Effect of Heating Rate on Crystallization Kinetics of Amorphous Al91La5Ni4 Alloys by DSC

Crystallization kinetics of Al₉₁La₅Ni₄ amorphous ribbons produced by a melt-spinning method were studied by DSC analysis and X-ray diffraction. The effect of heating rate (from 4 to 200°C min^-1) was investigated in the temperature range from 298 to 700 K. Increases the heating rate from 4 to 200°C min^-1 resulted in increases of the temperature difference between the two stages of the transformation process: crystallization of Al and crystallization of the Al compounds from 148.9 to 167.4 K. The apparent activation energies for the first step, related to Al crystallization, and to the second step related to crystallization of Al₄La and Al₃Ni, were found to be 161±9 and 199±10 kJ mol^-1, respectively. The results indicate the possibility of tailoring the heating treatment to produce the required fraction of the amorphous phase. This revised version was published online in July 2006 with corrections to the Cover Date.     

Effects of Deformation Rate on the Necking of an Amorphous Copolyester Studied by Modulated DSC

The tensile loading-induced necking in notched specimens of an amorphous copolyester (aCOP) was studied by modulated differential scanning calorimetry (MDSC). It was shown that necking occurred by cold drawing since the enthalpy of cold crystallization and that of the subsequent melting agreed fairly with each other. Increasing deformation in the necking zone and increasing deformation rate of the specimens shifted the onset of cold crystallization toward lower temperatures and yielded a slightly higher glass transition temperature (T_g). This was attributed to the molecular orientation caused by mechanical loading. The finding that the melting contained a non-reversing part was considered as appearance of possible microcrystallinity. The T_g range was strongly influenced by the deformation rate and reflects the thermomechanical history of the samples accordingly. This revised version was published online in August 2006 with corrections to the Cover Date.     

Influence of Pore Structure on Catalytic Properties of Mesoporous Silica-supported Co-B Amorphous Alloys in Hydrogenation of Cinnamaldehyde to Cinnamyl Alcohol

Co‐B amorphous alloy catalysts supported on three kinds of mesoporous silica (common SiO₂, MCM‐41 and SBA‐15) have been systematically studied focusing on the effect of pore structure on the catalytic properties in liquid‐phase hydrogenation of cinnamaldehyde to cinnamyl alcohol (CMO). Structural characterization of a series of different catalysts was performed by means of N₂ adsorption, X‐ray diffraction, transmission electron microscopy, hydrogen chemisorption, and X‐ray photoelectron spectroscopy. Various characterizations revealed that the pore structure of supports profoundly influenced the particle size, location and dispersion degree of Co‐B amorphous alloys. Co‐B/SBA‐15 was found more active and selective to CMO than either Co‐B/SiO₂ or Co‐B/MCM‐41. The superior catalytic activity could be attributed to the higher active surface area, because most of Co‐B nanoparticles in Co‐B/SBA‐15 were located in the ordered pore channels of SBA‐15 rather than on the external surface as found in Co‐B/SiO₂ and Co‐B/MCM‐41. Meanwhile, the geometrical confinement effect of the ordered mesoporous structure of SBA‐15 was considered to be responsible for the enhanced selectivity to CMO on Co‐B/SBA‐15, inhibiting the further hydrogenation of CMO to hydrocinnamyl alcohol.     

State of the Cu electrode surface studied by X-ray photoelectron and Auger spectroscopies

Annealing of the copper plate in flame was found (by XPS and X-ray Auger spectroscopy) to enrich the surface copper layers in oxygen in the forms of Cu₂O and adsorbed oxygen. The changes in the surface layers of the copper cathode due to annealing can be the origin of the earlier found enhancement of its activity in the electrocatalytic hydrogenation of citral and trans-2-allyl-6-R-1,2,3,6-tetrahydropyridines (R = Me, All, Ph). This method of the copper electrode pre-treatment provides its long durability, an insignificant decrease in the electrocatalytic activity in time, and the reproducibility of the electrocatalytic hydrogenation of unsaturated organic compounds.     

Effects of Neodymium on the Properties of Ni‐B/CNTs Amorphous Alloy Catalyst

Neodymium is used as a promoter of Ni‐B/CNTs amorphous alloy catalyst to modify its catalytic properties. Ni‐B/CNTs and Ni‐Nd(5wt%)‐B/CNTs catalysts were prepared by the impregnation chemical reduction method. Their catalytic performances were examined in acetylene selective hydrogenation, which is a crucial step in industrial polymerization processes, with the aim of the complete elimination of alkynes from alkene feedstocks. Experiments showed that the latter exhibited higher acetylene hydrogenation activity but lower ethylene selectivity. Catalysts were characterized by ICP, CO‐chemisorption, XPS, XRD and H₂‐TPD techniques. On the basis of characterizations, the modification of Nd on Ni‐B/CNTs catalyst was related to its geometric and electronic effects.     

用XPS和H2化学吸附研究钝化Mo2N的还原作用

作为催化新材料，高比表面的Mo2N的催化特性已经引起催化科学家的极大关注［1，2］．在加氢反应中，Mo2N表现出很高的活性，类似贵金属催化剂．在加氢精制反应中，发现高比表面Mo2N对含杂原子的环加氢和脱除杂原子具有较高的选择性，而对芳香环加氢活性较低［2，3］．高比表面的Mo2N通常是由MoO3和NH3（或H2／N2混合气）反应得到，新鲜Mo2N很活泼，一接触空气就发生燃烧，导致催化剂烧结，其表面积大大降低．一般情况下，为了研究过程中样品处理方便，合成后的新鲜Mo2N需经过钝化处理．在钝化过程中，Mo2N表面会吸附氧，这种表面吸…     

采用XPS与接触角法研究氟聚合物表面结构与性能

本文采用接触角和变角XPS方法对FA共聚物的表面能、 表面微相结构做了进一步的研究.     

Sulfur Compounds. 164 Thermal Polymerization of the Cyclic Seleniumsulfide 1,2-Se2S5 Studied by DSC,HPLC, Raman Spectroscopy,and X-Ray Diffraction

Solid 1,2-Se₂S₅ polymerizes endothermically at 47°C to give a linear polymer which after stretching and extraction consists of helical molecules similar to those of polymeric sulfur. Heating of the polymer results in slow exothermic depolymerization at 84°C to give a mixture of seven cyclic Se_nS_8–n molecules which melts at 111°C. When the polymeric Se₂S₅ is refluxed with CS₂ the initial depolymerization Products are 1,2-Se₂S₅, SeS₅ and 1,2,3-Se₃S₅ but in addition SeS₇ and 1,2-Se₂S₆ are formed. These results indicate the atomic sequence –Se? S₅? Se– in the polymer. The powder x-ray diffraction pattern and Raman spectrum of the polymer as well as its lattice parameters are reported and the Probable mechanism of its depolymerization is discussed.     

Analysis of the antitarnish film on a tin surface by x-ray photoelectron spectroscopy and Auger electron spectroscopy

A corrosion-resistant complex film formed in ethylenediaminetetra(methylidenephosphonic acid) (EDTMP) solution was determined by x-ray photoelectron spectroscopy and Auger electron spectroscopy to consist of 48.0% O, 11.7% Sn, 7.7% N, 22.1% C and 10.5% P. From the differences in the binding energies of Sn, N and O before and after film formation and the RPO^2?₃ and SnN vibrations in the Raman spectrum of the film, it was deduced that N and O in EDTMP were coordinated with Sn in the film.     

Effects of X-ray radiation on the surface chemical composition of plasma deposited thin fluorocarbon films

Different thin fluorocarbon (FC) films were deposited on Si(111) using plasma polymerisation and then exposed to X-ray radiation. Changes in the chemical composition of the deposited fluorocarbon films as a function of irradiation time were investigated in situ using X-ray photoelectron spectroscopy. The evaluation of the C1s and F1s core level induced emission as a function of exposure to X-ray radiation (Mg Kα, hν = 1253.6 eV) reveals changes in the surface chemical composition of the FC polymer structure. The presented results indicate a high defluorination under X-ray irradiation. Additionally, binding energy shifts of the F1s and C1s peaks during the exposure associated with surface charging effects were observed. With ongoing exposure the surface charging decreases continuously and the FC surfaces become more conductive due to changes in the polymer structure. Different models have been used to describe the decomposition kinetics and surface composition.     

电沉积条件对非晶态Fe-Mo合金结构及表面性质的影响

利用XRD、SEM和XPS等手段研究了电解液中x(Mo)(Mo在Mo+Fe中的摩尔分数)、电流密度及温度变化对电沉积非晶态Fe-Mo合金的结构和表面性质的影响.溶液中主要含有FeSO₄、Na₂MoO₄、H₃Cit和NaCl,pH值3～5.当x(Mo)大于50%,电流密度高于25mA/cm²,温度低于40℃时有利于形成非晶态结构.合金沉积层的表面呈颗粒状且有微裂纹,表面的化学性质很活泼,容易形成含低价Mo的有色氧化物表面膜.非晶Fe-Mo合金沉积层在3%NaCl溶液中的耐蚀性优于纯铁.     

轻稀土氧化物对非晶态NiB合金催化剂的改性研究

采用脉冲技术以气相苯加氢为探针反应,首次研究了轻稀土元素Ｃｅ,Ｐｒ,Ｎｄ对化学还原法制备的非晶态ＮｉＢ合金催化剂遥加氢及抗硫性能的影响。用ＸＲＤ鉴定结构,用ＤＳＣ测定晶化温度;并用吸附ＣＯ,ＴＰＲ,ＴＰＤ等手段表征了轻稀土对非晶态ＮｉＢ合金催化剂表面性质的影响。     

DSC Studies of the Effects of Cisplatin and Transplatin on G-Actin

The effects of cisplatin and its trans isomer transplatin on the thermal denaturation of G-actin were studied with a Micro DSC-III differential scanning calorimeter. The denaturation enthalpy of G-actin was found to be 12 J g^–1, and the denaturation temperature was 328 K. The thermal denaturation curve showed that increasing cisplatin concentration decreased the enthalpy change. However, after the ratio of cisplatin to G-actin attained 8:1 (mol:mol), the denaturation enthalpy no longer decreased. Transplatin decreased the enthalpy change more rapidly. In contrast with cisplatin, the denaturation peak at 328 K disappeared, and a strong exothermic peak appeared at 341 K when the ratio of transplatin to G-actin was 8:1 (mol:mol). The enthalpy change was 75 J g^–1, which is far in excess of the range of weak interactions. This strong exothermic phenomenon probably reflects the agglutination of protein. The effects of cisplatin and transplatin on the number of the free thiol groups of G-actin are discussed.This revised version was published online in November 2005 with corrections to the Cover Date.     

Cellulose synthesized by Acetobacter xylinum in the presence of plant cell wall polysaccharides

Acetobacter xylinum was cultured in Schramm–Hestrin (SH) medium containing glucuronoxylan (xylan medium) or pectin (pectin medium). Loose bundles of cellulose microfibrils were formed in the xylan medium. In contrast the cellulose ribbons formed in the pectin medium were the same as those normally formed in SH medium.The periodic acidthiocarbohydrazidesilver proteinate method indicated that positive reacted substances located along cellulose microfibrils formed in both mediums. Freeze-fracture and deepetching electron microscopy also revealed that polysaccharides exist around cellulose microfibrils. X-ray diffractometry and Fourier Transform In-frared spectroscopy demonstrated that the addition of xylan induced a change in the ratio of cellulose I and I. Electron diffraction analysis revealed that xylan discontinuously affected the crystalline structure of cellulose microfibrils. Pectin did not have this effect. Glucuronoxylan in the medium prevented the assembly of cellulose     

Effects of High-voltage Pulse Electric Field Treatment on the Structure Stability of Konjac Glucomannan

Structures of KGM treated in two high-voltage pulse electric fields were characterized by infrared spectroscopy,Raman spectroscopy,X-ray diffraction and so on.The results showed that intermolecular hydrogen bonding interactions of KGM were reduced after being treated with high-voltage pulse electric field,but there was no significant effect on its fiber chain form and thermal characteristics.Results of the study can provide a useful reference for further study on the structure and property of KGM,and especially can provide theoretical basis for the effect of physical field on the foodstuff deep processing related to KGM.     

Ligand Effects on the Electronic Structure of Heteroleptic Antimony‐Centered Radicals

We report on the structures of three unprecedented heteroleptic Sb‐centered radicals [L(Cl)Ga](R)Sb^. ( 2‐R , R=B[N(Dip)CH]₂ 2‐B , 2,6‐Mes₂C₆H₃ 2‐C , N(SiMe₃)Dip 2‐N ) stabilized by one electropositive metal fragment [L(Cl)Ga] (L=HC[C(Me)N(Dip)]₂, Dip=2,6‐i‐Pr₂C₆H₃) and one bulky B‐ ( 2‐B ), C‐ ( 2‐C ), or N‐based ( 2‐N ) substituent. Compounds 2‐R are predominantly metal‐centered radicals. Their electronic properties are largely influenced by the electronic nature of the ligands R, and significant delocalization of unpaired‐spin density onto the ligands was observed in 2‐B and 2‐N . Cyclic voltammetry (CV) studies showed that 2‐B undergoes a quasi‐reversible one‐electron reduction, which was confirmed by the synthesis of [K([2.2.2]crypt)][L(Cl)GaSbB[N(Dip)CH]₂] ([K([2.2.2]crypt)][ 2‐B ]) containing the stibanyl anion [ 2‐B ]^?, which was shown to possess significant Sb?B multiple‐bonding character.     

Investigation of structural changes in semi-crystalline polymers during deformation by synchrotron X-ray scattering

The mechanical behavior of polymer materials is strongly dependent on polymer structure and morphology of the material. The latter is determined mainly by processing and thermal history. Temperature-dependent on-line X-ray scattering during deformation enables the investigation of deformation processes, fatigue and failure of polymers. As an example, investigations on polypropylene are presented. By on-line X-ray scattering with synchrotron radiation, a time resolution in the order of seconds and a spatial resolution in the order of microns can be achieved. The characterization of the crystalline and amorphous phases as well as the study of cavitation processes were performed by simultaneous SAXS and WAXS. The results of scattering experiments are complemented by DSC measurements and SEM investigations. © 2010 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 48: 1574–1586, 2010     

氧化层结构对铀在CO/H2气氛中表面反应的影响

用Ｘ射线光电子能谱分析研究了不同氧化层结构的铀金属试样在ＣＯ和Ｈ２氢气保的表面反应。ＣＯ和Ｈ２与铀金属表层反应后，氧化物中氧含量均减少，Ｏ／Ｕ比值随气体乾气量的增加而减少。     

Study on the anti‐reflection and structure evolution of hydrogenated amorphous carbon grown by plasma chemical vapor deposition

In this work, the interrelation between the anti‐reflective property and the component, especially the sp² content, was studied. The results showed that the refraction index n increased from 2.2 to 3.3 with the direct current negative bias increasing. The reflection result R successful fall by 11.9% because of the existence of hydrogenated amorphous carbon anti‐reflective coatings. Both the refraction index and reflectivity decreasing correspond to a more graphitic microstructure character. Moreover, the optical property evolution of the films was explained by the chemical vapor deposition mechanism based on the ion sub‐plantation model and two‐phase model. Copyright © 2014 John Wiley & Sons, Ltd.     

B(OCH3)3电子结构的Hel紫外光电子能谱研究

人们知道，Hel紫外光电子能借（PES）提供研究分子轨道能量、能级次序、成键类型以及由光电子峰强度所反映的电离轨道特性等信息是其他手段没有的，因而PES技术已广泛地用于众多化合物分子电子结构的研究中．有机础化合物由于它们高的反应活性作为合成试剂而信受人们重视［‘－