Organometallic complexes for nonlinear optics: Part 31. Cubic hyperpolarizabilities of ferrocenyl-linked gold and ruthenium complexes

The complexes [Fe{η-C₅H₄---(E)---CH=CH---4-C₆H₄CCX}₂] [X=SiMe₃ (1), H (2), Au(PCy₃) (3), Au(PPh₃) (4), Au(PMe₃) (5), RuCl(dppm)₂ (7), RuCl(dppe)₂ (8)] and [Fe{η-C₅H₄---(E)---CH=CH---4-C₆H₄CH=CRuCl(dppm)₂}₂](PF₆)₂ (6) have been prepared and the identities of 1 and 7 confirmed by single-crystal X-ray structural studies. Complexes 1–8 exhibit reversible oxidation waves in their cyclic voltammograms attributed to the Fe^II/III couple of the ferrocenyl groups, 6–8 also showing reversible (7, 8) or non-reversible (6) processes attributed to Ru-centered oxidation. Cubic nonlinearities at 800 nm by the Z-scan method are low for 1–5; in contrast, complexes 6 and 7 exhibit large negative γ_real and large γ_imag values. A factor of 4 difference in γ and two-photon absorption cross-section σ₂ values for 6 and 7 suggest that they have potential as protically switchable NLO materials.     

Compromise between conjugation length and charge-transfer in nonlinear optical η-monocyclopentadienyliron(II) complexes with substituted oligo-thiophene nitrile ligands: Synthesis, electrochemical studies and first hyperpolarizabilities

A systematic series of η⁵-monocyclopentadienyliron(II) complexes with substituted oligo-thiophene nitrile ligands of general formula [FeCp(P_P)(NC{SC₄H₂}_nNO₂)][PF₆] (P_P = dppe, (+)-diop; n = 1-3) has been synthesized and characterized. The electrochemical behaviour of the new compounds was explored by cyclic voltammetry. Quadratic hyperpolarizabilities (β) of the complexes with dppe coligands have been determined by hyper-Rayleigh scattering (HRS) measurements at two fundamental wavelengths of 1.064 and 1.550 μm, to uncover the two-photon resonance effect and to estimate static β values. The obtained overall results are found to be better than for the related η⁵-monocyclopentadienyliron(II) complexes with p-benzonitrile derivatives. Although an increase of the resonant β at 1.064 μm with increasing number of thiophene units in the conjugated ligand was found (up to 910 × 10⁻³⁰ esu), the static values β₀ remain practically unchanged, as shown by the 1.550 μm measurements. Combined with the electrochemical and spectroscopic data (IR, NMR, UV-vis), this remarkable evolution of β shows that the increase of conjugation length is balanced by a decrease in charge-transfer efficiency.     

Synthesis and structural characterization of ruthenium(II) and iron(II) complexes containing 1,2-di-(2-thienyl)-ethene derived ligands as chromophores

A new family of three-legged piano stool structured organometallic compounds containing the η⁵-cyclopentadienylruthenium(II)/iron(II) fragments {M(η⁵-C₅H₅) (DPPE)}⁺, {Ru(η⁵-C₅H₅)(PPh₃)₂}⁺ and {Ru(η⁵-C₅H₅)(TMEDA)}⁺ with coordinated thiophene based chromophores, namely 5-(2-thiophen-2-yl-vinyl)-thiophene-2-carbonitrile (L1) and 5-[2-(5-Nitro-thiophen-2-yl)-vinyl]-thiophene-2-carbonitrile (L2) has been synthesized and fully characterized by ¹H, ¹³C, ³¹P NMR, IR and UV-Vis spectroscopies. Also, electrochemical studies were carried out by cyclic voltammetry and all experimental data are interpreted and compared with related compounds under the scope of NLO properties. Compounds [Ru(η⁵-C₅H₅)(DPPE)(NC(C₄H₂S)C(H)C(H)(C₄H₃S))][CF₃SO₃] (1′Ru) [Fe(η⁵-C₅H₅)(DPPE)(NC(C₄H₂S)C(H)C(H)(C₄H₃S))] [PF₆] (1Fe) and [Ru(η⁵-C₅H₅)(DPPE)(NC(C₄H₂S)C(H)C(H)(C₄H₂S)NO₂)][CF₃SO₃] (4′Ru) were also crystallographically characterized.     

Organometallic complexes for nonlinear optics: Part 32: Synthesis, optical spectroscopy and theoretical studies of some osmium alkynyl complexes

The complexes trans-[Os(CCPh)Cl(dppe)₂] (1), trans-[Os(4-CCC₆H₄CCPh)Cl(dppe)₂] (2), and 1,3,5-{trans-[OsCl(dppe)₂(4-CCC₆H₄CC)]}₃C₆H₃ (3) have been prepared. Cyclic voltammetric studies reveal a quasi-reversible oxidation process for each complex at 0.36–0.39 V (with respect to the ferrocene/ferrocenium couple at 0.56 V), assigned to the Os^II/III couple. In situ oxidation of 1–3 using an optically transparent thin-layer electrochemical (OTTLE) cell affords the UV–Vis–NIR spectra of the corresponding cationic complexes 1⁺–3⁺; a low-energy band is observed in the near-IR region (11 000–14 000 cm⁻¹) in each case, in contrast to the neutral complexes 1–3 which are optically transparent below 20 000 cm⁻¹. Density functional theory calculations on the model compounds trans-[Os(CCPh)Cl(PH₃)₄] and trans-[Os(4-CCC₆H₄CCPh)Cl(PH₃)₄] have been used to rationalize the observed optical spectra and suggest that the low-energy bands in the spectra of the cationic complexes can be assigned to transitions involving orbitals delocalized over the metal, chloro and alkynyl ligands. These intense bands have potential utility in switching nonlinear optical response, of interest in optical technology.     

Synthesis of organometallic Ru(II) and Fe(II) complexes containing fused rings hemi-helical ligands as chromophores. Evaluation of non-linear optical properties by HRS

A new family of three-legged piano stool structured organometallic compounds containing the fragment η⁵-cyclopentadienyl-ruthenium(II)/iron(II) has been synthesized to evaluate the existence of electronic metal to ligand charge transfer upon coordination of the novel benzodithiophene ligands (BDT), benzo[1,2-b;4,3-b′]dithiophen-2-carbonitrile (L1) and benzo[1,2-b;4,3-b′]dithiophen-2′nitro-2-carbonitrile (L2). All the compounds were characterized by ¹H, ¹³C, ³¹P NMR, IR and UV-Vis. spectroscopies and their electrochemistry studied by cyclic voltammetry. The X-ray structures of [Ru(η⁵-C₅H₅)(PPh₃)₂(NCC₁₀H₅S₂)][PF₆] (1Ru), [Ru(η⁵-C₅H₅)(PPh₃)₂(NCC₁₀H₅S₂)][CF₃SO₃] (1′Ru), [Ru(η⁵-C₅H₅)(DPPE)(NCC₁₀H₅S₂)][PF₆] 2Ru and [Fe(η⁵-C₅H₅)(DPPE)(NCC₁₀H₅S₂)][PF₆] (2Fe) were determined by X-ray diffraction showing centric crystallization on groups and P2₁/n, respectively.Quadratic hyperpolarizabilities (β) of some of the complexes (2Fe, 2Ru and 3Fe) have been determined by hyper-Rayleigh scattering (HRS) measurements at a fundamental wavelength of 1500 nm, to minimize the probability of fluorescence due to two-photon absorption and to reduce the effect of resonance enhancement, in order to estimate static β values.     

Organometallic complexes for nonlinear optics. 41: Syntheses and quadratic NLO properties of 4-{4-(4-nitrophenyl)diazophenyl}ethynylphenylethynyl complexes

The syntheses of [Au(CC-4-C₆H₄CC-4-C₆H₄NN-4-C₆H₄NO₂)(PPh₃)] (3), trans-[Ru(CC-4-C₆H₄-CC-4-C₆H₄NN-4-C₆H₄NO₂)Cl(dppm)₂] (4), [Ru(CC-4-C₆H₄CC-4-C₆H₄NN-4-C₆H₄NO₂)(dppe)(η-C₅Me₅)] (5), and [Ni(CC-4-C₆H₄NN-4-C₆H₄NO₂)(PPh₃)(η-C₅H₅)] (6) are reported, together with a single-crystal X-ray diffraction study of 4. Quadratic nonlinearities for 3–6 and [Ru(CC-4-C₆H₄NO₂)(dppe)(η-C₅Me₅)] (7) have been determined at 1.064 μm and 1.300 μm by the hyper-Rayleigh scattering (HRS) technique, comparison to related complexes revealing that β values increase on introduction of azo group and π-system lengthening.     

Optically active transition metal complexes. Part 119:New rhodium(I) complexes containing two different types of optically active ligands

The synthesis of novel rhodium(I) complexes containing two different chiral ligands is described. These ligands are on the one hand (−)-diop and on the other hand various optically active pyrroleimines, which derive from 1-phenylethylamine or 1-cyclohexylethylamine with an (R)- or (S)-configuration. The resulting (−)-diop–pyrrolylimine–rhodium(I) complexes are diastereomers and are expected to give different stereoselectivities in enantioselective catalysis (double stereoselection). In addition, the synthesis of novel rhodium(I) complexes containing 1,5-cyclooctadiene and various chiral pyrroleoxazoline ligands is described. All the complexes are used in the enantioselective hydrogenation of ketopantolactone (see following paper).     

Spectral studies, cyclic voltammetry and synthesis of cobalt(II) and ruthenium(III) complexes with symmetric and asymmetric ring containing membered N2S2, N4, and N5 donor macrocyclic ligands

Reaction of divalent cobalt(II) and trivalent ruthenium(III) salts (NO3, SCN and SO4) with macrocyclic ligands L1, L2 and L3 having N2S2, N4 and N5 core, have been designed and carry out. All these three macrocyclic ligands and their complexes were obtained in pure form. Their structures were investigated by using microanalytical analyses, IR, mass, magnetic moments, electronic and EPR spectral studies. The redox properties of the complexes were also examined by cyclic voltammetry. An interesting feature of complexes is that the relatively large rings of macrocyclic ligands prevent the macrocyclic rings from approaching the metal center as closely as they would, if they were not constrained. So the Ru-N distances are longer than expected due to ring size. Electrochemical studies show that the macrocyclic ligand L1 is more effective electron donors to ruthenium than of L2 and L3. Electronic spectral properties also show that the sulphur donor atom of L1 weakens the ligand field with respect to ligand-to-metal charge-transfer band. However it is expected that second-row transition metal-ligand bonds tend to be weaker than third-row transition metal-ligand bonds. There are well-established examples of reactions in which decreased of reactivity down a triad of transition metals is not observed. These novelties are usually attributed to pi-bonding effects for ligands such as carbon monoxide, solvent effects, or a change in mechanism.     

Diastereomeric half-sandwich Ru(II) cationic complexes containing amino amide ligands. Synthesis, solution properties, crystal structure and catalytic activity in transfer hydrogenation of acetophenone

The cationic complexes [(η⁶-arene)Ru(N,O-amino amide)X]Y (arene = p-cymene or indane; N,O-amino amide = (l)-proline amide or (l)-phenylalanine amide; X = Cl or I; Y = Cl, I or PF₆) have been synthesised and fully characterized by spectroscopic and analytical methods. In several cases (1a, 3a, 4a, 4b, 5) the metal configuration has been definitively established by X-ray analysis on single crystal. The lability of the metal center in solution has been studied by ¹H NMR and CD techniques. The highest configurational stability has been found in the complexes of the type [(η⁶-indane)Ru(N,O-proline amide)Cl]Y (4a,b). The complexes 1b, 2a-b, 3b, 4b and 5 are good precatalysts for the transfer hydrogenation of acetophenone in basic i-PrOH, with ee up to 76% at 30 °C. An ESI(+)-MS study of pre-catalytic solutions has provided useful information on the catalytic mechanism.     

Synthesis and structure of mononuclear copper(II) complexes with acyclic Schiff-base ligands containing organotellurium substituents: a comparative study with selenium analogs

Tellurium-bearing acyclic Schiff bases, 2,6-bis({N-[2-(phenyltellurato)ethyl]}benzimidoyl)-4-methylphenol (HL³ ) and 2,6-bis({N-[3-(phenyltellurato)propyl]}benzimidoyl)-4-methylphenol (HL⁴ ) of the Te₂N₂O type have been prepared by condensation of 4-methyl-2,6-dibenzoylphenol (mdbpH) with the appropriate phenyltellurato(alkyl)amine. HL³ and HL⁴ have been characterized by mass spectrometry, IR, electronic and ¹H-NMR spectroscopies and cyclic voltammetry. Their reactions with Cu(II) acetate monohydrate in a 2?:?1 molar ratio in methanol yield [(C₆H₂(O)(Me){(C₆H₅)C=N(CH₂)_nTe(C₆H₅)}{(C₆H₅)C=O})₂Cu] (3 (n?=?2), 4 (n?=?3)) as suggested by analytical and spectroscopic data and single crystal X-ray crystallography of 3. In both complexes, one arm of the ligand undergoes hydrolysis at the C=N position and two molecules of the partially hydrolyzed ligand coordinate to Cu(II) through imido nitrogen and the phenolic oxygen. The telluriums do not form part of the copper(II) distorted square planar coordination sphere which has a trans-CuN₂O₂ core. Electrochemical studies of 3 and 4 indicate quasi-reversible reductions (E°′?=??1.113?V (3) and ?1.149?V (4)) corresponding to the reduction of copper(II) to copper(I). The interactions of 3 and 4 with calf thymus DNA, investigated by spectrophotometry and cyclic voltammetry, indicate that 3 and 4 bind to DNA via intercalation, and the binding affinity of 3 is lower than that of its selenium analog.     

Synthesis and structural characterization of new 2-bromo-1,3-bis(triazol-1-ylmethyl)benzene ligands. Study of their behavior as complexing agents for determination of nickel(II) by adsorptive stripping voltammetry

Reaction of 2-bromo-1,3-bis(bromomethyl)benzene (1) with 1,2,3-triazole and benzotriazole yields 2-bromo-1,3-bis(triazol-1-ylmethyl)benzene (2) and 2-bromo-1,3-bis(benzotriazol-1-ylmethyl)benzene (3), isolated as white solids, air stable at room temperature, and characterized by elemental analysis, mass spectra, IR, and NMR (¹H, ¹³C) spectroscopy. The molecular structure of 3 was determined by single-crystal X-ray diffraction. These ligands were evaluated for determination of ultra-trace concentrations of nickel by adsorptive stripping voltammetry. The method is based on adsorptive accumulation of the Ni(II)-L complex onto a hanging mercury drop electrode, followed by reduction of the adsorbed species by voltammetric scan using square wave modulation. However, only with 2 was a signal observed at ?0.81?V. Under the best experimental conditions (pH 5.5; ligand concentration 0.30?μmol?L^?1; adsorptive potential (E _ads) ?0.70?V and adsorptive time (t _ads) 80 s), the peak current is proportional to the Ni(II) concentration to 15.0?μg?L^?1, with a 3 detection limit of 0.2?μg?L^?1. The proposed method was validated by determining Ni(II) in certified reference waste water (SPS–WW1) with satisfactory results.     

Syntheses,structures and electrochemistry of manganese(III) complexes derived from N,N′-o-phenylenebis(3-ethoxysalicylaldimine): Efficient catalyst for styrene epoxidation

Syntheses, characterizations, electrochemistry and catalytic properties for styrene epoxidation of three manganese(III) compounds [Mn^IIIL¹(H₂O)(MeOH)](ClO₄) (1) [Mn^IIIL¹(N₃)(H₂O)]·dmf (2) [Mn^IIIL¹(Cl)(H₂O)] (3) derived from the Schiff base compartmental ligand N,N′-o-phenylenebis(3-ethoxysalicylaldimine) (H₂L¹) are reported. The three compounds are characterized by elemental analyses, IR, mass and UV–Vis spectra and conductance values. Single crystal X-ray structures of 1 and 2 have been determined. The structures of 1 and 2 show that these are mononuclear compounds having a salen type structure. In both structures, a dinuclear species is formed by bifurcated hydrogen bonding involving coordinated water molecule. The coordination of chloride in 3 is shown by conductance measurements. The compounds have also been characterized by UV–Vis and mass spectroscopic studies. Cyclic voltammetric and square wave voltammetric studies of the three compounds reveal that these undergo Mn(III)/Mn(II) reduction reversibly with the order of the ease of reduction as 3 > 2 > 1. This order has been explained proposing the composition of active species in solution. Catalytic properties for epoxidation of styrene by all the three complexes using PhIO and NaOCl as oxidant have been studied. The order of both the styrene conversion and styrene epoxidation using the three title compounds is 3 > 1 > 2. Again, it has been observed that more efficient conversion and epoxidation take place when PhIO is used as oxidant.     

Benign synthesis of carboxamide ligands,H2Me2bqb and H2Me2bpb. Preparation,characterization and electrochemistry of Ni(II) complexes: The crystal structure of [Ni(Me2bqb)]

A novel and highly efficient approach for the synthesis of H₂Me₂bqb and H₂Me₂bpb using ionic liquid as an environmentally benign reaction medium has been developed, eliminating the need for the pyridine as a toxic solvent. The Ni(II) complex of the dianionic ligand Me₂bqb²⁻, [Me₂bqb²⁻ = 1,2-bis(quinoline-2-carboxamide)-4,5-dimethyl-benzene dianion], has been synthesized and characterized by elemental analyses and spectroscopic methods, and the crystal and molecular structure of [Ni(Me₂bqb)] (1), has been determined by X-ray crystallography. The complex exhibits distorted square-planar NiN₄ coordination geometry with two short and two long Ni–N bonds (Ni–N ∼1.85 and ∼1.96 Å, respectively). The electrochemical behavior of [Ni(Me₂bqb)] (1), has been studied by cyclic voltammetry and compared with the analogous complex, [Ni(Me₂bpb)] (2).     

Chiral self-assembly of triorganotin complexes: Syntheses, characterization, crystal structures and antitumor activity of organotin(IV) complexes containing (R)-(+)-methylsuccinic acid, (S)-(+)-methylglutaric acid and l-(−)-malic acid ligands

Six new chiral triorganotin(IV) complexes, {(R₃Sn)₂[C₃H₆(COO)₂]}_n (R = Me: 1; Bu: 2), {(R₃Sn)₂[C₄H₈(COO)₂]}_n (R = Me: 3; Bu: 4), and {(R₃Sn)₂[C₂H₄O(COO)₂]}_n (R = Me: 5; Bu: 6) have been prepared by treatment of (R)-(+)-methylsuccinic acid, (S)-(+)-methylglutaric acid and l-(−)-malic acid, with the corresponding R₃SnCl (R = Me, Bu) and sodium ethoxide in methanol. All the complexes were characterized by elemental analysis, FT-IR, NMR (¹H, ¹³C, ¹¹⁹Sn) spectroscopy and TGA. Except for 3, all of the complexes were also characterized by X-ray crystallography. The structural analyses reveal that complexes 1 and 5 have 2D network structures in which (R)-(+)-methylsuccinic acid and l-(−)-malic acid act as tetradentate ligands coordinated to trimethyltin(IV) ions. Complexes 2 and 4 have 3D metal-organic framework structures in which the deprotoned acids serve as tetradentate ligands. Complex 6 adopts a 1D zigzag chain structure and forms a 2D supramolecular framework through intermolecular C-H?O interactions. In addition, the antitumor activities of complexes 1-6 have been studied. We also have measured the specific rotation of the chiral dicarboxylic acids and the organotin derivatives.     

Protonation of magnesium and sodium complexes containing dianionic diimine ligands. Molecular structures of 1,2-bis{(2,6-diisopropylphenyl)imino}acenaphthene (dpp-BIAN), [(dph-BIAN)H<Subscript>2</Subscript>(Et<Subscript>2</Subscript>O)], and [(dpp-BIAN)HNa(Et<Subscript>2</Subscript>O)]

Hydrolysis of magnesium complexes containing the dianionic acenaphthenediimine ligands, (dpp-BIAN)Mg(thf)₃ (1), (dph-BIAN)Mg(thf)₃ (2), and (dtb-BIAN)Mg(thf)₂ (3) (dpp-BIAN is 1,2-bis{ (2,6-diisopropylphenyl)imino}acenaphthene; dph-BIAN is 1,2-bis{(2-diphenyl)imino}acenaphthene; dtb-BIAN is 1,2-bis{(2,5-di-tert-butylphenyl)imino}acenaphthene), affords the corresponding diamines (dpp-BIAN)H₂ (4), (dph-BIAN)H₂(Et₂O) (5), and (dtb-BIAN)H₂ (6). Compounds 4 and 5 were isolated in the crystalline state and characterized by UV-Vis, IR, and ¹H NMR spectroscopy. Partial hydrolysis of (dpp-BIAN)Na₂(Et₂O)₃ gave the crystalline (dpp-BIAN)HNa(Et₂O)₂ complex (7), which was also characterized by spectroscopic methods. The structures of compounds 5 and 7 and free diimine dpp-BIAN were established by X-ray diffraction analysis.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2634–2640, December, 2004.