Frictional accumulation of negative muons and its application

A novel method is proposed for the efficient conversion of intermediate energy negative muons into a low-energy muon beam. It is based on using an electric field to eject muons from a moderator consisting of a large number of thin carbon foils placed perpendicularly to the axis of a high-field solenoid. High-energy muons are made to slow down within the moderator to an energy where further slowing down is inhibited by the electric field acceleration between the foils. The muons accumulate at low energy within the moderator hopping from one foil to the next until they come out as a low-energy muon beam. The resulting phase compression factor exceeds 1000. Efficient initial injection of the muons into the moderator is obtained either by letting the muons enter it in a direction opposite to the acceleration force or by producing the muons within a magnetic trap containing the moderator. A practical configuration based on the second scheme is presented. By implementing the method into the most intense muon production configurations a new pathway is opened that may ultimately compete with other schemes in the selection of the optimal source for high-energy muon colliders.     

逃逸函数算法及其在光学设计中的应用

用阻尼最小二乘法进行光学系统的优化 ,得到的结果往往是评价函数在结构变量空间的一个局部极小值。日本东京工艺大学的一色教授提出了能够跳出此局部极小值继续寻找其它结果的逃逸函数全局优化算法 ,该算法的运行由多个不加或加入逃逸函数的阻尼最小二乘法局部优化组成。描述了逃逸函数的基本原理 ,给出了北京理工大学研制的GOLD软件在加入了这种算法后对光学系统进行全局优化的设计实例。实验证明了逃逸函数算法是提高光学设计效率和质量的一种有效工具。     

Magnetoelectric effect in multilayer ferromagnetic-piezoelectric structures and its application in electronics

Magnetoelectric effect in multilayer structures composed of magnetostrictive and piezoelectric layers, materials and technologies used to fabricate these structures, and the results of studying the magnetoelectric effect in them are considered. Magnetic field sensors, transformers, and voltage generators based on the magnetoelectric effect in multilayer structures are described.     

激光准直仪的设计性物理实验

介绍了激光准直仪的结构、工作原理及其在设计性物理实验中的应用     

Infrared thermography and its application in the NDT of sandwich structures

Thermographic nondestructive testing (NDT) based on the thermal resistance effect of defects is developed for the inspection of delaminated and sandwiched defects embedded in composite structures. The resolution is examined for artificial delaminated defects in carbon-fiber honeycomb structures using conventional infrared radiation heating. The experimental results have demonstrated that radiation heating is effective for revealing defects in the composite structures.An experimental and computational hybrid system is developed for detecting defects in various composite structures. The system consists of an infrared thermal video system which measures the surface temperature distribution of the structure, a computer with a PIP-1024B image board which performs image processing of thermograms, and a HP ink jet XL printer. It is found that this system is readily applicable to the detection of defects located at the interface of the core and skin in honeycomb structures and delaminations in composite materials.     

Charge carrier accumulation and relaxation effects in the active region of polymer and composite (polymer-gold nanoparticles) field-effect transistor structures

The charge carrier accumulation and relaxation effects in the active region of polymer field-effect transistor structures based on the semiconducting polymer poly(9-epoxypropylcarbazole) have been studied by means of Kelvin probe microscopy. It has been shown that the introduction of gold nanoparticles into the polymer noticeably accelerates the processes considered. The characteristic times of charge accumulation and dissipation upon the application and removal of the potential at the transistor gate in this case are of a few minutes.     

伪装水声通信信号波形设计及其应用

提出伪装水声通信信号波形设计方法,将伪随机信号作为扩频数字水印与原始海豚whistles信号的复对数谱叠加,实现数字水印的嵌入;分别采用PEAQ算法与相关系数计算听觉与波形相似度,作为两种伪装效果的评价方法。提出匹配滤波与正交匹配追踪结合的自同步算法,使通信信号帧结构的设计保持原始whistles叫声的模式,提高了伪装效果。计算机仿真与海上试验验证了伪装通信方法的有效性:设计的通信信号与原始whistles信号相比,PEAQ打分结果均大于-0.5,相关系数值均大于0.98,达到了伪装的效果;试验中通信距离为5 km,单阵元接收的误码率小于10^-3,32元阵接收的误码率为0且通过垂直阵虚拟时间反转均衡技术提高了通信系统的稳健性。     

An electro-acoustics impedance error criterion and its application to active noise control

Characteristics of radiation impedance and its inducing variation of electrical impedance for a controllable source have been investigated. An impedance-based error criterion has been proposed and its application to active noise control is demonstrated through a coil driven loudspeaker. A general formula of radiation impedance is derived for two control strategies, according to the criterion of total acoustic power output. The radiation impedances of some commonly used sound sources are calculated. We discuss in detail the relation between variation of the input electrical impedance and radiation impedance for the two control strategies. An AC-bridge circuit is designed to measure the weak variation of electrical impedance resulted from radiation impedance. The input electrical impedance of a loudspeaker was measured and the experimental result is consistent with that of theoretical analysis. An impedance-based error criterion is proposed since the AC-bridge relative output is unique for a certain control strategy. The implementation of this criterion applied to an active control system is analyzed by simulations. An analogue control system is set up and experiments are carried out in a semi-anechoic chamber to verify the new control approach.     

Beam propagation method and its application to integrated optic structures and optical fibers

Practical applications of integrated optics require understanding of light propagation in dielectric waveguides of various geometries and calls for elegant and quick methods of analysis. In this paper, we use beam propagation method to analyse some integrated optic waveguiding elements such as waveguide with bend and branching waveguide. The method is extended to cylindrical co-ordinates, so that structures with circular symmetry can be easily solved. We first present a general beam propagation method algorithm, followed by results taking typical values for various parameters. Our studies show that the efficiency of the method depends on thez-propagation steps and on the number of points chosen for the Fourier transform. The algorithm developed can be used to analyse many other integrated optic structures and to study the effect of other input beam profiles.     

Effect of active control on optimal structures in wall turbulence

The effect of active control imposed at the wall on optimal structures in wall turbulence is studied by using a linear transient growth model.When the detection plane of the control is located in the buffer layer,the influence of the control on the transient growth of large scale motion becomes negligible as Reynolds number increases.However,if the control signal is detected at the plane located in the logarithm region,the transient growth at large scale can be greatly suppressed.New peak values of transient growth resulting from the strong blowing and suction on the wall exist.The study indicates that a proper selection of control imposed on the wall can suppress the large scale motion in the logarithmic region.     

Scaling and hierarchical structures in DNA sequences

A method of analyzing DNA correlation structure is introduced. Density fluctuations of nucleotides are shown to display an extended self-similarity scaling when the scale varies between 100 and 8000 base pairs. The scaling is accurately described by a hierarchical structure model of She and Leveque [Phys. Rev. Lett. 72, 336 (1994)]]. The derived model parameter beta is able to quantify moderately large-scale correlations which exist in a true DNA sequence but are absent in its randomly shuffled sequence and in a simulated model sequence by an evolution model of Hsieh et al. [Phys. Rev. Lett. 90, (2003)]]. Finally, it is shown that beta varies with the evolution category and measures the organizational complexity of the genome.     

Nodal line optimization and its application to violin top plate design

In the literature, most problems of structural vibration have been formulated to adjust a specific natural frequency: for example, to maximize the first natural frequency. In musical instruments like a violin; however, mode shapes are equally important because they are related to sound quality in the way that natural frequencies are related to the octave. The shapes of nodal lines, which represent the natural mode shapes, are generally known to have a unique feature for good violins. Among the few studies on mode shape optimization, one typical study addresses the optimization of nodal point location for reducing vibration in a one-dimensional beam structure. However, nodal line optimization, which is required in violin plate design, has not yet been considered. In this paper, the central idea of controlling the shape of the nodal lines is proposed and then applied to violin top plate design. Finite element model for a violin top plate was constructed using shell elements. Then, optimization was performed to minimize the square sum of the displacement of selected nodes located along the target nodal lines by varying the thicknesses of the top plate. We conducted nodal line optimization for the second and the fifth modes together at the same time, and the results showed that the nodal lines obtained match well with the target nodal lines. The information on plate thickness distribution from nodal line optimization would be valuable for tailored trimming of a violin top plate for the given performances.     

Interferometric grating method and its application in Fe-base shape memory alloy structure design

This paper presents an interferometric grating method used in measuring strain fields on a curved surface. This method can be used to determine the small and large strains with high sensitivity and has been applied successfully in Fe-base shape memory alloy (FSMA) structure design. In this study, five diffracted beam from the specimen surface produce the interferometric gratings through an optical system. Using image processing technique (fast Fourier transform with special interpolation and phase shifting technique), we have obtained the strain fields of outer surface of FSMA joint and contact pressure distribution on its inside surface which has mechanical deformation and transformation.     

A modeling technique for active control design studies with application to spacecraft microvibrations

Microvibrations, at frequencies between 1 and 1000 Hz, generated by on board equipment, can propagate throughout a spacecraft structure and affect the performance of sensitive payloads. To investigate strategies to reduce these dynamic disturbances by means of active control systems, realistic yet simple structural models are necessary to represent the dynamics of the electromechanical system. In this paper a modeling technique which meets this requirement is presented, and the resulting mathematical model is used to develop some initial results on active control strategies. Attention is focused on a mass loaded panel subjected to point excitation sources, the objective being to minimize the displacement at an arbitrary output location. Piezoelectric patches acting as sensors and actuators are employed. The equations of motion are derived by using Lagrange's equation with vibration mode shapes as the Ritz functions. The number of sensors/actuators and their location is variable. The set of equations obtained is then transformed into state variables and some initial controller design studies are undertaken. These are based on standard linear systems optimal control theory where the resulting controller is implemented by a state observer. It is demonstrated that the proposed modeling technique is a feasible realistic basis for in-depth controller design/evaluation studies.     

手性介质中后向散射米勒矩阵特性及其在血糖无创检测中的应用初探

利用斯托克斯-米勒矩阵表述分析偏振光在手性介质中的传输规律,利用瑞利近似下的单次散射模型和基于米氏散射理论的多次散射的蒙特卡罗方法,探讨葡萄糖对后向散射偏振光传输特性的影响,计算了不同葡萄糖浓度下的后向散射米勒矩阵. 结果表明在含有葡萄糖的手性介质中后向散射米勒矩阵的若干矩阵元表现出微弱的旋光效应,旋光度随葡萄糖浓度增大而增大. 为了检测低浓度下微小的旋光变化,定义了函数对含-不含葡萄糖的米勒矩阵元图像进行处理,提取由葡萄糖引入的图像差异. 结合无创血糖检测应用要求,分析了葡萄糖生理浓度下的矩阵元图像,获 关键词： 医用光学与生物技术 偏振光 斯托克斯-米勒表述 蒙特卡罗模拟     

Optical design and active optics methods in astronomy

Optical designs for astronomy involve implementation of active optics and adaptive optics from X-ray to the infrared. Developments and results of active optics methods for telescopes, spectrographs and coronagraph planet finders are presented. The high accuracy and remarkable smoothness of surfaces generated by active optics methods also allow elaborating new optical design types with high aspheric and/or non-axisymmetric surfaces. Depending on the goal and performance requested for a deformable optical surface analytical investigations are carried out with one of the various facets of elasticity theory: small deformation thin plate theory, large deformation thin plate theory, shallow spherical shell theory, weakly conical shell theory. The resulting thickness distribution and associated bending force boundaries can be refined further with finite element analysis.