Green and efficient extraction strategy to lithium isotope separation with double ionic liquids as the medium and ionic associated agent

The paper reported a green and efficient extraction strategy to lithium isotope separation. A 4-methyl-10-hydroxybenzoquinoline (ROH), hydrophobic ionic liquid—1,3-di(isooctyl)imidazolium hexafluorophosphate ([D(i-C₈)IM][PF₆]), and hydrophilic ionic liquid—1-butyl-3-methylimidazolium chloride (ILCl) were used as the chelating agent, extraction medium and ionic associated agent. Lithium ion (Li⁺) first reacted with ROH in strong alkali solution to produce a lithium complex anion. It then associated with IL⁺ to form the Li(RO)₂IL complex, which was rapidly extracted into the organic phase. Factors for effect on the lithium isotope separation were examined. To obtain high extraction efficiency, a saturated ROH in the [D(i-C₈)IM][PF₆] (0.3 mol l^?1), mixed aqueous solution containing 0.3 mol l^?1 lithium chloride, 1.6 mol l^?1 sodium hydroxide and 0.8 mol l^?1 ILCl and 3:1 were selected as the organic phase, aqueous phase and phase ratio (o/a). Under optimized conditions, the single-stage extraction efficiency was found to be 52 %. The saturated lithium concentration in the organic phase was up to 0.15 mol l^?1. The free energy change (ΔG), enthalpy change (ΔH) and entropy change (ΔS) of the extraction process were ?0.097 J mol^?1, ?14.70 J mol K^?1 and ?48.17 J mol^?1 K^?1, indicating a exothermic process. The partition coefficients of lithium will enhance with decrease of the temperature. Thus, a 25 °C of operating temperature was employed for total lithium isotope separation process. Lithium in Li(RO)₂IL was stripped by the sodium chloride of 5 mol l^?1 with a phase ratio (o/a) of 4. The lithium isotope exchange reaction in the interface between organic phase and aqueous phase reached the equilibrium within 1 min. The single-stage isotope separation factor of ⁷Li–⁶Li was up to 1.023 ± 0.002, indicating that ⁷Li was concentrated in organic phase and ⁶Li was concentrated in aqueous phase. All chemical reagents used can be well recycled. The extraction strategy offers green nature, low product cost, high efficiency and good application prospect to lithium isotope separation.     

Two dimensional inorganic electride-promoted electron transfer efficiency in transfer hydrogenation of alkynes and alkenes

A simple and highly efficient transfer hydrogenation of alkynes and alkenes by using a two-dimensional electride, dicalcium nitride ([Ca₂N]⁺·e^–), as an electron transfer agent is disclosed. Excellent yields in the transformation are attributed to the remarkable electron transfer efficiency in the electride-mediated reactions. It is clarified that an effective discharge of electrons from the [Ca₂N]⁺·e^– electride in alcoholic solvents is achieved by the decomposition of the electride via alcoholysis and the generation of ammonia and Ca(OⁱPr)₂. We found that the choice of solvent was crucial for enhancing the electron transfer efficiency, and a maximum efficiency of 80% was achieved by using a DMF mixed isopropanol co-solvent system. This is the highest value reported to date among single electron transfer agents in the reduction of C–C multiple bonds. The observed reactivity and efficiency establish that electrides with a high density of anionic electrons can readily participate in the reduction of organic functional groups.     

Efficient Red Electroluminescent Devices with Sterically Hindered Phosphorescent Platinum(II) Schiff Base Complexes and Iridium Complex Codopant

Sterically hindered platinum(II) Schiff base complexes were prepared. Complex 4 , which displays red emission with a quantum yield of 0.29 in a thin film and a self‐quenching rate constant of 1×10^?7 dm³ mol^?1 s^?1, was used to fabricate organic light‐emitting diodes with single or double emissive layers (EMLs). An iridium(III) complex with a wide band gap was codoped into the electron‐dominant EML to act as a deep electron trapper, and red‐light‐emitting devices with the highest current, power, and external quantum efficiencies of 20.43 cd A^?1 18.33 Lm W^?1, and 11.7 %, respectively, were fabricated. A high current efficiency and EQE of up to 14.69 cd A^?1 and 8.3 %, respectively, were achieved at a high brightness of 1000 cd m^?2. The significant delay of efficiency roll‐off is attributed to the bulky 3D structure of the norbornene moiety at the periphery of the Schiff base ligand of 4 and to the new device design strategy. The fabricated device had a projected lifetime (LT50) of 18 000 h.     

Application of the Organic Photosensitizers Bearing Two Carboxylic Acid Groups to Dye‐Sensitized Solar Cells

Three electron donor‐?? bridge‐electron acceptor (D‐π‐A) organic dyes bearing two carboxylic acid groups were applied to dye‐sensitized solar cells (DSSC) as sensitizers, in which one triphenylamine or modified triphenylamine and two rhodanine‐3‐acetic acid fragments act as D and A, respectively. It was found that the introduction of t‐butyl or methoxy group in the triphenylamine subunit could lead to more efficient photoinduced intramolecular charge transfer, thus improving the overall photoelectric conversion efficiency of the resultant DSSC. Under global AM 1.5 solar irradiation (73 mW·cm^?2), the dye molecule based on methoxy‐substituted triphenylamine achieved the best photovoltaic performance: a short circuit photocurrent density (J_sc) of 12.63 mA·cm^?2, an open circuit voltage (V_oc) of 0.55 V, a fill factor (FF) of 0.62, corresponding to an overall efficiency (η) of 5.9%.     

Coplanar indenofluorene-based organic dyes for dye-sensitized solar cells

A series of new organic dyes, comprising indenofluorene moiety as a conjugated bridge, with an extended π-groups, such as thiophene and furan, diphenylamine as donor, cyanoacrylic acid group as an electron acceptor and anchoring group, have been synthesized. Photophysical and electrochemical measurements, and theoretical computation were carried out on these dyes. Dye-sensitized solar cells (DSSCs) using these dyes as the sensitizers exhibited photocurrent density (J_SC), open-circuit voltage (V_OC), and fill factor (FF) in the range of 6.95–8.20 mA/cm², 0.70–0.71 V, and 0.69–0.71, respectively, corresponding to an overall conversion efficiency of 3.36–4.05%. The best efficiency reached 56% of the standard cell based on N719.     

A two-dimensional Be2Au monolayer with planar hexacoordinate s-block metal atoms: a superconducting global minimum Dirac material with two perfect Dirac node-loops

Using a starlike Be₆Au₇⁻ cluster as a building block and following the bottom-up strategy, an intriguing two-dimensional (2D) binary s-block metal Be₂Au monolayer with a P6/mmm space group was theoretically designed. Both the Be₆Au₇⁻ cluster and the 2D monolayer are global minima featuring rule-breaking planar hexacoordinate motifs (anti-van''t Hoff/Le Bel arrangement), and their high stabilities are attributed to good electron delocalization and electronic-stabilization-induced steric force. Strikingly, the Be₂Au monolayer is a rare Dirac material with two perfect Dirac node-loops in the band structure and is a phonon-mediated superconductor with a critical temperature of 4.0 K. The critical temperature can be enhanced up to 11.0 K by applying compressive strain at only 1.6%. This study not only identifies a new binary s-block metal 2D material, namely Be₂Au, which features planar hexacoordination, and a candidate superconducting material for further explorations, but also provides a new strategy to construct 2D materials with novel chemical bonding.

A topological superconductor, named Be₂Au monolayer, containing planar hexacoordinate s-block metal (Be and Au) atoms was theoretically designed by rationally assembling related clusters.     

A green protocol for efficient discovery of novel natural compounds: Characterization of new ginsenosides from the stems and leaves of Panax ginseng as a case study

Exploration of new natural compounds is of vital significance for drug discovery and development. The conventional approaches by systematic phytochemical isolation are low-efficiency and consume masses of organic solvent. This study presents an integrated strategy that combines offline comprehensive two-dimensional liquid chromatography, hybrid linear ion-trap/Orbitrap mass spectrometry, and NMR analysis (2D LC/LTQ-Orbitrap-MS/NMR), aimed to establish a green protocol for the efficient discovery of new natural molecules. A comprehensive chemical analysis of the total ginsenosides of stems and leaves of Panax ginseng (SLP), a cardiovascular disease medicine, was performed following this strategy. An offline 2D LC system was constructed with an orthogonality of 0.79 and a practical peak capacity of 11,000. The much greener UHPLC separation and LTQ-Orbitrap-MS detection by data-dependent high-energy C-trap dissociation (HCD)/dynamic exclusion were employed for separation and characterization of ginsenosides from thirteen fractionated SLP samples. Consequently, a total of 646 ginsenosides were characterized, and 427 have not been isolated from the genus of Panax L. The ginsenosides identified from SLP exhibited distinct sapogenin diversity and molecular isomerism. NMR analysis was finally employed to verify and offer complementary structural information to MS-oriented characterization. The established 2D LC/LTQ-Orbitrap-MS/NMR approach outperforms the conventional approaches in respect of significantly improved efficiency, much less use of drug materials and organic solvent. The integrated strategy enables a deep investigation on the therapeutic basis of an herbal medicine, and facilitates new compounds discovery in an efficient and environmentally friendly manner as well.     

Optimal gradient operation in comprehensive liquid chromatography × liquid chromatography systems with limited orthogonality

A novel strategy is described for designing optimal second dimension (²D) gradient conditions for a comprehensive two-dimensional liquid chromatography system where the two dimensions are not fully orthogonal. Using the approach developed here, the initial and final organic modifier content values resulting in the highest coverage of separation space can be derived for each ²D gradient run. Theory indicates that these values can be determined by adapting ²D gradient operation to the degree of orthogonality. The new method is tested on a comprehensive two-dimensional liquid chromatography system that uses reversed phase (RP) columns showing different selectivities in the two dimensions. A comparison between analyses carried out using normal and optimized ²D gradients showed that the latter allow a more efficient use of analysis time. This can result either in an improved peak capacity or in decreasing total analysis time, depending on the final goal of the experiment. In the latter scenario, the number of separated peaks is comparable to that obtained using gradients spanning a wide range of organic modifier but, now, in half the time. As test samples complex mixtures of peptides were analyzed.     

Dual Photosensitizer Coupled Three-Dimensional Metal-Covalent Organic Frameworks for Efficient Photocatalytic Reactions

In this work, we innovatively assembled two types of traditional photosensitizers, that is pyridine ruthenium/ferrum (Ru(bpy)₃²⁺/Fe(bpy)₃²⁺) and porphyrin/metalloporphyrin complex (2HPor/ZnPor) by covalent linkage to get a series of dual photosensitizer-based three-dimensional metal-covalent organic frameworks (3D MCOFs), which behaved strong visible light-absorbing ability, efficient electron transfer and suitable band gap for highly efficient photocatalytic hydrogen (H₂) evolution. Rubpy-ZnPor COF achieved the highest H₂ yield (30 338 μmol g⁻¹ h⁻¹) with apparent quantum efficiency (AQE) of 9.68 %@420 nm, which showed one of the best performances among all reported COF based photocatalysts. Furthermore, the in situ produced H₂ was successfully tandem used in the alkyne hydrogenation with ≈99.9 % conversion efficiency. Theoretical calculations reveal that both the two photosensitizer units in MCOFs can be photoexcited and thus contribute optimal photocatalytic activity. This work develops a general strategy and shows the great potential of using multiple photosensitive materials in the field of photocatalysis.     

Enhancement of Visible-Light-Driven Hydrogen Evolution Activity of 2D π-Conjugated Bipyridine-Based Covalent Organic Frameworks via Post-Protonation

Photocatalytic hydrogen (H₂) evolution represents a promising and sustainable technology. Covalent organic frameworks (COFs)-based photocatalysts have received growing attention. A 2D fully conjugated ethylene-linked COF (BTT-BPy-COF) was fabricated with a dedicated designed active site. The introduced bipyridine sites enable a facile post-protonation strategy to fine-tune the actives sites, which results in a largely improved charge-separation efficiency and increased hydrophilicity in the pore channels synergically. After modulating the degree of protonation, the optimal BTT-BPy-PCOF exhibits a remarkable H₂ evolution rate of 15.8 mmol g⁻¹ h⁻¹ under visible light, which surpasses the biphenyl-based COF 6 times. By using different types of acids, the post-protonation is proved to be a potential universal strategy for promoting photocatalytic H₂ evolution. This strategy would provide important guidance for the design of highly efficient organic semiconductor photocatalysts.     

Incorporation of 2,6‐Connected Azulene Units into the Backbone of Conjugated Polymers: Towards High‐Performance Organic Optoelectronic Materials

Azulene is a promising candidate for constructing optoelectronic materials. An effective strategy is presented to obtain high‐performance conjugated polymers by incorporating 2,6‐connected azulene units into the polymeric backbone, and two conjugated copolymers P(TBAzDI‐TPD) and P(TBAzDI‐TFB) were designed and synthesized based on this strategy. They are the first two examples for 2,6‐connected azulene‐based conjugated polymers and exhibit unipolar n‐type transistor performance with an electron mobility of up to 0.42 cm² V^?1 s^?1, which is among the highest values for n‐type polymeric semiconductors in bottom‐gate top‐contact organic field‐effect transistors. Preliminary all‐polymer solar cell devices with P(TBAzDI‐TPD) as the electron acceptor and PTB7‐Th as the electron donor display a power conversion efficiency of 1.82 %.     

Mo2C/Reduced Graphene Oxide Composites with Enhanced Electrocatalytic Activity and Biocompatibility for Microbial Fuel Cells

A simple, cost-effective strategy was developed to effectively improve the electron transfer efficiency as well as the power output of microbial fuel cells (MFCs) by decorating the commercial carbon paper (CP) anode with an advanced Mo₂C/reduced graphene oxide (Mo₂C/RGO) composite. Benefiting from the synergistic effects of the superior electrocatalytic activity of Mo₂C, the high surface area, and prominent conductivity of RGO, the MFC equipped with this Mo₂C/RGO composite yielded a remarkable output power density of 1747±37.6 mW m⁻², which was considerably higher than that of CP-MFC (926.8±6.3 mW m⁻²). Importantly, the composite also facilitated the formation of 3D hybrid biofilm and could effectively improve the bacteria–electrode interaction. These features resulted in an enhanced coulombic efficiency up 13.2 %, nearly one order of magnitude higher than that of the CP (1.2 %).     

Metal–Organic Coordination Strategy for Obtaining Metal-Decorated Mo-Based Complexes: Multi-dimensional Structural Evolution and High-Rate Lithium-Ion Battery Applications

Multi-dimensional metal oxides have attracted great attention in diverse applications due to their intriguing performances. However, their structural design remains challenging, particularly that based on organic chelation chemistry. Although metal–organic complexes with different architectures have been reported, their structure formation mechanisms are not well understood because of the complex chelation processes. Herein, we introduce a new metal–organic coordination strategy to construct metal-decorated (Ni, Co, Mn) Mo-based complexes ranging from 2D nanopetals to 3D microflowers. The chelating process of the metal–organic complex can be tuned by a surfactant, giving rise to different structures, and then a further metal can be appended. Thus, different metal (oxide)-decorated MoO₂/C-N structures were designed, enabling an extremely high lithium storage capability of 1018 mA h g⁻¹ and rate capacities of up to 10 A g⁻¹ over 1000 cycles. Relationships between electrochemical behavior and structure have been analyzed kinetically. A high-rate lithium-ion battery has been assembled from Ni-MoO₂/C-N and an Ni-rich layered oxide as the anode and cathode, respectively. We believe that this general metal–organic coordination strategy should be applicable to other multi-functional materials with superior capabilities.     

Electrochemical Exfoliation of Pillared‐Layer Metal–Organic Framework to Boost the Oxygen Evolution Reaction

Two‐dimensional (2D) materials and ultrathin nanosheets are advantageous for elevating the catalysis performance and elucidating the catalysis mechanism of heterogeneous catalysts, but they are mostly restricted to inorganic or organic materials based on covalent bonds. We report an electrochemical/chemical exfoliation strategy for synthesizing metal–organic 2D materials based on coordination bonds. A catechol functionalized ligand is used as the redox active pillar to construct a pillared‐layer framework. When the 3D pillared‐layer MOF serves as an electrocatalyst for water oxidation (pH 13), the pillar ligands can be oxidized in situ and removed. The remaining ultrathin (2 nm) nanosheets of the metal–organic layers are an efficient catalyst with overpotentials as low as 211 mV at 10 mA cm^?2 and a turnover frequency as high as 30 s^?1 at an overpotential of 300 mV.     

An Electron Diffraction and Crystal Chemical Investigation of Oxygen/Fluorine Ordering in Niobium Oxyfluoride, NbO2F

A careful electron diffraction study of the ReO₃-type oxyfluoride NbO₂F has revealed the presence of characteristic transverse polarized planes of diffuse intensity running through the G±〈hk(1/3)〉^* regions of reciprocal space as well as continuous rods of diffuse intensity running through the G±〈(1/2)(1/2)ξ〉^* regions of reciprocal space. The continuous planes of diffuse intensity in reciprocal space (perpendicular to each of the major crystal directions a, b and c) imply the existence of one-dimensional, oxygen/fluorine-ordered columns of atoms along 〈001〉 in real space but with no lateral correlation in the ordering from such 〈001〉 column to the next. The continuous lines of diffuse intensity along the 〈(1/2)(1/2)ξ〉^* directions of reciprocal space are ascribed to Rigid Unit Mode (RUM) rotations of the constituent MX₆ octahedral framework. A combination of bond-valence arguments and simple structure factor calculations are used to support this argument.     

Synthesis of Poly(benzothiadiazole‐co‐dithienobenzodithiophenes) and Effect of Thiophene Insertion for High‐Performance Polymer Solar Cells

We describe herein the synthesis of novel donor–acceptor conjugated polymers with dithienobenzodithiophenes (DTBDT) as the electron donor and 2,1,3‐benzothiadiazole as the electron acceptor for high‐performance organic photovoltaics (OPVs). We studied the effects of strategically inserting thiophene into the DTBDT as a substituent on the skeletal structure on the opto‐electronic performances of fabricated devices. From UV/Vis absorption, electrochemical, and field‐effect transistor analyses, we found that the thiophene‐containing DTBDT derivative can substantially increase the orbital overlap area between adjacent conjugated chains and thus dramatically enhance charge‐carrier mobility up to 0.55 cm² V^?1 s^?1. The outstanding charge‐transport characteristics of this polymer allowed the realization of high‐performance organic solar cells with a power conversion efficiency (PCE) of 5.1 %. Detailed studies on the morphological factors that enable the maximum PCE of the polymer solar cells are discussed along with a hole/electron mobility analysis based on the space‐charge‐limited current model.     

Supramolecular Enhancement of Electrochemical Nitrate Reduction Catalyzed by Cobalt Porphyrin Organic Cages for Ammonia Electrosynthesis in Water**

The electrochemical nitrate (NO₃⁻) reduction reaction (NO₃RR) to ammonia (NH₃) represents a sustainable approach for denitrification to balance global nitrogen cycles and an alternative to traditional thermal Haber-Bosch processes. Here, we present a supramolecular strategy for promoting NH₃ production in water from NO₃RR by integrating two-dimensional (2D) molecular cobalt porphyrin ( CoTPP ) units into a three-dimensional (3D) porous organic cage architecture. The porphyrin box CoPB-C8 enhances electrochemical active site exposure, facilitates substrate–catalyst interactions, and improves catalyst stability, leading to turnover numbers and frequencies for NH₃ production exceeding 200,000 and 56 s⁻¹, respectively. These values represent a 15-fold increase in NO₃RR activity and 200-mV improvement in overpotential for the 3D CoPB-C8 box structure compared to its 2D CoTPP counterpart. Synthetic tuning of peripheral alkyl substituents highlights the importance of supramolecular porosity and cavity size on electrochemical NO₃RR activity. These findings establish the incorporation of 2D molecular units into 3D confined space microenvironments as an effective supramolecular design strategy for enhancing electrocatalysis.     

Topology-Templated Synthesis of Crystalline Porous Covalent Organic Frameworks

A strategy is presented for the synthesis of crystalline porous covalent organic frameworks via topology-templated polymerization. The template is based on imine-linked frameworks and their (001) facets seed the C=C bond formation reaction to constitute 2D sp² carbon-conjugated frameworks. This strategy is applicable to templates with different topologies, enables designed synthesis of frameworks that cannot be prepared via direct polymerization, and creates a series of sp² carbon frameworks with tetragonal, hexagonal, and kagome topologies. The sp² carbon frameworks are highly luminescent even in the solid state and exhibit topology-dependent π transmission and exciton migration; these key fundamental π functions are unique to sp² carbon-conjugated frameworks and cannot be accessible by imine-linked frameworks, amorphous analogues, and 1D conjugated polymers. These results demonstrate an unprecedented strategy for structural and functional designs of covalent organic frameworks.     

The Synthesis of a Multiple D–A Conjugated Macrocycle and Its Application in Organic Photovoltaic

As a novel class of materials, D–A conjugated macrocycles hold significant promise for chemical science. However, their potential in photovoltaic remains largely untapped due to the complexity of introducing multiple donor and acceptor moieties into the design and synthesis of cyclic π-conjugated molecules. Here, we report a multiple D–A ring-like conjugated molecule ( RCM ) via the coupling of dimer molecule DBTP-C3 as a template and thiophenes in high yields. RCM exhibits a narrow optical gap (1.33 eV) and excellent thermal stability, and shows a remarkable photoluminescence yield (Φ_PL) of 11.1 % in solution, much higher than non-cyclic analogues. Organic solar cell (OSC) constructed with RCM as electron acceptor shows efficient charge separation at donor-acceptor band offsets and achieves a power conversion efficiency (PCE) of 14.2 %-approximately fourfold higher than macrocycle-based OSCs reported so far. This is partly due to low non-radiative voltage loss down to 0.20 eV and a high electroluminescence yield (Φ_EL) of 4×10⁻⁴. Our findings emphasize the potential of D–A cyclic conjugated molecules in advancing organic photovoltaic technology.     

Constructing Organic D–A–π‐A‐Featured Sensitizers with a Quinoxaline Unit for High‐Efficiency Solar Cells: The Effect of an Auxiliary Acceptor on the Absorption and the Energy Level Alignment

Four organic D–A –π‐A‐featured sensitizers (TQ1, TQ2, IQ1, and IQ2) have been studied for high‐efficiency dye‐sensitized solar cells (DSSCs). We employed an indoline or a triphenylamine unit as the donor, cyanoacetic acid as the acceptor/anchor, and a thiophene moiety as the conjugation bridge. Additionally, an electron‐withdrawing quinoxaline unit was incorporated between the donor and the π‐conjugation unit. These sensitizers show an additional absorption band covering the broad visible range in solution. The contribution from the incorporated quinoxaline was investigated theoretically by using DFT and time‐dependent DFT. The incorporated low‐band‐gap quinoxaline unit as an auxiliary acceptor has several merits, such as decreasing the band gap, optimizing the energy levels, and realizing a facile structural modification on several positions in the quinoxaline unit. As demonstrated, the observed additional absorption band is favorable to the photon‐to‐electron conversion because it corresponds to the efficient electron transitions to the LUMO orbital. Electrochemical impedance spectroscopy (EIS) Bode plots reveal that the replacement of a methoxy group with an octyloxy group can increase the injection electron lifetime by a factor of 2.4. IQ2 and TQ2 can perform well without any co‐adsorbent, successfully suppress the charge recombination from TiO₂ conduction band to I₃^? in the electrolyte, and enhance the electron lifetime, resulting in a decreased dark current and enhanced open circuit voltage (V_oc) values. By using a liquid electrolyte, DSSCs based on dye IQ2 exhibited a broad incident photon‐to‐current conversion efficiency (IPCE) action spectrum and high efficiency (η=8.50 %) with a short circuit current density (J_sc) of 15.65 mA cm^?2, a V_oc value of 776 mV, a fill factor (FF) of 0.70 under AM 1.5 illumination (100 mW cm^?2). Moreover, the overall efficiency remained at 97 % of the initial value after 1000 h of visible‐light soaking.