Platinum-free tungsten carbides as an efficient counter electrode for dye sensitized solar cells

Mesoporous tungsten carbides displayed an excellent solar conversion efficiency (7.01%) as a counter electrode for dye sensitized solar cells under 100 mW cm(-2), AM 1.5G illumination, which corresponded to ca. 85% of the efficiency of the conventional platinum electrode.     

Sol-gel spin coated well adhered MoO3 thin films as an alternative counter electrode for dye sensitized solar cells

In this work, we aim to develop a viable, inexpensive and non-toxic material for counter electrodes in dye sensitized solar cells (DSSCs). We employed an ultra-simple synthesis process to deposit MoO₃ thin films at low temperature by sol-gel spin coating technique. These MoO₃ films showed good transparency. It is predicted that there will be 150 times reduction of precursors cost by realizing MoO₃ thin films as a counter electrode in DSSCs compared to commercial Pt. We achieved a device efficiency of about 20 times higher than that of the previous reported values. In summary we develop a simple low cost preparation of MoO₃ films with an easily scaled up process along with good device efficiency. This work encourages the development of novel and relatively new materials and paves the way for massive reduction of industrial costs which is a prime step for commercialization of DSSCs.     

Quantum dot-sensitized solar cells employing Pt/C60 counter electrode provide an efficiency exceeding 2%

A microporous platinum/fullerenes (Pt/C 60) counter electrode was prepared by using a facile rapid thermal decomposition method,and the quantum-dot sensitized solar cell (QDSSC) of Pt/C 60-TiO 2-CdS-ZnS and Pt/C 60-TiO 2-CdTe-ZnS was fabrication.The technique forms a good contact between QDs and TiO 2 films.The photovoltaic performances of the as-prepared cells were investigated.The QDSSCs with Pt/C 60 counter electrode show high power conversion efficiency of 1.90% and 2.06%,respectively (under irradiation of a simulated solar light with an intensity of 100 mW cm 2),which is comparable to the one fabricated using conventional Pt electrode.     

Self-assembled monolayer of graphene/Pt as counter electrode for efficient dye-sensitized solar cell

Monolayer of PDDA/graphene/PDDA/H(2)PtCl(6) is fabricated on conductive glass using electrostatic layer-by-layer self-assembly technique, which is then converted to graphene/Pt monolayer for use as counter electrode in dye-sensitized solar cell (DSSC). As compared to the sputtered Pt counter electrode, the self-assembled monolayer reduces the Pt amount by about 1000-fold but exhibits comparable photovoltaic performance. This finding provides a new route to fabrication of cheap and efficient counter electrodes for flow-line production of DSSCs.     

High efficiency solar cell based on dye sensitized plasma treated nano-structured TiO2 films

Radio frequency (RF) plasma treatment of nano-structured TiO₂ was carried out to enhance the efficiency of dye-sensitized solar cell. Relative change in surface chemistry and hydrophilic characteristics was investigated by X-ray photoelectron spectroscopy (XPS) and contact angle measurements. Increase in surface hydrophilic and carboxyl functionality had enhanced the dye molecule adsorption. Plasma treatment has also increased proportion of Ti³⁺ surface site which supported transport of electron and hole between dye molecules and photoelectrode. Plasma treated TiO₂ at optimum condition had increased efficiency by 40% relative to untreated TiO₂.     

Metal chalcogenide complex-mediated fabrication of Cu2S film as counter electrode in quantum dot sensitized solar cells

Cu2S film onto FTO glass substrate was obtained to function as counter electrode for polysulfide redox reactions in CdS/CdSe co-sensitized solar cells by sintering after spraying a metal chalcogenide complex, N4H9Cu7S4 solution. Relative to Pt counter electrode, the Cu2S counter electrode provides greater electrocatalytic activity and lower charge transfer resistance. The prepared Cu2S counter electrode represented nanoflower-like porous film which was composed of Cu2S nanosheets on FTO and had a higher surface area and lower sheet resistance than that of sulfided brass Cu2S counter electrode. An energy conversion efficiency of 3.62% was achieved using the metal chalcogenide complex-mediated fabricated Cu2S counter electrode for CdS/CdSe co-sensitized solar cells under 1 sun, AM 1.5 illumination.     

Electrophoretic preparation of graphene-iron oxide nanocomposite as an efficient Pt-free counter electrode for dye-sensitized solar cell

Journal of Solid State Electrochemistry - Fe3O4-reduced graphene oxide (Fe3O4-RGO) binder-free counter electrode (CE) is prepared by using an easy and low-cost electrophoretic deposition method and...     

Improved efficiency of TiO2 nanotubes in dye sensitized solar cells by decoration with TiO2 nanoparticles

In the present work we investigate the effect of TiCl₄ treatments on the photoconversion efficiency of TiO₂ arrays used in dye sensitized solar cell. The results clearly show that by an appropriate treatment the decoration of the TiO₂ nanotube arrays with TiO₂ nanocrystallites of a typical size of 3 nm can be achieved. These particles can be converted to mixture of anatase and rutile phase by annealing in air. This decoration of the TiO₂ nanotubes leads to a significantly higher specific dye loading and, for certain annealing treatments, to a doubling of the solar cell efficiency (in our case from 1.9% to 3.8% of AM 1.5 conditions) can be achieved.     

Enhancement of the efficiency of dye-sensitized solar cell with multi-wall carbon nanotubes/polythiophene composite counter electrodes prepared by electrodeposition

For the purpose of increasing the energy conversion efficiency of dye-sensitized solar cells (DSSCs), multi-wall carbon nanotube (MWCNT)/polythiophene (PTh) composite film counter electrode has been fabricated by electrophoresis and cyclic voltammetry (CV) in sequence. The morphology and chemical structure have been characterized by transmission electron microscopy (TEM), scanning electron microscope (SEM), and Raman spectroscopy respectively. The overall energy conversion efficiency of the DSSC employing the MWCNT/PTh composite film has reached 4.72%, which is close to that of the DSSC with a platinum (Pt) counter electrode (5.68%). Compared with a standard DSSC with MWCNT counter electrode whose efficiency is 2.68%, the energy conversion efficiency has been increased by 76.12% for the DSSC with MWCNT/PTh counter electrode. These results indicate that the composite film with high conductivity, high active surface area, and good catalytic properties for I₃⁻ reduction can potentially be used as the counter electrode in a high-performance DSSC.     

Effect of the thickness of the Pt film coated on a counter electrode on the performance of a dye-sensitized solar cell

The effects of the thickness and morphology of a Pt film coated on a counter electrode on the performance of a dye-sensitized solar cell (DSC) were investigated. Deposition of a Pt film ranging in thickness from 2 to 415 nm gradually decreases the sheet resistance of the counter electrode. No significant difference in the charge-transfer resistance at the electrolyte|counter electrode interface was observed for a Pt film thickness ranging from 25 to 415 nm. A high energy conversion efficiency of approximately 5% can be obtained for DSCs based on a counter electrode with a very thin Pt film of 2 nm, as well as with a 415-nm thick Pt film. These results are important for reducing production costs by reducing the required amount of expensive platinum.     

Growth of aligned polypyrrole acicular nanorods and their application as Pt‐free semitransparent counter electrode in dye‐sensitized solar cell

Polypyrrole films on fluorine doped tin oxide (FTO)‐coated glass substrate were prepared in situ by placing FTO/glass substrates where pyrrole was polymerized by methyl orange‐ferric chloride complex. The atomic force microscopy image indicated growth of acicular nanorods of polypyrrole. These films exhibited catalytic activity towards I₃⁻/I⁻ redox couple and have been investigated for counter electrode application in dye‐sensitized solar cell (DSSC). The fabricated DSSC with N719 dye/TiO₂ as photoanode, and PPy/FTO as counter electrode shows ~1.7% efficiency.     

Template‐free synthesis of polyaniline nanobelts as a catalytic counter electrode in dye‐sensitized solar cells

Polyaniline (PAn) nanobelts were synthesized by simply mixing aniline and hydrochloric acid aqueous solution with ammonium peroxydisulfate and hydrochloric acid aqueous solution at room temperature without any templates. The PAn nanobelt paste with polytetrafluoroethylene as binder is proper for low‐cost and efficient casting processes such as doctor blade method, screen printing, spin‐casting, and even roll‐to‐roll painting. The porous network structure of the PAn nanobelt counter electrode was obtained after drying the paste on the conductive glass. The as‐prepared PAn nanobelt counter electrode showed nearly equivalent electrochemical catalytic activity as that of thermal decomposed Pt counter electrode, owing to the well‐connected conductive network and high active surface area. The power conversion efficiency of dye‐sensitized solar cell with PAn nanobelt counter electrode attained 90% of the value of the cell with Pt counter electrode. Copyright © 2014 John Wiley & Sons, Ltd.     

CZTS counter electrode in dye-sensitized solar cell: enhancement in photo conversion efficiency with morphology of TiO2 nanostructured thin films

Journal of Solid State Electrochemistry - In the present investigation, kesterite phase Cu2ZnSnS4 (CZTS) nanoparticle, and one-dimensional (1D) nanorods and three-dimensional (3D) flower-like...     

Role of nanochemical environments in porous TiO2 in photocurrent efficiency and degradation in dye sensitized solar cells

Elongated dye sensitized solar cells with a thickness gradient of the nanoporous TiO2 front electrode were used to assess the impact of the layer thickness on photocurrent and degradation. The photocurrent efficiency passes through a maximum (in our case at about 12 microm). Interestingly, the degradation rate also strongly depends on the layer thickness and is about 3 times faster for a 15-microm cell (in comparison with a 1-microm cell). To explain these nonanticipated results, a model to describe the I3(-)/I- concentration within a typical dye sensitized solar cell under steady-state conditions was derived. It includes the nanoporous TiO2 layer and a bulk solution with their different mobilities for the electrolyte species. Using typical parameters from the literature, it turned out that, despite the fact that the initial I- concentration is about 1 order of magnitude larger and the assumed diffusion coefficient is 1.3 times higher, the depletion of the I- concentration at the TiO2/FTO front contact happens to be in the same range as the depletion of the I3(-) concentration at the back contact. This stresses the importance of iodide in nanoporous environments for both the maximum attainable photocurrent and its role in the regeneration of the oxidized dye. Enhanced degradation rates might be related to poor iodide supply, since the oxidized state cannot be regenerated efficiently.     

聚(4-乙烯基吡啶)的合成及其在染料敏化太阳电池中的应用

采用自由基聚合法合成了聚(4-乙烯基吡啶)(P4VP),并用于制备染料敏化太阳电池的凝胶电介质.研究了P4VP含量对电解质和太阳电池性能的影响.结果表明,以P4VP为骨架通过化学交联固化液态电解质制备的有机胶体电解质体系有机相可溶剂化Li ,当其含量为7.5wt%时体系离子电导率可达5.77mS/cm与液态电解质相当.利用这种准固态电解质制备的敏化太阳电池在100mW/cm2,25℃下获得光电转换效率2.3%.     

Photoelectrochemical properties of MWCNT-TiO2 hybrid materials as a counter electrode for dye-sensitized solar cells

The MWCNT-Ti02 hybrid materials were prepared by a simply mixing method and used as a counter electrode （CE） for dye-sensitized solar cells. Compared with the platinum CE, MWCNT-TiO2 CE has the similar redox voltage and current response in the cyclic voltammetry. The electrochemical catalytic activity was characterized by the electrochemical impedance spectroscopy and Tafel curve, including the equivalent circuit, the exchange current density, the limiting diffusion current density, and the diffusion coefficient of triiodide/iodide redox species. The results indicate that the reduction process from triiodide to iodide is determined by the kinetic-controlled and diffusion-limited processes. The device performance is optimal based on the MWCNT-TiO2 （mass ratio of 2：1） CE, such as the open-circuit voltage of 0.72 V, the short-circuit photocurrent density of 15.71 mA/cm2, the fill factor of 0.68, and the photon-to-electron conversion efficiency of 7.69%.     

Improvement of the performance of dye sensitized solar cell using ZnO nanorods array deposited with Ag nanoparticles as photoanode

Well-aligned zinc oxide (ZnO) nanorods (NRs) arrays deposited with Ag nanoparticles (NPs) are prepared by a liquid phase epitaxial growth process followed by a reduction of Ag on the surface of the ZnO NRs. Transmission electron microscopy images show that most Ag NPs are deposited on the upper part of the ZnO NRs, and the overall optical absorption in the range of visible light can be enhanced due to the surface plasmon resonance of the Ag NPs. ZnO NRs with and without Ag NPs are used to assemble dye sensitized solar cells. Devices fabricated from the Ag NPs/ZnO NRs composite arrays exhibit a higher open voltage, short circuit current and fill factor than that fabricated from the bare ZnO NRs array, thus, the overall efficiency of the as-fabricated cell is increased from less than 0.5?% to 0.8?%. The main reason for the enhancement of the device performance may be ascribed to that the electron transfer back from ZnO to the dye and electrolyte is blocked by the Schottky barrier at the Ag/ZnO interface, resulting in a great increase of the electron density at the ZnO conduction band.     

Role of electronic structure of ruthenium polypyridyl dyes in the photoconversion efficiency of dye‐sensitized solar cells: Semiempirical investigation

ZINDO/S calculations on cis‐Ru(4,4′‐dicarboxy‐2,2′‐bipyridine)₂(X)₂ and cis‐Ru(5,5′‐dicarboxy‐2,2′‐bipyridine)₂(X)₂ complexes where X = Cl^?, CN^?, and NCS^? reveal that the highest occupied molecular orbital (HOMO) of these complexes has a large amplitude on both the nonchromophoric ligand X and the central ruthenium atom. The lowest‐energy metal to ligand charge transfer (MLCT) transition in these complexes involves electron transfer from ruthenium as well as the halide/pseudohalide ligand to the polypyridyl ligand. The contribution of the halide/pseudohalide ligand(X) to the HOMO affects the total amount of charge transferred to the polypyridyl ligand and hence the photoconversion efficiency. The virtual orbitals involved in the second MLCT transition in 4,4′‐dicarboxy‐2,2′‐bipyridine complexes have higher electron density on the ? COOH group compared to the lowest unoccupied molecular orbital and hence a stronger electronic coupling with the TiO₂ surface and higher injection efficiency at shorter wavelengths. In comparison, the virtual orbitals involved in the second MLCT transition in 5,5′‐dicarboxy‐2,2′‐bipyridine complexes have lesser electron density on the ? COOH group, leading to a weaker electronic coupling with the TiO₂ surface and therefore lower efficiency for electron injection at shorter wavelengths for these complexes. © 2002 Wiley Periodicals, Inc. Int J Quantum Chem, 2002     

Direct measurement of the internal electron quasi-Fermi level in dye sensitized solar cells using a titanium secondary electrode

The spatial dependence of the electron quasi-Fermi level (QFL) in the interior of dye sensitized nanocrystalline solar cells (DSC) under short circuit conditions can be inferred from calculations based on a diffusive electron transport model. The calculations predict that the difference in the QFL between the electrolyte and contact sides of the TiO(2) layer under short circuit conditions at 1 sun could be as much as 0.5-0.7 eV. The predicted QFL profiles depend on assumptions made about energy positions, electron mobility, and the conduction band density of states. In this work, the position of the QFL at the electrolyte side of the dye sensitized TiO(2) film in a DSC has been measured using a thin passivated titanium contact deposited on top of the nanocrystalline TiO(2) by evaporation. The method allows changes in the electron QFL at all points on the IV characteristic of the cell to be monitored under dark and photostationary conditions. In addition, cells incorporating the titanium electrode can give information about the behavior of the QFL under dynamic conditions.     

Transparent graphene/PEDOT–PSS composite films as counter electrodes of dye-sensitized solar cells

Composite films of graphene and polystyreneslufonate doped poly(3,4-ethylenedioxythiophene) (graphene/PEDOT–PSS) were deposited on indium tin oxide (ITO) substrates by spin coating at room temperature and applied as counter electrodes of dye-sensitized solar cells (DSSCs). A 60 nm thick composite film (contained 1 wt% graphene) coated ITO electrode exhibited high transmittance (>80%) at visible wavelengths and high electrocatalytic activity. The energy conversion efficiency of the cell with this film as counter electrode reached 4.5%, which is comparable to 6.3% of the cell with platinum counter electrode under the same experimental condition.