Temperature Dependence in the Synthesis of SBA-16-Type Mesoporous Silica with Pluronic F68 Block Copolymer

By adjusting the local effective surfactant packing parameter through synthesis temperature, highly ordered SBA-16-type mesoporous silica materials have been synthesized by templating with a nonionic triblock copolymer Pluronic F68 in strongly acidic conditions at temperature 30～40°C with the addition of K₂SO₄. The prepared SBA-16-type mesoporous silica materials having Im3m cubic mesostructure were proved by the well-defined x-ray diffraction patterns combined with transmission electron microscopy. Scanning electron microscopy indicated that a transformation from faced-sphere to faced-polyhedron shape morphologies could be induced with increasing of the synthesis temperature. The nitrogen adsorption–desorption analysis revealed that the mean pore size (5.50～6.13 nm) of the prepared materials increased with increasing synthesis temperature. However, when the synthesis temperature exceeded 46°C, only disordered mesoporous silca was obtained. Our synthesis strategies by adjusting the local effective surfactant packing parameter through synthesis condition, even in a narrow range, would be used not only to optimize the synthesis conditions of reported mesoporous silca, but also to fabricate new mesoporous silica materials with well-ordered channel and anticipated morphologies.     

钛硅沸石分子筛TiMCM-41的微波合成与表征

ＭＣＭ４１分子筛是一类以表面活性剂季铵碱或季铵盐为模板剂,液晶模板机理合成,孔道六方有序排列,孔径大小可在１６～１０ｎｍ范围内调节的新颖中孔硅铝分子筛材料．在多相催化、离子交换、吸附分离以及高等无机材料等领域具有较高的工程应用与学术研究价值［１］...     

钒硅MCM—41沸石分子筛微波合成与表征

以溴代十六烷基吡啶（ＣＰＢｒ）为模板剂,硅溶胶为硅源,用微波辐射的方法成功地合成出了高结晶度的中孔杂原子ＶＭＣＭ－４１分子筛,探讨了微波反应釜压力、微波晶化时间、老化时间等合成因素的影响,确定了合适的配比范围及合成条件。利用ＸＲＤ、ＴＥＭ、ＩＲ等方法对ＶＭＣＭ－４１中孔分子筛的结构作了表征,结果表明钒已进入分子筛骨架     

Preparation and characterization of novel mesoporous ceria-titania

Synthesis of a novel thermally stable mesoporous ceria-titania phase using a neutral templating route is reported. The as-made inorganic-template hybrid mesostructured matrix showed a broad low-angle XRD peak characteristic of mesoporous materials. Careful thermal treatment of the matrix allowed the subsequent densification (of the pore walls) of the inorganic component and removal of the organic component so that a high-quality mesoporous ceria-titania was formed as observed by TEM analysis. The calcined material showed the formation of fluorite type structure of CeO(2) but no crystalline titania phase was observed. The mesoporous structure remained even after high-temperature treatment. The material had high surface area after calcination up to the temperature of 973 K, with well-dispersed ceria and titania components and negligible bulk oxide formation (from XRD, UV-vis, and XPS analysis). These novel mesoporous ceria-titania materials showed high performance for the removal of volatile organic compound (toluene). The toluene removal performance was further enhanced for Pt impregnated mesoporous ceria-titania.     

溶致液晶及其在纳米结构材料合成中的应用

有序纳米结构材料是一类具有广泛应用前景的新材料,在分离、催化、传感器等领域的应用潜力巨大。近年来,利用溶致液晶模板合成纳米结构颗粒和薄膜材料的研究取得了一系列重要进展,包括新纳米结构金属和半导体材料的合成、由过渡金属水合物与表面活性剂构建的新液晶体系、溶致液晶与其它模板结合制备具有多级孔结构的新材料、影响液晶体系及纳米结构材料有序性与稳定性的关键因素、以及纳米结构形成机理等方面的内容。本文就上述几个方面的近期研究成果进行了总结与综述,并展望了利用溶致液晶模板合成纳米结构材料需要进一步深入开展的内容,有助于化学、化学工程和材料科学等领域的相关研究工作。     

Mesoporous Prussian Blue Analogues: Template‐Free Synthesis and Sodium‐Ion Battery Applications

The synthesis of mesoporous Prussian blue analogues through a template‐free methodology and the application of these mesoporous materials as high‐performance cathode materials in sodium‐ion batteries is presented. Crystalline mesostructures were produced through a synergistically coupled nanocrystal formation and aggregation mechanism. As cathodes for sodium‐ion batteries, the Prussian blue analogues all show a reversible capacity of 65 mA h g^?1 at low current rate and show excellent cycle stability. The reported method stands as an environmentally friendly and low‐cost alternative to hard or soft templating for the fabrication of mesoporous materials.     

EFFECT OF CRYSTALLIZATION TEMPERATURE ON MCM-41 SYNTHESIS

在Ｎａ２ＯＳｉＯ２ＣＴＡＢＨ２Ｏ四元水热体系中系统地考察了晶化温度对中孔ＭＣＭ４１分子筛合成及其骨架结构的影响。实验结果表明，提高晶化温度虽然能明显加快晶化速率，缩短晶化时间，但同时样品的结晶度和中孔骨架结构的有序度却被迅速破坏。这些特点与传统沸石的合成过程完全不同，其原因主要是合成ＭＣＭ４ｌ时所用的模板剂及其在合成中所起的模板作用与传统沸石完全不同。相对低的晶化温度（如１００℃）有利于高质量和高热稳定性的中孔ＭＣＭ４ｌ分子筛的合成。     

Preparation of high-surface-area zinc oxide with ordered porosity, different pore sizes, and nanocrystalline walls

Transition-metal-oxide materials possessing ordered mesoporosity have recently attracted significant research interest due to their numerous potential applications. Among them, ordered mesoporous zinc oxide (ZnO) is a very tempting material because of the importance of ZnO in heterogeneous catalysis. Here, first results of the preparation of ordered mesoporous ZnO materials by using different templates are reported. Porous materials with high surface area, different pore sizes, and nanocrystalline ZnO walls were obtained. Furthermore, we compare the two fundamental templating techniques, involving liquid crystals or ordered mesoporous carbon materials as templates. Regarding the formation of mesoporous ZnO, it was evident that the hard-matter carbon template is superior.     

Synthesis, structure, and reactivity of a new Ti-containing microporous/mesoporous material

A new class of porous, mixed phase titanosilicate materials containing a microporous TS-1 phase and a mesoporous Ti-MCM-48 phase has been successfully synthesized. A novel, one-pot synthesis method was used in which the organic templates for the mesoporous and microporous phases were added sequentially to the same reaction mixture, followed by crystallization at 150 degrees C. The gemini surfactant 18-12-18 was used to form the Ti-MCM-48 mesophase; subsequent addition of tetrapropylammonium cation (TPA+) led to the formation of TS-1. The relative amounts of the two phases within the final products were controlled by optimizing the crystallization time. Crystallization times between 12 and 50 h gave materials containing both phases, with an increasing amount of microphase formed at longer crystallization times. These materials, called "Ti-MMM-2" (microporous/mesoporous materials) were characterized using powder XRD, N2 physisorption, TEM, FTIR, DR-UV/Vis spectroscopy, and 29Si MAS NMR. In the epoxidation of cyclohexene with tert-butyl hydroperoxide (TBHP), Ti-MMM-2 samples exhibited higher catalytic activity (approximately 61%) than either TS-1 (16%) or Ti-MCM-48 (42%), with a very high selectivity (97%) for formation of cyclohexene oxide.     

Mesoporous Silica Materials Synthesized via Sol-Gel Methods Modified with Ionic Liquid and Surfactant Molecules

Mesoporous silica materials were synthesized via a sol-gel method employing a room temperature ionic liquid (1-butyl-3-methylimidazolium tetrafluoroborate, bmimBF4) as a new solvent medium and further modified with surfactant (hexadecyl-trimethyl-ammonium bromide, CTAB) as a pore templating material. The synthesized samples were characterized by the transmission electron microscopy, X-ray diffraction, and N2 adsorption-desorption techniques. The results indicated that the mesoporous silica synthesized by using bmimBF4 and CTAB as mixed templates showed better mesostructural order and smaller pore size, compared with mesoporous silica materials synthesized by using single bmimBF4 as template under the same conditions. This indicates that the presence of surfactant can affect the microstructures of silica prepared by the present synthesis method.     

Mesoporous silica spheres from colloids

A novel method has been developed to synthesize mesoporous silica spheres using commercial silica colloids (SNOWTEX) as precursors and electrolytes (ammonium nitrate and sodium chloride) as destabilizers. Crosslinked polyacrylamide hydrogel was used as a temporary barrier to obtain dispersible spherical mesoporous silica particles. The influences of synthesis conditions including solution composition and calcination temperature on the formation of the mesoporous silica particles were systematically investigated. The structure and morphology of the mesoporous silica particles were characterized via scanning electron microscopy (SEM) and N2 sorption technique. Mesoporous silica particles with particle diameters ranging from 0.5 to 1.6 microm were produced whilst the BET surface area was in the range of 31-123 m2 g-1. Their pore size could be adjusted from 14.1 to 28.8 nm by increasing the starting particle diameter from 20-30 nm up to 70-100 nm. A simple and cost effective method is reported that should open up new opportunities for the synthesis of scalable host materials with controllable structures.     

Hard-sphere packing and icosahedral assembly in the formation of mesoporous materials

We report the synthesis and characterization of a novel mesoporous material with a face-centered cubic (fcc) symmetry and intrinsic bimodal pores. Moreover, an icosahedral (ICO) mesostructure with both meso- and macroscale 5-fold symmetry is observed. We propose a hard-sphere packing (HSP) mechanism for the formation of mesoporous materials by assuming preformed robust surfactant/silicate composite micelles being hard spheres. In comparison to the conventional liquid crystal templating (LCT) or cooperative self-assembly (CSA) mechanism, our contribution provides an important advancement of knowledge in the study of mesostructured materials.     

Shape-controlled synthesis of silver crystals mediated by imidazolium-based ionic liquids

This work presents an approach toward the shape-controlled synthesis of Ag crystals with hierarchical structures by exploitation of ionic liquids (ILs) as a shape-regulating agent. The synthesis of Ag crystals involves the reduction of AgNO(3) by EG in the presence of ILs, specifically 1-butyl-3-methylimidazolium methylsulfate (bmim-MeSO(4)). In accordance with non-classical crystallization growth mechanism, the primary Ag nanoparticles were formed at the early stage of the reaction, and then self-organized into 1D or 3D Ag superstructures via an IL-mediated self-assembly process. Their final morphologies were strongly dependent on the reaction conditions such as the concentration of ILs in the reaction mixture and the reaction temperature, which suggests that ILs play an important role in controlling the shape of the Ag crystals.     

Stable Tetrahedral Aluminum Sites in Hexagonal Mesoporous Aluminosilicates

A unique templating approach for the synthesis of hexagonal mesoporous aluminosilicates via self-assembly of pre-formed aluminosilcate nacoclusters with the templating micella formed by cetyltrimethylammonium bromide (CTAB) is described ,The obtained materials of MAS-5 are hydrothermally stable,which is shown by X-ray diffraction (XRD) analysis,Further-more,as charaacterized by NMR technique ,MAS-5 has taable tetrahedral aluminum sites that is the major contributions to the acidity of aluminosilicate molecular sieve ,and on non-frame-work aluminium species in the saples was observed.     

Heterocyclic 1,3,4-oxadiazole as columnar core

The synthesis, characterization and mesomorphic properties of a new type of liquid crystalline compound, the 2,5-bis(3,4,5-trialkoxyphenyl)-1,3,4-oxadiazoles, 3a-3h, are reported. These heterocyclic compounds are derived from unsaturated 1,3,4-oxadiazole as the core group, and obtained by the condensation reaction of 3,4,5-trialkoxybenzoic acid N-(3,4,5-trialkoxybenzoyl)-hydrazides and phosphorus oxychloride in toluene under reflux. All compounds were characterized by ¹H and ¹³C NMR spectroscopy, and elemental analysis. The mesomorphic properties of these and the related compounds 1, 2 were characterized and studied by differential scanning calorimetry and polarizing optical microscopy. The formation of columnar mesophases was found to be dependent on the numbers of alkoxy sidechains. The compounds 3 exhibited hexagonal columnar (Col_h) phases, however compounds 1, 2 formed crystalline phases. Compounds 3b-3e with shorter carbon chains were room temperature liquid crystals. Polar induction by nitrogen and/or oxygen atoms on the heterocyclic core ring might be responsible for the formation and better observed mesomorphic properties in this type of compound.     

沸石分子筛合成由微孔向中孔的飞跃

介绍了沸石分子筛合成由微孔向中孔的发展及中孔分子筛的合成近况, 比较了两类材料在合成、机理及模板作用的特殊性等方面的差异。     

Cloud point curve of nonionic surfactant related to the structures of mesoporous materials

We have investigated the phase behavior of a fluorinated surfactant R(7)(F)(EO)(7) in water. The cloud point is situated at 19 degrees C for 2 wt% of surfactant. Using this surfactant, mesoporous materials have been synthesized with micellar solution prepared either at 10 degrees C (below the cloud point) or at 40 degrees C (above the cloud point). Results show that whatever the syntheses conditions, only wormhole-like structure is recovered. The effect of perfluorodecalin addition on the fluorinated surfactant/water system was also investigated. Swollen micelles, microemulsion, and lamellar (L(alpha)) liquid crystals were identified. When perfluorodecalin is added, the cloud point is shifted toward higher temperature. As regards the mesoporous syntheses, perfluorodecalin plays a dual role. First, incorporation of perfluorodecalin leads to the formation of well ordered materials. Secondly, the pore size enlargement occurs when perfluorodecalin is added. Our results evidence that the ratio between the volume of the hydrophilic headgroup (V(H)) and the hydrophobic part (V(L)) of the surfactant is not an efficiency parameter to explain the ordering improvement of mesoporous materials and that we should rather consider the existence of the cloud point curve, which disturbs the cooperative templating mechanism (CTM).     

Synthesis of Mesoporous Molecular Sieves via a Novel Templating Scheme

Since Mobil researchers reported the discovery of a new family of silica-based mesoporous molecular sieves (M41S) materials in 1992^[1,2], there has been a growing interest in using these materials as heterogeneous catalysts, catalyst supports, and nanocomposite host materials for novel applications. All these applications have stimulated many researchers to synthesize mesoporous materials via different templating schemes or synthesis pathways. So far, ionic and neutral surfactant including neutral alkylamine^[3], polyethlene oxide^[4], genimi^[5], and amphiphilic triblock copolymer^[6] have been the most commonly used as templates for the directing the formation of mesoporous.     

Effect of salts on synthesis of mesoporous materials with mixed cationic and anionic surfactants as templates

Mesoporous silica materials were synthesized using tetraеthoxysilane as precursor and liquid crystals formed in aqueous mixtures of cetyl trimethyl ammonium bromide (CTAB) and sodium dodecyl sulfate (SDS) as templates, without and with the addition of NaBr or Na₂SO₄. For this purpose, the formation of liquid crystals as a function of the ratio of CTAB and SDS under different conditions was studied. It was found that liquid crystals formed in the mixed system of CTAB and SDS at certain mixing ratios are well-structured templates for the synthesis of mesoporous silicas. The synthesized silica materials were characterized by transmission electron microscope and nitrogen adsorption/desorption analysis. The pore size of mesoporous silicas could be controlled between 3 to 6 nm by simply changing the concentration of NaBr in solution. The mesoporous silicas exhibited lamellar structure and the order of structural arrangement was promoted with addition of NaBr. However, addition of Na₂SO₄ led to ink-bottle type pores of mesoporous silica with a narrow pore size distribution of around 2 nm and a higher specific surface area of 610 m² g^–1.     

Synthesis and Characterisation of Hierarchically Structured Titanium Silicalite-1 Zeolites with Large Intracrystalline Macropores

The successful synthesis of hierarchically structured titanium silicalite-1 (TS-1) with large intracrystalline macropores by steam-assisted crystallisation of mesoporous silica particles is reported. The macropore topology was imaged in 3D by using electron tomography and synchrotron radiation-based ptychographic X-ray computed tomography, revealing interconnected macropores within the crystals accounting for about 30 % of the particle volume. The study of the macropore formation mechanism revealed that the mesoporous silica particles act as a sacrificial macropore template during the synthesis. Silicon-to-titanium ratio of the macroporous TS-1 samples was successfully tuned from 100 to 44. The hierarchically structured TS-1 exhibited high activity in the liquid phase epoxidation of 2-octene with hydrogen peroxide. The hierarchically structured TS-1 surpassed a conventional nano-sized TS-1 sample in terms of alkene conversion and showed comparable selectivity to the epoxide. The flexible synthesis route described here can be used to prepare hierarchical zeolites with improved mass transport properties for other selective oxidation reactions.