrium by means of the regular solution model was carried out. The acquired predictions were subsequently verified experimentally.     

Phase equilibrium in systems with ionic liquids: An example for the downstream process of the Biphasic Acid Scavenging utilizing Ionic Liquids (BASIL) process. Part I: Experimental data

Experimental results are presented for the (liquid + liquid), (solid + liquid) and (solid + liquid + liquid) equilibria occurring in the downstream process of a typical example for the Biphasic Acid Scavenging Utilizing Ionic Liquids (BASIL)-processes. In a BASIL process an organic base is used to catalyze a chemical reaction and, at the same time, to scavenge an acid that is an undesired side product of that reaction. The particular example of a BASIL process treated here is the reaction of 1-butanol and acetylchloride to butylacetate and hydrochloric acid, where the acid is scavenged by the organic base 1-methyl imidazole (1-MIM) resulting in the ionic liquid 1-methyl imidazolium chloride. The reaction results in a two-phase system as butylacetate and the ionic liquid reveal a large liquid–liquid miscibility gap. The organic base has to be recovered. This is commonly achieved by treating the ionic liquid–rich liquid phase with an aqueous solution of sodium hydroxide (i.e., converting the ionic liquid to the organic base) and extracting the organic base by an appropriate organic solvent (e.g., 1-propanol). The work presented here deals in experimental work with the (liquid + liquid), (solid + liquid) and (solid + liquid + liquid) phase equilibria that are encountered in such extraction processes. Experimental results are reported for temperatures between about 298 K and 333 K: for the solubility of NaCl in several solvents (1-propanol, 1-MIM), (water + 1-MIM), (1-propanol + 1-MIM), (water + 1-propanol), and (water + 1-propanol + 1-MIM) and for the (liquid + liquid) equilibrium as well as for the (solid + liquid + liquid) equilibrium of the ternary system (NaCl + water + 1-propanol) and of the quaternary system (NaCl + water + 1-propanol + 1-MIM).