Trinuclear silver(I) complexes of fluorinated pyrazolates

Silver pyrazolates [[3-(CF3)Pz]Ag]3, [[3-(CF3),5-(CH3)Pz]Ag]3, [[3-(CF3),5-(Ph)Pz]Ag]3, [[3-(CF3),5-(But)Pz]Ag]3, and [[3-(C3F7),5-(But)Pz]Ag]3 have been synthesized by treatment of the corresponding pyrazole with a slight molar excess of silver(I) oxide. This economical and convenient route gives silver pyrazolates in high (>80%) yields. X-ray crystal structures of [[3-(CF3),5-(CH3)Pz]Ag]3, [[3-(CF3),5-(But)Pz]Ag]3, and [[3-(C3F7),5-(But)Pz]Ag]3 show that these molecules have trinuclear structures with essentially planar to highly distorted Ag3N6 metallacycles. [[3-(CF3),5-(CH3)Pz]Ag]3 forms extended columns via intertrimer argentophilic contacts (the closest Ag...Ag separation between the neighboring trimers are 3.355 and 3.426 A). The trinuclear [[3-(CF3),5-(But)Pz]Ag]3 units crystallize in pairs, basically forming "dimers of trimers", with the six silver atom core of the adjacent trimers adopting a chair conformation. However, in these dimers of trimers, even the shortest intertrimer Ag...Ag distance (3.480 A) is slightly longer than the van der Waals contact of silver (3.44 A). [[3-(C3F7),5-(But)Pz]Ag]3, which has two bulky groups on each pyrazolyl ring, shows no close intertrimer Ag...Ag contacts (closest intertrimer Ag...Ag distance = 5.376 A). The Ag-N bond distances and the intratrimer Ag...Ag separations of the silver pyrazolates do not show much variation. However, their N-Ag-N angles are sensitive to the nature (especially, the size) of substituents on the pyrazolyl rings. The pi-acidic [[3,5-(CF3)2Pz]Ag]3 and [[3-(C3F7),5-(But)Pz]Ag]3 form adducts with the pi-base toluene. X-ray data show that they adopt extended columnar structures of the type [[Ag3]2.[toluene]]infinity and [[Ag3]'.[toluene]]infinity ([[3,5-(CF3)2Pz]Ag]3 = [Ag3],[[3-(C3F7),5-(But)Pz]Ag]3 = [Ag3]'), in which toluene interleaves and makes face-to-face contacts with [[3-(C3F7),5-(But)Pz]Ag]3 or dimers of [[3,5-(CF3)2Pz]Ag]3.     

Ag(TCNQ)准一维微米结构的制备及表征

利用溶液化学反应法制备了准一维结构的金属有机配合物Ag(TCNQ). X射线衍射(XRD)表明，所制备的Ag(TCNQ)为晶态结构;扫描电子显微镜(SEM)的观察证明，Ag(TCNQ)为准一维的微米管或线；Raman 测试结果表明，单根的Ag(TCNQ)形成时,Ag原子与TCNQ分子之间发生了电荷转移.对样品的制备工艺,即 Ag膜厚度和浸入溶液的反应时间对生成Ag(TCNQ)晶体形貌的影响进行了研究.结果表明，Ag膜越薄，生长出的晶体越稀疏;Ag膜与TCNQ乙腈溶液的反应时间影响其形貌的变化.反应历经三个阶段,晶体形成和长大阶段、反应完全阶段及溶解阶段.     

树枝状纳米银颗粒的制备与电活性

在Ag(NH3)2+溶液中,在钛基体上电沉积出树枝状纳米银颗粒,研究了沉积电位对树枝状纳米银颗粒形成的影响,探讨了这种树枝状纳米银颗粒形成的机理,并研究了这种钛基树枝状纳米银电极(Ag/Ti)在碱性溶液中对甲醛氧化的电催化活性。结果表明,在30 mmol/LAg(NH3)2+以及沉积电位在-1.8～-1.2 V(vsAg)时,形成了形态为树枝状的纳米银颗粒。在沉积电位为-1.6 V(vs Ag),Ag(NH3)2+浓度为30 mmol/L的溶液中,电沉积制备的这种树枝状纳米银电极(Ag/Ti)对甲醛氧化具有强的电催化活性。循环伏安曲线表明,在0.1 mol/LNaOH溶液中以及甲醛的浓度范围在0～40 mmol/L,甲醛浓度和它的氧化峰电流密度呈现良好的线性关系,检测下限达到0.662 mmol/L,这种新型的树枝状纳米银电极有望作为甲醛检测的传感器。     

萘啶酮的单核和双核银配合物的合成与晶体结构

合成了萘啶酮的单核和双核银配合物Ag₂(L₁)₂(HL₁=5，7-二甲基-1，8-萘啶-2-酮) (1)和[Ag(HL₂)(PPh₃)₂]·2H₂O(H₂L₂=1，8-萘啶-2,7-二酮) (2)。并通过元素分析，红外光谱及X-射线单晶衍射对其进行了结构表征。配合物1的晶体属单斜晶系，P1空间群。中心金属银为三配位T型几何构型，Ag-Ag间距离为0.274 8(2) nm，具有强的Ag…Ag作用。配合物2的晶体属三斜晶系，P2₁/n空间群。银与1个氮原子及2个磷原子形成三配位结构。     

Dissolution-recrystallization mechanism for the conversion of silver nanospheres to triangular nanoplates

A solution chemistry method for transforming polycrystalline Ag spherical particles into single crystalline triangular Ag nanoplates has been developed. The synthesis consists of three consecutive steps: (1) the synthesis of Ag nanospheres by NaBH(4) reduction of AgNO(3) in the presence of sodium citrate; (2) the conversion of citrate-stabilized Ag nanospheres into SDS (sodium dodecyl sulfate)-stabilized Ag nanospheres, and (3) the aging of the SDS-stabilized Ag nanospheres in 0.01 M NaCl solution. Our study indicates that the shape evolved through a Ag nanoparticle dissolution- and re-deposition process; and demonstrated the critical role of SDS in the process: SDS regulates the dynamics in the dissolved O(2)/Cl(-) etching of the Ag nanospheres and the reduction of the released Ag(+) by citrate ions in the same solution. SDS also functions as a shape-directing agent to assimilate the Ag(0) atoms into single crystalline triangular Ag nanoplates. A model for the shape conversion is also proposed which provides the clue for the synthesis of anisotropic Ag nanoparticles with other shapes (rods, wires, cubes, etc.).     

Activation of the C-I and C-OH bonds of 2-iodoethanol by gas phase silver cluster cations yields subvalent silver-iodide and -hydroxide cluster cations

The gas phase ion-molecule reactions of silver cluster cations (Ag(n)(+)) and silver hydride cluster cations (Ag(m)H(+)) with 2-iodoethanol have been examined using multistage mass spectrometry experiments in a quadrupole ion trap mass spectrometer. These clusters exhibit size selective reactivity: Ag(2)H(+), Ag(3)(+), and Ag(4)H(+) undergo sequential ligand addition only, while Ag(5)(+) and Ag(6)H(+) also promote both C-I and C-OH bond activation of 2-iodoethanol. Collision induced dissociation (CID) of Ag(5)HIO(+), the product of C-I and C-OH bond activation by Ag(5)(+), yielded Ag(4)OH(+), Ag(4)I(+) and Ag(3)(+), consistent with a structure containing AgI and AgOH moieties. Ag(6)H(+) promotes both C-I and C-OH bond activation of 2-iodoethanol to yield the metathesis product Ag(6)I(+) as well as Ag(6)H(2)IO(+). The metathesis product Ag(6)I(+) also promotes C-I and C-OH bond activation.DFT calculations were carried out to gain insights into the reaction of Ag(5)(+) with ICH(2)CH(2)OH by calculating possible structures and their energies for the following species: (i) initial adducts of Ag(5)(+) and ICH(2)CH(2)OH, (ii) the subsequent Ag(5)HIO(+) product, (iii) CID products of Ag(5)HIO(+). Potential adducts were probed by allowing ICH(2)CH(2)OH to bind in different ways (monodentate through I, monodentate through OH, bidentate) at different sites for two isomers of Ag(5)(+): the global minimum "bowtie" structure, 1, and the higher energy trigonal bipyramidal isomer, 2. The following structural trends emerged: (i) ICH(2)CH(2)OH binds in a monodentate fashion to the silver core with little distortion, (ii) ICH(2)CH(2)OH binds to 1 in a bidentate fashion with some distortion to the silver core, and (iii) ICH(2)CH(2)OH binds to 2 and results in a significant distortion or rearrangement of the silver core. The DFT calculated minimum energy structure of Ag(5)HIO(+) consists of an OH ligated to the face of a distorted trigonal bipyramid with I located at a vertex, while those for both Ag(4)X(+) (X = OH, I) involve AgX bound to a Ag(3)(+) core. The calculations also predict the following: (i) the ion-molecule reaction of Ag(5)(+) and ICH(2)CH(2)OH to yield Ag(5)HIO(+) is exothermic by 34.3 kcal mol(-1), consistent with the fact that this reaction readily occurs under the near thermal experimental conditions, (ii) the lowest energy products for fragmentation of Ag(5)HIO(+) arise from loss of AgI, consistent with this being the major pathway in the CID experiments.     

Mechanistic studies on the formation of silver nanowires by a hydrothermal method

Silver (Ag) nanowires were fabricated from silver chloride (AgCl) by the hydrothermal method. The successful formation of Ag nanowires relied on the low solubility of AgCl as a precursor and the structural change of glucose to polymer on the Ag nanowire (protective layer). The Ag(+) ion concentration in the reaction solution containing AgCl was initially low, but after a reaction time of over 12 h, Ag(+) gradually reduced to Ag metal. Transmission electron microscope, Raman spectrometery, and X-ray photoelectron spectroscopy revealed that the surface of the obtained Ag nanowires possessed a carbon-rich layer with a carboxyl group, and the Ag(+) ion coordinated with the carboxyl group of this layer. The difference in the surface-free energy of Ag crystals changed the crystal growth rate that impelled the anisotropic growth of the Ag particles. By examining various reaction conditions, it was determined that the ratio of Cl(-) to Ag(+), reaction temperature, and reaction time are important factors for successful preparation of Ag nanowires. Under the reaction condition that the molar ratio of Cl(-) to Ag(+) at 160 °C for 24 h is above equimolar concentration, uniform Ag nanowires were successfully prepared.     

Experimental and theoretical study on gas-phase ion/molecule reactions of silver trimer cation, Ag3+, with 12-crown-4

The reaction mechanisms of silver trimer cation, Ag3+, with 12-crown-4 (12C4) were studied experimentally and theoretically. Using a cylindrical ion trap time-of-flight mass spectrometer, gas-phase ion/molecule reactions of Ag3+ with 12C4 were observed. Metal-ligand complexes of [Ag(12C4)]+, [Ag3(12C4)]+ and [Ag3(12C4)2]+, and of [Ag(12C4)2]+ and [Ag3(12C4)3]+, were observed as the reaction intermediates and terminal products, respectively. The formations of the [Ag12C4]+ and [Ag(12C4)2]+ complexes indicated that the neutral dimer (Ag2) had been eliminated from the trimer cation. From the results of ab initio calculations at the HF/LanL2DZ level of theory and the experiments, it is suggested that three 12C4 molecules can attach to Ag3+ through consecutive reactions and that neutral Ag2 can be easily eliminated from [Ag3(12C4)]+.     

Photodeposition of Ag2S quantum dots and application to photoelectrochemical cells for hydrogen production under simulated sunlight

UV light irradiation of TiO(2) (λ > 320 nm) in a mixed solution of AgNO(3) and S(8) has led to the formation of Ag(2)S quantum dots (QDs) on TiO(2), while Ag nanoparticles (NPs) are photodeposited without S(8). Photoelectrochemical measurements indicated that the Ag(2)S photodeposition proceeds via the preferential reduction of Ag(+) ions to Ag(0), followed by the chemical reaction with S(8). The application of this in situ photodeposition technique to mesoporous (mp) TiO(2) nanocrystalline films coated on fluorine-doped SnO(2) (FTO) electrodes enables formation of Ag(2)S QDs (Ag(2)S/mp-TiO(2)/FTO). Ag(2)S/mp-TiO(2)/FTO has the interband transition absorption in the whole visible region, while in the spectrum of Ag/mp-TiO(2)/FTO, a localized surface plasmon resonance absorption of Ag NPs is present centered at 490 nm. Ag(2)S QD-sensitized photoelectrochemical cells using the Ag(2)S/mp-TiO(2)/FTO and Ag/mp-TiO(2)/FTO photoanodes were fabricated. Under illumination of one sun, the Ag(2)S photoanode cell yielded H(2) at a rate of 0.8 mL·h(-1) with a total conversion efficiency of 0.29%, whereas the Ag/mp-TiO(2)/FTO photoanode is inactive.     

CTAB作用下纳米复合材料Ag/ZnO-SnO2的制备与光催化降解罗丹明B

在模板剂溴化十六烷基三甲基胺(CTAB)作用下,采用溶胶-凝胶法再结合程序升温溶剂热法制备了纳米复合材料Ag/ZnO-SnO2(CTAB),其中Ag,Zn,Sn摩尔比为0.1∶2∶1.利用X射线衍射(XRD)、X射线光电子能谱(XPS)、透射电子显微镜(TEM)、扫描电子显微镜配合X射线能量色散谱(SEM-EDS)和N2吸附-脱附测定等方法对复合材料的组成、结构及形貌等进行了表征.结果表明,该复合材料具有纤锌矿和金红石结构,Ag以单质形式存在.与未经CTAB作用的样品相比,Ag/ZnO-SnO2(CTAB)颗粒分布更均匀,且呈现规则的纳米棒状结构.复合材料在紫外光和可见光作用下对罗丹明B(RhB)的光催化降解结果显示,样品Ag/ZnO-SnO2(CTAB)的光催化活性明显高于Ag/ZnO-SnO2、ZnO-SnO2、ZnO和商用P-25.     

Gas phase synthesis and reactivity of Agn+ and Ag(n-1)H+ cluster cations

Multi-stage mass spectrometry (MSn) on [(M + Ag - H)x + Ag]+ precursor ions (where M = an amino acid such as glycine or N,N-dimethylglycine) results in the formation of stable silver (Ag3+, Ag5+ and Ag7+) and silver hydride (Ag2H+, Ag4H+ and Ag6H+) cluster cations in the gas phase. Deuterium labelling studies reveal that the source of the hydride can be either from the alpha carbon or from one of the heteroatoms. When M = glycine, the silver cyanide clusters Ag4CN+ and Ag5(H,C,N)+ are also observed. Collision induced dissociation (CID) and DFT calculations were carried out on each of these clusters to shed some light on their possible structures. CID of the Agn+ and Ag(n-1)H+ clusters generally results in the formation of the same Ag(n-2)+ product ions via the loss of Ag2 and AgH respectively. DFT calculations also reveal that the Agn+ and Ag(n-1)H+ clusters have similar structural features and that the Ag(n-1)H+ clusters are only slightly less stable than their all silver counterparts. In addition, Agn+ and Ag(n-1)H+ clusters react with 2-propanol and 2-butylamine via similar pathways, with multiple ligand addition occurring and a coupled deamination-dehydration reaction occurring upon condensation of a third (for Ag2H+) or a fourth (for all other silver clusters) 2-butylamine molecule onto the clusters. Taken together, these results suggest that the Agn+ and Ag(n-1)H+ clusters are structurally related via the replacement of a silver atom with a hydrogen atom. This replacement does not dramatically alter the cluster stability or its unimolecular or bimolecular chemistry with the 2-propanol and 2-butylamine reagents.     

Effect of Incorporation of Silver on the Electrical Properties of Sol-Gel-Derived Titania Film

Metallic Ag nanoparticles-incorporating titania films were prepared using the sol-gel method. X-ray diffraction (XRD) patterns, UV/Vis optical spectra and transmission electron microscopy (TEM) images were recorded to characterize the Ag/titania composite films. Electrometer was used to estimate the resistance of Ag/titania composite film to understand the effect of the incorporation of metallic Ag nanoparticles on the electrical properties of titania film. The results showed that metallic Ag nanoparticles distributed randomly in titania film and most metallic Ag particles size was in the range of 5–15 nm. The agglomeration of a small quantity of metallic Ag particles occurred and when the amount of Ag species was increased the agglomeration was enhanced. The resistance of Ag/titania composite films decreased greatly compared with pure titania film.     

Characterization of Silver Flake Lubricants

There is a thin layer of organic lubricant on commercial silver (Ag) flakes that are widely used as the fillers in electrically conductive adhesives (ECAs). This lubricant layer highly affects the properties such as conductivity of the ECAs. Therefore, understanding the behavior of Ag flake lubricant layer is essential for developing high performance ECAs. This work is aimed at studying the chemical nature of the lubricant layer, interaction between the lubricant layer and Ag flakes, and thermal behavior of the lubricants during heating. A blank Ag powder is ball-milled into Ag flakes with five fatty acids that have different carbon–hydrogen chain length as lubricants. After lubrication, the Ag flakes are studied using scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and thermogravimetry (TG), and diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). It is found that (i) Ag flakes lubricated with fatty acids of different chain lengths have exothermic DSC peaks and mass losses at different temperatures, (ii) the lubricant layer on the lubricated Ag flake surfaces is a salt formed between the acid and Ag, and (iii) exothermic DSC peaks (in air) of a lubricated Ag flake is probably due to the oxidation of lubricant layer on the Ag flake surface. This revised version was published online in July 2006 with corrections to the Cover Date.     

Switchable surface properties through the electrochemical or biocatalytic generation of Ag0 nanoclusters on monolayer-functionalized electrodes

The electroswitchable and the biocatalytic/electrochemical switchable interfacial properties of a Ag(+)-biphenyldithiol (BPDT) monolayer associated with a Au surface are described. Upon the application of a potential corresponding to -0.2 V the Ag(+)-BPDT is reduced to the Ag(0)-BPDT interface, and silver nanoclusters are generated on the interface. The application of a potential that corresponds to 0.2 V reoxidizes the monolayer to the Ag(+)-BPDT monolayer. The reversible electrochemical transformation of the Ag(+)-BPDT monolayer and of the Ag(0)-BPDT surface was followed by electrochemical means and surface plasmon resonance spectroscopy (SPR). The SPR experiments enabled us to follow the kinetics of nanoclustering of Ag(0) on the surface. The hydrophobic/hydrophilic properties of the surface are controlled by the electrochemically induced transformation of the interface between the Ag(+)-BPDT and Ag(0)-BPDT states. The Ag(0)-BPDT monolayer reveals enhanced hydrophilicity. The hydrophobic/hydrophilic properties of the interface were probed by contact angle measurements and force interactions with a hydrophobically-functionalized AFM tip. The Ag(0)-BPDT interface was also biocatalytically generated using alkaline phosphatase, AlkPh, and p-aminophenyl phosphate as substrate. The biocatalytically generated p-aminophenol reduces Ag(+) ions associated with the surface to Ag(0) nanoclusters. This enables the cyclic biocatalytic/electrochemical control of the surface properties of the modified electrode.     

Size-dependent surface reactions of Ag nanoparticles supported on highly oriented pyrolytic graphite

Various sizes of Ag particles were grown on highly oriented pyrolytic graphite (HOPG) surfaces, which had previously been modified with nanopits to act as anchoring sites. Surface reactions of O2, CHCl3, and CCl4 on the Ag particles and bulk Ag(111) surfaces were studied by X-ray photoelectron spectroscopy (XPS), and it has been shown that size dependence of O2 and CHCl3 reactions on Ag differs from that of CCl4. Weak reactions of O2 and CHCl3 were observed on the bulk Ag(111) surfaces, while strong reactions occur on Ag particles with medium Ag coverage, suggesting that the reactions are controlled by the number of surface defect sites. On the contrary, the dissociation of CCl4 is mainly determined by the exposed Ag facet area, mainly Ag(111) facet, and strong dissociation reaction happens on the bulk Ag(111) surface. The results suggest that the size effects, which are often discussed in heterogeneous catalysis, are strongly dependent on the reaction mechanism.     

苯乙烯在Ag(111)和Ag(110)表面环氧化反应结构敏感性的理论研究

采用密度泛函理论(DFT)对苯乙烯在Ag(110)表面和Ag(111)表面的环氧化反应进行了计算研究. 经计算, 在Ag(110)表面预吸附氧原子更易吸附在3 重穴位(3h), 吸附能为-3.59 eV; 在Ag(111)表面预吸附氧原子的最稳定吸附位是fcc 位, 吸附能为-3.69 eV. 苯乙烯的环氧化反应过程首先经过一个金属中间体, 然后再进一步反应变为产物, 其中经过直链中间体较支链中间体更加有利. Ag(110)面的反应活化能一般大于Ag(111)面的, 并且微观动力学模拟结果表明, Ag(111)表面生成环氧苯乙烷的选择性要明显高于Ag(110)表面(0.38 与 0.003), 原因是Ag(111)面环氧化反应活化能小于苯乙醛及燃烧中间体的活化能, 而在Ag(110)上正相反.     

银金硫三元团簇的形成与光过程的硫金敏化

采用激光烧蚀银金硫混合物样品产生团簇离子,用飞行时间质谱仪检测的方法研究了银金硫三元团簇离子的形成。研究表明,银硫二元团簇、金硫二元团簇和银金硫三元团簇同时生成,主要系列有(Ag~2~n~+~1S~n~-~1)^+、(Ag~2~n~-~1S~n)^-、(Ag~2~nAuS~n)^+和(Ag~2~nAuS~n~+~1)^-。将其与感光乳剂中的金硫敏化中心相关联,指出正离子团簇和负离子团簇分别在曝光过程中起着光电子陷阱和正空穴陷阱的作用。     

Formation of binary silver sulfide clusters and sulfur sensitization of photographic process

Formation of silver sulfide binary cluster ions,as well as the effects of silver and sulfur content proportion,the cluster size range,the influence of laser fluence,the UV laser photolysis,etc.,was studied with the laser ablation method and a tandem time-of-flight mass spectrometer.The results show that there exist two different forms of positively charge-bearing cluster ions;[(Ag2S)n Ag] + and [ (Ag2S)n-1 Ag3]+.The most possible forms of the sulfur sensitization centers acting as traps of photoelectrons are [Ag2S] +,[ Ag2S Ag] +,[ Ag2S Ag3]+ and the analogs.     

Zwitterionic metalates of group 11 elements and their use as metalloligands for the assembly of multizwitterionic clusters

Reaction of RNHC(S)PPh2NPPh2C(S)NR (HRSNS; R = Me, Et) with M(I) (M = Cu, Ag, Au) salts afforded zwitterionic complexes of the general formula [M(RSNS)] (M = Cu, Ag, Au). The ligand was found in the solid state in S,S-kappa2 and S,N,S-kappa3 coordination fashions. [Cu(RSNS)] and [Ag(RSNS)] can be used as metalloligand building blocks for the assembly of pentanuclear multizwitterionic Cu5, Cu3Ag2 and Ag5 core clusters of the general formula [M'2{M(RSNS)}3]2+ (M = Cu, M' = Cu, Ag; M = M' = Ag) upon reaction with suitable M' salts. The crystal structures of the most significant compounds are reported herein. Compound [Ag2{Ag(RSNS)}2(OTf)2] was also isolated and structurally characterized, representing a model for the intermediate species of the aforementioned assembly.     

Far-infrared spectroscopy of small neutral silver clusters

The vibrational spectra of Ag(3) and Ag(4) are recorded in the far-infrared between 100 and 220 cm(-1) using multiple photon dissociation spectroscopy of their complexes with Ar atoms. For Ag(3)-Ar two IR active bands are found at 113 and 183 cm(-1), for Ag(4)-Ar one band at 163 cm(-1) and very weak IR activity at 193 cm(-1) are observed. This, together with recent theoretical studies, allows for a reassignment of the controversial vibrational data reported earlier for the bare Ag(3) cluster. The influence of the number of Ar atoms in the complexes on the frequency of the IR active modes is found to be minor. However, the low-frequency IR-active band of Ag(3) shifts with increasing Ar coverage from 113 cm(-1) for Ag(3)-Ar to about 120 cm(-1) for Ag(3)-Ar(4), the value known for Ag(3) embedded in rare gas matrices.