In situ mineralization of hydroxyapatite on electrospun chitosan-based nanofibrous scaffolds

A biocomposite of hydroxyapatite (HAp) with electrospun nanofibrous scaffolds was prepared by using chitosan/polyvinyl alcohol (CS/PVA) and N-carboxyethyl chitosan/PVA (CECS/PVA) electrospun membranes as organic matrix, and HAp was formed in supersaturated CaCl2 and KH2PO4 solution. The influences of carboxylic acid groups in CECS/PVA fibrous scaffold and polyanionic additive poly(acrylic acid) (PAA) in the incubation solution on the crystal distribution of the HAp were investigated. Field-emission scanning electron microscopy (FE-SEM), energy-dispersive spectroscopy (EDS), wide-angle X-ray diffraction (WAXD), and Fourier transform infrared (FTIR) were used to characterize the morphology and structure of the deposited mineral phase on the scaffolds. It was found that addition of PAA to the mineral solution and use of matrix with carboxylic acid groups promoted mineral growth and distribution of HAp. MTT testing and SEM imaging from mouse fibroblast (L929) cell culture revealed the attachment and growth of mouse fibroblast on the surface of biocomposite scaffold, and that the cell morphology and viability were satisfactory for the composite to be used in bioapplications.     

Functional nanofibrous scaffolds for bone reconstruction

DNA compaction, encapsulation and stabilization strategies as well as a scheme for DNA chain stabilization by complex formation with modified fullerenes for gene delivery are discussed. DNA can be compacted in organic solvents and encapsulated with amphiphilic triblock copolymers. The rapid removal of the solvent mixtures by electrospinning together with a biodegradable polymer preserves the globular DNA conformation and can be used for bone reconstruction applications. Cationic fullerene surfactants can decorate and stabilize DNA coils in aqueous solution. The complex formation process is studied by static light scattering and analyzed in detail.     

Acetobacter cellulose pellicle as a temporary skin substitute

Applied Biochemistry and Biotechnology - A bacterial strain with morphological and biochemical properties close toAcetobacter xylinum has been cultured in nonagitated, inverted sucrose- and yeast...     

Photocrosslinked methacrylated poly(vinyl alcohol)/hydroxyapatite nanocomposite hydrogels with enhanced mechanical strength and cell adhesion

Poly(vinyl alcohol) (PVA) hydrogels with high water content, good load‐bearing property, low frictional behavior as well as excellent biocompatibility have been considered as promising cartilage replacement materials. However, the lack of sufficient mechanical properties and cell adhesion are two critical barriers for their application as cartilage substitutes. To address these problems, herein, methacrylated PVA with low degree of substitution of methacryloyl group has been synthesized first. Then, methacrylated PVA‐glycidyl methacrylate/hydroxyapatite (PVA‐GMA/Hap) nanocomposite hydrogels have been developed by the photopolymerization approach subsequently. Markedly, both pure PVA‐GMA hydrogel and PVA‐GMA/Hap nanocomposite hydrogels exhibit excellent performance in compressive tests, and they are undamaged during compressive stress–strain tests. Moreover, compared to pure PVA‐GMA hydrogels, 8.5‐fold, 7.4‐fold, and 14.2‐fold increase in fracture stress, Young's modulus and toughness, respectively, can be obtained for PVA‐GMA/Hap nanocomposite hydrogels with 10 wt % Hap nanoparticles. These enhancements can be ascribed to the intrinsic property of PVA‐GMA and strong hydrogen bonding interactions between PVA‐GMA chain and Hap nanoparticles. More interestingly, significant improvement in the cell adhesion can also be successfully achieved by incorporation of Hap nanoparticles. These biocompatible nanocomposite hydrogels have great potential to be used as cartilage substitutes. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019, 57, 1882–1889     

A novel method to prepare microporous and nanofibrous hydrogel scaffolds as neural tissue engineering

A new method to prepare poly (vinyl alcohol) hydrogels by nebulization method.is introduced. A blend of Poly (vinyl alcohol) (PVA), sodium gum malate (SGM) and cellulose nanofibers (CNFs) originated from Catha Edulis was prepared and tested as neural tissue substitutes. Glutaraldehyde (GLA) was used as a crosslinker. Presence of SGM and CNFs in the formulation improved the nebulization process of PVA solution as well as mechanical properties of the fabricated hydrogels. The tensile strength of neat PVA films attains 46.7 MPa, while the tensile strength was 94.23 MPa for crosslinked-PVA. The tensile strength was found to increase with the increase in the CNFs content in the PVA compared with PVA/SGM. These soft tissues were characterized by using FTIR, SEM, and DSC. Scanning electron microscopy (SEM) results showed that PVA/SGM/CNFs blends has a diameter about 50 ± 8µm. The hydrogels were tested also for antimicrobial activities against pathogenic bacteria like Candida albicans (fungus), Bacillus subtilis (G + Ve), Staphylococcus aureus (G + Ve), Proteus vulgaris (G ? Ve) and Erwinia carotovora (G ? Ve). Favorable mechanical, thermal properties and biodegradation nature of the hydrogels, as well as antimicrobial property indicate that prepared hydrogels are suitable for tissue engineering applications.     

Form-stable electrospun nanofibrous mats as a potential phase change material

A series of Poly vinyl butyral–Poly (acrylic acid) (PVB-PAA) based form-stable phase change materials (PCMs) have been prepared for the use of thermal energy storage applications. Six types of formulations containing five different fatty alcohols were prepared by adding PVB to PAA. Using electrospinning to fabricate nanofibrous mats, our aim was to investigate their properties as form-stable PCMs. Fatty alcohols, 1-Tetradecanol, 1-Hexadecanol, 1-Octadecanol, 1-Eicosanol and 1-Docosanol, were added separately to base formulation. The structural characterization tests were performed by ATR-FTIR spectroscopy. Morphological tests were conducted using Scanning Electron Microscope (SEM). Thermal performances and phase change behaviors were tested by thermogravimetric analysis system (TGA) and differential scanning calorimetry (DSC). The heating cycle phase change enthalpy is measured between 223 and 241?J/g, and the freezing cycle phase change enthalpy is found between 215 and 239?J/g. The main decomposition PVB-PAA based PCMs started at 220?°C. This study suggested that PVB-PAA based PCMs possess well phase change properties and they were found to have an applicable temperature range. With the presented results these materials promise a great potential in thermal energy storage applications.     

Electrospun collagen-chitosan-TPU nanofibrous scaffolds for tissue engineered tubular grafts

The objective of this study is to design a novel kind of scaffolds for blood vessel and nerve repairs. Random and aligned nanofibrous scaffolds based on collagen-chitosan-thermoplastic polyurethane (TPU) blends were electrospun to mimic the componential and structural aspects of the native extracellular matrix, while an optimal proportion was found to keep the balance between biocompatibility and mechanical strength. The scaffolds were crosslinked by glutaraldehyde (GTA) vapor to prevent them from being dissolved in the culture medium. Fiber morphology was characterized using scanning electron microscopy (SEM) and atomic-force microscopy (AFM). Fourier transform infrared spectroscopy (FTIR) showed that the three-material system exhibits no significant differences before and after crosslinking, whereas pore size of crosslinked scaffolds decreased drastically. The mechanical properties of the scaffolds were found to be flexible with a high tensile strength. Cell viability studies with endothelial cells and Schwann cells demonstrated that the blended nanofibrous scaffolds formed by electrospinning process had good biocompatibility and aligned fibers could regulate cell morphology by inducing cell orientation. Vascular grafts and nerve conduits were electrospun or sutured based on the nanofibrous scaffolds and the results indicated that collagen-chitosan-TPU blended nanofibrous scaffolds might be a potential candidate for vascular repair and nerve regeneration.     

Tofu as excellent scaffolds for potential bone regeneration

Biomimetic scaffolds present the promising potential for bone regeneration. As a natural gel-like traditional food, tofu with porous architecture and proved biological safety indicated a good potential to be a natural scaffold and easy to be improved by surface modification. Hereon, we fabricated the tofu-based scaffolds and systematically explored the potential for bone tissue engineering. In addition, the collagen has been introduced by simple coating to further enhance the surface compatibility of the tofu-based scaffold in bone regeneration. The results showed that the tofu-based scaffolds possessed good porous structure and cytocompatibility. Notably, the tofu-based scaffolds could improve the expression of osteogenesis-related genes and proteins, leading to better bone regeneration after 2 months of implantation. All the results indicated that tofu would become an outstanding sustainable natural porous scaffold for bone regeneration with excellent bioactivities.     

Tofu as excellent scaffolds for potential bone regeneration

Biomimetic scaffolds present the promising potential for bone regeneration. As a natural gel-like traditional food, tofu with porous architecture and proved biological safety indicated a good potential to be a natural scaffold and easy to be improved by surface modification. Hereon, we fabricated the tofubased scaffolds and systematically explored the potential for bone tissue engineering. In addition, the collagen has been introduced by simple coating to further enhance the surface compatibility of the tofubased scaffold in bone regeneration. The results showed that the tofu-based scaffolds possessed good porous structure and cytocompatibility. Notably, the tofu-based scaffolds could improve the expression of osteogenesis-related genes and proteins, leading to better bone regeneration after 2 months of implantation. All the results indicated that tofu would become an outstanding sustainable natural porous scaffold for bone regeneration with excellent bioactivities.     

Preparation of a thermo- and pH-sensitive nanofibrous scaffold with embedded chitosan-based nanoparticles and its evaluation as a drug carrier

Environmentally sensitive poly(N-isopropylacrylamide) (PNIPAAm) nanofibrous scaffolds loaded with a hydrophilic drug were fabricated via an electrospinning process. First, thermally crosslinkable poly(NIPAAm-co-N-methylolacrylamide) (PNN) was synthesized by redox polymerization below the phase transition temperature of PNIPAAm. The phase transition temperature of the PNN copolymer could be altered from 34 to 40 °C by changing the ratio of N-methylolacrylamide (NMA) to NIPAAm. Subsequently, PNN/chitosan nanofibers were electrospun using ethanol/acetic acid/water as a cosolvent. The PNN/chitosan nanofibers were sensitive to both pH and temperature. The fibrous structure of the soaked PNN/chitosan nanofibers was successfully preserved by the crosslinking of NMA. Furthermore, the chitosan-based nanoparticles (NPs) were introduced into the PNN nanofibers (PNN/NPs) to achieve prolonged drug release. The nanoparticles were observed in the PNN nanofibers by transmission electron microscopy. All of the scaffolds examined had high tensile strengths (1.45 MPa or above) and exhibited no significant cytotoxicity toward human fetal skin fibroblasts. Finally, doxycycline hyclate was used as a model drug. The results illustrated that PNN/NPs nanofibrous scaffolds exhibited continuous drug release behavior for up to 1 week, depending on the pH and temperature.     

Electrospun nanofibrous polycaprolactone scaffolds for tissue engineering of annulus fibrosus

The annulus fibrosus comprises concentric lamellae that can be damaged due to intervertebral disc degeneration; to provide permanent repair of these acquired structural defects, one solution is to fabricate scaffolds that are designed to support the growth of annulus fibrosus cells. In this study, electrospun nanofibrous scaffolds of polycaprolactone are fabricated in random, aligned, and round-end configurations. Primary porcine annulus fibrosus cells are grown on the scaffolds and evaluated for attachment, proliferation, and production of extracellular matrix. The scaffold consisting of round-end nanofibers substantially outperforms the random and aligned scaffolds on cell adhesion; additionally, the scaffold with aligned nanofibers strongly affects the orientation of cells.     

Multilayered electrospun nanofibrous scaffolds for tailored controlled release of embelin

Polymeric electrospun meshes are highly attractive as versatile platforms for numerous biomedical applications, tissue engineering, biosensors, and controlled release of bioactive agents. Herein, we describe the preparation and characterization of multilayered nanofibrous poly(ε-caprolactone) scaffolds with different embelin content by electrospinning technique. In vitro release in physiological and acidic pH and kinetic analysis were performed. The results show that it is possible to modulate the release profile depending on the number and thickness of layers added to drug-loaded scaffold that acts as an embelin reservoir. Electrospun multilayered scaffolds present characteristics, morphology and release profiles that could be very attractive for use as embelin controlled release systems.     

Organometallic manganese complexes as scaffolds for potential molecular wires

This article reviews recent work in the area of organomanganese chemistry designing organometallic based molecular wires for potential applications in molecular electronics utilising the bottom-up approach. The field of molecular electronics has recently received much attention in the pursuit of continued miniaturization of electronics. Molecular wires that can allow a through-bridge exchange of an electron/electron hole between its remote ends/terminal groups are the basic motifs of single electron devices. Our recent work in this field has been the design and development of transition-metal complexes with a special emphasis on the half sandwich dinuclear manganese complexes and the bis dmpe dinuclear Mn(II)/Mn(II). In this review, we would like to highlight the importance of the nature of the transition metal and their significant effect on the redox process, which is of paramount importance for the design of systems that could be ultimately wired into circuits for various applications.     

Fabrication and characterization of zein-based nanofibrous scaffolds by an electrospinning method

Electrospun zein membranes were prepared using DMF as solvent. By changing the solution concentration, the electrospinning voltage and the distance between the spinneret and collector, nanofibrous meshes without bead defects could be obtained. In order to improve the mechanical strength of the hydrated zein meshes, core-shell-structured nanofibrous membranes with PCL as the core material and zein forming the shell were prepared by coaxial electrospinning. The core-shell structure of the composite fibers was confirmed by SEM characterization of the fibers, either extracted with chloroform to remove the inner PCL, or elongated to expose their cross-section. The composition and average diameter of the composite fibers could be modulated by the feed rate of the inner PCL solution. It was found that the core-shell fibrous membranes have similar wettability to the electrospun zein mesh. The presence of PCL in the fibers could significantly improve the mechanical properties of the zein membrane.     

Magnesium-containing silk fibroin/polycaprolactone electrospun nanofibrous scaffolds for accelerating bone regeneration

Bone tissue engineering has become one of the most effective methods for treating bone defects. In this study, an electrospun tissue engineering membrane containing magnesium was successfully fabricated by incorporating magnesium oxide (MgO) nanoparticles into silk fibroin and polycaprolactone (SF/PCL)-blend scaffolds. The release kinetics of Mg²⁺ and the effects of magnesium on scaffold morphology, and cellular behavior were investigated. The obtained Mg-functionalized nanofibrous scaffolds displayed controlled release of Mg²⁺, satisfactory biocompatibility and osteogenic capability. The in vivo implantation of magnesium-containing electrospun nanofibrous membrane in a rat calvarial defect resulted in the significant enhancement of bone regeneration twelve weeks post-surgery. This work represents a valuable strategy for fabricating functional magnesium-containing electrospun scaffolds that show potential in craniofacial and orthopedic applications.     

Redox-responsive degradable PEG cryogels as potential cell scaffolds in tissue engineering

A Michael addition strategy involving the reaction between a maleimide double bond and amine groups is investigated for the synthesis of cryogels at subzero temperature. Low-molecular-weight PEG-based building blocks with amine end groups and disulfide-containing building blocks with maleimide end groups are combined to synthesize redox-responsive PEG cryogels. The cryogels exhibit an interconnected macroporous morphology, a high compressive modulus and gelation yields of around 95%. While the cryogels are stable under physiological conditions, complete dissolution of the cryogels into water-soluble products is obtained in the presence of a reducing agent (glutathione) in the medium. Cell seeding experiments and toxicologic analysis demonstrate their potential as scaffolds in tissue engineering.     

Aerogel microspheres based on cellulose nanofibrils as potential cell culture scaffolds

Crosslinked poly(vinyl alcohol) (PVA)/cellulose nanofibril (CNF) hybrid aerogel micro-spheres with two different particle sizes were fabricated via a combination of the water-in-oil (W/O) emulsification process and the freeze-drying process. The aerogel micro-spheres were highly porous with a bulk density as low as 0.0047 g/cm³ for the large microspheres. The pore size of the microspheres ranged from nano- to micro-meters. Preliminary biocompatibility assays of the aerogel microspheres were investigated with NIH 3T3 cells to explore their potential application as cell culture scaffolds. The highly crosslinked aerogel microspheres were robust and were able to maintain their shape during the cell culture process. The live/dead assay showed that the cells could be seeded, attached, and proliferated on the surface of PVA/CNF aerogel microspheres. The fluorescence images showed that some of the cells migrated into the inner pores of the microspheres. Moreover, the large microspheres with larger average pore sizes had a higher cell count than that of the small microspheres. This study confirms that the PVA/CNF aerogel microspheres fabricated in this work are nontoxic and biocompatible. Furthermore, the interconnected, highly porous nanofibrous structure of the microspheres can successfully facilitate cell attachment, differentiation, and proliferation.     

Cell adhesive and growth behavior on electrospun nanofibrous scaffolds by designed multifunctional composites

Nanostructured biocomposite scaffolds of poly(l-lactide) (PLLA) blended with collagen (coll) or hydroxyapatite (HA), or both for tissue engineering application, were fabricated by electrospinning. The electrospun scaffolds were characterized for the morphology, chemical and tensile properties by scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), water contact angle (WCA), Fourier transform infrared (FTIR) measurement, and tensile testing. Electrospun biocomposite scaffolds of PLLA and collagen or (and) HA in the diameter range of 200-700 nm mimic the nanoscale structure of the extracellular matrix (ECM) with a well-interconnection pore network structure. The presence of collagen in the scaffolds increased their hydrophility, and enhanced cell attachment and proliferation, while HA improved the tensile properties of the scaffolds. The biocompatibility of the electrospun scaffolds and the viability of contacting cells were evaluated by 4',6-diamidino-2-phenylindole dihydrochloride (DAPI) nuclear staining and by fluorescein diacetate (FDA) and propidium iodide (PI) double staining methods. The results support the conclusion that 293T cells grew well on composite scaffolds. Compared with pure PLLA scaffolds a greater density of viable cells was seen on the composites, especially the PLLA/HA/collagen scaffolds.     

Improved cellular response on multiwalled carbon nanotube-incorporated electrospun polyvinyl alcohol/chitosan nanofibrous scaffolds

We report the fabrication of multiwalled carbon nanotube (MWCNT)-incorporated electrospun polyvinyl alcohol (PVA)/chitosan (CS) nanofibers with improved cellular response for potential tissue engineering applications. In this study, smooth and uniform PVA/CS and PVA/CS/MWCNTs nanofibers with water stability were formed by electrospinning, followed by crosslinking with glutaraldehyde vapor. The morphology, structure, and mechanical properties of the formed electrospun fibrous mats were characterized using scanning electron microscopy, Fourier transform infrared spectroscopy, and mechanical testing, respectively. We showed that the incorporation of MWCNTs did not appreciably affect the morphology of the PVA/CS nanofibers; importantly the protein adsorption ability of the nanofibers was significantly improved. In vitro cell culture of mouse fibroblasts (L929) seeded onto the electrospun scaffolds showed that the incorporation of MWCNTs into the PVA/CS nanofibers significantly promoted cell proliferation. Results from this study hence suggest that MWCNT-incorporated PVA/CS nanofibrous scaffolds with small diameters (around 160 nm) and high porosity can mimic the natural extracellular matrix well, and potentially provide many possibilities for applications in the fields of tissue engineering and regenerative medicine.