The use of calcination in exposing the entrapped Fe particles from multi-walled carbon nanotubes grown by chemical vapour deposition

Multi-walled carbon nanotubes (MWCNTs) were synthesized a by chemical vapour deposition method. The effect of calcination at temperatures ranging from 300 to 550°C in exposing the metal nanoparticles within the nanotube bundles was studied. The degree of degradation of the structural integrity of the MWCNTs during the thermal process was studied by Raman spectroscopy, X-ray diffraction analysis, field-emission scanning electron microscopy, and transmission electron microscopy. The thermal behaviour of the as-prepared and calcined samples was investigated by thermogravimetric analysis. Calcination in air, at 400°C for 1 h, was found to be an efficient and simple method to extract metallic impurities from the amorphous carbon shells with minimal damage to the tube walls and lengths. The nanotubes were observed to be damaged at temperatures higher than 450°C.     

Quality improvement of single-walled carbon nanotubes by doping B in Fe/MgO catalyst

We demonstrate that the quality of the as-grown single-walled carbon nanotubes (SWCNTs) can be effectively improved by the addition of the B ingredient in the Fe/MgO catalyst. The as-grown SWCNTs were characterized by scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM) and Raman spectroscopy. The SWCNTs prepared by the pure Fe/MgO catalyst have relatively low graphite crystallinity and are coated by much amorphous carbon. The intensity ratio of the D- and G-bands (I_D/I_G) in Raman spectra is relatively high (0.098 for laser 532 nm and 0.075 for laser 785 nm). The SWCNTs grown from the Fe/MgO catalyst doped with 0.1 part of B have more regular graphite structure with little amorphous carbon. The I_D/I_G values reduced remarkably (0.041 for laser 532 nm and 0.040 for laser 785 nm). The effect would be attributed to the inhibitory action of the doped B on the formation of radical hydrocarbon species for the formation of SWCNTs.     

Effect of adding W to Fe catalyst on the synthesis of SWCNTs by arc discharge

Combining iron (Fe) and tungsten (W) as a bimetallic catalyst, we synthesized high-yield single-wall carbon nanotubes (SWCNTs) of narrow diameter distribution by a hydrogen–argon arc discharge method. Raman spectra indicate that the diameters of SWCNTs prepared using the Fe–W catalysts are about 0.5 nm smaller than those using Fe catalyst alone. The transmission electron microscopy and X-ray diffraction studies show that the SWCNTs prepared by the bimetallic catalyst coexist with few graphite flakes and other amorphous carbon. At the W content of 2–4 at%, tungsten cannot be found in the SWCNT samples. Thus by using a simple two-step purification process, high-purity SWCNT samples can be obtained. We have demonstrated the growth mechanism for the high melting metal (such as W, Mo)–Fe catalyst synthesis of SWCNTs by the arc discharge method.     

Direct Synthesis of ZIF-8 on Transmission Electron Microscopy Grids Allows Structure Analysis and 3D Reconstruction

The first example of layer-by-layer growth of a metal–organic framework (MOF) directly on transmission electron microscopy (TEM) grids is described. ZIF-8 is deposited on thin amorphous carbon films and subjected to a structure analysis by (scanning) TEM ((S)TEM). This method serves as a two-in-one synthesis and TEM sample-preparation technique and allows straightforward analysis of ZIF-8 crystallites. Artifacts resulting from sample preparation are completely avoided by this approach. The morphological properties, crystal structure, and the chemical composition of the material are investigated with high spatial resolution by a variety of methods of (analytical) electron microscopy. Furthermore, the incorporation of metallic nanoparticles in ZIF-8 by integrating a corresponding step into the layer-by-layer deposition process is examined. The formation of ZIF-8 crystals on the film proceeds as under the absence of nanoparticle-forming synthesis steps. However, the nanoparticles rather cover the supporting amorphous carbon film than being incorporated in the ZIF-8 material. This information cannot be obtained from standard characterization techniques but requires the application of analytical (S)TEM techniques.     

钯金属吸附对半导体性碳纳米管电输运的影响

利用物理蒸发技术,在半导体性的碳纳米管上沉积钯金属,利用导电原子力显微镜检测钯吸附对碳纳米管电输运的影响.结果表明:沉积的钯在碳纳米管上形成纳米颗粒,随着钯颗粒密度的增加,半导体性碳纳米管逐渐向金属性转变.利用第一性原理计算了吸附有钯原子的半导体性单壁碳纳米管的能带结构.研究发现,钯的覆盖率越高,其禁带宽度越窄,直至为零,定性说明了实验结果的合理性. 关键词： 单壁碳纳米管 钯纳米颗粒 导电原子力显微镜 第一性原理计算     

A parametric study of the synthesis and purification of single-walled carbon nanotubes using the high-pressure carbon monoxide process

Single-walled carbon nanotubes (SWCNTs) were synthesized using the high-pressure carbon monoxide disproportionation process. The SWCNT diameter, diameter distribution and yield can be varied depending on the process parameters. Important parameters are the temperature, the pressure, the CO gas flow rate and the nozzle injection velocity and geometry for the injection of reactant gas into the reaction zone. Carbon nanotubes as small as 1.0 nm in diameter have been produced. The purity and yield of the deposited material were increased with increasing CO gas flow by means of rapid heating of the gas mixture and using an optimum injection profile. Highly pure SWCNTs were produced at 1250 K, pressures between 5 and 10 bar and gas in the turbulent flow regime in the cold line of 2000–2500 sccm CO. The raw materials were purified by oxidation in high vacuum at 523 K in wet Ar/20 vol. % O₂ to remove SWCNT carbon-like impurities and to oxidize the iron catalyst nanoparticles. The iron oxides were removed by chemical treatment in concentrated HCl/C₂H₅OH mixture solution. The SWCNTs were analyzed by scanning electron microscopy, high-resolution transmission electron microscopy, atomic absorption spectroscopy and optical absorption spectroscopy to determine the purity, the diameter and diameter distribution, the chemical composition and the catalyst morphology, as well as the optical properties of deposited SWCNTs in dependence on the synthesis parameters. PACS 29.30.-h     

Effects of composition of catalysts on the preparation of single-walled carbon nanotubes synthesized over W–Co–MgO catalysts

A series of W–Co–MgO catalysts were prepared for the first time by decomposing a mixture of magnesium nitrate, ammonium paratungstate, citric acid, and cobalt nitrate. Single-walled carbon nanotubes (SWCNTs) were synthesized over these W–Co–MgO catalysts and the effects of the quantity of metal in the catalysts on the synthesis of SWCNTs were investigated by Raman spectroscopy and transmission electron microscopy (TEM). The results show that, among W–Co–MgO catalysts, the W1–Co5 catalyst was found to be most effective for synthesizing SWCNTs. The diameter distribution of as-grown SWCNTs prepared over the W1–Co5 catalyst was estimated to range from 0.72–1.64 nm. When the molar ratios of W:MgO and Co:MgO in the catalysts are more than 2:100 and 5:100, respectively, the amorphous carbon content or defect concentration of SWCNTs may be increased with the increase of the quantity of metal in the catalysts. The dependence of the diameter distribution of SWCNTs on the quantity of W in the catalysts is small. However, the proportion of SWCNTs with larger diameter is increased as the quantity of Co in the catalysts is increased owing to the increase in the number of larger active sites.     

Near-Field Optical Identification of Metallic and Semiconducting Single-Walled Carbon Nanotubes

Single-walled carbon nanotubes(SWCNTs),due to their outstanding electrical and optical properties,are expected to have extensive applications,such as in transparent conductive fims and ultra-small field-effect transistors(FETs).However,those applications can only be best realized with pure metallic or pure semiconducting SWCNTs.Hence,identifying and separating metallic from semiconducting SWCNTs in as-grown samples are crucial.In addition,knowledge of the type of an SWCNT is also important for f...     

In situ observation of carbon-nanopillar tubulization caused by liquidlike iron particles

The tubulization process of amorphous carbon nanopillars was observed in situ by transmis-sion electron microscopy. Amorphous carbon nanopillars were transformed into graphitic tubules by annealing at 650-900 degrees C in the presence of iron nanoparticles. A molten catalyst nanoparticle penetrated an amorphous carbon nanopillar, dissolving it, and leaving a graphite track behind. An iron nanoparticle moved with its shape changing like an earthworm. We concluded that the tubulization mechanism is a solid-(quasiliquid)-solid mechanism where the carbon phase transformation is a kind of liquid phase graphitization of amorphous carbon catalyzed by liquefied metal-carbon alloy nanoparticles.     

Differences in the catalyst removal from single- and double-walled carbon nanotubes

Single-walled carbon nanotubes (SWCNTs) and double-walled carbon nanotubes (DWCNTs) synthesized by a catalytic chemical vapor deposition method showed partially incorporated metal catalysts inside the graphene walls. In order to remove the metal catalysts, acid and thermal treatments were successively carried out. The methods for effective catalyst removal in SWCNTs and DWCNTs were examined by means of thermogravimetric analysis, electron microscopy, and electron paramagnetic resonance. The DWCNTs showed distinctly different metal catalyst removal behavior from that of SWCNTs due to the double-wall structure. The acid treatment is less efficient for catalyst removal from DWCNTs, while catalysts in SWCNTs are effectively removed by acid treatment. Additional thermal treatment is quite effective to remove metal catalysts from DWCNTs.     

Tuning the plasmon resonance of metallic tin nanocrystals in Si-based materials

The optical properties of metallic tin nanoparticles embedded in silicon-based host materials were studied. Thin films containing the nanoparticles were produced using RF magnetron sputtering followed by ex situ heat treatment. Transmission electron microscopy was used to determine the nanoparticle shape and size distribution; spherical, metallic tin nanoparticles were always found. The presence of a localized surface plasmon resonance in the nanoparticles was observed when SiO₂ and amorphous silicon were the host materials. Optical spectroscopy revealed that the localized surface plasmon resonance is at approximately 5.5 eV for tin nanoparticles in SiO₂, and at approximately 2.5 eV in amorphous silicon. The size of the tin nanoparticles in SiO₂ can be varied by changing the tin content of the films; this was used to tune the localized surface plasmon resonance.     

Non-covalent interaction of benzonitrile with single-walled carbon nanotubes

We have studied the interaction of benzonitrile with as-prepared and purified single-walled carbon nanotubes (SWCNTs). As-prepared SWCNTs, when suspended in benzonitrile, lead to a red colored dispersion which contains fragments composed mostly of amorphous carbon and carbon-coated catalyst, thus suggesting that benzonitrile is a solvent that can be used as one step of the purification process. Optical spectroscopic data (infrared, Raman, absorption) showed that purified carbon nanotubes interact weakly with benzonitrile. These experimental results are confirmed by first principles calculations that predict a very weak adsorption process through π–π interaction instead of through the free electron pair of the nitrile.     

催化剂组分对制备单壁碳纳米管的影响

利用柠檬酸法制备出了Mo-Fe-MgO，Mo-Co-MgO和W-Co-MgO催化剂，在小型流化床中，以Ar气为载气，在1123 K下催化裂解CH₄来制备单壁碳纳米管(SWCNTs).利用透射电子显微镜和拉曼光谱方法研究了催化剂组分对SWCNTs制备的影响，并对SWCNTs的生长机理进行了探索，研究结果表明，柠檬酸法是一种制备负载型SWCNTs催化剂的有效方法，三种催化剂都能够得到质量较好的SWCNTs,在1123 K左右，SWCNTs在三种催化剂上的生长过程可能类似于“微液相模型”.催化剂的组分对SWCNTs的管径分布影响较小，不同催化剂所得到的SWCNTs在内部结构上存在一定的差异.催化剂中加入第二组分Mo和W能有效提高产物的碳产率. 关键词： 单壁碳纳米管 催化化学气相沉积法 生长机理 拉曼光谱     

Medium range order of bulk metallic glasses determined by variable resolution fluctuation electron microscopy

Variable resolution fluctuation electron microscopy (FEM) experiments are implemented with hollow-cone dark-field transmission electron microscopy. Medium range order lengths of zirconium and iron based bulk metallic glasses and amorphous silicon nitride are determined from the FEM results. It shows that maximum normalized intensity variances of FEM images occur when their nominal resolution approaches the correlation length Λ of the amorphous materials. Additionally, differences in the length and magnitude of medium range order are compared between metallic and covalent bond amorphous materials.     

Formation of graphite encapsulated iron nanoparticles during mechanical activation and annealing analyzed by Mössbauer spectroscopy

The investigation performed by means of Mössbauer spectroscopy, X-ray diffraction and transmission electron microscopy demonstrated that the interaction in the system iron-amorphous carbon proceeds via the formation of nano-sized iron particles (10–40 nm) and the carbide nano- phases distributed over amorphous carbon matrix. The annealing of these samples causes a crystallization of the amorphous carbon, decomposition of nano-sized carbide phases and formation of iron nanoparticles (50–100 nm) encapsulated by graphite.     

Preparation and characterization of nickel nanoparticles in different carbon matrices

Using the solid-phase pyrolysis and chemical vapor deposition of nickel-phthalocyanine, we have fabricated ferromagnetic Ni nanoparticles in carbon matrices. The composition, structure, morphology, and magnetic properties of samples were investigated by means of scanning electron microscopy, energy dispersive X-ray microanalysis, X-ray diffraction technique, and ferromagnetic resonance. It is shown that the sizes of nanoparticles can be varied from ∼10 nm to ∼500 nm depending on the temperature and time of pyrolysis. The used method allows us to synthesize metal nanoparticles in different carbon matrices: in amorphous carbon plates, in graphitic capsules, and in carbon nanotubes.     

Purification and fractionation of single-walled carbon nanotubes

This study presents the approach to the purification and subsequent metallic/semiconductive (M/S) fractionation of single-walled carbon nanotubes (SWCNTs) with diameter from 1.04 to 1.60 nm produced via laser ablation. SWCNTs were purified through 3-fold refluxing processes in nitric acid followed by the multiple washings with sodium hydroxide and hydrochloric acid. The purified-annealed SWCNTs sample was divided into seven batches. One batch was dispersed in acetone as a reference sample. Each of the remaining batches were dispersed in one of the following surface agents: sodium dodecyl sulfate, sodium cholate acid (SCA), sodium deoxycholate, cetrimonium bromide, cetylpyridinium chloride, and benzalkonium chloride (BKC). SWCNT suspensions were fractionated via free solution electrophoresis technique. The recovered fractions from electrode and control areas were analyzed via optical absorption spectroscopy in UV–Vis–NIR range to evaluate the efficiency of the separation process. Raman spectroscopy was applied to analyze the purity of the samples. The catalyst content was estimated by atomic absorption spectroscopy. The morphology of the investigated samples was observed via high-resolution transmission electron microscopy. This contribution clearly shows that among the investigated surfactants there are two promising candidates (SCA and BKC) which can efficiently enrich the bulk sample in one electronic type of carbon nanotubes when FSE is applied.     

Features of the transformation of detonation nanodiamonds into onion-like carbon nanoparticles

On the basis of the results of investigations carried out by differential scanning calorimetry, X-ray diffraction, nuclear magnetic resonance, high-resolution transmission electron microscopy, and Raman spectroscopy, a scheme for the transformation of detonation nanodiamonds (which are agglomerates of smaller particles) into onion-like carbon nanoparticles during vacuum annealing is verified. At high temperatures, the transition of an individual nanodiamond occurs in a short period of time and may proceed via an amorphous state.     

Green luminescence from triphenylphosphine functionalized single-wall carbon nanotubes

In a simple wet chemical process, purified single-wall carbon nanotubes (SWCNTs) are treated with triphenylphosphine (Ph₃P) at room temperature. The functionalized material is characterized by scanning electron microscopy (SEM), high resolution transmission electron microscopy (HRTEM), Fourier transform infrared (FTIR) spectroscopy and Raman spectroscopy. HRTEM micrograph clearly reveals that triphenylphosphine nanocrystals of nearly uniform size are attached to the surfaces of SWCNTs. The hybrid structure shows remarkable green luminescence with peak emission at around 500 nm, under UV excitation. The photoluminescence may be attributed to charge transfer from the electron-donating phosphorous atoms to the carbon nanotubes.     

Selective growth, characterization, and field emission performance of single-walled and few-walled carbon nanotubes by plasma enhanced chemical vapor deposition

Single-walled carbon nanotubes (SWCNTs) and few-walled carbon nanotubes (FWCNTs) have been selectively synthesized by plasma enhanced chemical vapor deposition at a relative low temperature (550 °C) by tuning the thickness of iron catalyst. The parametric study and the optimization of the nanotube growth were undertaken by varying inductive power, temperature, catalyst thickness, and plasma to substrate distance. When an iron film of 3-5 nm represented the catalyst thickness for growing FWCNT arrays, SWCNTs were synthesized by decreasing the catalyst thickness to 1 nm. The nanotubes were characterized by field emission scanning electron microscopy, transmission electron microscopy, and Raman spectroscopy. Electron field emission properties of the nanotubes indicate that the SWCNTs exhibit lower turn-on field compared to the FWCNTs, implying better field emission performance.