Studies on the Adsorption and Dissociation of Methane and Carbon Dioxide on Nickel

The adsorption and dissociation of methane and carbon dioxide for reforming on nickel catalysts were extensively investigated by TPSR, TPD, XPS and pulse reaction methods. These studies showed that the decomposition of methane results in the formation of at least three kinds of surface carbon species on supported nickel catalysts. Carbidic Cα, carbonaceous Cβ and carbidic clusters Cγ surface carbon species formed by the decomposition of methane demonstrated different surface mobility, thermal stability and reactivity. Carbidic Cα is a very active and important intermediate in carbon dioxide reforming with methane, and the carbidic clusters Cγ species might be the precursor of surface carbon deposition. The partially dehydrogenated Cβ species can react with H2 or CO2 to form CH4 or CO. On the other hand, it was proven that CO2 can be weakly adsorbed on supported nickel catalysts, and only one kind of CO2 adsorption state is formed. The interaction mechanism between the species dissociated from CH4 and CO2 during reforming was then hypothesized.     

甲烷与二氧化碳重整制取合成气反应的研究 (I)Sr_(1-x)La_xNiAl_(11)O_(19)催化活性表征

对具有磁铅石结构的Ｓｒ１－ｘＬａｘＮｉＡｌ１１Ｏ１９对甲烷与二氧化碳重整反应的催化活性、积炭量和稳定性进行了研究．不同还原温度下催化剂的ＸＲＤ和催化活性的实验结果表明，金属镍是ＣＨ４＋ＣＯ２重整反应的活性组分，金属镍含量越大，反应活性越高．反应后催化剂积炭量的分析结果说明，在相同镍含量和分散度的情况下，Ｌａ３＋离子对Ｓｒ２＋离子调变，可以降低催化剂的表面酸性，提高催化剂的抗积炭能力．ＬａＮｉＡｌ１１Ｏ１９是一种具有较好催化活性、稳定性和抗积炭性能的催化剂．     

Effects of CO2 content on the activity and stability of nickel catalyst supported on mesoporous nanocrystalline zirconia

The effects of carbon dioxide content on the catalytic performance and coke formation of nickel catalyst supported on mesoporous nanocrystalline zirconia with high surface area and pure tetragonal crystalline phase were investigated in methane reforming with carbon dioxide. The samples were characterized by XRD, BET, TPR, TPO, TPH, TEM, and SEM techniques. The catalyst prepared showed high surface area and a mesoporous structure with a narrow pore size distribution. The obtained results revealed that the increase in CO2 content increased the methane conversion and stability of the catalyst and significantly reduced the coke deposition. The TPH analysis showed that several species of carbon with different reactivities toward hydrogenation were deposited on the spent catalysts employed under different CO2 contents.     

甲烷在Ni/TiO2催化剂表面的活化

考察了Ni/TiO2催化剂甲烷部分氧化和二氧化碳重整制合成气的反应活性,实验表明,以TiO2为载体的镍系催化剂对于甲烷部分氧化制合成气反应具有较好的活性,尤其对H2的选择性较高,对二氧化碳重整制合成气反应具有较好的低温反应活性.采用脉冲-质谱在线分析等技术,在无气相氧条件下向Ni/TiO2催化剂脉冲CH4,发现甲烷在催化剂表面的活化（转化）及其氧化产物的选择性与金属催化剂表面氧的浓度密切相关.CH4与Ni/TiO2催化剂作用过程中存在明显的氢溢流和氧溢流现象,可能是这种溢流效应使得Ni/TiO2催化剂具有良好的反应活性和抗积碳性能.     

甲烷在Ni/TiO_2催化剂表面的活化

考察了Ｎｉ／ＴｉＯ２催化剂甲烷部分氧化和二氧化碳重整制合成气的反应活性,实验表明,以ＴｉＯ２为载体的镍系催化剂对于甲烷部分氧化制合成气反应具有较好的活性,尤其对Ｈ２的选择性较高,对二氧化碳重整制合成气反应具有较好的低温反应活性．采用脉冲－质谱在线分析等技术,在无气相氧条件下向Ｎｉ／ＴｉＯ２催化剂脉冲ＣＨ４,发现甲烷在催化剂表面的活化（转化）及其氧化产物的选择性与金属催化剂表面氧的浓度密切相关．ＣＨ４与Ｎｉ／ＴｉＯ２催化剂作用过程中存在明显的氢溢流和氧溢流现象,可能是这种溢流效应使得Ｎ／ＴｉＯ２催化剂具有良好的反应活性和抗积碳性能．     

Rh/SiO_2催化剂上甲烷部分氧化制合成气的反应机理

采用原位Raman光谱技术,在原料气中的O2未完全耗尽的条件下,对CH4部分氧化制合成气反应的Rh/SiO2催化剂床层前部贵金属物种的化学态以及由CH4解离所生成的碳物种进行了表征.在此基础上采用脉冲反应和同位素示踪技术,比较了CH4的部分氧化及其与H2O和CO2的重整等反应对催化剂床层氧化区内CO和H2生成的相对贡献,并将实验结果与Ra-man光谱表征结果进行了关联.结果表明,在600°C下将还原后的4%Rh/SiO2催化剂切入CH4:O2:Ar=2:1:45原料气,催化剂床层前部未检测到铑氧化物的Raman谱峰,但可清晰检测到源于CH4解离的碳物种;在700°C和接触时间小于1ms的条件下,催化剂床层的氧化区内已有大量CO和H2生成,在相同的实验条件下,CH4与H2O或CO2重整反应对氧化区内合成气生成的贡献则很小;以CH4:16O2:H218O:He=2:1:2:95为原料气的同位素示踪实验结果表明,在原料气中16O2未完全耗尽的情况下,反应产物中C16O的含量占CO生成总量的92.3%,表明CO主要来自CH4的部分氧化反应.上述结果均表明,在O2存在下Rh/SiO2催化剂上CO和H2可以通过CH4直接解离和部分氧化机理生成.     

甲烷干气重整反应中镍基催化剂上表面积碳研究(英文)

镍基催化剂上积碳是甲烷干气重整反应急需解决的关键问题。实验采用ＴＰＳＲ、ＴＰＤ、ＸＰＳ和脉冲反应等方法系统研究了镍基催化剂表面积碳的形态和特点。热力学研究表明,在５７３ Ｋ到１２７３ Ｋ的温度范围内,催化剂的表面积碳是不可避免的。ＴＰＳＲ、ＸＰＳ和ＴＰＤ研究表明,甲烷在催化剂表面裂解将形成至少三种碳物种：Ｃα、Ｃβ和Ｃγ。这三种碳物种具有不同的表面迁移能力、热稳定性和反应活性。其中,Ｃα物种在甲烷干气重整反应中是一种非常活泼和重要的中间体;Ｃγ物种则可能是表面积碳的前驱物：部分脱氢的Ｃβ物种能够与Ｈ２或ＣＯ２反应生成ＣＨ４或ＣＯ。     

流化床甲烷/丙烷临氧CO2重整制合成气反应研究

研究了流化床反应器中甲烷、丙烷临氧自热CO2重整制合成气反应中不同催化剂的性能及表面积碳行为，并用热重分析、激光拉曼及透射电镜研究了催化剂表面的积碳物种及积碳量。结果表明，贵金属Pd、Pt由于对烷烃有较强的裂解作用，镍基及贵金属修饰的镍基催化剂表面有大量的纤维状炭生成；碱土和稀土金属改性的镍基催化剂有较好的抗积碳性能，大量碱土金属CaO修饰微球硅胶后负载的镍基催化剂在同等的反应条件下没有发现积碳，碱土金属对催化剂表面碱性的增强是催化剂抗积碳性能提高的原因。     

Effect of decomposition of catalyst precursor on Ni/CeO2 activity for CO methanation

CO methanation on Ni/CeO₂ has recently received increasing attention. However, the low-temperature activity and carbon resistance of Ni/CeO₂ still need to be improved. In this study, plasma decomposition of nickel nitrate was performed at ca. 150°C and atmospheric pressure. This was followed by hydrogen reduction at 500 °C in the absence of plasma, and a highly dispersed Ni/CeO₂ catalyst was obtained with improved CO adsorption and enhanced metal-support interaction. The plasma-decomposed catalyst showed significantly improved low-temperature activity with high methane selectivity (up to 100%) and enhanced carbon resistance for CO methanation. For example, at 250°C, the plasma-decomposed catalyst showed a CO conversion of 96.8% with high methane selectivity (almost 100%), whereas the CO conversion was only 14.7% for a thermally decomposed catalyst.     

甲烷干重整催化剂Ni/Al2O3表面积炭表征与分析

用蒸发法制备了Ni/Al2O3催化剂及浸渍法制备了Ni/α-Al2O3和Ni/γ-Al2O3催化剂, 并与商品天然气水蒸气重整催化剂Z118Y一起进行了甲烷干重整实验, 考察了各催化剂上表面积炭行为. 通过H2程序升温还原(H2-TPR)、BET(Brunauer-Emmett-Teller)比表面积分析、X射线衍射(XRD)、透射电镜(TEM)、热重-差式扫描量热(TG-DSC)、程序升温氢化(TPH)等表征手段对催化剂表面沉积炭的特性进行了表征. 结果表明, 各催化剂上至少存在三种形式的碳物种: 无定形碳、丝状碳及石墨碳. 由于载体性质不同, 各催化剂上沉积炭的种类及其含量有所差别. Z118Y、Ni/Al2O3及Ni/α-Al2O3催化剂上主要沉积丝状炭, 而Ni/γ-Al2O3催化剂上则主要是石墨碳. Ni/γ-Al2O3催化剂中金属Ni颗粒较小(小于15 nm)、粒径分布范围较窄、分散性较好, 能减少催化剂表面炭的沉积, 有效地抑制丝状碳的生长.     

氮化SBA-16负载镍基催化剂的制备及其对甲烷二氧化碳重整反应的催化性能

通过软模板法合成了SBA-16分子筛,采用高温氨气氮化的方法使有序介孔硅材料中的氧原子部分被氮原子取代,得到氮化的SBA-16载体(SBA-16-N)。采用满孔浸渍法制备了镍基催化剂,并将制得的Ni/SBA-16和Ni/SBA-16-N催化剂用于甲烷二氧化碳重整反应。通过透射电镜、氮气物理吸附、X射线衍射、X射线光电子能谱和二氧化碳程序升温脱附等手段研究了载体和催化剂的结构,并利用热重分析对反应之后回收催化剂进行了表征。结果表明,高温氮化后的分子筛中掺入了氮元素,增加了载体的碱性,改善了载体对反应气体的吸附活化能力,增强了载体与金属之间的相互作用,从而提高了催化剂的活性和抗积炭性能。     

Syngas production by combined carbon dioxide reforming and partial oxidation of methane over Ni/α-Al2O3 catalysts

Ni/α-Al2O3 catalysts were found to be active in the temperature range 600~900 ℃ for both CO2 reforming and partial oxidation of methane. The effects of Ni loading, reaction temperature and feed gas ratio for the combination of CO2 reforming and partial oxidation of CH4 over Ni/α-Al2O3 were investigated. Catalysts of xwt%Ni/α-Al2O3 (x = 2.5, 5, 8 and 12) were prepared by wet impregnating the calcined support with a solution of nickel nitrate. XRD patterns and activity tests have verified that the 5wt%Ni/α-Al2O3 was the most active catalyst, as compared with the other prepared catalyst samples. An increase of the Ni loading to more than 5 wt% led to a reduction in the Ni dispersion. In addition, by combining the endothermic carbon dioxide reforming reaction with the exothermic partial oxidation reaction, the loss of catalyst activity with time on stream was reduced with the amount of oxygen added to the feed.     

新型纳米介孔二氧化锆担载的镍基催化剂甲烷干气重整性能评价

采用固体反应．模板剂晶化法合成出纳米介孔二氧化锆，并以其为载体通过浸渍法制备了Ni基催化剂，考察了载体性质对催化剂活性和稳定性的影响．结果表明，以四方晶相纳米二氧化锆为载体的催化剂性能更佳，并对其影响因素进行了分析．     

Ni取代六铝酸镧催化剂LaNiAl_(11)O_(19)表面积炭研究

通过 TEM、XPS、TGA、TPR-CO2 技术 ,对在 Ni取代六铝酸镧催化剂 La Ni Al1 1 O1 9表面上的甲烷裂解积炭、甲烷二氧化碳重整积炭及二氧化碳的消炭行为进行了研究 ,以探索该催化剂表面积炭形貌、来源、积炭物种以及积炭活性 .结果表明 ,甲烷具有相当高的裂解积炭活性 ,裂解后生成炭化物 ( carbide炭 )和石墨炭两种不同活性的炭种 ;二氧化碳的解离活性则相对较低 ,但其消除催化剂表面积炭活性却相当高     

甲烷催化二氧化碳重整制合成气反应研究进展*

本文参阅了甲烷催化二氧化碳重整制合成气反应研究方面50 余篇文献, 概述了近年来在该研究中催化剂活性组分选择、载体效应、助剂的作用、催化剂积炭行为和重整反应机理等方面的研究进展。     

碳化镍钼催化剂的制备及其甲烷干气重整活性(英文)

Nickel molybdenum carbide catalysts were prepared and their activities in the CO2 reforming of methane at a low CO2/CH4 reactant ratio were investigated using a microreactor at atmospheric pressure and at 973 K.The effect of the catalyst preparation method and the Ni/Mo ratio on the increase in catalyst life and the promotion of catalytic activity were investigated using N2 adsorption,X-ray diffraction, temperature-programmed carburization,temperature-programmed reaction,and a reforming reaction.The 25Ni75Mo catalyst that was carburized at 813 K exhibited the highest hydrogen formation ability and gave the least carbon deposition.The incomplete carburization of the Mo oxide species in the catalyst that was carburized at a lower temperature gradually gave a more active carburized species.The NiMoOxCy in the catalyst was more active in hydrogen formation during the dry reforming of methane whileβ-Mo2C andη-Mo3C2 were less active.     

The Mechanistic Study of Methane Reforming with Carbon Dioxide on Ni/α-Al2O3

The reactions of oxidized and reduced 6 wt % NiO/-Al₂O₃ with H₂, CH₄, CO₂, O₂, and their mixtures are studied in flow and pulse regimes using a setup equipped with a differential scanning calorimeter DSC-111 and a system for chromatographic analysis. It is shown that treatment with hydrogen at 700° results in the partial reduction of NiO to Ni. Methane practically does not react with oxidized Ni/-Al₂O₃ but it does react actively with the reduced catalyst to form H₂ and surface carbon. The latter is capable of reacting with lattice oxygen of Ni/-Al₂O₃ (slowly) and with adsorbed oxygen (rapidly). Carbon dioxide also reacts with surface carbon to form CO (rapidly) and with metallic Ni to yield CO and NiO (slowly). Thus, the main route of methane reforming with carbon dioxide on Ni/-Al₂O₃ is the dissociative adsorption of CH₄ to form surface carbon and H₂ and the reaction of this carbon with CO₂ resulting in the formation of CO by the reverse Boudouard reaction. Side routes are the interaction of the products of methane chemisorption with catalyst oxygen and the dissociative adsorption of CO₂ on metallic nickel. A competitive reaction of surface carbon with adsorbed oxygen results in a decrease in the CO₂ conversion in methane reforming with carbon dioxide. Therefore, the presence of gaseous oxygen in the reacting mixture decelerates methane reforming (catalyst poisoning by oxygen).     

Carbon Deposits Formed on the Surface of Ru–Ni Catalysts During the Mixed Reforming of Methane Process

Monometallic nickel and bimetallic ruthenium–nickel catalysts supported onto aluminum oxide without additives and aluminum oxide modified with MgO and CaO were prepared by an impregnation method. The catalysts were tested in the process of the mixed reforming of methane, and their properties were characterized by thermogravimetry, scanning electron microscopy, and X-ray diffractometry. The total organic carbon content of the catalysts was also measured. The promoting effect of ruthenium and structural promoters on the catalytic activity of Ni/Al₂O₃ was confirmed. The Ru–Ni/MgO–Al₂O₃ catalyst exhibited the highest stability and activity; this fact can be explained by the increased adsorption of methane on the surface of ruthenium–nickel clusters.     

太阳能甲烷重整中催化活性吸收体的表面特性

以AISI316泡沫金属为基体为太阳能甲烷重整反应制备出系列Ru基和Ni基催化活性吸收体(Ru/Al2O3/AISI316,Ni/Al2O3(MgO)/AISI316),着重利用XRD、TPR、TPD和CO2脉冲吸脱附等技术对所制整体式催化剂的表面特性进行了表征和分析.结果表明:以AISI316泡沫金属为基体可增加活性组分与涂层载体Al2O3的相互作用以及活性物种的分散度.对于Ni基催化活性吸收体,在涂层载体中添加MgO助剂可显著地提高Ni/Al2O3/AISI316的催化活性;Al2O3涂层载体含量的增加可提高活性组分NiO的分散性.相对Ni/Al2O3/AISI316,Ru/Al2O3/AISI316催化活性吸收体对CO2的吸附和活化能力更强,因而具有相对更高的催化活性.     

KINETIC STUDIES ON METHANE REFORMING WITH CARBON DIOXIDE

IntroductionNlcthallcrcforlllillg\\tillf'OZproducest'O-richs}'lltllcslsgas\\hichisuscftllilltileProcessofFicllcr-Tropscllalldo\orcactioll.sllcllastiles}'lltllcscsofaceticacid-dilllctll\'Ictllcralldo.o-aloof,olslI'21111addition.acolllparisolloftheccollolll…