Extraction-chromatographic determination of sulfonated azo dyes in aqueous solutions

The extraction of sulfonated azo dyes E102, E110, E122, E124, and E129 from aqueous solutions using hydrophilic solvents and their mixtures in the presence of a salting-out agent (ammonium sulphate) has been studied. Some regularities of extraction have been revealed. The composition of the mobile phase has been optimized and a procedure has been proposed for the identification and determination of the dyes in aqueous solutions by thin-layer chromatography in concentrations of 0.1–0.01 μg/L. An office scanner and a personal computer have been used to process the results of the separate determination of the dyes.     

Sorption of azo dyes from aqueous solutions by tetradodecyloxybenzylcalix[4]resorcinarene derivatives

Four water-insoluble tetradodecyloxybenzylcalix[4]resorcinarenes with various functional groups at the upper macrocycle rim (unsubstituted calix[4]resorcinarene 1, carboxylic acid derivative 2, ethyl ester derivative 3 and aminoethylamide derivative 4) were synthesized and tested as sorbents for water-soluble azo dyes methyl orange (MO), acid orange 5 (AO 5) and congo red (CR) by solid–liquid extraction method without background electrolyte. It was observed that the sorption of azo dyes reaches 99% for sorbent 4, which is partial protonated in contact with water and becomes able to electrostatic interactions with the dyes. It was demonstrates that calixresorcinarene 4 has the excellent sorption capacity for AO5 (130.5?mg dye per g of sorbent) due to effective calixresorcinarene—dye association in equal molar ratio mode.     

Oxidation of benzene by ozone in aqueous solutions

The rates of reaction between benzene and ozone were measured at temperatures varying from 5 to 35 °C in aqueous solutions in the pH range 3–7 utilizing the stopped-flow technique. The ozonation reaction was one-half order with respect to the concentration of both ozone and benzene in acidic solutions. In neutral solutions, however, the reaction was first order in ozone concentration and nearly independent of benzene concentration. At 25 °C the half-life of the reaction decreased from about 20 to less than 0.2 s and the first-order rate constant increased from 0.012 to 12.2 s⁻¹ as the pH value of the solutions increased from 3 to 7.Both benzoquinone (p-quinone) and hydroquinone (1,4-dihydroxybenzene) were formed in the neutral solutions as detected with a gas chromatograph. In the acidic solutions, however, only benzoquinone was found. The activation energies at pH values of 3 and 7 respectively were estimated to be 20.9 and 3.3 kcal mol⁻¹. A shift in the mechanism of the reaction is suggested by the results.     

Investigating the halochromic properties of azo dyes in an aqueous environment by using a combined experimental and theoretical approach

The halochromism in solution of a prototypical example of an azo dye, ethyl orange, was investigated by using a combined theoretical and experimental approach. Experimental UV/Vis and Raman spectroscopy pointed towards a structural change of the azo dye with changing pH value (in the range pH?5-3). The pH-sensitive behavior was modeled through a series of ab initio computations on the neutral and various singly and doubly protonated structures. For this purpose, contemporary DFT functionals (B3LYP, CAM-B3LYP, and M06) were used in combination with implicit modeling of the water solvent environment. Static calculations were successful in assigning the most-probable protonation site. However, to fully understand the origin of the main absorption peaks, a molecular dynamics simulation study in a water molecular environment was used in combination with time-dependent DFT (TD-DFT) calculations to deduce average UV/Vis spectra that take into account the flexibility of the dye and the explicit interactions with the surrounding water molecules. This procedure allowed us to achieve a remarkable agreement between the theoretical and experimental UV/Vis spectrum and enabled us to fully unravel the pH-sensitive behavior of ethyl orange in aqueous environment.     

Photocatalytic degradation of azo dyes in aqueous solutions under UV irradiation using nano-strontium titanate as the nanophotocatalyst

Research on photocatalytic degradation rate of azo dyes using nano-strontium titanate in photocatalysis process was the main goal of present study. In this regard, the influence of the main operating parameters such a photocatalyst concentration, dye concentration, temperature, pH and the presence of hydrogen peroxide upon dye removal rate under UV irradiation was studied. The absorbance of samples was measured by a UV–Vis spectrophotometer. The structure and morphology of nano-powder were investigated using scanning electron microscopy and crystalline structure by X-ray diffraction spectroscopy. The results reveal that nano-strontium titanate has high and significant photocatalytic activity and in comparison with nano-titanium dioxide was superior photocatalyst.     

Spectrophotometric determination of aqueous acidity constants of three azo dyes

The two successive steps acidity constants of three azo dye derivatives D1–D3, were determined by a spectrophotometric method using 0.10 M KNO₃ as supporting electrolyte in water solvent. The electronic spectra of the compounds were recorded in the course of their pH-metric titration with a standard base solution. The protolytic equilibrium constants can be solved very satisfactorily from absorbance data, by combining the data obtained in the spectrometric determinations with graphic methods as the absorbance diagrams. An A-diagram shows the relative absorbance changes at two wavelengths as a function of the pH. For a one-step system, the absorbance at any wavelength must be proportional to the absorbance at any other wavelength, so an A-diagram for all wavelength combinations for such a system must be linear (rank, s=1). However, if a system is governed by two or more equilibria, the A-diagrams corresponding to multi-step titrations will change direction every time a new equilibrium becomes dominant in the system. Analysis of the each uniform sub-region can then be used in evaluating of the corresponding equilibrium. A-diagrams for all wavelength combinations suggest that these systems have the rank two(s=2). The results revealed that the K_a(1) and K_a(2) values of different azo dyes follow the order D3>D2>D1.      

Oxidation rate of saturated hydrocarbons by permanganate in aqueous solutions

Conclusions The reaction for the oxidation of alkanes in aqueous permanganate solutions is first order in both substrate and oxidizing agent. The reaction rate constants were measured for a number of C₃-C₇ normal, iso-, and cycloalkanes. The normal type of selectivity is fulfilled: the tertiary C-H bonds are more active, while the primary C-H bonds are less active than the secondary C-H bonds.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 7, pp. 1654–1656, July, 1982.     

Oxidation of atrazine by photoactivated potassium persulfate in aqueous solutions

General laws of the photochemical oxidation of atrazine by inorganic peroxo compounds under the impact of solar radiation are studied. It is found that almost complete conversion of atrazine can be achieved via photochemical oxidation with persulfate after 120 min, but no deep mineralization is observed. The effect an aqueous matrix has on the processes of atrazine degradation in combined oxidation systems is considered.     

Oxidation of thiol compounds by molecular oxygen in aqueous solutions

Side self-oxidation of thiols was studied. It was found that these reactions in neutral and alkaline solutions are induced by impurities of variable-valence metals. The ability of transition metals to catalyze oxidation of thiols changes in the order Cu > Mn > Fe > Ni Co. The plot of the self-oxidation rate vs. pH passes through a maximum whose position on the pH scale depends on both the nature of metal and the structure of the thiol oxidized. For thiols having different structures, the kinetic orders in reactions catalyzed by copper ions differently vary with pH, which is apparently associated with the formation of complexes possessing different catalytic activity.     

Oxidation of azo dyes with inorganic peroxides in the presence of cationic surfactants

Degradation of Direct Red 23, Rective Red 45, and Orange II azo dyes with hydrogen peroxide and hydroperite in the presence of cationic surfactants alkyldimethylbenzylammonium chloride (Katamin AB) and cetyltrimethylammonium chloride and without them was studied by spectrophotometry. The reactivity of the azo dyes was correlated with their chemical structure.     

Extraction of azo dyes by polyurethane foam

The extraction of 12 closely related mono-azo dyes by polyester and polyether-type polyurethane foams was studied to gain more information regarding the mechanism of the extraction of organic compounds. The effects on extraction of solution pH, dye concentration and salt concentration were investigated. It was found that the extraction of the dyes involved a neutral zwitterionic species and is highly dependent on the parameters studied. The dependency of the extraction on these parameters can be explained in a manner consistent with solvent extraction; however, the dual-mode sorption mechanism seems a more likely model. This mechanism involves both absorption related to solvent extraction, and an added component for surface adsorption. While the dual-mode sorption model explains the observed extraction behaviour, the data suggest that surface adsorption plays a much larger role than previously considered.     

Removal of cationic dyes by poly(acrylamide-co-acrylic acid) hydrogels in aqueous solutions

Poly(acrylamide-co-acrylic acid (poly(AAm-co-AAc)) hydrogels prepared by irradiating with γ-radiation were used in experiments on swelling, diffusion, and uptake of some cationic dyes such as Safranine-O (SO) and Magenta (M). Poly(AAm-co-AAc) hydrogels irradiated at 8.0 kGy have been used for swelling and diffusion studies in water and cationic dye solutions. The maximum swellings in water, and SO, and M solutions observed are 2700%, 3500%, and 4000%, respectively. Diffusions of water and cationic dyes within hydrogels have been found to be non-Fickian in character. Adsorption of the cationic dyes onto poly(AAm-co-AAc) hydrogels is studied by the batch adsorption technique. The adsorption type was found Langmuir type in the Giles classification system. The moles of adsorbed dye for SO and M per repeating unit in hydrogel (binding ratio, r) have been calculated as 3834×10⁻⁶ and 1323×10⁻⁶, respectively. These results show that poly(AAm-co-AAc) hydrogels can be used as adsorbent for water pollutants such as cationic dyes.     

Phycocyanin-sensitized photoreduction of azo dyes

Abstract— Phycocyanin can sensitize the photobleaching of azo dyes in a reaction which is analogous to one sensitized by chlorophyll. The quantum yield of the phycocyanin-sensitized photobleaching of congo red is low compared to the analogous reaction as sensitized by chlorophyll in aqueous pyridine. A kinetic mechanism for the former reaction is proposed and it was found that the manner in which phycocyanin sensitizes photoreduction of azo dyes is in several respects similar to that proposed for chlorophyll.     

Adsorption characteristics of organic dyes in aqueous solutions on mixed-oxide gels

Summary Five alumina-containing gels were investigated on the adsorption characteristics for four types of organic dyes (acidic, basic, reactive, and direct dyes). Alumina-magnesias exhibited the properties as strong solid bases and adsorbed effectively three dyes except for the acidic dye. While, alumina-silicas, strong solid acids, showed the high ability only for the acidic dye.

---

Adsorptionscharakteristica organischer Farbstoffe in wäßrigen Lösungen auf gemischten OxidgelenII. Aluminiumoxid-haltige gemischte Oxidgele

---

Part I: see [5]     

Dual-mode sorption of nonionic azo dyes by Nylon 6

Sorption isotherms of 2,4-dinitroaniline and three 4-amino-azobenzene derivatives (nonionic dyes with adequate solubility in water) on Nylon 6 (film and fiber) from water were determined at various temperatures. The observed isotherms were curved, not linear. They were very well described in terms of the dual-mode sorption model, Nernst-type partitioning, plus Langmuir sorption. The contribution of the Langmuir sorption to the total dye sorption decreased with increasing temperature. The saturation value for the Langmuir sorption increased with the crystallinity of Nylon 6 film, suggesting that the Langmuir sorption is associated with the crystalline phase.