Study on forward stimulated Brillouin scattering in a backward pumped fiber Raman amplifier

Strong multi-order forward stimulated Brillouin scattering (SBS) has been observed in the backward pumped S-band distributed fiber Raman amplifier (FRA) with tunable narrow signal source (less than 100 MHz) when the pump power of FRA reached the SBS threshold. This does not obey the theory that only weak backward SBS lines exist according to the conservation of energy and momentum and the wave vector selected rule. This is because the sound waveguide characteristic weakens the wave vector rule, and the forward transmitted sound waveguide Brillouin scattering lines are generated and amplified in FRA.When the pump power is further increased, 11 orders of SBS lines and comb-like profile are observed. For the excited line, the frequency is 197.2296 THz and the power is 0 dBm. The even order SBS lines are stronger than odd order SBS lines, the power of the 2nd and 4th order SBS lines is 1.75 dBm, which is 16 dB higher than that of the 1st and 3rd order SBS lines. The odd order SBS lines are named BrillouinRayleigh scattering lines.     

分布式反向抽运光纤拉曼放大器的功率转换效率分析

为了对反向抽运光纤拉曼放大器的功率转换效率进行研究,由耦合方程出发,采用龙格库塔算法和打靶法相结合的数值模拟方法,详细分析所有物理因素对反向抽运光纤拉曼放大器功率转换效率的影响。结果表明:功率转换效率先随着光纤长度增加而增加,当增加到最大值时保持数值不变;功率转换效率随着初始信号光功率、光纤拉曼增益系数、信号光损耗系数增加而增加,随着光纤有效面积、抽运光损耗系数、抽运光与信号光的频率比增加而减小;功率转换效率和初始抽运光功率呈抛物线曲线关系。所得结论对反向抽运光纤拉曼放大器功率转换效率的进一步研究以及光纤拉曼放大器的其他相关研究有重要参考意义。     

Amplification effect on stimulated Brillouin scattering in the S-band forward G652 fiber Raman amplifier

The amplification effects on forward and backward stimulated Brillouin scattering (SBS) lines in the forward pumped S-band distributed G652 fiber Raman amplifier (FRA) have been studied. There is a pump threshold power of Stokes backward stimulated Brillouin scattering (B-SBS) line in the forward pumped G652 FRA, it is about 1 mW. The Stokes B-SBS lines are amplified by FRA and fiber Brillouin Brillouin gain. In experimental work, the saturation gain of the first order Stokes backward SBS line is about 58 dB and the saturation gain of 25-km G652 forward FRA is about 25 dB, so the gain of FBA is about 33 dB. The forward stimulated Brillouin scattering (F-SBS) is generated and amplified in S-band G652 FRA. The stimulated threshold powers of the forward first order Stokes SBS (SB1-), second order Stokes SBS (SB2-), and third order SBS (SB3-) in the forward pumped FRA are 2.3, 1.6, and 1.6 mW,respectively. In experimental work, the saturation gains of SB1-, SB2-, and SB3- are about 38, 62, and 60 dB, respectively. The saturation Raman gain of 25-km G652 forward FRA is about 8.8 dB, so the Brillouin gains of SB1-, SB2-, and SB3- are about 29.2, 53.2, and 51.2 dB, respectively. The forward and backward cascaded SBS lines have been observed.     

Dynamics of cascaded Brillouin-Rayleigh scattering in a distributed fiber Raman amplifier

We investigate the dynamics of a novel multiwavelength generator in which cascaded-stimulated Brillouin scattering and Rayleigh scattering are automatically balanced to given an evenly spaced (9.4-GHz), highly flattened (<3-dB) optical frequency comb over a 57.2-nm span. The extended effective length for the relevant nonlinear processes from the distributed Raman gain and the reduced Brillouin threshold from the seeding effect of Rayleigh backscattered waves are considered to be the key factors that explain the operation of this structure.     

Stimulated Brillouin scattering effect on gain saturation of distributed fiber Raman amplifiers

<正>Gain saturation is a significant phenomenon of fiber Raman amplifiers(FRAs).Gain figures versus signal power are well explained.For the small signal,the coupled ordinary differential equations are used,and for the large signal,the Raman gain coefficient is modified.It is shown that the saturation power of FRAs decreases with the pump power,and gain saturation is easier to occur in the forward pump scheme than in the backward pump scheme.These phenomena are well explained by the stimulated Brillouin scattering (SBS) effect.This research provides a guide to the fabrication of practical FRAs.     

掺镱双包层光纤放大器分布泵浦方式下的优化算法

利用平均反转率迭代算法计算掺镱双包层光纤放大器分布泵浦方式下的稳态速率方程组,并采用遗传算法对分布泵浦功率的大小和每段光纤长度同时进行优化。评估函数中引入了每段光纤中最高温度的标准方差,以确保每段光纤中的最高工作温度是相同的。通过优化,7段泵浦的最高温度和标准方差分别为126.34 ℃和1.95 ℃ ,8段泵浦条件下的最高温度和标准方差分别为119.76 ℃和2.12 ℃。而未经优化的7段泵浦的最高温度和标准方差分别为147.12 ℃和21.37 ℃,8段泵浦条件下的最高温度和标准方差分别为139.95 ℃和20.83 ℃。计算结果表明：泵浦方式的优化降低了最高温度和标准方差,实现了光纤中温度分布的均匀性,并且通过增加泵浦段数可以进一步降低最高温度和平坦温度分布。     

掺镱双包层光纤放大器分布泵浦方式下的优化算法

 利用平均反转率迭代算法计算掺镱双包层光纤放大器分布泵浦方式下的稳态速率方程组,并采用遗传算法对分布泵浦功率的大小和每段光纤长度同时进行优化。评估函数中引入了每段光纤中最高温度的标准方差,以确保每段光纤中的最高工作温度是相同的。通过优化,7段泵浦的最高温度和标准方差分别为126.34 ℃和1.95 ℃ ,8段泵浦条件下的最高温度和标准方差分别为119.76 ℃和2.12 ℃。而未经优化的7段泵浦的最高温度和标准方差分别为147.12 ℃和21.37 ℃,8段泵浦条件下的最高温度和标准方差分别为139.95 ℃和20.83 ℃。计算结果表明：泵浦方式的优化降低了最高温度和标准方差,实现了光纤中温度分布的均匀性,并且通过增加泵浦段数可以进一步降低最高温度和平坦温度分布。     

超强激光在均匀等离子体中的背向拉曼散射放大机制

使用等离子体背向受激拉曼散射对激光进行放大时,等离子体的密度、温度和长度都会对激光的放大效果产生影响.为了探究等离子体密度对结果的影响,本文使用一维粒子模拟程序模拟了波长为800 nm的泵浦激光入射到均匀等离子体中,等离子体密度和泵浦光光强对散射光光谱的影响.模拟结果表明,等离子体密度降低会导致散射光的波长变短,而泵浦光的光强在一定范围内降低会增加散射光中背向散射光的比例.通过分析散射光的光强和等离子体的密度,发现前向拉曼散射是等离子体密度变化的原因.模拟结果对等离子体背向受激拉曼散射放大的实验研究具有重要的指导意义.     

Effect of stimulated Brillouin scattering on the gain saturation of distributed fiber Raman amplifier and its suppression by phase modulation

For distributed fiber Raman amplifiers(DFRAs), stimulated Brillouin scattering(SBS) can deplete the pump once occurring and consequently generate gain saturation. On the basis of such a theory, theoretical gain saturation powers in DFRAs with various pump schemes are obtained by calculating SBS thresholds in them, and the experimental results show that they are in excellent agreement with the calculation results. The saturation power of the DFRA with a 300 m W forward pump is as low as 0 d Bm, which needs to be enhanced by phase modulation, and the effect is quantitatively studied. A simple model taking both modulation frequency and index into consideration is presented by introducing a correction factor to evaluate the effect of phase modulation on the enhancement of saturation power. Experimentally, it is shown that such a correction factor decreases as the modulation frequency increases and approaches zero when the modulation frequency becomes high enough. In particular, a phase modulation with a modulation frequency of 100 MHz and a modulation index of 1.380 can enhance the saturation power by 4.44 d B, and the correction factor is 0.25 d B, in which the modulation frequency is high enough. Additionally, the factor is 1.767 d B for the modulation frequency of 25 MHz. On this basis,phase modulations with various indexes and a fixed frequency of 25 MHz are adopted to verify the modified model, and the results are positive. To obtain the highest gain saturation power, the model is referable. The research results provide a guide for the design of practical DFRAs.     

A self-gain random distributed feedback fiber laser based on stimulated Rayleigh scattering

We reported a narrow linewidth (~ 4 kHz) fiber laser with a mirror-less open cavity based on stimulated Rayleigh scattering (STRS) in a non-uniform fiber. Because of its variable core size and dispersion along the fiber, the threshold of the stimulated Brillouin scattering was increased by ~ 7 dB compared with that of conventional single mode fiber, which allows higher order Rayleigh scattering. The self-gain is initiated by the spontaneous Rayleigh scattering and amplified via STRS, and the distributed feedback mechanism is formed by different orders of Rayleigh scattering counter-propagating as the “random mirror reflection” in the non-uniform fiber.     

Theoretical study of stimulated Raman scattering in long tapered fiber amplifier

A model that is based on the propagation equation and coupled mode theory is introduced in order to describe stimulated Raman scattering(SRS) effects in long tapered fiber amplifiers.Based on the presented model,fiber amplifiers with uniform and long tapered fibers are theoretically and numerically simulated.It can be drawn from the results of our simulations that the long tapered fiber has the advantage in suppressing SRS when applied in fiber laser amplifiers.Our results can provide guidance in the designing of system configuration in long tapered-fiber-based fiber laser systems.     

Experimental study on tandem pumped fiber amplifier

We present the experimental results of a 1083 nm fiber amplifier tandem pumped by 1030 nm fiber laser. The output characteristics of the tandem pumped amplifier with cladding-pump and core-pump schemes are both investigated. The 1083 nm signal laser has not been efficiently amplified when cladding-pumped by 1030 nm laser for the weak absorption of the gain fiber. The core-pump scheme works well with the amplifier. The output properties with different gain fiber length are experimentally investigated. The maximum output power is 2.4 W with power conversion efficiency of 60%.     

Low threshold Raman effect in high power narrowband fiber amplifier

A low-threshold Raman effect in a kilowatt ytterbium-doped narrowband fiber amplifier system is reported. The Raman Stokes light at 1120 nm is achieved with the total output power of only ~400 W, indicating that the Raman threshold of this kilowatt codirectional pumped continuous wave fiber amplifier is much lower than the predicted value estimated by the classic formula. To figure out the mechanism of this phenomenon, simulations based on the general stimulated Raman scattering(SRS) model are analyzed indicating that the key factor is the coupling between four-wave mixing(FWM) and SRS. The simulation results are in good agreement with our experiments.     

基于高非线性光纤的增益谱平坦拉曼光纤放大器研究

针对光纤通信中密集波分复用系统各信道的在线平坦光放大这一光通信问题,提出利用级联高非线性光纤来设计增益平坦的拉曼光纤放大器。对高非线性光纤(As S光纤)拉曼增益谱前后沿进行线性拟合处理,利用不同波长泵浦抽运同种光纤,实现前放大后增益补偿,并考虑信号光损耗不同,在输出端得到了一个近似固定的功率输出值,并分析了影响拉曼光纤放大器输出特性的因素。模拟结果表明:平均增益为20.45 dB,增益平坦度为0.15 dB。     

Threshold features of a Brillouin Stokes comb generated in a distributed fiber Raman amplifier

We study threshold features of a Brillouin-shifted Stokes comb generated in a distributed fiber Raman amplifier. When the input power of Brillouin pump is linearly increased in high Raman gain, the first Stokes wave grows exponentially at much lower threshold power and then experiences an appreciable power decrease in the vicinity of the Brillouin comb's threshold. This power reduction of the first Brillouin Stokes, which we did not see mentioned in previous reports, was caused by a power transfer to higher-order lines and initiated Brillouin comb generation. Moreover, the effects of Raman pump power and pumping direction on the threshold of a Brillouin comb are investigated.     

单频光纤拉曼放大器的实验研究

本文进行了1031 nm抽运光对1080 nm单频信号光的拉曼放大实验,详细研究了单频信号光种子功率、拉曼增益光纤长度、抽运方式等因素对 单频光纤拉曼放大器(SF-FRA)输出特性的影响.结果表明,在未受受激布里渊散射(SBS)因素限制时,相同抽运功率条件下,单频信号光种子功率越高,SF-FRA的效率越高;拉曼增益光纤越长,SF-FRA的效率越高;前向抽运时,SF-FRA的效率较高.实验中发现SF-FRA的拉曼放大过程对单频信号光的线宽有较小的展宽.此外,单频信号光远场干涉短曝光图像的对比度为0.814,单频信号光与SF-FRA放大光远场干涉短曝光图像可见度为0.719,表明SF-FRA对单频信号光的相干性有一定影响.实验结论可为其他特殊波长SF-FRA的设计提供一定的参考.     

电子束泵浦KrF激光器进行超短脉冲的单束放大实验研究

电子束泵浦KrF激光器口径大、泵浦率高 ,可直接用于进行超短脉冲激光的放大。用天光一号电子束泵浦KrF激光器进行超短脉冲激光放大 ,将超短脉冲激光放大到 2～ 3J、1.2 ps,激光功率达到 2TW。测量了石英窗镜中的非线性吸收系数和超短脉冲激光脉宽的变化     

强泵浦条件下光纤放大器相位噪声的测量

利用多抖动法对强泵浦条件下光纤放大器引入的相位噪声进行了测量。利用功率谱、积分谱对具体泵浦条件下的相位噪声特性进行定性分析,结果表明,泵浦功率越大,高频成分占的比例越大。利用结构函数定量分析相位噪声的变化特性,得出相位噪声控制系统的带宽需求指标。实验测得在71,181和230 W泵浦条件下,所需相位控制系统带宽最小值分别为830 Hz,3.1 kHz和10 kHz。     

在同种光纤中实现RFA增益平坦化的方法

提出了一种新的光纤拉曼放大器设计方法:在同一种光纤内运用不同波长的泵浦光源达到前增益后补偿的目的,最终实现在放大器输出端信号光增益谱平坦化。通过对拉曼增益谱前后沿做线性化处理,化简稳态SRS耦合波方程的解析解,最终在输出端得到了一个固定的功率输出值。模拟结果表明:所设计的放大器具有增益平坦度好、增益高的优点,且设计方法简单。该方案为增益平坦化的拉曼光纤放大器设计提供了一种新的思路。