Aluminum hydride cations stabilized by weakly coordinating carbaalanates

The reactions of t-BuCCLi with a mixture of AlH(3).NMe(3) and ClAlH(2).NMe(3) in boiling toluene with the addition of [t-BuCH(2)(Bzl)NMe(2)]Cl, or a bulky beta-diketimine instead, and [n-Bu(4)N]Cl led to the carbaalanates [H(2)Al(NMe(3))(2)](2)[(AlH)(8)(CCH(2)t-Bu)(6)], 3, and [n-Bu(4)N](2)[(AlH)(8)(CCH(2)t-Bu)(6)], 4, respectively. The reaction of Me(3)N.Al(CCt-Bu)(3) 5 and AlH(3).NMe(3) in boiling toluene yielded [H(n-Bu)Al(NMe(3))(2)][(AlH)(7)(AlNMe(3))(CCH(2)t-Bu)(6)], 6, in trace amounts. The single-crystal X-ray structures of 3 and 6 are reported. The compounds 3, 4, and 6 consist of well-separated ion pairs introducing carbaalanates as weakly coordinating anions and stabilizing aluminum hydride cations.     

Synthesis and characterization of thermally robust amidinato group 13 hydride complexes

The reactivity of two sterically bulky amidines, ArNC(R)N(H)Ar (Ar=2,6-diisopropylphenyl; R=H (HFiso); tBu, (HPiso)) towards LiMH4, M=Al or Ga, [AlH3(NMe3)], and [GaH3(quin)] (quin=quinuclidine) has been examined. This has given rise to a variety of very thermally stable aluminum and gallium hydride complexes. The structural motif adopted by the prepared complexes has been found to be dependent upon both the amidinate ligand and the metal involved. The 1:1 reaction of HFiso with LiAlH4 yielded dimeric [{AlH3(mu-Fiso)Li(OEt2)}2]. Amidine HFiso reacts in a 1:1 ratio with [AlH3(NMe3)] to give the unusual hydride-bridging dimeric complex, [{AlH2(Fiso)}2], in which the Fiso- ligand is nonchelating. The equivalent reaction with the bulkier amidine, HPiso, yielded a related hydride-bridging complex, [{AlH2(Piso)}2], in which the Piso- ligand is chelating. In contrast, the treatment of [GaH3(quin)] with one equivalent of HFiso afforded the four-coordinate complex [GaH2(quin)(Fiso)], in which the Fiso- ligand acts as a localized monodentate amido-imine ligand. The 2:1 reactions of HFiso with [AlH3(NMe3)] or [GaH3(quin)] gave the monomeric complexes [MH(Fiso)2], which are thermally robust and which exhibit chelating amidinate ligands. In contrast, HPiso did not give 2:1 complexes in its reactions with either of the Group 13 trihydride precursors. For sake of comparison, the reactions of [AlH3(NMe3)] and [GaH3(quin)] with the bulky carbodiimide ArN=C=NAr and the thiourea Ar(H)NC(=S)N(H)Ar were examined. These last reactions afforded the five-coordinate thioureido complexes, [MH{N(Ar)C[N(H)(Ar)]S}2], M=Al or Ga.     

Aluminum Amides Derived from Metalation of N,N'-Bis(trimethylsilyl)ethylenediamine

The reaction of N,N'-bis(trimethylsilyl)ethylenediamine with H(3)Al.NMe(3) gives products based on metalation (H(2) elimination), [{[CH(2)N(SiMe(3))](2)AlH}(2)] (1) and [{CH(2)N(SiMe(3))}(2)AlN(SiMe(3))CH(2)CH(2)N(H)SiMe(3)] (2), as well as products derived from N-Si bond cleavage and metalation, [{[CH(2)N(SiMe(3))](2)AlH}(2){HAlN(SiMe(3))CH(2)CH(2)NAlH(2)}] (4) and [H(2)Al{CH(2)N(SiMe(3))}(2)AlN(SiMe(3))CH(2)CH(2)NAl(H)(2).NMe(3)}] (5). Similarly, [Me(3)SiN(H)CH(2)CH(2)N(SiMe(3))AlCl(2)] (3) was isolated as the redistributed/metalated product from the reaction of the same diamine with H(2)Al(Cl).NMe(3). The following crystal data were obtained: (1) monoclinic, space group P2(1)/c (No. 14), a = 13.636(4) ?, b = 9.565(3) ?, c = 22.683(4) ?, beta = 105.67(2) degrees, Z = 4; (2) monoclinic, space group C2/c (No. 15), a = 31.887(3) ?, b = 10.145(6) ?, c = 17.718(3) ?, beta = 100.36(1) degrees, Z = 8; (3) triclinic, space group P&onemacr; (No. 2), a = 11.762(3) ?, b = 11.927(3) ?, c = 7.288(2) ?, alpha = 107.46(2) degrees, beta = 95.29(2) degrees, gamma = 110.41(2) degrees, Z = 2; (4) triclinic, space group P&onemacr; (No. 2), a = 13.884(4) ?, b = 15.379(4) ?, c = 11.044(2) ?, alpha = 102.11(2) degrees, beta = 103.85(2) degrees, gamma = 109.28(2) degrees, Z = 2; (5) triclinic, space group P&onemacr; (No. 2), a = 10.925(5) ?, b = 11.060(5) ?, c = 12.726(4) ?, alpha = 92.38(3) degrees, beta = 95.67(2) degrees, gamma = 96.90(2) degrees, Z = 2.     

Half-sandwich o-N,N-dimethylaminobenzyl complexes over the full size range of group 3 and lanthanide metals. synthesis, structural characterization, and catalysis of phosphine P--H bond addition to carbodiimides

The acid-base reactions between the rare-earth metal (Ln) tris(ortho-N,N-dimethylaminobenzyl) complexes [Ln(CH2C(H4NMe2-o)3] with one equivalent of the silylene-linked cyclopentadiene-amine ligand (C5Me4H)SiMe2NH(C6H2Me3-2,4,6) afforded the corresponding half-sandwich aminobenzyl complexes [{Me2Si(C5Me4)(NC6H2Me3-2,4,6)}Ln(CH2C6H4NMe2-o)(thf)] (2-Ln) (Ln=Y, La, Pr, Nd, Sm, Gd, Lu) in 60-87 % isolated yields. The one-pot reaction between ScCl(3) and [Me2Si(C5Me4)(NC6H2Me3-2,4,6)]Li2 followed by reaction with LiCH2C6H4NMe2-o in THF gave the scandium analogue [{Me2Si(C5Me4)(NC6H2Me3-2,4,6)}Sc(CH2C6H4NMe2-o)] (2-Sc) in 67 % isolated yield. 2-Sc could not be prepared by the acid-base reaction between [Sc(CH2C6H4NMe2-o)3] and (C5Me4H)SiMe2NH(C6H2Me3-2,4,6). These half-sandwich rare-earth metal aminobenzyl complexes can serve as efficient catalyst precursors for the catalytic addition of various phosphine P--H bonds to carbodiimides to form a series of phosphaguanidine derivatives with excellent tolerability to aromatic carbon-halogen bonds. A significant increase in the catalytic activity was observed, as a result of an increase in the metal size with a general trend of La>Pr, Nd>Sm>Gd>Lu>Sc. The reaction of 2-La with 1 equiv of Ph2PH yielded the corresponding phosphide complex [{Me2Si(C5Me4)(NC6H2Me3-2,4,6)}La(PPh2)(thf)2] (4), which, on recrystallization from benzene, gave the dimeric analogue [{Me2Si(C5Me4)(NC6H2Me3-2,4,6)}La(PPh2)]2 (5). Addition of 4 or 5 to iPrN=C=NiPr in THF yielded the phosphaguanidinate complex [{Me2Si(C5Me4)(NC6H2Me3-2,4,6)}La{iPrNC(PPh2)NiPr}(thf)] (6), which, on recrystallization from ether, afforded the ether-coordinated structurally characterizable analogue [{Me2Si(C5Me4)(NC6H2Me3-2,4,6)}La{iPrNC(PPh2)NiPr}(OEt2)] (7). The reaction of 6 or 7 with Ph2PH in THF yielded 4 and the phosphaguanidine iPrN=C(PPh2)NHiPr (3a). These results suggest that the catalytic formation of a phosphaguanidine compound proceeds through the nucleophilic addition of a phosphide species, which is formed by the acid-base reaction between a rare-earth metal o-dimethylaminobenzyl bond and a phosphine P--H bond, to a carbodiimide, followed by the protonolysis of the resultant phosphaguanidinate species by a phosphine P--H bond. Almost all of the rare earth complexes reported this paper were structurally characterized by X-ray diffraction studies.     

Polymorphism in Lithium Amides: A Structural and Theoretical Study. Synthesis, Mechanism, and NMR Studies of the Lithiation of N,N'-Di-tert-butylethylenediamine

The lithiation of N,N'-di-tert-butylethylenediamine by MeLi in benzene has been shown by (1)H NMR spectroscopy to proceed via the partially lithiated species [cis-{Li[&mgr;-N(t-Bu)CH(2)CH(2)N(H)t-Bu]}(2)], 2, and [{Li[N(t-Bu)CH(2)CH(2)N(H)t-Bu]}(2)Li{N(t-Bu)CH(2)CH(2)Nt-Bu}Li], 3, prior to the formation of the dilithiated species {Li[N(t-Bu)CH(2)CH(2)Nt-Bu]Li}, 4. The solid state structures of 2, 3, and a dimeric form of 4 (4a) have been determined. A sparingly soluble form of 4 (4b) has also been isolated which has a proposed polymeric ladder structure. These structures are discussed with respect to the alternatives available for the aggregation of the dilithiated species; stacking to form dimeric Li(4)N(4) cages and laddering to form Li(n)()N(n)() ladders. Ab initio molecular orbital calculations give insight into the energetics of these aggregates and the possible structures adopted by solvated and unsolvated dilithium ethylenediamide complexes. Crystals of 2 are monoclinic, of space group C2/c (No. 15), a = 19.222(7), b = 8.734(2), c = 17.149(5) ?, beta = 119.40(1) degrees, Z = 4. Crystals of 3are monoclinic, of space group P2(1)/c (No. 14), a = 9.836(8), b = 17.821(3), c = 21.78(2) ?, beta = 101.57(4) degrees, Z = 4. Crystals of 4a are monoclinic, of space group P2(1)/c (No. 14), a = 15.990(7), b = 10.0162(9), c = 16.42(1) ?, beta = 104.49(2) degrees, Z = 4. Crystals of 6 are monoclinic, of space group P2(1)/c (No. 14), a = 10.124(8), b = 17.861(3), c = 22.21(2) ?, beta = 102.05(4) degrees, Z = 4.     

Solid State Structures and Solution Dynamics of Unsolvated and Diethyl Ether Solvated Dilithium N,N'-Bis(trimethylsilyl)ethylenediamide Complexes

The lithiation of N,N'-bis(trimethylsilyl)ethylenediamine, 1, by 2 equiv of methyllithium in diethyl ether yields the dimeric diethyl ether adduct [{Li[N(SiMe(3))CH(2)CH(2)NSiMe(3)]Li.OEt(2)}(2)], 2. Recrystallization of 2 from benzene gives quantitatively the unsolvated trimer [{Li[N(SiMe(3))CH(2)CH(2)NSiMe(3)]Li}(3)], 3. The solution dynamics of 2 and 3 in toluene have been investigated using variable temperature multinuclear NMR spectroscopy. In solution, 2 is undergoing a rapid exchange process involving an equilibrium between unsolvated and diethyl ether solvated dimers, whereas compound 3 exists in a temperature dependent equilibrium of dimeric and trimeric species, of which the trimer is fluxional and exchanges inequivalent ligands by an intramolecular distortion of the Li(6)N(6) cage structure. Crystals of 2 are monoclinic, of space group P2(1)/n (No. 14), with a = 10.692(9) ?, b = 16.192(2) ?, c = 24.04(4) ?, beta = 101.16(5) degrees, V = 4083(8) ?(3), and Z = 4. Crystals of 3 are trigonal, of space group R&thremacr;m(No. 166), a = 17.765(1) ?, c = 13.394(1) ?, V = 3660.5(5) ?(3), Z = 3.     

Hydrocarbon-soluble calcium hydride: a "worker-bee" in calcium chemistry

The reactivity of the hydrocarbon-soluble calcium hydride complex [{CaH(dipp-nacnac)(thf)}(2)] (1; dipp-nacnac=CH{(CMe)(2,6-iPr(2)C(6)H(3)N)}(2)) with a large variety of substrates has been investigated. Addition of 1 to C=O and C=N functionalities gave easy access to calcium alkoxide and amide complexes. Similarly, reduction of the C[triple chemical bond]N bond in a cyanide or an isocyanide resulted in the first calcium aldimide complexes [Ca{N=C(H)R}(dipp-nacnac)] and [Ca{C(H)=NR}(dipp-nacnac)], respectively. Complexation of 1 with borane or alane Lewis acids gave the borates and alanates as contact ion pairs. In reaction with epoxides, nucleophilic ring-opening is observed as the major reaction. The high reactivity of hydrocarbon-soluble 1 with most functional groups contrasts strongly with that of insoluble CaH(2), which is essentially inert and is used as a common drying agent. Crystal structures of the following products are presented: [{Ca{OC(H)Ph(2)}(dipp-nacnac)}(2)], [{Ca{N=C(H)Ph}(dipp-nacnac)}(2)], [{Ca{C(H)=NC(Me)(2)CH(2)C(Me)(3)}(dipp-nacnac)}(2)], [{Ca{C(H)=NCy}(dipp-nacnac)}(2)], [Ca(dipp-nacnac)(thf)](+)[H(2)BC(8)H(14)](-) and [{Ca(OCy)(dipp-nacnac)}(2)]. The generally smooth and clean conversions of 1 with a variety of substrates and the stability of most intermediates against ligand exchange make 1 a valuable key precursor in the syntheses of a wide variety of beta-diketiminate calcium complexes.     

Reactions of [Et(4)N](3)[Sb{Fe(CO)(4)}(4)] with Alkyl Halides and Dihalides: Formation of the Alkyl- and the Dialkylantimony-Iron Carbonyl Complexes

The reactions of [Et(4)N](3)[Sb{Fe(CO)(4)}(4)] (1) with RX (R = Me, Et, n-Pr; X = I) in MeCN form the monoalkylated antimony complexes [Et(4)N](2)[RSb{Fe(CO)(4)}(3)] (R = Me, 2; R = Et, 4; R = n-Pr, 6) and the dialkylated antimony clusters [Et(4)N][R(2)Sb{Fe(CO)(4)}(2)] (R = Me, 3; R = Et, 5; R = n-Pr, 7), respectively. When [Et(4)N](3)[Sb{Fe(CO)(4)}(4)] reacts with i-PrI, only the monoalkylated antimony complex [Et(4)N](2)[i-PrSb{Fe(CO)(4)}(3)] (8) is obtained. The mixed dialkylantimony complex [Et(4)N][MeEtSb{Fe(CO)(4)}(2)] (9) also can be synthesized from the reaction of 2 with EtI. While the reaction with Br(CH(2))(2)Br produces [Et(4)N](2)[BrSb{Fe(CO)(4)}(3)] (10), treatment with Cl(CH(2))(3)Br forms the monoalkylated product [Et(4)N](2)[Cl(CH(2))(3)Sb{Fe(CO)(4)}(3)] (11) and a dialkylated novel antimony-iron complex [Et(4)N][{&mgr;-(CH(2))(3)}Sb{Fe(CO)(4)}(3)] (12). On the other hand, the reaction with Br(CH(2))(4)Br forms the monoalkylated antimony product and the dialkylated antimony complex [Et(4)N][{&mgr;-(CH(2))(4)}Sb{Fe(CO)(4)}(2)] (13). Complexes 2-13 are characterized by spectroscopic methods or/and X-ray analyses. On the basis of these analyses, the core of the monoalkyl clusters consists of a central antimony atom tetrahedrally bonded to one alkyl group and three Fe(CO)(4) fragments and the dialkyl products are structurally similar to the monoalkyl clusters, with the central antimony bonded to two alkyl groups and two Fe(CO)(4) moieties in each case. The dialkyl complex 3 crystallizes in the monoclinic space group P2(1)/c with a = 13.014(8) ?, b = 11.527(8) ?, c = 17.085(5) ?, beta = 105.04(3) degrees, V = 2475(2) ?(3), and Z = 4. Crystals of 12 are orthorhombic, of space group Pbca, with a = 14.791(4) ?, b = 15.555(4) ?, c = 27.118(8) ?, V = 6239(3) ?(3), and Z = 8. The anion of cluster 12 exhibits a central antimony atom bonded to three Fe(CO)(4) fragments with a -(CH(2))(3)- group bridging between the Sb atom and one Fe(CO)(4) fragment. This paper discusses the details of the reactions of [Et(4)N](3)[Sb{Fe(CO)(4)}(4)] with a series of alkyl halides and dihalides. These reactions basically proceed via a novel double-alkylation pathway, and this facile methodology can as well provide a convenient route to a series of alkylated antimony-iron carbonyl clusters.     

Synthesis of zirconium, hafnium, and tantalum complexes with sterically demanding hydrazide ligands

The bulky hydrazine t-BuN(H)NMe2 was synthesized via hydrazone and t-BuN(H)N(H)Me intermediates as the major component in a 90:5:5 mixture consisting of t-BuN(H)NMe2, t-BuN(Me)N(H)Me, and t-BuN(Me)NMe2. Reacting the mixture with n-BuLi followed by distillation and fractional crystallization led to the isolation of the ligand precursor LiN(t-Bu)NMe2. Lithium hydrazides, LiN(R)NMe2, were reacted with metal chlorides to afford the hydrazide complexes M(N(Et)NMe2)4 (M = Zr or Hf), MCl(N(R)NMe2)3 (M = Zr, R = i-Pr or t-Bu; M = Hf, R = t-Bu), and TaCl3(N(i-Pr)NMe2)2. The X-ray crystal structures of [LiN(i-Pr)NMe2]4, [LiN(t-Bu)NMe2.THF]2, ZrCl(N(R)NMe2)3 (R = i-Pr or t-Bu), and TaCl3(N(i-Pr)NMe2)2 were determined. The structural analyses revealed that the hydrazide ligands in ZrCl(N(R)NMe2)3 (R = i-Pr or t-Bu) and TaCl3(N(i-Pr)NMe2)2 are eta2 coordinated.     

Novel Organo-Substituted Cyclophosphazenes via Reaction of a Monohydro Cyclophosphazene and Acetyl Chloride

A new olefin-substituted tetrachlorocyclotri-lambda(5)-phosphazene (NPCl(2))(2)NP(i)Pr{C[OC(O)Me]=CH(2)} (4) and an unique bicyclo-lambda(5)-triphosphazene [(NPCl(2))(2)NP(i)Pr](2)C(OH)Me (5) have been prepared from the reaction of MeC(O)Cl and (NPCl(2))(2)NP(i)PrH in the presence of Et(3)N. Exclusive formation of 4 could be achieved by using an excess of both Et(3)N and MeC(O)Cl. The phosphazene rings in 5 are bridged by one carbon atom. The presence of this C(OH)Me bridge induces an asymmetric environment which renders the isopropyl ligands no longer equivalent under NMR conditions. Crystals of 4 are monoclinic, space group P2(1)/n, with a = 13.158(1) ?, b = 9.555(1) ?, c = 14.859(1) ?, beta = 115.502(6) degrees, V = 1686.1(3) ?(3), and Z = 4. Crystals of 5 are monoclinic, space group P2(1)/c, with a = 13.255(2) ?, b = 12.050(2) ?, c = 16.280(2) ?, beta = 98.91(1) degrees, V = 2568.8(7) ?(3), and Z = 4.     

Synthesis and structures of a 3-sila-beta-diketiminatomagnesium bromide, ketenimide and triflate

The crystalline compounds [Mg(Br)(L)(thf)].0.5Et2O [L = {N(R)C(C6H3Me2-2,6)}2SiR, R = SiMe3] (1), [Mg(L){N=C=C(C(Me)=CH)2CH2}(D)2] [D = NCC6H3Me2-2,6 (2), thf (3)] and [{Mg(L)}2{mu-OSO(CF3)O-[mu}2] (4) were prepared from (a) Si(Br)(R){C(C6H3Me2-2,6)=NR}2 and Mg for (1), (b) [Mg(SiR3)2(thf)2] and 2,6-Me2C6H3CN (5 mol for (2), 3 mol for (3)), and (c) (2) + Me3SiOS(O)2CF3 for (4); a coproduct from (c) is believed to have been the trimethylsilyl ketenimide Me3SiN=C=C{C(Me)=CH}2CH2 (5).     

Structural Aspects of Lithium Arenethiolate Complexes with Intramolecular Coordinating Amine Donors

Reaction of aryllithium reagents LiR (R = C(6)H(4)((R)-CH(Me)NMe(2))-2 (1a), C(6)H(3)(CH(2)NMe(2))(2)-2,6 (1b), C(6)H(4)(CH(2)N(Me)CH(2)CH(2)OMe)-2 (1c)) with 1 equiv of sulfur (1/8 S(8)) results in the quantitative formation of the corresponding lithium arenethiolates [Li{SC(6)H(4)((R)-CH(Me)NMe(2))-2}](6) (3), [Li{SC(6)H(3)(CH(2)NMe(2))(2)-2,6}](6) (4), and [Li{SC(6)H(4)(CH(2)N(Me)CH(2)CH(2)OMe)-2}](2) (5). Alternatively, 3 can be prepared by reacting the corresponding arenethiol HSC(6)H(4)((R)-CH(Me)NMe(2))-2 (2) with (n)BuLi. X-ray crystal structures of lithium arenethiolates 3 and 4, reported in abbreviated form, show them to have hexanuclear prismatic and hexanuclear planar structures, respectively, that are unprecedented in lithium thiolate chemistry. The lithium arenethiolate [Li{SC(6)H(4)(CH(2)N(Me)CH(2)CH(2)OMe)-2}](2) (5) is dimeric in the solid state and in solution, and crystals of 5 are monoclinic, space group P2(1)/c, with a = 17.7963(9) ?, b = 8.1281(7) ?, c = 17.1340(10) ?, beta = 108.288(5) degrees, Z = 4, and final R = 0.047 for 4051 reflections with F > 4sigma(F). Hexameric 4 reacts with 1 equiv of lithium iodide and 2 equiv of tetrahydrofuran to form the dinuclear adduct [Li(2)(SAr)(I)(THF)(2)] (6). Crystals of 6 are monoclinic, space group P2(1)/c, with a = 13.0346(10) ?, b = 11.523(3) ?, c = 16.127(3) ?, beta = 94.682(10) degrees, Z = 4, and final R = 0.059 for 3190 reflections with F > 4sigma(F).     

Hydrolysis studies on bismuth nitrate: synthesis and crystallization of four novel polynuclear basic bismuth nitrates

Hydrolysis of Bi(NO(3))(3) in aqueous solution gave crystals of the novel compounds [Bi(6)O(4)(OH)(4)(NO(3))(5)(H(2)O)](NO(3)) (1) and [Bi(6)O(4)(OH)(4)(NO(3))(6)(H(2)O)(2)]·H(2)O (2) among the series of hexanuclear bismuth oxido nitrates. Compounds 1 and 2 both crystallize in the monoclinic space group P2(1)/n but show significant differences in their lattice parameters: 1, a = 9.2516(6) ?, b = 13.4298(9) ?, c = 17.8471(14) ?, β = 94.531(6)°, V = 2210.5(3) ?(3); 2, a = 9.0149(3) ?, b = 16.9298(4) ?, c = 15.6864(4) ?, β = 90.129(3)°, V = 2394.06(12) ?(3). Variation of the conditions for partial hydrolysis of Bi(NO(3))(3) gave bismuth oxido nitrates of even higher nuclearity, [{Bi(38)O(45)(NO(3))(24)(DMSO)(26)}·4DMSO][{Bi(38)O(45)(NO(3))(24)(DMSO)(24)}·4DMSO] (3) and [{Bi(38)O(45)(NO(3))(24)(DMSO)(26)}·2DMSO][{Bi(38)O(45)(NO(3))(24)(DMSO)(24)}·0.5DMSO] (5), upon crystallization from DMSO. Bismuth oxido clusters 3 and 5 crystallize in the triclinic space group P1? both with two crystallographically independent molecules in the asymmetric unit. The following lattice parameters are observed: 3, a = 20.3804(10) ?, b = 20.3871(9) ?, c = 34.9715(15) ?, α = 76.657(4)°, β = 73.479(4)°, γ = 60.228(5)°, V = 12021.7(9) ?(3); 5, a = 20.0329(4) ?, b = 20.0601(4) ?, c = 34.3532(6) ?, α = 90.196(1)°, β = 91.344(2)°, γ = 119.370(2)°, V = 12025.8(4) ?(3). Differences in the number of DMSO molecules (coordinated and noncoordinated) and ligand (nitrate, DMSO) coordination modes are observed.     

Monomeric Bis(eta(2)-alkyne)copper(I) and -silver(I) Halides, Pseudohalides, and Arenethiolates

The synthesis and characterization of the complexes [(eta(5)-C(5)H(4)SiMe(3))(2)Ti(C&tbd1;CSiMe(3))(2)]MX (M = Cu, X = OTf (2), SC(6)H(5) (4), SC(6)H(4)NMe(2)-2 (5), SC(6)H(4)CH(2)NMe(2)-2 (6), S-1-C(10)H(6)NMe(2)-8 (7), Cl (8), (N&tbd1;CMe)PF(6) (9); M = Ag, X = OTf (3)) are described. These complexes contain monomeric MX entities, which are eta(2)-bonded by both alkyne functionalities of the organometallic bis(alkyne) ligand [(eta(5)-C(5)H(4)SiMe(3))(2)Ti(C&tbd1;CSiMe(3))(2)] (1). The reactions of 2 with the Lewis bases N&tbd1;CPh and N&tbd1;CC(H)=C(H)C&tbd1;N afford the cationic complexes {[(eta(5)-C(5)H(4)SiMe(3))(2)Ti(C&tbd1;CSiMe(3))(2)]Cu(N&tbd1;CPh)}OTf (10) and {[(eta(5)-C(5)H(4)SiMe(3))(2)Ti(C&tbd1;CSiMe(3))(2)]Cu}(2)(N&tbd1;CC(H)=C(H)C&tbd1;N)(OTf)(2) (11), respectively. The X-ray structures of 2, 3, and 6 have been determined. Crystals of 2 are monoclinic, space group P2(1)/c, with a = 12.8547(7) ?, b = 21.340(2) ?, c = 18.279(1) ?, beta = 133.623(5) degrees, V= 3629.7(5) ?(3), Z = 4, and final R = 0.047 for 5531 reflections with I >/= 2.5sigma(I) and 400 variables. The silver triflate complex 3 is isostructural, but not isomorphous, with the corresponding copper complex 2, and crystals of 3 are monoclinic, space group P2(1)/c, with a = 13.384(3) ?, b = 24.55(1) ?, c = 13.506(3) ?, beta = 119.21(2) degrees, V = 3873(2) ?(3), Z = 4, and final R = 0.038 for 3578 reflections with F >/= 4sigma(F) and 403 variables. Crystals of the copper arenethiolate complex 6 are triclinic, space group P&onemacr;, with a = 11.277(3) ?, b = 12.991(6) ?, c = 15.390(6) ?, alpha = 65.17(4) degrees, beta = 78.91(3) degrees, gamma = 84.78(3) degrees, V = 2008(2) ?(3), Z = 2, and final R = 0.079 for 6022 reflections and 388 variables. Complexes 2-11 all contain a monomeric bis(eta(2)-alkyne)M(eta(1)-X) unit (M = Cu, Ag) in which the group 11 metal atom is trigonally coordinated by the chelating bis(eta(2)-alkyne) entity Ti(C&tbd1;CSiMe(3))(2) and an eta(1)-bonded monoanionic ligand X. The copper arenethiolate complexes 4-7 are fluxional in solution.     

Influence of Intramolecular Coordination on the Aggregation of Sodium Phenolate Complexes. X-ray Structures of [NaOC(6)H(4)(CH(2)NMe(2))-2](6) and [Na(OC(6)H(2)(CH(2)NMe(2))(2)-2,6-Me-4)(HOC(6)H(2)(CH(2)NMe(2))(2)-2,6-Me-4)](2)

The structural characterization of two new sodium phenolate complexes, containing ortho-amino substituents, enables the influence of intramolecular coordination on the aggregation of sodium phenolate complexes to be determined. Crystals of hexameric [NaOC(6)H(4)(CH(2)NMe(2))-2](6) (1a) are monoclinic, space group P2(1)/c, with a = 11.668(4) ?, b = 18.146(4) ?, c = 14.221(5) ?, beta = 110.76(3) ?, V = 2815.5(16) ?(3), and Z = 2; R = 0.0736 for 2051 reflections with I > 2.0sigma(I). Complex 1a contains a unique Na(6)O(6) core, consisting of two face-fused cubes, with the ortho-amino substituent of each phenolate coordinating to a sodium atom. In addition, two of the phenolate ligands have an eta(2)-arene interaction with an additional sodium atom in the core. Crystals of dimeric [(NaOC(6)H(2)(CH(2)NMe(2))(2)-2,6-Me-4)(HOC(6)H(2)(CH(2)NMe(2))(2)-2,6-Me-4)](2) (2b) are triclinic, space group P&onemacr;, with a = 10.0670(8) ?, b = 10.7121(7) ?, c = 27.131(3) ?, alpha = 92.176(8) degrees, beta = 99.928(8) degrees, gamma = 106.465(6) degrees, V = 2752.1(4) ?(3), and Z = 2; R = 0.0766 for 5329 reflections with I > 2.0sigma(I). Dimeric complex 2b contains two phenolate ligands, which bridge the two sodium atoms, each coordinating with one ortho-amino substituent to a sodium atom, while the second available ortho-amino substituent remains pendant. The coordination sphere of each sodium atom is completed by a (neutral) bidentate O,N-coordinated parent phenol molecule. The second ortho-amino substituent of this neutral phenol is involved in a hydrogen bridge with its acidic hydrogen. On the basis of these two new crystal structures and previously reported solid state structures for sodium phenolate complexes, it is shown that the introduction of first one and then two ortho-amino substituents into the phenolate ligands successively lowers the degree of association of these complexes in the solid state. In this process, the basic Na(2)O(2) building block of the molecular structures remains intact.     

Catalytic addition of amine N-H bonds to carbodiimides by half-sandwich rare-earth metal complexes: efficient synthesis of substituted guanidines through amine protonolysis of rare-earth metal guanidinates

Reaction of [Ln(CH(2)SiMe(3))(3)(thf)(2)] (Ln=Y, Yb, and Lu) with one equivalent of Me(2)Si(C(5)Me(4)H)NHR' (R'=Ph, 2,4,6-Me(3)C(6)H(2), tBu) affords straightforwardly the corresponding half-sandwich rare-earth metal alkyl complexes [{Me(2)Si(C(5)Me(4))(NR')}Ln(CH(2)SiMe(3))(thf)(n)] (1: Ln = Y, R' = Ph, n=2; 2: Ln = Y, R' = C(6)H(2)Me(3)-2,4,6, n=1; 3: Ln = Y, R' = tBu, n=1; 4: Ln = Yb, R' = Ph, n=2; 5: Ln = Lu, R' = Ph, n=2) in high yields. These complexes, especially the yttrium complexes 1-3, serve as excellent catalyst precursors for the catalytic addition of various primary and secondary amines to carbodiimides, efficiently yielding a series of guanidine derivatives with a wide range of substituents on the nitrogen atoms. Functional groups such as C[triple chemical bond]N, C[triple chemical bond]CH, and aromatic C--X (X: F, Cl, Br, I) bonds can survive the catalytic reaction conditions. A primary amino group can be distinguished from a secondary one by the catalyst system, and therefore, the reaction of 1,2,3,4-tetrahydro-5-aminoisoquinoline with iPrN==C==NiPr can be achieved stepwise first at the primary amino group to selectively give the monoguanidine 38, and then at the cyclic secondary amino unit to give the biguanidine 39. Some key reaction intermediates or true catalyst species, such as the amido complexes [{Me(2)Si(C(5)Me(4))(NPh)}Y(NEt(2))(thf)(2)] (40) and [{Me(2)Si(C(5)Me(4))(NPh)}Y(NHC(6)H(4)Br-4)(thf)(2)] (42), and the guanidinate complexes [{Me(2)Si(C(5)Me(4))(NPh)}Y{iPrNC(NEt(2))(NiPr)}(thf)] (41) and [{Me(2)Si(C(5)Me(4))(NPh)}Y{iPrN}C(NC(6)H(4)Br-4)(NHiPr)}(thf)] (44) have been isolated and structurally characterized. Reactivity studies on these complexes suggest that the present catalytic formation of a guanidine compound proceeds mechanistically through nucleophilic addition of an amido species, formed by acid-base reaction between a rare-earth metal alkyl bond and an amine N--H bond, to a carbodiimide, followed by amine protonolysis of the resultant guanidinate species.     

Ruthenium complexes with tridentate PNX (X = O, S) donor ligands

The ligands, PhPNXMe (1), PhPNXPh (2), and PhPNSMe (3), (PhPNX = 2-Ph2P-C6H4CH[double bond, length as m-dash]NC6H4X-2; X = O, S) have been prepared. A range of new ruthenium complexes were synthesised using these and related ligands, namely: [{RuCl(PhPNO)}2Cl] (4), [Ru(PhPNO)2] (5), [RuCl(PhPNXR)(PPh3)]BPh4 [X = O, R = Me (6); X = O, R = Ph (7); X = S, R = Me (8)], [{RuCl(PhPNX'R)}2Cl]X [X' = O, R = Me, X = Cl(-) (9); X' = S, R = Me, X = BPh4(-) or PF6(-) (10)], and [RuCl(PhPNO-eta 6C6H5)]BPh4 (11). The catalytic activity of these complexes with respect to the hydrosilyation of acetophenone and the hydrogenation of styrene has been investigated, giving an insight into the requirements for an active complex in these reactions.     

Neutral and cationic aluminium complexes of a sterically demanding N-imidoylamidine ligand

The N-imidoylamidine ligand i-Pr2C6H3N(C(Me)NC6H3i-Pr2)2 2 was prepared. Direct reactions with AlI3 or AlMe3 afforded [(i-Pr2C6H3N(C(Me)NC6H3i-Pr2)2)AlI2][AlI4] 3 and [i-Pr2C6H3N(C(Me)NC6H3i-Pr2)2)AlMe2][AlMe4].AlMe3, 4 respectively. Thermolysis of 4 gave (i-Pr2C6H3NC(=CH2)(NC6H3i-Pr2)(C(Me)NC6H3i-Pr2)AlMe2 6. Subsequent reaction with B(C6F5)3 gave the zwitterionic species [(i-Pr2C6H3)N(C(=CH2)NC6H3i-Pr2)(C(Me)NC6H3i-Pr2)AlMe(mu-MeB(C6F5)3)] 7. In a related reactions of 2, [Ph3C][B(C6F5)4] and AlMe3, AlH3.NEtMe2 or AlD3.NMe3, the complexes [(i-Pr2C6H3N(C(Me)NC6H3i-Pr2)2)AlR2][B(C6F5)4] (R = Me 5, H 8, D 9) and [(i-Pr2C6H3)N(C(=CH2)NC6H3i-Pr2)(C(Me)NC6H3i-Pr2)AlH][B(C6F5)4] 10 are formed. Single-crystal X-ray data for 2, 3, 5 and 10 are reported.     

Reactions of tris(amino)phosphines with arylsulfonyl azides: product dependency on tris(amino)phosphine structure

The Staudinger reaction of N(CH2CH2NR)3P [R = Me (1), Pr (2)] with 1 equiv of N3SO2C6H4Me-4 gave the ionic phosphazides [N(CH2CH2NR)3PN][SO2C6H4Me-4] [R = Me (3), R = Pr (5a)], and the same reaction of 2 with N3SO2C6H2Me3-2,4,6 gave the corresponding aryl sulfinite 5b. On the other hand, the reaction of 1 with 0.5 equiv of N3SO2Ar (Ar = C6H4Me-4) furnished the novel ionic phosphazide [[N(CH2CH2NMe)3P]2(mu-N3)][SO2Ar] (6). Data that shed light on the mechanistic pathway leading to 3 were obtained by low temperature 31P NMR spectroscopy. A crystal and molecular structure analysis of the phosphazide sulfonate [N(CH2CH2NMe)3PN3][SO3C6H4Me-4] (4), obtained by atmospheric oxidation of 3, indicated an ionic structure, the cationic part of which is stabilized by a transannular P-N bond. A crystal and molecular structure analysis of 6 also indicated an ionic structure in which the cation features two untransannulated N(CH2CH2NMe)3P cages bridged by an azido group in an eta 1: mu: eta 1 fashion. The reaction of P(NMe2)3 with N3SO2Ar (Ar = C6H4Me-4) in a 1:0.5 molar ratio furnished [[(Me2N)3P]2(mu-N3)][SO2-Ar] (11) in quantitative yield. On the other hand, the same reaction involving a 1:1 molar ratio of P(NMe2)3 and N3SO2Ar produced a mixture of 11, [(Me2N)3PN3][SO2Ar] (12), and the iminophosphorane (Me2N)3P=NSO2Ar (10). In contrast, the bicyclic tris(amino)phosphines MeC(CH2NMe)3P (7) and O=P(CH2NMe)3P (8) reacted with N3SO2-Ar (Ar = C6H4Me-4) to give the iminophosphorane MeC(CH2NMe)3P=NSO2Ar (14) (structured by X-ray means) and O=P(CH2NMe)3P=NSO2Ar (16) via the intermediate phosphazides MeC(CH2NMe)3PN3SO2Ar (13) and O=P(CH2NMe)3PN3SO2Ar (15), respectively. The variety of products obtained from the reactions of arylsulfonyl azides with proazaphosphatranes (1 and 2), acyclic P(NMe2)3, bicyclic tris(amino)phosphines 7 and 8 are rationalized in terms of steric and basicity variations among the phosphorus reagents.     

Chemical and Biological Studies of Dichloro(2-((dimethylamino)methyl)phenyl)gold(III)

Several new organogold(III) derivatives of the type [AuX(2)(damp)] (damp = o-C(6)H(4)CH(2)NMe(2)) have been prepared [X = CN, SCN, dtc, or X(2) = tm; dtc = R(2)NCS(2) (R = Me (dmtc) or Et (detc)); tm = SCH(CO(2))CH(2)CO(2)Na] together with [AuCl(tpca)(damp)]Cl (tpca = o-Ph(2)PC(6)H(4)CO(2)H), [Au(dtc)(damp)]Y (Y = Cl, BPh(4)) and K[Au(CN)(3)(damp)]. The (13)C NMR spectra of these and previous derivatives have been fully assigned. In [Au(dtc)(2)(damp)] and K[Au(CN)(3)(damp)], the damp ligand is coordinated only through carbon, as shown by X-ray crystallography and/or NMR. [Au(detc)(2)(damp)] has space group C2/c, with a = 29.884(4) ?, b = 13.446(2) ?, c = 12.401(2) ?, beta = 99.45(3)(o), V = 4915 ?(3), Z = 8, and R = 0.057 for 1918 reflections. The damp and one detc ligand are monodentate, the other detc is bidentate; in solution, the complex shows dynamic behavior, with the detc ligands appearing equivalent. The crystal structure of [Au(dmtc)(damp)]BPh(4) [Pna2(1), a = 26.149(5) ?, b = 11.250(2) ?, c = 11.921(2) ?, V = 3507 ?(3), Z = 4, R = 0.073, 1772 reflections] shows both ligands to be bidentate in the cation, but the two Au-S distances are nonequivalent. The crystal structure of [Au(tm)(damp)] has also been determined [P2(1)/n, a = 18.267(7) ?, b = 9.618(3) ?, c = 18.938(4) ?, beta = 113.45(3)(o), V = 3053 ?(3), Z = 8, R = 0.079, 1389 reflections]. The tm is bound through sulfur and the carboxyl group which allows five-membered ring formation. In all three structures, the trans-influence of the sigma-bonded aryl group is apparent. [AuCl(2)(damp)] has been tested in vitroagainst a range of microbial strains and several human tumor lines, where it displays differential cytotoxicity similar to that of cisplatin. Against the ZR-75-1 human tumor xenograft, both [AuCl(2)(damp)] and cisplatin showed limited activity.