求解辐射传递方程的离散坐标法

阐述了含吸收散射性介质三维空腔内辐射传递方程的离散坐标解法。讨论了入射散射项积分格式的选取,以及假散射和射线效应对解精度的影响。对三维矩形炉膛内辐射传递过程进行了数值模拟,并与区域法和离散传递法进行比较。比较结果表明离散坐标法具有较好的精度,是目前燃烧室内辐射传热过程数值模拟的一种较好的方法。     

Complete matrix solution of radiative transfer equation for PILE of horizontally homogeneous slabs

This article covers the analytical solution of the discretized radiative transfer equation in the matrix form. The equation is discretized according to the discrete ordinates method. The solution is based on the representation of the light field in a scattering medium as a superposition of an anisotropic and a smooth regular parts. The first of them is calculated analytically using the smoothness of the solution angular spectrum. The regular part is obtained from a radiative transfer equation boundary problem with the anisotropic part as a source function by discrete ordinates method with a scaling transformation and a matrix-operator method applied. There is no limitation of the scattering law in a medium.     

Verification of numerical simulation method for entropy generation of radiation heat transfer in semitransparent medium

The numerical simulation method of radiative entropy generation in participating media presented by Caldas and Semiao [Entropy generation through radiative transfer in participating media: analysis and numerical computation. JQSRT 2005;96:423-37] is extended to analyze the radiative entropy generation in the enclosures filled with semitransparent media. A discrete ordinates method is used to solve radiative transfer equation and radiative entropy generation. Two different examples are employed to verify the numerical simulation method of radiative entropy generation in the enclosure. Numerical results of dimensionless radiative entropy generation of enclosure are identical to that of entire thermodynamics analysis for the enclosure system. This numerical simulation method can be used in the entropy generation analysis of high-temperature systems such as boilers and furnaces, in which radiation is the dominant mode of heat transfer.     

蒙特卡罗方法对各向异性介质辐射特性的模拟

本文提出一种计算含微粒半透明介质辐射特性的蒙特卡罗方法，考虑了微粒群的独立多次散射，直接用米氏相函数考虑微粒的各向异性性质，计算了含微粒层的双向反射率与双向透射率。与实验数据和离散座标法的计算结果比较，吻合良好。     

Discrete ordinates solution of coupled conductive radiative heat transfer in a two-layer slab with Fresnel interfaces subject to diffuse and obliquely collimated irradiation

The coupled conductive radiative heat transfer in a two-layer slab with Fresnel interfaces subject to diffuse and obliquely collimated irradiation is solved. The collimated and diffuse components problems are treated separately. The solution for diffuse radiation is obtained by using a composite discrete ordinates method and includes the development of adaptive directional quadratures to overcome the difficulties usually encountered at the interfaces. The complete radiation numerical model is validated against the predictions obtained by using the Monte Carlo method.     

Approximate analytical solution to normal emittance of semi-transparent layer of an absorbing, scattering, and refracting medium

A two-step approximate analytical solution for the normal emittance of a plane layer of an absorbing, scattering and refracting medium is derived analytically. The analysis is based on the transport approximation and the two-step solution method for radiative transfer. The high accuracy of the approximate solution, examined by comparing its results to those obtained independently by the discrete ordinates and Monte Carlo methods, makes it suitable for application in combined experimental-analytical studies to identify selected spectral radiative properties of dispersed media in the range of semi-transparency.     

Microwave radiative transfer intercomparison study for 3-D dichroic media

Three different numerical methods capable of solving the radiative transfer of microwave radiation within 3-D dichroic media are compared. A case study, represented by an intense rain shaft populated by perfectly oriented oblate raindrops, is analysed in detail, including a discussion of the behaviour of all four Stokes components.Results demonstrate an acceptable agreement between all Monte Carlo methods. The method based on a discrete ordinates scheme agrees only qualitatively with the Monte Carlo outputs. Because of its lower computational cost the backward Monte Carlo technique based on importance sampling represents the most efficient way to face passive microwave radiative transfer problems related to optically thick 3-D structured clouds including non-spherical preferentially oriented hydrometeors.     

Evaluation of solution methods for radiative heat transfer in gaseous oxy-fuel combustion environments

The exact solution to radiative heat transfer in combusting flows is not possible analytically due to the complex nature of the integro-differential radiative transfer equation (RTE). Many different approximate solution methods for the solution of the RTE in multi-dimensional problems are available. In this paper, two of the principal methods, the spherical harmonics (P₁) and the discrete ordinates method (DOM) are used to calculate radiation. The radiative properties of the gases are calculated using a non-gray gas full spectrum k-distribution method and a gray method. Analysis of the effects of numerical quadrature in the DOM and its effect on computation time is performed. Results of different radiative property methods are compared with benchmark statistical narrow band (SNB) data for both cases that simulate air combustion and oxy-fuel combustion. For both cases, results of the non-gray full spectrum k-distribution method are in good agreement with the SNB data. In the case of oxy-fuel simulations with high partial pressures of carbon dioxide, use of gray method for the radiative properties may cause errors and should be avoided.     

MOL solution of DOM for transient radiative transfer in 3-D scattering media

A methodology based on the method of lines solution of discrete ordinates method for solution of the 3-D transient radiative transfer equation is introduced. The method is applied to the prediction of transient and steady state transmittances in a cubical enclosure containing purely scattering medium and validated against Monte Carlo solutions from the literature. The flexibility of the method for implementation of linear spatial differencing schemes, flux limiters and weighted essentially non-oscillatory methods is demonstrated. Van Leer flux limiter is found to provide stable, accurate and efficient solutions.     

Finite element formulation of the first- and second-order discrete ordinates equations for radiative heat transfer calculation in three-dimensional participating media

Two finite element methods (FEMs), FEDOM1 and FEDOM2 (standing for the first and the second finite element discrete ordinates methods, respectively), are formulated and numerically tested. The reference second-order discrete equation is modified in its scattering terms and is applied to the problems of absorbing/emitting and anisotropically scattering media by using the FEM. Numerical features of the developed FEMs are compared with one of the discrete ordinates interpolation method (DOIM), which uses a finite difference scheme. Prediction results of radiative heat transfer by these two FEMs are compared with reference solutions and verified in three-dimensional enclosures containing participating media. The results of FEDOM1 and FEDOM2 agree well with exact solutions for the problem of absorbing/emitting medium with various range of optical thickness. Generally, the two FEMs show more accurate results than DOIM. And FEDOM1 shows more accurate results than FEDOM2 in most of the test problems. Both of the developed FEMs show reasonable results compared with published Monte Carlo solutions for the tested absorbing/emitting and anisotropically scattering media. Although the FEDOM2 is not as accurate as the FEDOM1, it shows its own advantages that it reduces CPU time and memory space of dependent variable to half.     

Monte Carlo discrete curved ray-tracing method for radiative transfer in an absorbing-emitting semitransparent slab with variable spatial refractive index

A Monte Carlo discrete curved ray-tracing method is developed to analyze the radiative transfer in one-dimensional absorbing-emitting semitransparent slab with variable spatial refractive index, in which the Monte Carlo method is combined with the discrete curved ray-tracing method. A problem of radiative equilibrium with linear variable spatial refractive index is taken as an example to examine the accuracy of the proposed method. The temperature distributions and the dimensionless radiative heat flux are determined by the proposed method and compared with the data in references, which are obtained by other different methods. The results show that the Monte Carlo discrete curved ray-tracing method has a good accuracy in solving the radiative transfer in one-dimensional semitransparent slab with variable spatial refractive index.     

Layer-edge conditions for multislab atmospheric radiative transfer problems

We derive nonstandard layer-edge conditions for efficient solution of multislab atmospheric radiative transfer problems. We begin by defining a local radiative transfer problem on the lowermost layer of a multislab model atmosphere and we consider a standard discrete ordinates version of this local problem. We then make use of a recently developed computational method in order to derive layer-edge conditions involving incident, reflected and transmitted radiation. These layer-edge conditions for the lowermost layer are given in terms of inherent optical properties of the layer, the solar zenith angle and the quadrature set used in the discrete ordinates approach. They can be used to increase the efficiency of our computational method in solving practical problems in atmospheric radiative transfer. Moreover, they are amenable to incorporation into other discrete ordinates methods. To illustrate, we report numerical results for two atmospheric model problems.     

Assessment of the re-ordered wide band model for non-grey radiative transfer calculations in 3D enclosures

The objective of the present study is to evaluate variations of the re-ordered wide band model for non-grey radiative transfer calculations in 3D enclosures using the discrete ordinates method. First, the performance of various angular and spatial discretisation schemes of the discrete ordinates method is investigated. Then, several formulations, averaging procedures, and scaling methods of the re-ordered wide band model are tested, and the results are validated against those of a statistical narrow band model. The grey gases formulation using three optimised absorption coefficient is found to be the most efficient method.     

Linearization of the interaction principle: Analytic Jacobians in the “Radiant” model

In this paper we present a new linearization of the Radiant radiative transfer model. Radiant uses discrete ordinates for solving the radiative transfer equation in a multiply-scattering anisotropic medium with solar and thermal sources, but employs the adding method (interaction principle) for the stacking of reflection and transmission matrices in a multilayer atmosphere. For the linearization, we show that the entire radiation field is analytically differentiable with respect to any surface or atmospheric parameter for which we require Jacobians (derivatives of the radiance field). Derivatives of the discrete ordinate solutions are based on existing methods developed for the LIDORT radiative transfer models. Linearization of the interaction principle is completely new and constitutes the major theme of the paper. We discuss the application of the Radiant model and its linearization in the Level 2 algorithm for the retrieval of columns of carbon dioxide as the main target of the Orbiting Carbon Observatory (OCO) mission.     

The method of lines solution of discrete ordinates method for radiative heat transfer in cylindrical enclosures

A radiation code based on method of lines solution of discrete ordinates method for radiative heat transfer in axisymmetric cylindrical enclosures containing absorbing-emitting medium was developed and tested for predictive accuracy by applying it to (i) test problems with black and grey walls (ii) a gas turbine combustor simulator enclosing a non-homogeneous absorbing-emitting medium and benchmarking its steady-state predictions against exact solutions and measurements. Comparisons show that it provides accurate solutions for radiative heat fluxes and can be used with confidence in conjunction with CFD codes based on the same approach.     

Numerical simulation of radiative heat transfer from non-gray gases in three-dimensional enclosures

The discrete ordinates and the discrete transfer methods are applied to the numerical simulation of radiative heat transfer from non-gray gases in three-dimensional enclosures. Several gas radiative property models are used, namely the correlated k-distribution (CK), the spectral line-based weighted-sum-of-gray-gases (SLW) and the weighted-sum-of-gray-gases (WSGG) methods. The results are compared with recently published accurate calculations based on the statistical narrow band model. The WSGG model is computationally efficient, but often yields relatively large errors. It should be used only if moderate accuracy is sufficient. The SLW model is the best alternative regarding the compromise between accuracy and numerical efficiency. However, an optimization of the coefficients of the model is essential to reduce the computational requirements, especially in the case of gas mixtures. The CK model is the most accurate of the methods evaluated here, but too time consuming for engineering applications, although recent developments may partly overcome this shortcoming.     

On the finite volume method and the discrete ordinates method regarding radiative heat transfer in acute forward anisotropic scattering media

The ability of the finite volume method (FVM) and the discrete ordinates method (DOM) to model radiative heat transfer in acute forward anisotropic scattering media has been investigated. The test case involves a purely scattering medium in a cubic enclosure, irradiated by one boundary with diffuse emission. Four phase functions have been considered: three of the Henyey-Greenstein type with respective asymmetry factors of 0.2, 0.8 and 0.93, and a Mie phase function with a strong forward scattering peak (computed for a size parameter of 245 and corresponding to an asymmetry factor of 0.93). Results obtained with the FVM are in good agreement with Monte Carlo reference solutions, whatever the level of acute anisotropic scattering (for asymmetry factors up to 0.93). The DOM combined with the renormalization procedures of the phase function proposed by Kim and Lee (Effect of anisotropic scattering on radiative heat transfer in two-dimensional rectangular enclosures. Int J Heat Mass Transfer 1988;31:1711-21. [1]) and Wiscombe (On initialization error and flux conservation in the doubling method. JQSRT 1976;18:637-58. [2]) provides accurate results only for the smallest asymmetry factor. As the asymmetry factor increases, the renormalization procedures induce strong modifications in the values of the discretized phase function resulting in an underestimation of the effective attenuation by scattering. This error has been found to increase with optical thickness. In fact, when using the DOM, results would be more accurate combining this method with a Delta-Eddington approximation of the phase function, instead of using the actual phase function which is altered too much by renormalization.     

On the use of a meshless method for solving radiative transfer with the discrete ordinates formulations

A meshless method is presented for solving the radiative transfer equation in the discrete ordinates approach. It is shown that the primitive variables formulation is unstable for low values of the absorption coefficient while the even parity formulation is always stable and accurate.     

蒙特卡罗粒子输运问题的全局降方差方法

精确获得中子通量的时间-空间-能量精细分布对于一类非定常粒子输运蒙特卡罗模拟至关重要.以零方差理论为基础,采取化整为零的策略,把蒙特卡罗方法与离散纵标方法相耦合,用近似重要函数指导蒙特卡罗模拟,给出一种实现蒙特卡罗全局降方差的计算方案.数值算例表明,该计算方案获得了全局降方差的效果.     

蒙特卡罗与离散纵标耦合方法在压水堆堆腔漏束计算中的应用

为克服蒙特卡罗(MC)方法计算时间长和离散纵标(SN)方法复杂几何描述不精确的困难,采用SN-MC耦合计算流程,研究了基于蒙特卡罗方法和离散纵标方法的耦合方法。耦合方法的主要思想是根据离散纵标程序提供的中子角通量,利用接口程序计算出面源的分布概率,然后由修改后的源抽样子程序生成包括上下圆面源和圆柱面源的组合源,提供给蒙特卡罗程序进行计算分析。初步计算结果表明,该耦合方法是正确的,可用于压水堆堆腔漏束的计算分析。