Cotton Stalk Pretreatment Using <Emphasis Type="Italic">Daedalea flavida</Emphasis>, <Emphasis Type="Italic">Phlebia radiata</Emphasis>, and <Emphasis Type="Italic">Flavodon flavus</Emphasis>: Lignin Degradation,Cellulose Recovery,and Enzymatic Saccharification

Lignocellulolytic enzyme activities of selective fungi Daedalea flavida MTCC 145 (DF-2), Phlebia radiata MTCC 2791 (PR), and non-selective fungus Flavodon flavus MTCC 168 (FF) were studied for pretreatment of cotton stalks. Simultaneous productions of high LiP and laccase activities by DF-2 during early phase of growth were effective for lignin degradation 27.83 ± 1.25 % (w/w of lignin) in 20-day pretreatment. Production of high MnP activity without laccase in the early growth phase of PR was ineffective and delayed lignin degradation 24.93 ± 1.53 % in 25 days due to laccase production at later phase. With no LiP activity, low activities of MnP and laccase by FF yielded poor lignin degradation 15.09 ± 0.6 % in 20 days. Xylanase was predominant cellulolytic enzyme produced by DF-2, resulting hemicellulose as main carbon and energy source with 83 % of cellulose recovery after 40 days of pretreatment. The glucose yield improved more than two fold from 20-day DF-2 pretreated cotton stalks after enzymatic saccharification.     

Enhanced Production of Xylitol from Poplar Wood Hydrolysates Through a Sustainable Process Using Immobilized New Strain <Emphasis Type="Italic">Candida tropicalis</Emphasis> UFMG BX 12-a

A new strain, Candida tropicalis UFMG BX 12-a, was found to produce higher yields of xylitol on poplar wood hemicellulose hydrolysate. The hemicellulose hydrolysate liquor was detoxified using a novel method we developed, involving vacuum evaporation and solvent separation of inhibitors which made the hydrolysate free of toxins while retaining high concentrations of fermentable sugars. The effect of the detoxification method on the fermentation was also reported and compared to well-known methods reported in literature. In this study, the new strain C. tropicalis UFMG BX 12-a was used on the detoxified hydrolysate to produce xylitol. It was also compared to Candida guilliermondii FTI 20037, which has been reported to be one of the best strains for fermentative production of xylitol. To further improve the efficiency of the fermentation process, these strains were immobilized in calcium alginate beads. The yield (0.92 g g^?1) and productivity (0.88 g L^?1 h^?1) obtained by fermenting the wood hydrolysate detoxified by our new detoxification technique using an immobilized new Candida strain were found to be higher than the values reported in literature.     

A family of four-step trigonometrically-fitted methods and its application to the schrödinger equation

In this article we present a singularly almost P-stable exponentially-fitted four-step method for the approximate solution of the one-dimensional Schrödinger equation. More specifically we present a method that is singularly almost P-stable (a concept later introduced in this article) and also integrates exactly any linear combination of the functions {1, x, exp ( ±I v x) , x exp ( ±I v x) , x ² exp ( ±I v x)}. The numerical experimentation showed that our method is considerably more efficient compared to well known methods used for the approximate solution of resonance problem of the radial Schrödinger equation.     

The Influence of Different Strategies for the Saccharification of the Banana Plant Pseudostem and the Detoxification of Concentrated Broth on Bioethanol Production

Pseudostem of the Musa cavendishii banana plant was submitted to chemical pretreatments with acid (H₂SO₄ 2%, 120 °C, 15 min) and with alkali (NaOH 3%, 120 °C, 15 min), saccharified by commercial enzymes Novozymes® (Cellic CTec2 and HTec2). The influences of the pretreatments on the degradation of the lignin, cellulose and hemicellulose, porosity of the surface, particle crystallinity, and yield in reducing sugars after saccharification (Y _RS), were established. Different concentrations of biomass (70 and 100 g/L in dry matter (dm)), with different physical differences (dry granulated, crushed wet bagasse, and whole pseudostem), were used. The broth with the highest Y _RS among the different strategies tested was evaporated until the concentration of reducing sugars (RS) was to the order of 100 g/L and fermented, with and without prior detoxification with active carbon. Fermentation was carried out in Erlenmeyer flasks, at 30 °C, initial pH 5.0, and 120 rpm. In comparison to the biomass without chemical pretreatment and to the biomass pretreated with NaOH, the acid pretreatment of 70 g/L of dry granulated biomass enabled greater digestion of hemicellulose, lower index of cellulose crystallinity, and higher Y _RS (45.8 ± 0.7%). The RS increase in fermentation broth to 100 g/L, with posterior detoxification, presented higher productivity ethanol (Q _P = 1.44 ± 0.02 g/L/h) with ethanol yield (Y _P/RS) of 0.41 ± 0.02 g/g. The value of Q _P was to the order of 75% higher than Q _P obtained with the same broth without prior detoxification.     

Determination of Hg isotopic compositions in certified reference material NIES No. 13 Human Hair by cold vapor generation multi-collector inductively coupled plasma mass spectrometry

Hg isotopic ratios of NIES CRM No. 13 Human Hair were analyzed using cold vapor generation coupled to multi-collector inductively coupled plasma mass spectrometer to meet the growing demand for better understanding of Hg exposure routes by using Hg isotopic compositions in human hair samples. To validate and assure the accuracy of our analytical method, (1) the reproducibility of the Hg isotopic measurement was monitored and (2) the Hg isotopic compositions of four secondary reference materials—IAEA-085, IAEA-086, and CRPG-RL24H—were measured. Our results for NIES CRM No. 13 show the mass-dependent fractionation values of δ ¹⁹⁹Hg = (2.13 ± 0.07) ‰, δ ²⁰⁰Hg = (0.98 ± 0.08) ‰, δ ²⁰¹Hg = (2.77 ± 0.10) ‰, δ ²⁰²Hg = (1.89 ± 0.10) ‰, and δ ²⁰⁴Hg = (2.76 ± 0.16) ‰ (2SD, n = 11) and the mass-independent fractionation values of Δ ¹⁹⁹Hg = (1.65 ± 0.06) ‰, Δ ²⁰⁰Hg = (0.04 ± 0.04) ‰, Δ ²⁰¹Hg = (1.36 ± 0.07) ‰, and Δ ²⁰⁴Hg = (?0.04 ± 0.11) ‰ (2SD, n = 11). Interlaboratory comparison of the CRM performed at the University of Pau showed good agreement with the values obtained at NIES.     

Enzymatic Hydrolysis of Black Liquor Xylan by a Novel Xylose-Tolerant,Thermostable β-Xylosidase from a Tropical Strain of <Emphasis Type="Italic">Aureobasidium pullulans</Emphasis> CBS 135684

From three cell-associated β-xylosidases produced by Aureobasidium pullulans CBS 135684, the principal enzyme was enriched to apparent homogeneity and found to be active at high temperatures (60–70 °C) over a pH range of 5–9 with a specific activity of 163.3 units (U) mg^?1. The enzyme was thermostable, retaining over 80% of its initial activity after a 12-h incubation at 60 °C, with half-lives of 38, 22, and 10 h at 60, 65, and 70 °C, respectively. Moreover, it was tolerant to xylose inhibition with a K _i value of 18 mM. The K _m and V _max values against p-nitrophenyl-β-d-xylopyranoside were 5.57 ± 0.27 mM and 137.0 ± 4.8 μmol min^?1 mg^?1 protein, respectively. When combining this β-xylosidase with xylanase from the same A. pullulans strain, the rate of black liquor xylan hydrolysis was significantly improved by up to 1.6-fold. The maximum xylose yield (0.812 ± 0.015 g g^?1 dry weight) was obtained from a reaction mixture containing 10% (w/v) black liquor xylan, 6 U g^?1 β-xylosidase and 16 U g^?1 xylanase after incubation for 4 h at 70 °C and pH 6.0.     

Ro-vibrating energy states of a diatomic molecule in an empirical potential

An approximate analytical solution of the Schrödinger equation is obtained to represent the rotational–vibrational (ro-vibrating) motion of a diatomic molecule. The ro-vibrating energy states arise from a systematical solution of the Schrödinger equation for an empirical potential (EP) V _±(r) = D _e {1 ? (?/δ)[coth (ηr)]^±1/1 ? (?/δ)}² are determined by means of a mathematical method so-called the Nikiforov–Uvarov (NU). The effect of the potential parameters on the ro-vibrating energy states is discussed in several values of the vibrational and rotational quantum numbers. Moreover, the validity of the method is tested with previous models called the semiclassical (SC) procedure and the quantum mechanical (QM) method. The obtained results are applied to the molecules H₂ and Ar₂.     

Effect of Re addition on the crystallization,heat treatment and structure of the Cu–Ni–Si-Cr alloy

Differential scanning calorimetry (DSC) was used to investigate the thermal behavior and non-isothermal crystallization kinetics of the Fe₆₇Nb₅B₂₈ metallic glasses prepared by melt-spinning method. DSC traces exhibit that the crystallization takes place through a single exothermic reaction, and it processes a good thermal stability in thermodynamics. The activation energies for nucleation and grain growth processes were calculated to be 536 ± 22 and 559 ± 20 kJ mol^?1 by Kissinger equation, respectively, and 551 ± 24 and 574 ± 20 kJ mol^?1 by Ozawa equation, respectively. It means that the grain growth process is more difficult than the nucleation process. The variation of local Avrami exponent n(x) with crystallized fraction x demonstrates that the crystallization mechanism varies at different stages. The n(x) is larger than 2.5 at the initial stage of 0 < x < 0.3, implying a mechanism of diffusion-controlled three-dimensional growth with increasing nucleation rate. The n(x) decreases from 2.5 to 1.5 in the range of 0.3 < x < 0.65, suggesting that the crystallization belongs to three-dimensional nucleation and grain growth with decreasing nucleation rate. And n(x) lies between 1.0 and 1.5 in the range of 0.65 < x < 0.95, indicating that the crystallization corresponds to the growth of particles with an appreciable initial volume. Low-temperature annealing corresponds to the precipitation of α-Fe, Fe₂B, and Fe₂₃B₆ phases, and further annealing leads to the formation of α-Fe, Fe₂B, and FeNbB phases. The magnetic properties in relation to microstructure change of the Fe₆₇Nb₅B₂₈ metallic glasses are discussed.     

Elucidating the Effect of Glycerol Concentration and C/N Ratio on Lipid Production Using <Emphasis Type="Italic">Yarrowia lipolytica</Emphasis> SKY7

The high demand for renewable energy and increased biodiesel production lead to the surplus availability of crude glycerol. Due to the above reason, the bio-based value addition of crude glycerol into various bioproducts is investigated; among them, microbial lipids are attractive. The present study was dedicated to find the optimal glycerol concentration and carbon/nitrogen (C/N) ratio to produce maximum lipid using Yarrowia lipolytica SKY7. The glycerol concentration (34.4 to168.2 g/L) and C/N ratio (25 to 150) were selected to investigate to maximize the lipid production. Initial glycerol concentration 112.5 g/L, C/N molar ratio of 100, and with 5 % v/v inoculum supplementation were found to be optimum for biomass and lipid production. Based on the above optimal parameters, lipid concentration of 43.8 % w/w with a biomass concentration of 14.8 g/L was achieved. In the case of glycerol concentration, the maximum Yp/s (0.192 g/g); Yx/s (0.43 g/g) was noted when the initial glycerol concentration was 112.5 g/L with C/N molar ratio 100 and inoculum volume 5 % v/v. The glycerol uptake was also noted to increase with the increase in glycerol concentration. At low C/N ratio, the glycerol consumption was found to be high (79.43 g/L on C/N 25) whereas the glycerol consumption was observed to decrease when the C/N ratio was raised to 150 (40.8 g/L).     

Oxygen isotope exchange in praseodymium nickelate

Oxygen surface exchange kinetics and diffusion were studied in Pr₂NiO_4?+?δ (PNO) by the isotope exchange method with gas phase equilibration in the temperature range of 600–800 °C and oxygen pressure range of 0.33–1.62 kPa. The oxygen heterogeneous exchange rate (r_H), oxygen diffusion coefficient (D), rates of oxygen dissociative adsorption (r_a), and oxygen incorporation (r_i) were calculated along with the apparent activation energies of oxygen surface exchange and diffusion processes. The temperature dependence of r_H was found to benon-linear in Arrhenius coordinates. The apparent activation energy changed from 1.4?±?0.2 eV at T?>?700 °C to 2.0?±?0.1 eV. This might be attributed to the change in the rate-determining stage of oxygen exchange for Pr₂NiO_4?+?δ at T ~?700 °C, because of a shift in the ratio between r_a and r_i caused by the difference in their activation energies. Possible reasons for the observed changes in the rate-determining stage are discussed.     

Synthesis,crystal structure,and thermodynamics of a high-nitrogen copper complex with <Emphasis Type="Italic">N</Emphasis>, <Emphasis Type="Italic">N</Emphasis>-bis-(1(2)H-tetrazol-5-yl) amine

A new high-nitrogen complex [Cu(Hbta)₂]·4H₂O (H₂bta = N,N-bis-(1(2)H-tetrazol-5-yl) amine) was synthesized and characterized by elemental analysis, single crystal X-ray diffraction and thermogravimetric analyses. X-ray structural analyses revealed that the crystal was monoclinic, space group P2(1)/c with lattice parameters a = 14.695(3) Å, b = 6.975(2) Å, c = 18.807(3) Å, β = 126.603(1)°, Z = 4, D _c = 1.888 g cm^?3, and F(000) = 892. The complex exhibits a 3D supermolecular structure which is built up from 1D zigzag chains. The enthalpy change of the reaction of formation for the complex was determined by an RD496–III microcalorimeter at 25 °C with the value of ?47.905 ± 0.021 kJ mol^?1. In addition, the thermodynamics of the reaction of formation of the complex was investigated and the fundamental parameters k, E, n, \( \Updelta S_{ \ne }^{{{\uptheta}}} \), \( \Updelta H_{ \ne }^{{{\uptheta}}} \), and \( \Updelta G_{ \ne }^{{{\uptheta}}} \) were obtained. The effects of the complex on the thermal decomposition behaviors of the main component of solid propellant (HMX and RDX) indicated that the complex possessed good performance for HMX and RDX.     

Increased enzymatic hydrolysis of sugarcane bagasse by a novel glucose- and xylose-stimulated β-glucosidase from <Emphasis Type="Italic">Anoxybacillus flavithermus</Emphasis> subsp. <Emphasis Type="Italic">yunnanensis</Emphasis> E13<Superscript>T</Superscript>

Background

β-Glucosidase is claimed as a key enzyme in cellulose hydrolysis. The cellulosic fibers are usually entrapped with hemicelluloses containing xylose. So there is ongoing interest in searching for glucose- and xylose-stimulated β-glucosidases to increase the efficiency of hydrolysis of cellulosic biomass.

Results

A thermostable β-glucosidase gene (Bglp) was cloned from Anoxybacillus flavithermus subsp. yunnanensis E13^T and characterized. Optimal enzyme activity was observed at 60 °C and pH 7.0. Bglp was relatively stable at 60 °C with a 10-h half-life. The kinetic parameters V _max and K _m for p-nitrophenyl-β-D-glucopyranoside (pNPG) were 771?±?39 μmol/min/mg and 0.29?±?0.01 mM, respectively. The activity of Bglp is dramatically stimulated by glucose or xylose at concentrations up to 1.4 M. After Bglp was added to Celluclast® 1.5 L, the conversion of sugarcane bagasse was 48.4?±?0.8%, which was much higher than of Celluclast® 1.5 L alone. Furthermore, Bglp showed obvious advantages in the hydrolysis when initial concentrations of glucose and xylose are high.

Conclusions

The supplementation of BglP significantly enhanced the glucose yield from sugarcane bagasse, especially in the presence of high concentrations of glucose or xylose. Bglp should be a promising candidate for industrial applications.

     

Radiolabeling of gemifloxacin with technetium-99m and biological evaluation in artificially <Emphasis Type="Italic">Streptococcus pneumoniae</Emphasis> infected rats

In the current investigation complexation of the gemifloxacin (GIN) with technetium-99 m (^99mTc) and its biological evaluation in artificially Streptococcus pneumoniae (S. pneumoniae) infected rats was assessed as potential S. pneumoniae infection radiotracer. Radiochemically the ^99mTc-GIN complex was further analyzed in terms of stability in saline, in vitro stability in serum at 37 °C, in vitro binding with S. pneumoniae and biodistribution in artificially S. pneumoniae (living and heat killed) infected rats. The complex was found 97.25 ± 0.25% radiochemically stable in saline at 30 min after reconstitution. The stability of the ^99mTc-GIN complex was decreased to 90.50 ± 0.20% within 240 min after reconstitution. In serum the ^99mTc-GIN complex showed stable profile with the appearance of 18.85% free tracer within 16 h of incubation. The ^99mTc-GIN complex showed saturated in vitro binding with S. pneumoniae after different intervals. Almost five fold uptake was observed in living S. pneumoniae infected muscle of the rats as compared to the inflamed and normal muscle. No significant difference in the uptake of heat killed S. pneumoniae infected, inflamed and normal muscles of the rats. The high RCP yield in saline, in vitro permanence in serum, in vitro binding with living S. pneumoniae and biodistribution in artificially S. pneumoniae infected rats we recommend the ^99mTc-GIN as potential S. pneumoniae infection radiotracer.     

Bioaccumulation of <Superscript>137</Superscript>Cs and <Superscript>60</Superscript>Co by bacteria isolated from spent nuclear fuel pools

This paper is focused on a characterization of bacterial contamination in pool water of the interim spent fuel storage (JAVYS Inc.) in Slovak Republic and on bioaccumulation of ¹³⁷Cs and ⁶⁰Co by isolated bacteria. Bacterial community in pool water is kept on very low level by extremely low concentration of solutes in deionized water and by the efficient water filtration system. Based on standard methods and sequencing of 16S rDNA four pure bacterial cultures were identified as Kocuria palustris, Micrococcus luteus, Ochrobactrum spp. and Pseudomonas aeruginosa. Isolated aerobic bacteria were able to bioaccumulate ¹³⁷Cs and ⁶⁰Co in laboratory experiments. The mechanism of Co and Cs binding involve rapid interactions with anionic groups of the components of cell surface and in the case of Cs⁺ ions is followed by transport processes across cytoplasm membranes and by intracellular distribution. The maximum specific uptake of Cs⁺ after 48 h cultivation in mineral medium (MM) reached 7.54 ± 0.48 μmol g^?1 dw (Ochrobactrum spp.), 19.6 ± 0.1 μmol g^?1 dw (M. luteus) and 20.1 ± 2.2 μmol g^?1 dw (K. palustris). The maximum specific uptake of Co²⁺ after 24 h cultivation in MM reached 31.1 ± 3.5 μmol g^?1 dw (Ochrobactrum spp.), 86.6 ± 12.2 μmol g^?1 dw (M. luteus) and 16.9 ± 1.2 μmol g^?1 dw (K. palustris). These results suggest that due to the long lasting uptake of ¹³⁷Cs, ⁶⁰Co and other radionuclides by biofilm in pool water high specific radioactivities (Bq m^?2) can be expected on stainless steel walls of pools.     

Synthesis,radiolabeling and biological distribution of a new dioxime derivative as a potential tumor imaging agent

A novel dioxime derivative (2E,2′E,3E,3′E)-3,3′-(pyrimidine-4,5-diylbis(azanylylidene))bis(butan-2-one)dioxime was synthesized with a yield of 65%. IR, elemental analysis, mass spectroscopy and ¹H-NMR were used to characterize the structure of the synthesized compound. ^99mTc-dioxime was radio-synthesized with a high radiochemical yield of 97.8 ± 0.5% and in vitro stability of 6 h under the optimum conditions. The preclinical evaluation of ^99mTc-dioxime in solid tumor-bearing mice showed high accumulation in solid tumor cells with a high Target/Non-Target ratio of 5.14 at 30 min post-injection. This study suggests that ^99mTc-dioxime derivative is a promising candidate as a new ^99mTc-based tumor-imaging agent after further preclinical studies.     

Binding interaction and conformational changes of human serum albumin with ranitidine studied by spectroscopic and time-resolved fluorescence methods

This study was designed to examine the interaction of histamine H₂-receptor antagonist drug ranitidine (RTN) with human serum albumin by multi-spectroscopic methods. The experimental results showed the involvement of dynamic quenching mechanism which was further confirmed by lifetime spectral studies. The binding constants (K _a) at three temperatures (288, 298, and 308 K) were 2.058 ± 0.020, 4.160 ± 0.010 and 6.801 ± 0.011 × 10⁴ dm³ mol^?1, respectively, and the number of binding sites (m) were 1.169, respectively; thermodynamic parameters ΔH ⁰ (44.152 ± 0.047 kJ mol^?1), ΔG ⁰ (?26.214 ± 0.040 kJ mol^?1), and ΔS ⁰ (236.130 ± 0.025 J K^?1 mol^?1) were calculated. The distance r between donor and acceptor was obtained (r = 3.40 nm) according to the Förster theory of non-radiative energy transfer. Synchronous fluorescence, CD, AFM and 3D fluorescence spectral results revealed the changes in secondary structure of the protein upon interaction with RTN. A molecular modeling study further confirmed the binding mode obtained by the experimental studies.     

The response electron–electron repulsion energy and energy component analysis in CC/MBPT methods

Molecular properties are computed as responses to perturbations (energy derivatives) in coupled-cluster (CC)/many-body perturbation theory (MBPT) models. Here, the CC/MBPT energy derivative with respect to a general two-electron (2-e) perturbation is assembled from gradient theory for 2-e property evaluation, including the electron repulsion energy. The correlation energy (?E) is shown to be the sum of response kinetic (?T), electron–nuclear attraction (?V), and electron repulsion (?V _ee ) energies. Thus, evaluation of total V _ee for energy component analysis is simple: For total energy (E), total 1-e responses T and V, and nuclear–nuclear repulsion energy (V _NN ), V _ee  = E ? V _NN  ? T ? V is the true 2-e response value. Component energy analysis is illustrated in an assessment of steric repulsion in ethane’s rotational barrier. Earlier SCF-based results (Bader et al. in J Am Chem Soc 112:6530, 1990) are corroborated: The higher-energy eclipsed geometry is favored versus staggered in the two repulsion energies (V _NN and V _ee ), while decisively disfavored in electron–nuclear attraction energy (V). Our best quality calculations (CCSD/cc-pVQZ) attain practical Virial Theorem compliance (i.e., agreement among the kinetic energy, potential energy, and total energy representations) in assigning 2.70 ± 0.06 to the barrier height; ?195.80 kcal/mol is assigned to the drop in “steric” repulsion upon going to the eclipsed geometry. Steric repulsion is not responsible for any fraction of the ~3 kcal/mol barrier.     

Power consumption for an agitated vessel equipped with pitched blade turbine and short baffles

Power characteristics for an agitated vessel equipped with planar short baffles of length L and pitched blade turbine of pitch β are presented in the paper. The studies were carried out in the vessel of inner diameter D = 0.6 m, where the baffles were located in the distance p from the vessel bottom (p + L = H). Torque was measured using strain gauge method within the turbulent regime of the flow of Newtonian liquid in the agitated vessel. The effects of the pitch β and geometrical parameter p/H on the power number Ne were determined mathematically. The results showed that, for the assumed value of the angle β, the function Ne = f (L/H) decreases with the decrease in the baffle length L (i.e. with the increase in the parameter p). Moreover, for the assumed value of the baffle length L, the function Ne = f (β) increases with the increase in the angle β of the inclination of the impeller blade.     

Quantitative Analysis of Phenolic Acids in Extracts Obtained from the Fruits of Peucedanum alsaticum L. and Peucedanum cervaria (L.) Lap

Peucedanum alsaticum L. and Peucedanum cervaria (L.) Lap. are, in common with all species belonging to the Apiaceae family, rich in coumarins and essential oils. Phenolic acids also present in the plant are very important pharmacologically, because of their broad spectrum of biological activity. A simple high-performance liquid chromatographic method has been developed for separation and quantitative analysis of the major phenolic acids in extracts obtained from the fruits of P. alsaticum and P. cervaria. Soxhlet extraction, ultrasound extraction, and accelerated solvent extraction under different conditions were used to find the most efficient extraction conditions. Optimum chromatographic performance was obtained with a C₁₈ column and acetonitrile—1% (v/v) aqueous acetic acid as mobile phase. Ferulic, p-coumaric, caffeic, vanillic, syringic, p-hydroxybenzoic, protocatechuic, chlorogenic, and gallic acids were investigated in the fruits of the plants. For all calibration plots linearity was good (R ² > 0.9991) in the ranges tested. The highest yields of most of the phenolic acids were achieved by use of accelerated solvent extraction. The predominant phenolic acid in the fruits of both plants was chlorogenic acid. The amounts, which depended on the method of extraction, were approximately 146 ± 1.616 and 109.92 ± 3.405 mg per 100 g dry weight for P. cervaria and P. alsaticum, respectively.