含骨架铁ZSM-5的合成及其负载Pt催化剂在正十二烷脱氢反应中的催化性能

采用水热合成法使铁进入分子筛MFI骨架结构,成功合成出含骨架铁的分子筛Na-[Fe]-ZSM-5,并通过离子交换法负载Pt制备脱氢催化剂Pt/Na-[Fe]-ZSM-5。通过正十二烷脱氢反应,研究了该催化剂对长链烷烃脱氢制单烯烃反应的催化性能。采用N2吸附-脱附测试、X射线衍射(XRD)、傅立叶变换红外光谱(FT-IR)、氨气程序升温脱附(NH3-TPD)、吡啶吸附的红外光谱(Py-IR)、CO化学吸附、透射电子显微镜(TEM)等不同方法对催化剂进行了表征。结果表明,通过控制骨架铁含量可调控催化剂表面酸性;含骨架铁的ZSM-5分子筛载体具有抑制负载金属晶粒长大,保持金属高分散度的作用;其负载铂催化剂Pt/Na-[Fe]ZSM-5-50具有表面弱酸中心(0.69 mmol·g^-1)和高分散Pt中心,因而具有良好的长链烷烃脱氢活性、稳定性和单烯烃选择;在转化率稳定在~20%时,TOF为4.56 s^-1,单烯烃选择性为92.7%;在实验范围内,Pt/Na-[Fe]ZSM-5催化剂表面弱酸量和脱氢反应的本征活性(TOF)均随催化剂铁含量的增加而增加。     

Comparative study of LaNiO3 and La2NiO4 catalysts for partial oxidation of methane

The catalytic activity and stability of LaNiO₃ and La₂NiO₄, prepared using a citric acid complex method, have been investigated for partial oxidation of methane (POM) to synthesis gas. The catalysts were characterized by thermo-gravimetric analysis (TG), temperature-programmed reduction (TPR) and temperature-programmed desorption of ammonia (NH₃-TPD). The results show that the catalytic activity and stability of La₂NiO₄ are higher than those of LaNiO₃, due to the stronger interactions between Ni and La₂O₃ in La₂NiO₄ and to its lower acidity as demonstrated by TPR and NH₃-TPD. TG result indicates that carbon deposition occurs on both catalysts, and the carbon species deposited on La₂NiO₄ are mainly metal carbides, while on LaNiO₃ are mainly graphite.     

一步水热合成Y-Co3O4复合氧化物催化剂及催化分解N2O

用一步水热、分步水热、浸渍等方法分别制备Y-Co₃O₄复合氧化物,用于催化分解N₂O的反应,其中,一步水热法制备的催化剂活性较高。再用一步水热法制备了不同Y/Co物质的量比的Y-Co₃O₄复合氧化物,在优化出的催化剂（0.03Y-Co₃O₄）表面浸渍K₂CO₃溶液,制备K改性催化剂（0.02K/0.03Y-Co₃O₄）。用X射线衍射（XRD）、N₂物理吸附、H₂程序升温还原（H₂-TPR）、O₂程序升温脱附（O₂-TPD）、扫描电镜（SEM）、X射线光电子谱（XPS）等技术表征催化剂结构。研究发现,Co₃O₄和Y-Co₃O₄同为尖晶石结构,但Y-Co₃O₄的催化活性显著高于Co₃O₄。K改性增加了催化剂表面的活性位（Co²⁺）,还有利于吸附氧的脱除,从而提高了催化剂活性。在无氧无水、有氧无水、有氧有水气氛中,K改性催化剂上的N₂O全分解温度分别为325、350、375 ℃,催化剂活性较高。有氧有水气氛350 ℃连续反应50 h,K改性催化剂上N₂O分解率保持90%以上,稳定性较高。研究发现,Y-Co₃O₄及K改性催化剂上N₂O分解反应的E_a和lnA之间存在动力学补偿效应。     

铁铜双金属催化剂选择性催化氧化氨为氮气

固定铜铁的总质量不变, 采用共浸渍法制备铜铁双金属催化剂. 为了更好地了解催化剂的性质, 分别用N₂吸附-脱附、H₂-程序升温还原(H₂-TPR)、NH₃-程序升温脱附(NH₃-TPD)、X射线衍射(XRD)和X射线光电子能谱(XPS)方法对制备的催化剂进行表征. 研究发现在100000 h^-1空速下, 铜铁双金属催化剂呈现出好的活性和氮气选择性. 在低温区, 随着铜含量的增加, 活性和氮气的选择性增加, 然而在高温区氮气的选择性直接和铁的含量相关. 其中催化剂Fe_0.25Cu_0.75/ZSM-5, 在350℃氨的转化率达到最高, 在300℃氮气的选择性上升到97%. Fe_0.75Cu_0.25/ZSM-5 在500 ℃有很高的氮气选择性甚至可以达到98%. 并且所有的催化剂均产生很少的N₂O副产物. 表征结果显示催化剂的酸量和铜物种的含量可以影响催化剂的活性, 并且高的还原能力和铁含量有助于高温氮气选择性的提高.     

水热合成Co3O4的制备参数调变及其催化分解N2O性能

以十六烷基三甲基溴化胺（CTAB）为模板剂,通过调变CTAB浓度水热合成了氧化钴前驱体,焙烧制得棒状形貌的Co₃O₄,在其表面浸渍K₂CO₃溶液制得K改性的Co₃O₄催化剂,用于N₂O分解。用X射线衍射（XRD）、N₂物理吸附（BET）、扫描电镜（SEM）、X射线光电子能谱（XPS）、H₂程序升温还原（H₂-TPR）和O₂程序升温脱附（O₂-TPD）等技术对催化剂进行了表征,考察了CTAB/钴及尿素/钴物质的量比等制备参数对Co₃O₄催化分解N₂O活性的影响。结果表明,CTAB浓度为0.05 mol/L、CTAB/钴离子物质的量比为1、尿素/钴离子物质的量比为4时,所制备的Co₃O₄催化剂具有较高的N₂O分解活性,而K改性可以进一步提升其催化性能。K改性的Co₃O₄在有氧有水气氛中400℃下进行N₂O分解反应,50 h后N₂O转化率仍保持在91%以上。     

Fe- and Cu-oxides supported on γ-Al2O3 as catalysts for the selective catalytic reduction of NO with ethanol. Part I: catalyst preparation,characterization, and activity

Fe- and Cu-oxides supported on γ-alumina (γ-Al₂O₃; metal loading of 3 mass %) were investigated as alternative catalysts to the conventional Ag-based system in the selective catalytic reduction of NO with ethanol (EtOH-SCR). The catalysts were characterized by elemental analysis, N₂ sorption, X-ray diffraction, temperature-prgrammed desorption of NH₃, temperature-programmed reduction with H2, diffuse reflectance UV-VIS (DR-UV-VIS) spectroscopy, and compared with 3 mass % Ag/γ-Al₂O₃ as a reference catalyst. Catalytic experiments were carried out between 423 K and 773 K in the steady state and by temperature-programmed surface reaction (TPSR) experiments. For all catalysts, the highest NO conversion (900 ppm (ppm = parts of the mixture component per million parts of all mixture components) NO, 900 ppm EtOH, 0.5 vol. % H₂O, 4 vol. % O₂ in He) was found at 573 K. While 84 % of NO were converted over the Ag-based catalysts, only 20–60 % NO conversion was observed for the Fe- and Cu-containing catalysts. Total oxidation of ethanol as an unwanted side reaction occurs over 3 mass % Cu on γ-Al₂O₃ already at 573 K, whereas the highest activity of 3 mass % Fe on γ-Al₂O₃ for this conversion was reached at 743 K. For lower temperatures, partial oxidation of ethanol leads to organic by-products which can act as active intermediates in EtOH-SCR. TPSR experiments show that ethanol reacts over both the Fe- and the Cu-based catalysts to organic by-products, such as ethene or acetaldehyde, which affect the EtOH-SCR reaction.     

Effect of Calcination Temperature on Surface Oxygen Vacancies and Catalytic Performance Towards CO Oxidation of Co3O4 Nanoparticles Supported on SiO2

Co₃O₄/SiO₂ catalysts for CO oxidation were prepared by conventional incipient wetness impregnation followed by calcination at various temperatures. Their structures were char-acterized with X-ray diffraction (XRD), laser Raman spectroscopy, X-ray photoelectron spectroscopy (XPS), temperature-programmed reduction (TPR) and X-ray absorption fine structure (XAFS) spectroscopy. Both XRD and Raman spectroscopy only detect the ex-istence of Co₃O₄ crystallites in all catalysts. However, XPS results indicate that excess Co²⁺ ions are present on the surface of Co₃O₄ in Co₃O₄(200)/SiO₂ as compared with bulk Co₃O₄. Meanwhile, TPR results suggest the presence of surface oxygen vacancies on Co₃O₄ in Co₃O₄(200)/SiO₂, and XAFS results demonstrate that Co₃O₄ in Co₃O₄(200)/SiO₂ con-tains excess Co²⁺. Increasing calcination temperature results in oxidation of excess Co²⁺ and the decrease of the concentration of surface oxygen vacancies, consequently the for-mation of stoichiometric Co₃O₄ on supported catalysts. Among all Co₃O₄/SiO₂ catalysts,Co₃O₄(200)/SiO₂ exhibits the best catalytic performance towards CO oxidation, demon-strating that excess Co²⁺ and surface oxygen vacancies can enhance the catalytic activity of Co₃O₄ towards CO oxidation. These results nicely demonstrate the effect of calcination temperature on the structure and catalytic performance towards CO oxidation of silica-supported Co₃O₄ catalysts and highlight the important role of surface oxygen vacancies on Co₃O₄.     

微量Li助剂对Co/AC催化剂合成高碳醇性能的影响

采用等体积浸渍法制备了含微量Li 的15Co_xLi/AC 催化剂,考察了微量Li 助剂对15Co/AC催化剂上CO加氢合成高碳醇性能的影响. 采用X射线衍射、程序升温还原和程序升温表面反应技术对15Co_xLi/AC 催化剂进行了表征,结果表明,微量Li 的添加可以提高催化剂上CO加氢活性、生成C₅₊烃的选择性、合成醇的选择性以及高碳醇的分布. 这主要是由于微量Li 助剂与Co物种形成了弱相互作用,促进了催化剂Co物种的分散,形成较小Co晶粒,促进了Co₂C的形成.     

Ammoxidation of 3-picoline to nicotinonitrile using silica-supported VCrO catalysts

A series of vanadium–chromium oxide (VCrO) catalysts supported on silica was prepared by wetness impregnation method with different Cr/V molar ratios from 0.2 to 1.0. These catalysts were characterized by XRD, TG, temperature-programmed desorption of ammonia (NH₃-TPD), X-ray photoelectron spectra (XPS), and Raman spectroscopy, and their catalytic activity was evaluated in the ammoxidation of 3-picoline (3-PIC) to nicotinonitrile (NN). The results of XRD, TG, Raman, and XPS confirmed that the active components on the silica surface were mainly amorphous V₂O₅ and CrVO₄. The results of NH₃-TPD showed that acidity of the catalysts decreased with the increase of Cr/V ratio. Catalytic results revealed that acidity of the catalysts was closely related to the catalytic performance. Low acidity gave low conversion of 3-PIC and high NN selectivity. Furthermore, the conversion of 3-PIC increased with rise in reaction temperature, and the selectivity of NN was slightly influenced by the 3-PIC conversion. Therefore, among the catalysts (Cr/V ratio was 0.2, 0.4, 0.6) tested, Cr/V-0.6 catalyst retained the lowest acidity and exhibited the highest selectivity and yield of NN in the ammoxidation of 3-PIC.     

A new strategy to improve catalytic activity for chlorinated volatile organic compounds oxidation over cobalt oxide: Introduction of strontium carbonate

Co₃O₄–SrCO₃ catalysts with various Sr/Co ratios were synthesized by the coprecipitation method, and their properties were tuned by adjusting the Sr/Co molar ratio. Furthermore, the catalytic combustion of vinyl chloride (VC) was used to evaluate the catalytic activity of the Co₃O₄–SrCO₃ catalysts. The physicochemical properties of the catalysts were studied by X-ray diffraction (XRD), infrared spectroscopy (IR), N₂ sorption, scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), H₂ temperature-programmed reduction (H₂-TPR) and VC temperature-programmed desorption (VC-TPD). The results showed that the Co₃O₄–SrCO₃ catalysts exhibited composite phases of Co₃O₄ and SrCO₃ and the presence of interactions between them. As a result, the crystallization of the Co₃O₄ phase for the Co₃O₄–SrCO₃ catalysts was restrained, and the state of Co on the catalyst surface was adjusted. Furthermore, the reducibility and VC adsorption capacity of the Co₃O₄–SrCO₃ catalysts with Sr/Co molar ratios of 0.2 and 0.4 were enhanced compared with those of the Co₃O₄ catalyst. Otherwise, catalyst SrCo-0.4 exhibited excellent catalytic performance, accompanied by the highest reaction rate and the lowest apparent activation energy. More importantly, the optimized SrCO₃–Co₃O₄ catalyst showed superior catalytic performance compared with other transition metal oxides in previous literature. These results brought a new idea for promoting the activity of transition metal catalysts for the deep oxidation of chlorinated volatile organic compounds (CVOCs) by introducing alkaline-earth metal salts.     

钾调变Mo/SBA-15催化剂用于乙烷选择氧化制乙醛

采用两步浸渍法制备钾改性的Mo/SBA-15 催化剂. 采用N₂吸附,X射线衍射（XRD）,透射电镜（TEM）,紫外-可见（UV-Vis）吸收光谱,拉曼（Raman）光谱,NH₃程序升温脱附（NH₃-TPD）,CO₂程序升温脱附（CO₂-TPD）,H₂程序升温还原（H₂-TPR）等手段表征催化剂的物理化学性质. 研究结果表明,在Mo_0.75/SBA-15 中添加K之后,有新物种钾钼酸盐生成,并且当K/Mo的摩尔比不同时,钼物种的存在状态也不同. 添加钾之后,催化剂的活性和总醛（甲醛、乙醛、丙烯醛）的选择性均有所提高,并且受钾的添加量影响. 在575 ℃时,在K_0.25-Mo_0.75/SBA-15催化剂上醛的收率可高达8.5%（摩尔分数）.     

硼和氟掺杂ZSM-5分子筛的制备及其甲醇制丙烯反应性能

采用两步水热晶化法,通过在合成体系中加入硼酸、氟化铵、氟硼酸铵,合成出了硼和氟改性的ZSM-5分子筛。利用X射线衍射、氮气吸附-脱附、29Si固体核磁共振波谱、傅里叶变换红外光谱、扫描电子显微镜以及NH₃程序升温脱附等测试手段对样品进行了表征。结果表明：硼和氟掺杂条件下可以合成具有较高结晶度的ZSM-5分子筛,杂原子掺杂提高了分子筛的硅铝比;硼和氟掺杂可以显著降低ZSM-5分子筛的Lewis酸量,但提高了Brønsted酸量;硼和氟共同作用可以降低ZSM-5分子筛的颗粒尺寸。甲醇制丙烯评价结果显示：较低的Lewis酸量和适宜的Brønsted酸性有利于提高丙烯选择性和催化剂寿命;NH₄BF₄改性的ZSM-5分子筛（Z5-BF2）表现出较高的丙烯选择性和较长的催化剂寿命。     

金属配比对IrRe催化剂结构及其甘油氢解催化性能的影响

采用分步-等体积浸渍法制备了不同Ir/Re摩尔比的Ir-Re/G-6双金属催化剂,并应用于甘油氢解制备1,3-丙二醇反应,利用XRD、TEM、H₂-TPR、XPS、NH₃-TPD、Py-IR和CO-DRIFTs等手段对催化剂进行了系统表征,探讨了Ir/Re摩尔比对Ir-Re催化剂结构、性质及其催化性能的影响.研究结果表明：Ir/Re摩尔比对Ir-Re双金属催化剂的合金结构和酸性能影响显著,并决定了其甘油氢解催化性能;当Ir/Re摩尔配比为1.0时,能形成高度分散的Ir-Re合金结构催化剂,具有最多的表面Brønsted酸性位（Ir-Re-OH）,表现出最高的甘油转化率和较好的1,3-丙二醇选择性.     

Catalytic Performance of Spherical MCM-41 Modified with Copper and Iron as Catalysts of NH3-SCR Process

Spherical MCM-41 with various copper and iron loadings was prepared by surfactant directed co-condensation method. The obtained samples were characterized with respect to their structure (X-ray diffraction, XRD), texture (N₂ sorption), morphology (scanning electron microscopy, SEM), chemical composition (inductively coupled plasma optical emission spectrometry, ICP-OES), surface acidity (temperature programmed desorption of ammonia, NH₃-TPD), form, and aggregation of iron and copper species (diffuse reflectance UV-Vis spectroscopy, UV-Vis DRS) as well as their reducibility (temperature programmed reduction with hydrogen, H₂-TPR). The spherical MCM-41 samples modified with transition metals were tested as catalysts of selective catalytic reduction of NO with ammonia (NH₃-SCR). Copper containing catalysts presented high catalytic activity at low-temperature NH₃-SCR with a very high selectivity to nitrogen, which is desired reaction products. Similar results were obtained for iron containing catalysts, however in this case the loadings and forms of iron incorporated into silica samples very strongly influenced catalytic performance of the studied samples. The efficiency of the NH₃-SCR process at higher temperatures was significantly limited by the side reaction of direct ammonia oxidation. The reactivity of ammonia molecules chemisorbed on the catalysts surface in NO reduction (NH₃-SCR) and their selective oxidation (NH₃-SCO) was verified by temperature-programmed surface reactions.     

Effect of ZSM-5 zeolite morphology on the catalytic performance of the alkylation of toluene with methanol

A series of ZSM-5 zeolites, with the morphologies of sphere, sphere with cubic particles on the surface, and cubic particles, were synthesized by hydrothermal method using n-butylamine as the template, assisted by the addition of NaCl and crystal seed. X-ray diffraction(XRD),scanning electron microscope(SEM), X-ray fluorescence(XRF) and temperature-programmed desorption of ammonia(NH3-TPD) were used to characterize these samples. The samples were tested with toluene methylation reaction. The modified sample composed of spherical particles with 3 μm crystal particles on the surface had a para-xylene selectivity of 95% and maintained 79% of the initial conversion after running the reaction for 50 h. This modified sample showed the best stability among the tested three modified samples.     

Preparation of nanosheet Fe-ZSM-5 catalysts, and effect of Fe content on acidity, water, and sulfur resistance in the selective catalytic reduction of NO x by ammonia

Direct synthesis of nanosheet Fe-ZSM-5 catalysts and their use for selective catalytic reduction (SCR) of NO _x by ammonia were studied. XRD, BET, SEM, EPR, and NH₃-TPD were used to understand the properties of catalysts with different iron loading. XRD confirmed the presence of the ZSM-5 crystal phase, and there was no Fe₂O₃ phase on the surface of the crystals. SEM showed the Fe-ZSM-5 catalysts comprised microspheres made up of nanosheets. EPR indicated that the iron was present as isolated Fe³⁺and FeO _x oligomers uniformly dispersed throughout the crystals. NH₃-TPD indicated that Fe-ZSM-5 (20,1:1) had maximum acid sites and density at approximately 250 and 450 °C, respectively. Fe-ZSM-5 (20,1:1) had the highest activity in the SCR reaction with NH₃. It was also confirmed that Fe-ZSM-5 (20,1:1) had excellent resistance to SO₂ and H₂O under the SCR reaction conditions. The effects of water vapor and SO₂, iron loading, and the Si/(Fe + Al) ratio were also investigated for these catalysts.     

液晶模板合成多级孔ZSM-5分子筛及其催化应用

以哌嗪基丙基甲基二甲氧基硅烷偶联剂(PZPMS)和阳离子表面活性剂十六烷基三甲基溴化铵(CTAB)为复合液晶模板,在水热条件下合成多级孔ZSM-5分子筛.采用XRD、 SEM、 BET、 XRF、 FT-IR和NH_3-TPD对催化剂的性能进行了表征.结果表明, PZPMS/CTAB复合液晶模板的加入可以减小颗粒尺寸,增加外表面积,有利于合成多级孔ZSM-5分子筛.加入液晶模板可以有效调整催化剂表面B酸与L酸量比例,改善催化剂表面酸性.对合成的催化剂样品在MTA反应中进行了催化性能测试,样品在反应中对芳烃表现出较高的选择性,催化寿命有不同程度的提高.     

Al含量对Pt-SO2-4 /ZrO2-Al2O3固体超强酸催化

通过向SO^2-₄ /ZrO₂催化剂中同时引入适量的Pt和Al₂O₃, 制备出了具有较高催化性能和稳定性的Pt-SO^2-₄ /ZrO₂-Al₂O₃型固体超强酸催化剂. 以正戊烷异构化反应为探针, 考察了Al含量对催化剂性能的影响; 并采用X射线衍射(XRD)、比表面积测定(BET)、红外(IR)光谱、程序升温还原(TPR)、热重-差热分析(TG-DTA)和氨-程序升温脱附(NH₃-TPD)手段对催化剂进行了表征. 结果表明, Al能够提高ZrO₂的晶化温度, 抑制硫的分解, 增加催化剂的比表面积, 增强硫氧键的结合, 提高催化剂的还原性能, 增加催化剂的酸强度和酸总量. 当Al₂O₃含量(质量分数, w)为5.0%时, Pt-SO^2-₄ /ZrO₂-Al₂O₃固体超强酸催化剂的催化活性最好, 在100 h内异戊烷收率可稳定在52.0%以上, 选择性在98.2%以上.     

Effect of Mo content in MoO3/g-Al2O3 on the catalytic activity for transesterification of dimethyl oxalate with phenol

The influence of molybdenum content on the catalytic performance in the transesterification of dimethyl oxalate (DMO) with phenol to methyl phenyl oxalate (MPO) and diphenyl oxalate (DPO) was investigated. The results indicated that the MoO₃/Al₂O₃ catalyst with 14 wt% Mo content gave maximal DPO yield with 6.1% and 75.1% DMO conversion. The component, structure and phase of MoO₃/Al₂O₃ catalysts were characterized by means of X-ray diffraction (XRD), BET specific surface area, temperature-programmed desorption of ammonia (NH₃-TPD), and FTIR analysis of adsorbed pyridine. This revised version was published online in June 2006 with corrections to the Cover Date.     

Characteristics of Active Site Formation in Co-Containing Catalysts for CO Oxidation on Chemically Different Supports

We have studied the catalytic activity in CO oxidation for cobalt-containing (1.2 mass % Co) catalysts on different supports: ZSM-5, Al₂O₃, SiO₂, and ERI. Using X-ray photoelectron spectroscopy (XPS), diffuse reflection electronic spectroscopy, and thermal programmed reduction we have established that the differences in the activity of Co-containing catalysts are due to different localization of the cobalt cations, the nature of their distribution in the surface layer of the catalyst, and the presence of cobalt ions Co_Oh in an environment of intralattice oxygen which have high reducibility.