A Novel Alkene(alkyl)(aqua)(aryl)platinum(II) Complex – [Pt{CH(CH2C6F5)CH2CH2CH=CH2}(C6F5)(OH2)]

From the reaction of PtCl₂(hex) (hex = hexa‐1,5‐diene) with LiC₆F₅ in diethyl ether, the complex [Pt{CH(CH₂C₆F₅)CH₂CH₂CH=CH₂}(C₆F₅)(OH₂)] ( 1 ) was isolated. The crystal structure (monoclinic, C2/c (no. 15), Z = 8, a = 15.241(3), b = 16.579(2), c = 16.225(2) Å, β = 111.12(2)°) shows a complex with square planar coordination around platinum with a template formed 1‐pentafluorophenylhex‐5‐en‐2‐yl ligand, and C₆F₅ and aqua ligands trans to the double bond and alkyl carbon, respectively.     

Langmuir-Blodgett films of a Mo-blue nanoring [Mo(142)O(429)H(10)(H(2)O)(49)(CH(3)CO(2))(5)(CH(3)CH(2)CO(2))](30)(-) (Mo(142)) by the semiamphiphilic method

Langmuir monolayers and LB films of the ring-shaped mixed-valence polyoxomolybdate [Mo142O429H10(H2O)49(CH3CO2)5(CH3CH2CO2)](30-) (Mo142) dissolved in the aqueous subphase have been successfully fabricated by using the adsorption properties of a DODA monolayer. Infrared and ultraviolet-visible spectroscopy of the LB films indicates that Mo142 and DODA molecules are incorporated within these LB films. X-ray reflectivity experiments indicate that the LB films exhibit a well-defined lamellar structure formed by bilayers of DODA molecules alternating with monolayers of Mo142. Using behenic acid-modified hydrophobic quartz substrate is critical for the formation of the well-defined lamellar structure. From the values of the periodicity obtained by these experiments it is clear that the Mo142 clusters lie flat along the charged organic layers. AFM images also showed the flat and homogeneous films on the quartz substrates treated with behenic acid. Cyclic voltammograms of Mo142-LB films deposited on ITO substrates showed quasi-reversible oxidation/reduction waves with positive shift of the potential compared to the case of solution.     

Ab initio study of the spectroscopy of (CH3)(3)CN and (CH3)(2)CHN

Using the complete active space self-consistent field (CASSCF) method with 6-311++g(3df,3pd) basis sets, a few electronic states of nitrenes (CH3)3CN and (CH3)2CHN and their positive ions are calculated. All calculated states are valence states, and their characteristics are discussed in detail. In order to investigate the Jahn-Teller effect on (CH3)3CN radical, Cs symmetry was used for (CH3)3CN and (CH3)2CHN in the calculations. The results of our calculations (CASPT2 adiabatic excitation energies and RASSI oscillator strengths) suggest that the calculated transitions of (CH3)3CN at 27,710 cm(-1) and (CH3)2CHN at 28,110 cm(-1) are attributed to 23A' --> 13A', while those of (CH3)3CN at 28,916 cm(-1) and (CH3)2CHN at 29,316 cm(-1) are attributed to 13A' --> 13A'. The vertical and adiabatic ionization energies were obtained to compare with the photoelectron spectroscopic data. These results are in agreement with previous experimental data. Also, we present a comprehensive review on the CAS calculation results for (CH3)nCH(3-n)N (n = 0-3) presented in our previous and present papers.     

Heterobimetallic bismuth-transition metal salicylate complexes as molecular precursors for ferroelectric materials. Synthesis and structure of Bi(2)M(2)(sal)(4)(Hsal)(4)(OR) (4) (M = Nb,Ta; R = CH(2)CH(3), CH(CH(3))(2)), Bi(2)Ti(3)(sal)(8)(Hsal)(2), and Bi(2)Ti(4)(O(i)Pr)(sal)(10)(Hsal) (sal = O(2)CC(6)H(4)-2-O; Hsal = O(2)CC(6)H(4)-2-OH)

The reactions between triphenylbismuth, salicylic acid, and the metal alkoxides M(OCH(2)CH(3))(5) (M = Nb, Ta) or Ti[OCH(CH(3))(2)](4) have been investigated under different reaction conditions and in different stoichiometries. Six novel heterobimetallic bismuth alkoxy-carboxylate complexes have been synthesized in good yield as crystalline solids. These include Bi(2)M(2)(sal)(4)(Hsal)(4)(OR)(4) (M = Nb, Ta; R = CH(2)CH(3), CH(CH(3))(2)), Bi(2)Ti(3)(sal)(8)(Hsal)(2), and Bi(2)Ti(4)(O(i)Pr)(sal)(10)(Hsal) (sal = O(2)CC(6)H(4)-2-O; Hsal = O(2)CC(6)H(4)-2-OH). The complexes have been characterized spectroscopically and by single-crystal X-ray diffraction. Compounds of the group V transition metals contain metal ratios appropriate for precursors of ferroelectric materials. The molecules exhibit excellent solubility in common organic solvents and good stability against unwanted hydrolysis. The nature of the thermal decomposition of the complexes has been explored by thermogravimetric analysis and powder X-ray diffraction. We have shown that the complexes are converted to the corresponding oxide by heating in an oxygen atmosphere at 500 degrees C. The mass loss of the complexes, as indicated by thermogravimetric analysis, and the resulting unit cell parameters of the oxides are consistent with the formation of the desired heterobimetallic oxide. The complexes decomposed to form the bismuth-rich phases Bi(4)Ti(3)O(12) and Bi(5)Nb(3)O(15) as well as the expected oxides BiMO(4) (M = Nb, Ta) and Bi(2)Ti(4)O(11).     

Cd(2+) Complexation with P(CH(2)OH)(3), OP(CH(2)OH)(3), and (HOCH(2))(2)PO(2)(-): Coordination in Solution and Coordination Polymers

The coordination of Cd(2+) with P(CH(2)OH)(3) (THP) in methanol was followed by (31)P and (111)Cd NMR techniques. A cadmium-to-phosphine coordination ratio of 1:3 has been established, and effective kinetic parameters have been calculated. Air oxidation of THP in the presence of CdCl(2) at room temperature produces coordination polymer (3)(∞)[Cd(3)Cl(6)(OP(CH(2)OH)(3))(2)] (1). The same oxidation reaction at 70 °C gives another coordination polymer, (∞)[CdCl(2)(OP(CH(2)OH)(3))] (2). Complexes 1 and 2 are the first structurally characterized complexes featuring OP(CH(2)OH)(3) as a ligand that acts as a linker between Cd atoms. The addition of NaBPh(4) to the reaction mixture gives coordination polymer (∞)[Na(2)CdCl(2)(O(2)P(CH(2)OH)(2))(2)(H(2)O)(3)] (3) with (HOCH(2))(2)PO(2)(-) as the ligand. Coordination polymers 1-3 have been characterized by X-ray analysis, elemental analysis, and IR spectroscopy.     

New tetrathiapentalene-derived charge transfer salts with paramagnetic transition metal complex anion: kappa-(EDDH-TTP)(3)[Cr(phen)(NCS)(4)] x 2CH(2)Cl(2) and kappa(21)-(BDH-TTP)(5)[Cr(phen)(NCS)(4)](2) x 2CH(2)Cl(2)

The preparation, crystal structures, and optical and magnetic properties of two new charge-transfer salts kappa-(EDDH-TTP)(3)[Cr(phen)(NCS)(4)] x 2CH(2)Cl(2) (1) and kappa(21)-(BDH-TTP)(5)[Cr(phen)(NCS)(4)](2) x 2CH(2)Cl(2) (2), where phen = 1,10- phenanthroline, EDDH-TTP = 2-(4,5-ethylenedithio-1,3-dithiol-2-ylidene)-5-(1,3-dithiolan-2-ylidene)-1,3,4,6-tetrathiapentalene, and BDH-TTP = 2,5-bis(1,3-dithiolan-2-ylidene)-1,3,4,6-tetrathiapentalene, are reported. Crystal data: (1) monoclinic P2(1)/a, a = 25.0752(5) A, b = 10.6732(3) A, c = 28.1601(6) A, beta = 95.195(2) degrees, Z = 4, R = 0.0585 for 6741 independent reflections with I > 3 sigma(I); (2) monoclinic P2(1)/a, a = 23.8275(4) A, b = 9.1015 (2) A, c = 27.0420(1) A, beta = 99.9297(8) degrees, Z = 4, R = 0.0530 for 4565 independent reflections with I > 2 sigma(I). The crystal structures for both compounds consist of alternating organic and inorganic layers. The organic layer in compound 1 is characterized as kappa-type, while the organic layer in 2 resembles the kappa-type but it contains orthogonal dimers and monomers, and it is therefore called kappa(21). Compound 1 shows metallic behavior down to low temperature. Salt 2 shows semiconductive behavior, which is explained as the result of either charge ordering owing to the kappa(21)-type structure or Peierls distortion due to the one-dimensional electronic nature. However, weak metallic behavior could be observed at 10 kbar above ca. 150 K and at 15 kbar above 170 K. The magnetic susceptibilities for both compounds show Curie-Weiss behavior, showing that the exchange interactions between the magnetic anions are weak. Polarized reflectance spectra of single crystals were measured over the spectral range from 650 to 7000 cm(-1). Moreover, absorption and diffusion reflectance spectra of powdered crystals dispersed in KBr (from 400 to 7000 cm(-1)) were recorded. Vibrational and electronic features are discussed.     

Preparation of New Derivatives of the closo-Dodecaborate Anion [B12H10(OC(O)CH3){OC(O)(CH2)3CH3}]2–, [B12H10(OH){OC(O)(CH2)3CH3}]2–, [B12H10(SCN){OC(O)(CH2)3CH3}]2–, and [B12H10(I){OC(O)(CH2)3CH3}]2–

Nucleophilic substitution reactions of the monosubstituted anions [B₁₂H₁₁X]^2–, where X = OC(O)CH₃, OH, SCN, and I, with pentanoic acid were studied. The obtained compounds were shown to contain the [B₁₂H₁₀X{OC(O)(CH₂)₃CH₃}]^2– anions.     

配合物RuCl2(bdpx)(NHCH2CH2NH2)的合成及其催化活性

合成了一种新的双膦-钌-二胺配合物--RuCl2(bdpx)(NH2CH2CH2NH2)[bdpx=邻-二(二苯基膦)二甲苯](1),并研究了1催化苯乙酮(2)的加氢反应.在1 0.002 mmol,n(2):n(Me3COK):n(1)=10 000:120:1,氢气压力为3 MPa的条件下,于70℃反应4 h,2的转化率达100%.     

Direct Lanthanide-Transition Metal Interactions: Synthesis of (NH(3))(2)YbFe(CO)(4) and Crystal Structures of {[(CH(3)CN)(3)YbFe(CO)(4)](2).CH(3)CN}(infinity) and [(CH(3)CN)(3)YbFe(CO)(4)](infinity)

The heterometallic complex (NH(3))(2)YbFe(CO)(4) was prepared from the reduction of Fe(3)(CO)(12) by Yb in liquid ammonia. Ammonia was displaced from (NH(3))(2)YbFe(CO)(4) by acetonitrile in acetonitrile solution, and the crystalline compounds {[(CH(3)CN)(3)YbFe(CO)(4))](2).CH(3)CN}(infinity) and [(CH(3)CN)(3)YbFe(CO)(4)](infinity) were obtained. An earlier X-ray study of {[(CH(3)CN)(3)YbFe(CO)(4)](2).CH(3)CN}(infinity) showed that it is a ladder polymer with direct Yb-Fe bonds. In the present study, an X-ray crystal structure analysis also showed that [(CH(3)CN)(3)YbFe(CO)(4)](infinity) is a sheetlike array with direct Yb-Fe bonds. Crystal data for {[(CH(3)CN)(3)YbFe(CO)(4)](2).CH(3)CN}(infinity): monoclinic space group P2(1)/c, a = 21.515(8) ?, b = 7.838(2) ?, c = 19.866(6) ?, beta = 105.47(2) degrees, Z = 4. Crystal data for [(CH(3)CN)(3)YbFe(CO)(4)](infinity): monoclinic space group P2(1)/n, a = 8.364(3) ?, b = 9.605(5) ?, c = 17.240(6) ?, beta = 92.22(3) degrees, Z = 4. Electrical conductivity measurements in acetonitrile show that these acetonitrile complexes are partially dissociated into ionic species. IR and NMR spectra of the solutions reveal the presence of [HFe(CO)(4)](-). However, upon recrystallization, the acetonitrile complexes show no evidence for the presence of [HFe(CO)(4)](-) on the basis of their IR spectra. The solid state MAS (2)H NMR spectra of deuterated acetonitrile complexes give no evidence for [(2)HFe(CO)(4)](-). It appears that rupture of the Yb-Fe bond could occur in solution to generate the ion pair [L(n)Yb](2+)[Fe(CO)(4)](2-), but then the highly basic [Fe(CO)(4)](2-) anion could abstract a proton from a coordinated acetonitrile ligand to form [HFe(CO)(4)](-). However, upon crystallization, the proton could be transferred back to the ligand, which results in the neutral polymeric species.     

Nanoparticle MALDI-TOF mass spectrometry without fragmentation: Au25(SCH2CH2Ph)18 and mixed monolayer Au25(SCH2CH2Ph)(18-x)(L)(x)

Intact molecular ions of the organothiolate-protected nanoparticle Au25(SCH2CH2Ph)18, including their isotopic resolution, can be observed at 7391 Da as 1- and 1+ ions in negative and positive mode, respectively, by MALDI-TOF mass spectrometry when using a tactic of threshold laser pulse intensities and trans-2-[3-(4-tert-butylphenyl)-2-methyl-2-propenylidene]malononitrile (DCTB) as matrix. Previous MALDI-TOF studies of Au nanoparticles using other matrices have encountered extensive fragmentation of nanoparticle as well as thiolate ligands. Absence of fragmentation enables precise determination of the distribution of mixed monolayer compositions on nanoparticles prepared by ligand exchange reactions and by synthesis using thiol mixtures. Reaction conditions producing mixed monolayers containing only one or a small number of usefully functional ligands can be readily identified. At increased laser pulse intensity, the first fragmentation step(s) for the Au25(SCH 2CH2Ph)18 nanoparticle results in losses of AuL units and, in particular, loss of Au4(SCH2CH2Ph)4.     

Self-assembly of the octanuclear cluster [Cu8(OH)10(NH2(CH2)2CH3)12]6+ and the one-dimensional N-propylcarbamate-linked coordination polymer {[Cu(O2CNH(CH2)2CH3)(NH2(CH2)2CH3)3](ClO4)}n

The reaction of Cu(ClO4)2.6-H2O and n-propylamine in methanol gives two high-nuclearity products of well-defined compositions. At amine concentrations greater than seven equivalents compared to copper ion concentration, the system fixes carbon dioxide from air to form the one-dimensional carbamate-bridged coordination polymer, {[Cu(mu2-O,O'-O2CNH(CH2)2CH3)(NH2(CH2)2CH3)3](ClO4)}n ({1-ClO4}n). Lower relative amine concentrations lead to the self-assembly of an octanuclear copper-amine-hydroxide cluster [Cu8(OH)10(NH2(CH2)2CH3)12]6+ (2). Both compounds exhibit unique structures: {1-ClO4}n is the first mu2-O,O'-mono-N-alkylcarbamate-linked coordination polymer and 2 is the largest copper-hydroxide-monodentate amine cluster identified to date. The crystal structures indicate that the size of the n-propyl group is probably crucial for directing the formation of these compounds. Magnetic susceptibility studies indicate very weak antiferromagnetic coupling for 1. The octanuclear cluster 2 displays slightly stronger net antiferromagnetic coupling, despite the presence of a number of Cu-O(H)-Cu angles below the value of about 97 degrees that would normally be expected to yield ferromagnetic coupling.     

Theoretical study for the CH3C(O)(CH2)2OH + OH reaction

The mechanisms and the kinetics of the OH radical reaction with 4-hydroxy-2-butanone (4H2B) are investigated theoretically. Five hydrogen-abstraction channels are identified for the title reaction. The first potential energy profile of the title reaction is presented. The rate constants for each reaction channel are evaluated using transition state theory method in the temperature range of 200–1,000 K. Branching ratio of the title reaction is calculated and plotted. It is shown that the “in-plane hydrogen abstraction” from the methoxy end is the dominant channel, and the other hydrogen-abstraction channels play the minor role. The comparison between theoretical and experimental results is discussed. The three-parameter Arrhenius expression for the rate constants is also provided.     

Smectic liquid-crystalline phases of F(CF2)7(CHOH)(CH2)8H and F(CF2)9(CHOH)(CH2)10H Comparison with other partially fluorinated molecules

Partially fluorinated alcohols F(CF₂)_m(CHOH)(CH₂)_nH (where m = 7, n = 8 and m = 9, n = 10) exhibit highly ordered smectic liquid-crystalline phases, as confirmed by optical microscopy and differential scanning calorimetry. Miscibility studies show that the smectic phases of the two alcohols are not of the same type. The related partially fluorinated ketones F(CF₂)_mCO(CH₂)_nH do not form a detectable mesophase. This is rather surprising since the (more polar) corresponding alcohols and the (less polar) analogous iodides and n-alkanes do. A brief discussion of the results and a comparison among partially fluorinated alkanes with various functional groups are presented.     

Rhenium Polyhydride Complexes Containing PhP(CH(2)CH(2)CH(2)PCy(2))(2) (Cyttp): Protonation, Insertion, and Ligand Substitution Reactions of ReH(5)(Cyttp) and Structural Characterization of ReH(5)(Cyttp) and [ReH(4)(eta(2)-H(2))(Cyttp)]SbF(6)

Several new polyhydride complexes of rhenium containing the tridentate phosphine PhP(CH(2)CH(2)CH(2)PCy(2))(2) (Cyttp) were synthesized and characterized by (1)H and (31)P{(1)H} NMR and IR spectroscopy. The solid state structure of the previously reported ReH(5)(Cyttp) (1) was determined by X-ray crystallography. 1 crystallizes in the space group P2(1)/m with the following unit cell parameters: a = 8.582(2) ?, b = 19.690(2) ?, c = 10.800(2) ?, beta = 95.57(1) degrees, and Z = 2. The molecule adopts a classical polyhydride, triangulated dodecahedral structure, with the three phosphorus atoms and one hydrogen atom occupying the B sites, and the remaining hydrogen atoms occupying the A sites. 1 is protonated by HSbF(6) (or HBF(4)) to yield [ReH(4)(eta(2)-H(2))(Cyttp)]SbF(6) (3), which was shown by X-ray diffraction techniques (space group P&onemacr;, unit cell parameters: a = 9.874(2) ?, b = 14.242(4) ?, c = 16.198(2) ?, alpha = 99.12(2) degrees, beta = 98.85(2) degrees, gamma = 109.42(2) degrees, and Z = 2) to contain a nonclassical polyhydride cation with a triangulated dodecahedral structure in the solid. The same structure is suggested in solution by (1)H NMR data (including T(1) measurements). 3 is inert to loss of H(2) and is unaffected by CO, t-BuNC, and P(OMe)(3) at room temperature. In contrast, 1 reacts with a variety of reagents to afford classical tetrahydride complexes which are thought also to possess a triangulated dodecahedral structure, with the hydrogens in the A sites, from spectroscopic evidence. Accordingly, CS(2), p-O(2)NC(6)H(4)NCS, and EtOC(O)NCS (X=C=S) insert into an Re-H bond to yield ReH(4)(SCH=X)(Cyttp) (5-7, respectively). MeI cleaves one Re-H bond to afford ReH(4)I(Cyttp) (8), and [C(7)H(7)]BF(4) abstracts hydride in the presence of MeCN, t-BuNC, CyNC, or P(OMe)(3) (L) to give [ReH(4)L(Cyttp)]BF(4) (9-12, respectively). A related pentahydride, ReH(5)(ttp) (2, ttp = PhP(CH(2)CH(2)CH(2)PPh(2))(2)), also reacts with HSbF(6) to yield [ReH(6)(ttp)]SbF(6) (4), which appears to be a nonclassical polyhydride in solution by T(1) measurements.     

Packing density of HS(CH2)(n)COOH self-assembled monolayers

Self-assembled monolayers (SAMs) of HS(CH(2))(n)COOH, n = 5, 10, 15 deposited from ethanol solution onto gold are prepared by five approaches, and their packing densities are evaluated by X-ray photoelectron spectroscopy (XPS) measurements. The five approaches are: (1) direct deposition; (2) acetic-acid-assisted deposition; (3) butyl-amine-assisted deposition; (4) displacement of a preformed HS(CH(2))(n)CH(3) (n = 5, 10, 15) SAMs; and (5) co-deposition with HS(CH(2))(n)CH(3) (n = 5, 10, 15). Packing density metrics are calculated from measurements of SAM and substrate photoemission intensities and their attenuations by two methods. In one case the attenuated photoemissions are expressed as a ratio relative to comparable measurements on an experimental HS(CH(2))(n)CH(3) model system. In the other case a new method is introduced where a calculated attenuation based on theoretical random coil and extended chain models is used as the reference to determine a packing density fraction. Packing densities are also correlated with the S2p(Au-bonded):Au4f peak area ratios and with shifts in the C1s binding energies. SAMs prepared by the direct deposition are a partial multilayer where a second molecular layer is physisorbed onto the SAM and not removable by solvent washing. The addition of acetic acid to the deposition solution disrupts dimer associations of HS(CH(2))(n)COOH in solution and at the surface of the monolayer and yields the most ordered monolayer with the highest density of -COOH groups. The addition of butyl amine results in a labile ammonium carbonate ion pair formation but results in a lower packing density in the SAM. The displacement of the preformed HS(CH(2))(n)CH(3) SAM and the co-deposition of HS(CH(2))(n)CH(3) with HS(CH(2))(n)COOH result in SAMs with little incorporation of the -COOH component.