Effects of hemicellulose and lignin on enzymatic hydrolysis of cellulose from dairy manure

This study focused on the effect of hemicellulose and lignin on enzymatic hydrolysis of dairy manure and hydrolysis process optimization to improve sugar yield. It was found that hemicellulose and lignin in dairy manure, similar to their role in other lignocellulosic material, were major resistive factors to enzymatic hydrolysis and that the removal of either of them, or for best performance, both of them, improved the enzymatic hydrolysis of manure cellulose. This result combined with scanning electron microscope (SEM) pictures further proved that the accessibility of cellulose to cellulase was the most important feature to the hydrolysis. Quantitatively, fed-batch enzymatic hydrolysis of fiber without lignin and hemicellulose had a high glucose yield of 52% with respect to the glucose concentration of 17 g/L at a total enzyme loading of 1300 FPU/L and reaction time of 160 h, which was better than corresponding batch enzymatic hydrolysis.     

Pyrolysis characteristics of cellulose derived from moso bamboo and poplar

To compare with pyrolysis characteristics of cellulose from moso bamboo and poplar, samples were pyrolyzed with different heating rates through thermogravimetric analysis (TG). The kinetics was calculated by Kissinger–Akahira–Sunose method. The results showed that pyrolysis process of moso bamboo and poplar fiber included three stages, and the main pyrolysis occurred in the second step. Moso bamboo fiber had a higher start temperature, a lower end temperature and a more mass loss at each heating rate in the main pyrolysis stage. With increase in heating rate, the temperature corresponding to the maximum of mass loss increased and the DTG curve shifted to higher temperature. The reaction rates varied at different heating rates. The activation energy of cellulose from moso bamboo was lower than poplar cellulose, indicating cellulose of moso bamboo was easier to be pyrolyzed. The results from this research will provide guidance to thermal conversion of moso bamboo and poplar.

     

Key role of the hemicellulose content and the cell morphology on the nanofibrillation effectiveness of cellulose pulps

The effect of the hemicellulose content and that of the fibre morphology on the nanofibrillation behaviour of delignified cellulose pulps were studied. For this purpose, pulps from two non-woody plants, alfa (Stipa tenacissima) and sunflower (Helianthus annuus), were delignified using NaClO₂/acetic acid and the NaOH pulping processes to obtain fibres with different hemicellulose contents. The ensuing fibres were characterized by chemical analysis, SEM, FTIRS and X-ray diffraction. The fibres were then disintegrated into nanofibrillated cellulose (NFC) using either a high pressure homogenizer or a domestic blender. The degree of fibrillation and the morphology of the nanofibrillated fractions were evaluated by centrifugation and Field-emission scanning electron microscopy. Pulps containing the highest hemicellulose content showed higher yields of the nanofibrillated fraction and a better aptitude for the individualization of the microfibrils. Furthermore, it was shown that fibres from sunflowers exhibiting a thinner cell wall were easier to fibrillate and could be disintegrated into NFC by just using a simple domestic-blender once deliginification process was carried out using the NaClO₂/acetic acid method. Eucalyptus fibres were also used to further confirm the key role of hemicelluloses in the nanofibrillation process of woody plants.     

Raman spectra of pure biomolecules obtained using a handheld instrument under cold high-altitude conditions

A handheld Raman spectrometer (Ahura First Defender) was tested for the unambiguous identification of biomolecules (pure amino acids, carboxylic acids, saccharides and trehalose) in the solid state under outdoor conditions (including moderate climate conditions as well as cold temperatures and high altitudes). The biomolecules investigated represent important objects of interest for future exobiological missions. Repetitive measurements carried out under identical instrumental setups confirmed the excellent reliability of the Raman spectrometer. Raman bands are found at correct wavenumbers ±3 cm⁻¹ compared with reference values. This testing represents the first step in a series of studies. In a preliminary, challenging investigation to determine the detection limit for glycine dispersed in a powdered gypsum matrix, 10% was the lowest content confirmed unambiguously. Clearly there is a need to investigate further the detection limits of Raman spectroscopic analyses of biomolecules in more complex samples, to demonstrate the usefulness or disqualify the use of this technique for more realistic outdoor situations, such as eventual future missions to Mars.     

Separation of cellulose/hemicellulose from lignin in white pine sawdust using boron trihalide reagents

A mild method for the separation of cellulose/hemicellulose from extractives free sawdust is described. Sequential treatments with an equimolar mixture of BCl₃ and BBr₃ remove polysaccharide components from a white pine sawdust sample. Spectroscopic analyses, including solution and solid-state NMR spectroscopy, confirm a reduction in the amount of aliphatic sugars in solid samples and show that extracted components consist only of polymeric sugars and are free of aromatics. Staining with fluorescent and colorimetric dyes confirm that the sawdust sample after boron trihalide treatment is primarily lignin, with no detectable polysaccharides.     

On the structure of poly(2,4-dichlorophenylacetylene) from the data of resonance Raman spectra

The resonance Raman spectra of poly(2,4-dichlorophenylacetylene) in the range of wavelengths of the exciting radiation between 457.9 and 647.1 nm were studied. It was shown that the frequencies, intensities, and shapes of the bands related to the backbone stretching vibrations changed as the frequency of the exciting light varied. This was explained by a rather broad distribution of the conjugated segments of the polymer over the number of conjugated C=C bonds. A possible structural model involving atrans-cis conformation of the chain of the polymer studied was proposed.Translated fromIzvestiya Akademii Nauk. Serlya Khimkheskaya, No. 6, pp. 1173–1174, June, 1995.The work was carried out with financial support of the Russian Foundation for Basic Research (Grant No. 93-03-5566) and the International Science Foundation (Grant No. 4895-0925)     

Direct analysis of cellulose in poplar stem by matrix-assisted laser desorption/ionization imaging mass spectrometry

Matrix-assisted laser desorption/ionization imaging mass spectrometry (MALDI-IMS) was applied to the analysis of the spatial distribution of cellulose on a cross-section of juvenile poplar (Populus deltoids) stems. Microcrystalline cellulose (MCC) was used to optimize matrix (2,5-dihydroxybenzoic acid) application and instrument parameters for the detection of low hexose oligomers, which originated from cellulose in the solid phase. A section of poplar cellulose isolated from juvenile poplar stem which consisted primarily of glucose (～95%) and minor components such as xylose and lignin was used for the MALDI-IMS studies. The mass spectrum of poplar cellulose consisted of a series of evenly spaced signals having a difference of 162 m/z units, which was similar to that of MCC in linear and reflectron positive ion modes. MS images of cellulose compounds with sodium ion adducts were generated and illustrated the distribution of cellulose on the surface of the poplar stem.     

The impact of cellulose structure on binding interactions with hemicellulose and pectin

Four cellulose substrates including highly crystalline cellulose nanowhiskers (CNWs) from Gluconacetobacter xylinus (cellulose Iα) or cotton (cellulose Iβ) and amorphous cellulose derived from CNWs (phosphoric acid swollen cellulose nanowhiskers, PASCNWs) were used to explore the interaction between cellulose and well-defined xyloglucan, xylan, arabinogalactan and pectin. The binding behavior was characterized by adsorption isotherm and Langmuir models. The maximum adsorption and the binding constant of xyloglucan, xylan and pectin to any CNWs were always higher than to PASCNWs derived from the same source. The binding affinity of xyloglucan, xylan and pectin to G. xylinus cellulose was generally higher than to cotton cellulose, showing that binding interactions depended on the biological origin of cellulose and associated differences in its structure. The surface area, porosity, crystal plane and degree of order of cellulose substrate may all impact the interactions.     

Recognition of big data mixed Raman spectra based on deep learning with smartphone as Raman analyzer

Raman spectral detection has emerged as a powerful analytical technique due to the advantages of fast acquisition, non-invasion, and low cost. The on-site application is highly dependent on Raman automatic analysis algorithm. However, current Raman algorithm research mainly focuses on small sample Raman spectroscopy (RS) identification with defects of low accuracy and detection rate. It is also difficult to realize rapid RS measurement under big data. In this paper, rapid recognition of mixtures in complex environments was realized by establishing a fast Raman analysis model based on deep learning through data training, self-learning, and parameter optimization. The cloud network architecture was proposed to apply deep learning to real-time detection using Smartphone-based Raman devices. This research solves the technical problems about mixture recognition under big data and thus could be used as a new method for fast and field RS detection in complex environments.     

Infrared and Raman spectra of N-n-alkylthioureas

The i.r. and Raman spectra of solid alkyl thioureas H₂NCSNH(CH₂)nCH₃ (n = 0–15), TUR′, and their urea analogue H₂NCONH(CH₂)nCH₃ (n = 0–9), UR′, are presented. The vibrational properties of N-monosubstituted TUR′and UR′are studied on the basis of the spectral comparison between the members of the series and compared with the properties of N,N′-di-substituted MTUR′ and MUR′, correspondingly. Some features of the methylene ν₄ and ν₇ band progressions were found to shift from the corresponding features of solid n-alkanes by vibrational coupling. The observed wavenumber of the longitudinal accordion-like skeletal motion (LAM-1) of TUR′ was found to correspond to that of the n-alkane with the same number of carbon atoms as TUR′ has skeletal atoms.     

Multivariate data analysis for Raman imaging of a model pharmaceutical tablet

Spectroscopic imaging techniques provide spatial and spectral information about a sample simultaneously and are finding ever-increasing application in the pharmaceutical industry. Effective extraction of chemical information from imaging data sets is a crucial step during the application of imaging techniques. Multivariate imaging data analysis methods have been reported but few applications of these methods for pharmaceutical samples have been demonstrated. In this study, a bilayer model tablet consisting of avicel, lactose, sodium benzoate, magnesium stearate and red dye was prepared using custom press tooling, and Raman mapping data were collected from a 400 μm × 400 μm area of the tablet surface. Several representative multivariate methods were selected and used in the analysis of the data. Multivariate data analysis methods investigated include principal component analysis (PCA), cluster analysis, direct classical least squares (DCLS) and multivariate curve resolution (MCR). The relative merits and drawbacks of each technique for this application were evaluated. In addition, some practical issues associated with the use of these methods were addressed including data preprocessing, determination of the optimal number of clusters in cluster analysis and the optimization of window size in second derivative calculation.     

Raman spectra of flavins: avoidance of interference from fluorescence

Raman spectra of flavin mononucleotide (FMN) and flavin adenine dinucleotide (FAD) in neutral aqueous solutions have been observed with excitations at 600.0, 363.8, 351.1, 337.1, and 257.3 nm. It has been suggested that, in general, an excitation in the absorption band of the second or the third longest waveleng (instead of the first) is an effective means for observing a resonance Raman spectrum of a chromophore without fluorescence disturbance.     

Raman and surface-enhanced Raman spectra of chrysin,apigenin and luteolin

The FT-Raman and surface-enhanced Raman (SER) spectra of three flavonoids, namely chrysin, apigenin and luteolin, have been obtained. The SERS spectra were obtained on citrate reduced Ag colloids. Assignments of the experimentally obtained normal vibrational modes were aided by density functional theory (DFT) calculations using the B3LYP functional and the 6-31+G* basis set. Excellent fits were obtained for the observed spectra with little or no scaling. The most intense lines in the three flavonoids SERS spectra are those in the CO stretching region and around 1250 cm^?1. The first ones are often weakened by proximity of the metal surface, whereas the latter are not affected by the Ag. On the other hand, the lines at lower wavenumbers, assigned to in-plane ring deformation, are strongly enhanced by the surface, indicating a perpendicular orientation of the flavonoids on the Ag surface. The spectra of the flavonoids are compared, and a case study of application to detect weld, a mixture of apigenin and luteolin, in a textile is presented.     

Optimization of steam explosion to enhance hemicellulose recovery and enzymatic hydrolysis of cellulose in softwoods

A combination of Douglas fir heartwood and sapwood chips were steam pretreated under three conditions as measured by the Severity Factor (log R_o), which incorporated the time, temperature/pressure of pretreatment. By adjusting the steam pretreatment conditions, it was hoped to recover the majority of the hemicellulose component as monomers in the water-soluble stream, while providing a cellulosic-rich, water-insoluble fraction that could be readily hydrolyzed by cellulases. These three conditions were chosen to represent either high hemicellulose sugar recovery (low severity [L], log R_o=3.08), high-enzyme hydrolyzability of the cellulosic component (high severity [H], log R_o=4.21), and a compromise between the two conditions (medium severity [M], log R_o=3.45). The medium-severity pretreatment conditions (195°C, 4.5 min, 4.5% SO₂ logR_o=3.45) gave the best compromise in terms of relatively high hemicellulose recovery after stream pretreatment and the subsequent efficiency of enzymatic hydrolysis of the water-insoluble cellulosic fraction. The percent recovery of the original hemicellulose in the water-soluble fraction dropped significantly when the severity was increased (L-76.8%, M-64.7%, and H-37.5%). However, the ease of enzymatic hydrolysis of the cellulose-rich, water-insoluble fraction increased with increasing severity (L-24%, M-86.6%, and H-97.9%). Although more severe pretreatment conditions provided optimum hydrolysis of the cellulosic component, less severe conditions resulted in better recovery of the combined hemicellulose and cellulosic components.     

Raman,resonance Raman and infrared spectra of potassium uranyl croconate

The Raman, resonance Raman and IR spectra of potassium uranyl croconate, UO₂(H₂O)K₂(C₅O₅)₂ were obtained and interpreted. Several croconate modes are split indicating a substantial decrease in the oxocarbon symmetry, as is to be expected from a recent crystallographic investigation, revealing the coordination of the oxocarbon to be two non-equivalent UO²⁺₂ moieties in a monodentate fashion. In terms of vibrational frequency shifts it can be concluded that the UO²⁺₂ moiety behaves as an isolated oscillator.The resonance Raman results suggest that the strong band centered around 450 nm in the UV—vis spectrum should be assigned to a charge transfer transition from the oxocarbon to the uranyl ion. In fact, as resonance is approached, both uranyl and croconate modes are enhanced. It can also be inferred that the chromophore is rather delocalized into the oxocarbon ring, rather than localized in the carbonyl groups as previously observed for other croconate complexes.     

Raman and infrared spectra of crystalline fluoroform

Raman and far-infrared spectra of crystalline fluoroform at temperatures between 20 and 106 K have been recorded. There is no evidence for any solid-state phase transitions, nor for hydrogen bonding. The rich lattice spectra and crystal field splittings suggest that the unit cell is rather large, and possible structures are discussed.