Duplex stability of DNA.DNA and DNA.RNA duplexes containing 3'-S-phosphorothiolate linkages

3'-S-Phosphorothiolate (3'-SP) linkages have been incorporated into the DNA strand of both a DNA.RNA duplex and a DNA.DNA duplex. Thermal melting (T(m)) studies established that this modification significantly stabilises the DNA.RNA duplex with an average increase in T(m) of about 1.4 degrees C per modification. For two or three modifications, the increase in T(m) was larger for an alternating, as compared to the contiguous, arrangement. For more than three modifications their arrangement had no effect on T(m). In contrast to the DNA.RNA duplex, the 3'-S-phosphorothiolate linkage destabilised the DNA.DNA duplex, irrespective of the arrangement of the 3'-SP linkages. The effect of ionic strength on duplex stability was similar for both the phosphorothiolate-substituted and the unmodified RNA.DNA duplexes. The results are discussed in terms of the influence that the sulfur atom has on the conformation of the furanose ring and comparisons are also drawn between the current study and those previously conducted with other modifications that have a similar conformational effect.     

Solving the 3-SAT problem based on DNA computing

The 3-SAT problem is an NP-complete problem, and many algorithms based on DNA computing have been proposed for solving it since Adleman's pioneering work. This paper presents a new algorithm based on the literal string strategy proposed by Sakamoto et al. Simulation results show that the maximal number of literal strings produced during the computing process is greatly reduced. Moreover, the length of the literal strings is also reduced from m to n at most.     

Visualization of DNA sequences based on 3DD-Curves

In this paper we (1) introduce a new 3D graphical representation of DNA sequences; (2) visualize DNA sequences based on 3DD-Curves; (3) provide a new invariant of DNA sequences based on our 3DD-Curve. All this represents a new development of graphical representation and numerical characterization for DNA sequences.     

Electrochemical detection of DNA 3′-phosphatases based on surface-extended DNA nanotail strategy

Determination of DNA dephosphorylation is of great value due to its vital role in many cellular processes. Here we report a surface-extended DNA nanotail strategy for simple and ultrasensitive detection of DNA 3′-phosphatases by terminal deoxynucleotidyl transferase (TdT) mediated signal amplification. In this work, DNA probes labeled with thiols at their 5′ terminals and phosphoryls at 3′ terminals are immobilized on gold electrode and are used as substrates for DNA 3′-phosphatases, taking T4 polynucleotide kinase phosphatase (T4PNKP) as an example. T4PNKP can catalyze the dephosphorylation reaction of the substrate DNA, followed by the formation of a long DNA strand by TdT on its 3′ terminal hydroxyl, leading to an evident chronocoulometry signal enhancement. The proposal presents a considerable analytical performance with low detection limit and wide linear range, making it promise to be applied in the fields of DNA dephosphorylation related processes, drug discovery, and clinical diagnostics.     

Preparation of DNA Markers Based on E. Coli Plasmid DNA

DNA fragments of various length were produced by enzymatic restriction of plasmid DNA from various strains of E. coli. A molecular DNA marker was constructed based on the DNA restricts.     

Study on the adsorption of DNA on Fe3O4 nanoparticles and on ionic liquid-modified Fe3O4 nanoparticles

We have investigated the adsorption of herring sperm DNA on Fe₃O₄ magnetic nanoparticles (NPs) before and after modification with the ionic liquid 1-hexyl-3-methylimidazolium bromide. Experiments were performed in a batch mode, and the effects of DNA concentration, pH of the sample solution, ionic strength, temperature, and contact time between reagents were optimized. An evaluation of the adsorption isotherm revealed that the Langmuir model better fits the equilibrium data than the Freundlich model. The maximum adsorption capacities of the unmodified and modified NPs, respectively, were found to be 11.8 and 19.8 mg DNA per gram of adsorbent. The adsorption of DNA onto the modified NPs was endothermic, while it was exothermic in the case of the unmodified NPs. The DNA can be desorbed from the modified surfaces of the NPs by using EDTA as the eluent. The NPs were able to adsorb about 90?±?1.5 % of DNA after being recycled for three times. The method is simple, fast, robust, and does not require organic solvents or sophisticated equipment.

Dynamics of electron transport by elastic bending of short DNA duplexes. Experimental study and quantitative modeling of the cyclic voltammetric behavior of 3'-ferrocenyl DNA end-grafted on gold

The dynamics of electron transport within a molecular monolayer of 3'-ferrocenylated-(dT)(20) strands, 5'-thiol end-grafted onto gold electrode surfaces via a short C2-alkyl linker, is analyzed using cyclic voltammetry as the excitation/measurement technique. It is shown that the single-stranded DNA layer behaves as a diffusionless system, due to the high flexibility of the ss-DNA chain. Upon hybridization by the fully complementary (dA)(20) target, the DNA-modified gold electrode displays a highly unusual voltammetric behavior, the faradaic signal even ultimately switching off at a high enough potential scan rate. This remarkable extinction phenomenon is qualitatively and quantitatively justified by the model of elastic bending diffusion developed in the present work which describes the motion of the DNA-borne ferrocene moiety as resulting from the elastic bending of the duplex DNA toward and away from the electrode surface. Its use allows us to demonstrate that the dynamics of electron transport within the hybridized DNA layer is solely controlled by the intrinsic bending elasticity of ds-DNA. Fast scan rate cyclic voltammetry of end-grafted, redox-labeled DNA layers is shown to be an extremely efficient method to probe the bending dynamics of short-DNA fragments in the submillisecond time range. The persistence length of the end-anchored ds-DNA, a parameter quantifying the flexibility of the nanometer-long duplex, can then be straightforwardly and accurately determined from the voltammetry data.     

Independence of photoproduct formation on DNA conformation.

Abstract— In an ethanolic solution native T7 DNA can undergo conformational transitions from the B conformation (0% ethanol) to the C-like (60% w/w ethanol) and the A (80% w/w ethanol) conformations. We have investigated the formation of three classes of thymine-derived photoproducts in T7 DNA irradiated (280 nm) in the B, C-like, and A conformations, which were monitored by circular dichroism measurements. We find that the predominant class of thymine-derived photoproducts in any conformational state is cyclobutyl dipyrimidines. While the ‘spore product,’ 5-thyminyl-5,6-dihydrothymine, which belongs to another class of photoproductsf does form in native DNA in the A conformation, its yield in denatured DNA at 80% ethanol is the same as that in native DNA. The yield of pyrimidine adduct, a third photoproduct class, is a maximum at 50–60% ethanol. This effect of ethanol is probably not due to the ethanol-induced C-like conformation, however, since pyrimidine adduct formation is not enhanced when T7 DNA is irradiated in the C conformation in 6 M CsCl or in intact phage. We conclude from these and other data in the literature that the degree of hydration rather than the conformational state is the critical factor in determining which of the photoproducts will form in native DNA.     

Single-molecule studies on DNA and RNA.

DNA and RNA are the most individual molecules known. Therefore, single-molecule experiments with these nucleic acids are particularly useful. This review reports on recent experiments with single DNA and RNA molecules. First, techniques for their preparation and handling are summarised including the use of AFM nanotips and optical or magnetic tweezers. As important detection techniques, conventional and near-field microscopy as well as fluorescence resonance energy transfer (FRET) and fluorescence correlation spectroscopy (FCS) are touched on briefly. The use of single-molecule techniques currently includes force measurements in stretched nucleic acids and in their complexes with binding partners, particularly proteins, and the analysis of DNA by restriction mapping, fragment sizing and single-molecule hybridisation. Also, the reactions of RNA polymerases and enzymes involved in DNA replication and repair are dealt with in some detail, followed by a discussion of the transport of individual nucleic acid molecules during the readout and use of genetic information and during the infection of cells by viruses. The final sections show how the enormous addressability in nucleic acid molecules can be exploited to construct a single-molecule field-effect transistor and a walking single-molecule robot, and how individual DNA molecules can be used to assemble a single-molecule DNA computer.     

3D-ordered macroporous materials comprising DNA

Macroporous materials comprising DNA were fabricated with the colloidal crystal template. First, DNA and diazoresin (DR) molecules are fully filled into the voids of a colloidal crystal template. After thermal treatment and removal of the colloids, DNA porous materials with highly ordered structure were obtained. In the process of thermal treatment the cross-linking reaction takes place between DR and DNA, which plays an important role for sustaining the porous framework. The DNA porous materials will turn into a fluorescent DNA/dye composite after staining with Hoechst 33258 (Hoe), a characteristic fluorescent dye for DNA. This kind of composite DNA porous material may have potential applications in optical devices.     

Influence of the pH on separating DNA by high-speed microchip electrophoresis.

Various factors are critical in resolving DNA molecules at high speed, including the separation medium, concentration, composition, and pH of the buffer, as well as the electric field strength. To this study, considered the composition of a buffer and the difference in the pH, while paying attention to whether the separation ability changes in the microchip electrophoresis of DNA. DNA separation was particularly affected by both the buffer composition and the pH. Under the optimal microchip electrophoresis conditions that were determined in this study, an improved resolution of a wider range of DNA fragment sizes was achieved. Moreover, the total separation time decreased from 240 s to 100 s. Thus, by simplifying and improving the DNA electrophoresis in the microchip, this technique is now widely applicable to several different scientific fields.     

Signal amplification for DNA detection based on the HRP-functionalized Fe3O4 nanoparticles

An electrochemical approach for the sensitive detection of sequence-specific DNA has been developed. Horseradish peroxidase (HRP) assembled on the Fe₃O₄ nanoparticles (NPs) were utilized as signal amplification sources. High-content HRP was adsorbed on the Fe₃O₄ NPs via layer-by-layer (LbL) technique to prepare HRP-functionalized Fe₃O₄ NPs. Signal probe and diluting probe were then immobilized on the HRP-functionalized Fe₃O₄ NPs through the bridge of Au NPs. Thereafter, the resulting DNA-Au-HRP-Fe₃O₄ (DAHF) bioconjugates were successfully anchored to the gold nanofilm (GNF) modified electrode surface for the construction of sandwich-type electrochemical DNA biosensor. The electrochemical behaviors of the prepared biosensor had been investigated by the cyclic voltammetry (CV), chronoamperometry (i-t), and electrochemical impedance spectroscopy (EIS). Under optimal conditions, the proposed strategy could detect the target DNA down to the level of 0.7 fmol with a dynamic range spanning 4 orders of magnitude and exhibited excellent discrimination to two-base mismatched DNA and non-complementary DNA sequences.