Insertion reactions of difluorocarbene generated by pyrolysis of hexafluoropropene oxide to OH bond

ROCHF₂-type fluorinated ethers were synthesized by the reaction of hexafluoropropene oxide (HFPO) with alcohol or phenol. In this reaction, although the insertion reaction of difluorocarbene to OH bond and the nucleophilic attack of alcohol or phenol to HFPO were competition, the insertion reaction proceeded predominantly to give fluorinated ether in the case of low nucleophilic alcohol or phenol. In addition, high reaction pressure is advantageous to the selectivity of the fluorinated ethers in the reaction of HFPO with (CF₃)₂CHOH or C₆F₅OH.     

Preparation and applications of novel fluoroalkyl end-capped 2-acrylamido-2-methylpropanesulfonic acid oligomer/clay nanocomposites

New fluoroalkyl end-capped 2-acrylamido-2-methylpropanesulfonic acid oligomers/clay composites were prepared by reaction of fluoroalkanoyl peroxide with the corresponding monomer in the presence of clay in aqueous solutions. These obtained fluorinated composites were nanometer size-controlled and were found to exhibit a good dispersibility in water and polar organic solvents such as methanol. The contents of clay in these nanocomposites were estimated to be 3～19% by the thermogravimetric analysis measurements. X-ray diffraction spectra showed the successful intercalation of fluorinated oligomers into the interlayer spaces of clay. These fluorinated clay nanocomposites were applied to the surface modification of poly(vinyl alcohol). In addition, these fluorinated nanocomposites were found to interact with methylene blue effectively to afford the fluorinated oligomers/clay/methylene blue nanocomposites.     

Behavior of 10-(perfluorohexyl)-decanol, a partially fluorinated analog of hexadecanol, at the air-water interface

10-(Perfluorohexyl)-decanol is a partially fluorinated analog of hexadecanol, an important detergent alcohol. With a melting point of T=48.82 °C and a melting enthalpy of ΔH=53.96 J/g, the intermolecular interactions of the fluorinated alcohol are weaker compared to hexadecanol (T=52.67 °C, ΔH=244.41 J/g). The behavior of this fluorinated alcohol at the air-water interface was studied on five different subphases, namely, water, NaCl (150 mM), CaCl₂ (2 mM), HCl (pH=2.0), and urea (0.5 M). Similar to other partially fluorinated amphiphiles, the compression isotherms of the fluorinated alcohol on all subphases are more expanded compared to the hydrocarbon alcohol with a limiting area of 32-36 Å² per molecule and a temperature-dependent phase transition at 5.6-8.2 mN/m (37 °C, compression rate of 10 mm/min). The dependence of the compression isotherms of 10-(perfluorohexyl)-decanol on subphase composition and temperature follows the trends reported for tetra- and hexadecanol. In particular, a shift to smaller molecular areas with increasing temperatures was observed on all five subphases. The shift to smaller molecular areas on urea indicates that in the case of 10-(perfluorohexyl)-decanol the effect is largely due to a loss of material from the air-water interface during compression of the monolayers. However, a squeezing-out of water molecules from the hydration sphere of the polar headgroup may still occur but can not be unambiguously proven.     

A Study of the Solvation Structure of l‐Leucine in Alcohol–Water Binary Solvents through Molecular Dynamics Simulations and FTIR and NMR Spectroscopy

The solvation structures of l ‐leucine (Leu) in aliphatic‐alcohol–water and fluorinated‐alcohol–water solvents are elucidated for various alcohol contents by using molecular dynamics (MD) simulations and IR, and ¹H and ¹³C NMR spectroscopy. The aliphatic alcohols included methanol, ethanol, and 2‐propanol, whereas the fluorinated alcohols were 2,2,2‐trifluoroethanol and 1,1,1,3,3,3‐hexafluoro‐2‐propanol. The MD results show that the hydrophobic alkyl moiety of Leu is surrounded by the alkyl or fluoroalkyl groups of the alcohol molecules. In particular, TFE and HFIP significantly solvate the alkyl group of Leu. IR spectra reveal that the Leu C?H stretching vibration blueshifts in fluorinated alcohol solutions with increasing alcohol content, whereas the vibration redshifts in aliphatic alcohol solutions. When the C?H stretching vibration blueshifts in the fluorinated alcohol solutions, the hydrogen and carbon atoms of the Leu alkyl group are magnetically shielded. Consequently, TFE and HFIP molecules may solvate the Leu alkyl group through the blue‐shifting hydrogen bonds.     

Fluorination of polymers by sulfur hexafluoride gas under electric discharge

Fluorination of low-density polyethylene, polyacetylene, and poly(vinyl alcohol) was carried out using SF₆ gas under electric discharge. The polymers were partially fluorinated and the extent of fluorination was more in the case of poly (vinyl alcohol) than the other two polymers. The fluorinated polymers were characterized by elemental analysis (Fluorine), IR, and x-ray diffraction. Optical transparency of the films was also measured. The fluorinated polymers show better solvent resistance and decreased transparency than the virgin polymer. © 1994 John Wiley & Sons, Inc.     

Alpha-helix formation in melittin and beta-lactoglobulin A induced by fluorinated dialcohols

Extensive study of the effect of fluorinated alcohols on protein conformations, notably the induction of alpha-helix formation, is important because of its wide range of applications. Circular dichroism (CD) was used to show that the enhancement of helix induction in beta-lactoglobulin A and melittin by the fluorinated diols 2,2,3,3-tetrafluoro-1,4-butanediol (TFBD), 2,2,3,3,4,4-hexafluoro-1,6-pentanediol (HFPD), and 2,2,3,3,4,4,5,5-octafluoro-1,6-hexanediol (OFHD) increases in the order TFBD < HFPD < OFHD. For fluorinated diols and monoalcohols the effectiveness of helix induction was found to increase exponentially with increasing number of fluorine atoms per alcohol molecule, and OFHD was found to be more effective than any previously reported fluorinated alcohol. Formation of standard micelles was ruled out as the cause of the enhanced helix induction by the fluorinated diols. The negligible red-edge excitation shift in the fluorescence of melittin indicated that the fluorinated diol/water solvent shell surrounding the tryptophan chromophore is less immobilized than are molecules in a lamellar vesicle.     

Fluorinated alcohols as surface‐active agents in cationic photopolymerization of epoxy monomers

Fluorinated alcohols were used as surface modifying agents, through chain transfer mechanism in cationic UV curing of an epoxy system. The fluorinated alcohols were able to induce surface modification already at very low concentration (below 1 wt %). It has been shown that the surface modification depended on the concentration of the fluoroalcohols, on the length of the fluoroalkyl chain, and on the length of the methylene spacer between the fluorinated chain and the OH group. The strong increase on hydrophobicity in the presence of the synthesized fluorinated alcohol, CF₃(CF₂)₉(CH2)₁₀OH, was attributed to the higher fluorocontent of the chain as well as to a self‐organization effect. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4144–4150, 2005     

Phase Diagrams and Solubilization of Chlorocarbons in Chlorocarbon/Water/Anionic Surfactant/Alcohol Microemulsion Systems

The solubilization abilities of various chlorocarbons were investigated in a middle phase microemulsion system anionic surfactant sodium dodecyl sulfate (SDS) or sodium dodecyl sulfonate (AS)/n-butanol/chlorocarbon/brine with a ε-β fishlike phase diagram. The composition of the balanced interfacial layer of the microemulsion and some other parameters are calculated. The result shows that surfactant little dissolves in water and chlorocarbon phases, while alcohol mainly dissolves in water and oil phases besides in the interfacial layer. The order of the solubilization ability is dichloromethane (CH₂Cl₂) ～ carbon tetrachloride (CCl₄) > tetrachloroethylene (PCE) > o-dichloro-benzene. The solubility of the alcohol decreases with the increase in NaCl concentrations, which should be compensated by the increase in the amount of alcohol as cosolvent (Cs), so as to maintain the balanced interfacial layer. Salinity has little effect on the partition of surfactant between phases.     

Facile creation of superoleophobic and superhydrophilic surface by using perfluoropolyether dicarboxylic acid/silica nanocomposites

Perfluoropolyether dicarboxylic acid [HO(O?)CCF(CF₃){OCF₂CF(CF₃)}_nO(CF₂)₅O{CF(CF₃)CF₂O}_m―CF(CF₃)C(?O)OH; n + m = 6–12; PFPE‐DAcD] was applied to the preparation of PFPE‐DAcD/SiO₂ nanocomposites by the sol–gel reactions of the corresponding diacid with tetraethoxysilane in the presence of silica nanoparticles under alkaline conditions. PFPE‐DAcD/SiO₂ nanocomposites thus obtained were found to exhibit a good dispersibility and stability in not only water but also the traditional organic solvents such as methanol, ethanol, 2‐propanol, tetrahydrofuran, and 1,2‐dichloroethane. Field emission scanning electron micrograph (FE‐SEM) and dynamic light‐scattering (DLS) measurements show that these fluorinated composites are nanometer size‐controlled very fine particles. Dodecane and water contact angle measurements on the modified glass, filter paper, and polyester fabric surfaces treated with these fluorinated nanocomposites were found to exhibit the superoleophobicity and superhydrophilicity. Especially, the modified polyester fabric swatch was applied to the oil/water separation to give the high separation efficiency. Copyright © 2015 John Wiley & Sons, Ltd.     

Synthesis of phospholipids containing perfluorooctyl group and their interfacial properties

Highly fluorinated single-chained and/or double-chained phospholipids containing the perfluorooctyl group as the terminal segment of hydrophobic chains and a phosphocholine moiety as the hydrophilic headgroup were synthesized in order to investigate the effect of fluorinated segments on the stability of phospholipid monolayers formed at the air-water interface. Judging from the equilibrium spreading pressures (π_es) of their monolayers at the air-water interface, all of the fluorinated phospholipids formed more stable monolayers than the corresponding non-fluorinated counterparts. In addition, the fluorinated double-chained phosphatidylcholine containing C-C triple bond (monoyne group) formed stable and fluid vesicle membranes in water, although the single-chained phospholipids did not form vesicle membranes but micellar solutions under the present conditions.     

New hydrofluoropolyethers: I. Synthesis and reaction pathway evaluation

A novel family of hydrofluoropolyethers (HFPEs) was obtained with 60-80% selectivity by hydrogenation of perfluoropolyether acyl chlorides with Pt/CaF₂. These compounds are characterized by a macromeric fluorinated body end-capped, on one or both sides, by a (1,1-difluoro)ethoxy group. A reaction pathway for the reduction was proposed consistently with the observed yields and side products. The hemiacetal originated by reaction of the aldehyde (first product of reduction) with the corresponding alcohol was postulated to be the key precursor leading to the HFPE. The metal appears to play a fundamental role promoting the hydrogenolysis of this unexpected intermediate. Exhaustive reduction of the alcohol, generally recognized as the path affording hydrocarbons in the hydrogenation of acyl chlorides, was excluded by products analysis and by specific experiments.     

Pd/PMO-SBA-15 催化剂催化苯甲醇选择氧化反应性能

 研究了 PMO-SBA-15 材料负载的金属钯纳米粒子 (Pd/PMO-SBA-15) 在水相中催化苯甲醇选择氧化制苯甲醛的反应. 考察了纳米粒子种类、氧化剂用量、反应时间和反应温度等对苯甲醇转化率及苯甲醛选择性的影响. 结果表明, 以水为溶剂, 以 H2O2 (30%) 为氧化剂时, 可得到较高的苯甲醇转化率和苯甲醛选择性. 当以 0.05 g 的 2%Pd/PMO-SBA-15 为催化剂, H2O2 用量为 1.5 ml, 反应温度为 80 oC, 反应 4 h 时, 苯甲醇转化率和苯甲醛选择性分别达到 97.1% 和 100.0%. 对该催化体系的重复使用性能进行了考察. 结果发现, 随着使用次数的增加, 苯甲醇转化率有所下降, 但苯甲醛选择性保持不变.     

Synthesis of fluorinated oligomers for supercritical carbon dioxide applications

Syntheses of various fluorine‐based surfactants, namely fluorinated‐segment‐containing block co‐oligomers, were achieved by the radical polymerization of mainly acrylate‐based monomers. These types of surfactants serve as stabilizers for supercritical carbon dioxide (scCO₂) media based applications, for which the effective solubilization of materials in the supercritical phase is generally not possible because of solubility problems faced when CO₂ is involved. Initially, a difunctional fluorinated initiator was synthesized in two steps. First, 4,4′‐azobis‐4‐cyanovaleric acid was chlorinated with SOCl₂, and then the product, 4,4′‐azobis‐4‐cyanovaleryl chloride, was reacted with a fluorinated alcohol to obtain the initiator for the polymerization reactions. The synthesized triblock co‐oligomers consisted of fluorinated side blocks and a hydrocarbon intermediate block. Efficient solubilization of the materials in scCO₂ was observed. It was experimentally shown that the solubility efficiency was affected by specific interactions between CO₂ and the oligomers, and these were determined by the nature and size of the inner block and by the chain length of the fluorinated side blocks in comparison with the inner block. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5312–5322, 2005     

Preparation and properties of fluorinated carboxylic acid/silica nanocomposite-encapsulated low molecular weight compounds

Perfluoro-2-methyl-3-oxahexanoic acid/silica nanocomposites [R_F-CO₂H/SiO₂] were prepared by the sol–gel reaction of tetraethoxysilane in the presence of silica nanoparticles and the corresponding fluorinated carboxylic acid under alkaline conditions. R_F-CO₂H/SiO₂ nanocomposites were found to exhibit no weight loss in proportion to the contents of fluorinated carboxylic acid in the composites even after calcination at 800 °C. The modified glass surface treated with the R_F-CO₂H/SiO₂ nanocomposites was shown to give a good oleophobicity with superhydrophilicity imparted by fluorinated carboxylic acid in the composites. R_F-CO₂H/SiO₂ nanocomposites were also applied to the encapsulation of a variety of low molecular weight aromatic and aliphatic compounds such as bisphenol AF [BPAF], bisphenol A [BPA], 4,4′-biphenol [BPOH], octafluoro-4,4′-biphenol [FBPOH], 4,4′-bis(triethoxysilyl)-1,1′-biphenyl [BTSBP], 3-(trihydroxysilyl)propane-1-sulfonic acid [THSP], α-cyclodextrin (α-CD), β-cyclodextrin (β-CD), and γ-cyclodextrin (γ-CD). Encapsulated aromatic compounds possessing acidic hydroxyl groups such as BPAF, BPA, and FBPOH in the R_F-COOH/SiO₂ nanocomposites were found to exhibit no weight loss corresponding to the contents of aromatic compounds in the composites even after calcination at 800 °C. On the other hand, encapsulated aromatic compounds possessing no acidic hydroxyl groups such as BTSBP and aliphatic compounds (THSP, α-, β-, and γ-CD) gave a clear weight loss corresponding to the contents of these compounds in the composites after calcination. In addition, the fluorinated silica nanocomposite-encapsulated these compounds were applied to the surface modification of glass to exhibit a good oleophobicity with superhydrophilicity imparted by fluorinated carboxylic acid on the surface.

Preparation and applications of a variety of fluoroalkyl end-capped oligomer/hydroxyapatite composites

A variety of fluoroalkyl end-capped oligomers were applied to the preparation of fluorinated oligomer/hydroxyapatite (HAp) composites (particle size: 38-356 nm), which exhibit a good dispersibility in water and traditional organic solvents. These fluoroalkyl end-capped oligomer/HAp composites were easily prepared by the reactions of disodium hydrogen phosphate and calcium chloride in the presence of self-assembled molecular aggregates formed by fluoroalkyl end-capped oligomers in aqueous solutions. In these fluorinated HAp composites thus obtained, fluoroalkyl end-capped acrylic acid oligomers and 2-methacryloyloxyethanesulfonic acid oligomer/HAp nanocomposites afforded transparent colorless solutions toward water; however, fluoroalkyl end-capped N,N-dimethylacrylamide oligomer and acryloylmorpholine oligomer were found to afford transparent colorless solutions with trace amounts of white-colored HAp precipitants under similar conditions. HAp could be encapsulated more effectively into fluorinated 2-methacryloyloxyethanesulfonic acid oligomeric aggregate cores to afford colloidal stable fluorinated oligomer/HAp composites, compared to that of fluorinated acrylic acid oligomers. These fluorinated oligomer/HAp composites were applied to the surface modification of glass and PVA to exhibit a good oleophobicity imparted by fluorine. HAp formation was newly observed on the modified polyethylene terephthalate film surface treated with fluorinated 2-methacryloyloxyethanesulfonic acid oligomers and acrylic acid oligomer/HAp composites by soaking these films into the simulated body fluid.     

Alcohol-Induced Strong Metal-Support Interactions in a Supported Copper/ZnO Catalyst

Tuning the strong metal-support interaction (SMSI) in metal catalysts is a promising strategy to improve their catalytic performance. In this article, we systematically investigated the influences of different alcohol/water mixtures on the evolution of the interfacial structure of Cu/ZnO catalysts in the reduction stage. A series of in situ characterization and theoretical simulation studies were performed to elucidate the various mechanisms of alcohol induced SMSI. It was found that when methanol/water is added to H₂ during the reduction pretreatment, more oxygen vacancies are formed on the ZnO support, which facilitates the dissociation of H₂O and the hydroxylation of ZnO species. Such promotion eventually favors the SMSI between Cu and ZnO and increases the catalytic activity for the methanol steam reforming reaction. In contrast, the addition of ethanol/water and 1-propanol/water during reduction leads to a physical blockage of the catalyst by alcohol molecules, poisoning the active Cu sites and limiting the migration of ZnO species.     

Solvation Properties of Aliphatic Alcohol–Water and Fluorinated Alcohol–Water Solutions for Amide Molecules Studied by IR and NMR Techniques

Solvation properties of aliphatic alcohol–water and fluorinated alcohol–water solutions were probed by amide molecules as solutes using infrared (IR) and ¹H and ¹³C NMR techniques. These include four alcohols: ethanol (EtOH), 2-propanol (2-PrOH), 2,2,2-trifluoroethanol (TFE), and 1,1,1,3,3,3-hexafluoro-2-propanol (HFIP) and three amides: N-methylformamide (NMF), N-methylacetamide (NMA) and N-methylpropionamide (NMP). The hydrogen bonds of the amide carbonyl oxygen with water are gradually weakened as the alcohol content increases. This decreases in the order of HFIP > TFE ≈ 2-PrOH > EtOH. In TFE– and HFIP–water solutions, the hydrogen bond between the amide amino hydrogen and water is also gradually broken with increasing x _A. This trend is more notable in the order of NMP > NMA > NMF. The hydrophobic moieties of the amide methyl and ethyl groups are solvated by the fluoroalkyl groups of fluorinated alcohols due to the hydrophobic interaction among them. Thus, the steric hindrance generated by the solvated alkyl group of amides promotes the breaking of the hydrogen bonds between amide and water.     

Semifluorinated chains at the air/water interface: studies of the interaction of a semifluorinated alkane with fluorinated alcohols in mixed langmuir monolayers

Mixtures of a semifluorinated alkane 1,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10-henicosafluorotriacontane (abbr. F10H20) and different alcohols were investigated at the air/water interface using surface pressure-area isotherms complemented with BAM images. In our studies, octadecanol and its fluorinated derivatives differing in the degree of fluorination were researched. To verify the influence of an iso branching of the fluorinated segment in an alcohol molecule, the properties of perfluorooctyldecanol and perfluoro-iso-nonyldecanol in mixtures with F10H20 were compared. From the isotherms datapoints, the excess of free energy of mixing (DeltaG(exc)) together with the interaction parameter (alpha) were calculated. On the basis of the additivity rule and BAM images, phase diagrams for all of the investigated systems were constructed. It occurs that F10H20 mixes with the fully hydrogenated alcohol, octadecanol, within the whole range of alcohol mole fractions, whereas it is completely immiscible with its perfluorinated analogue. Regarding the mixtures of F10H20 with semifluorinated alcohols, it turned out that these systems exhibit limited miscibility, i.e., are miscible at a low semifluorinated alcohol proportion, whereas upon increasing alcohol content, the systems start to demix. It may be concluded that the molecular packing in mixed monolayers is the key factor determining the miscibility of F10H20 of the investigated alcohols.     

The mechanism of photocatalytic reaction over Pt/TiO2: Production of H2 and aldehyde from gaseous alcohol and water

Two types of reaction mechanism were found to proceed in the photocatalytic reaction between various alcohols and water over Pt/TiO₂: the reaction of physisorbed alcohol with a hole and with the ?O11 produced by the hole from H₂O. The selectivity of these reactions depends strongly on the electron donor level of the absorbed alcohol species compared with that of H₂O.     

Syntheses of Vinyl Sulfoxide/Vinyl Acetate-Type Copolymers

The homopolymerization of a series of alkyl vinyl sulfoxides (CH₂[dbnd]CHSOR; R = CH₃ (MVSO), C₂H₅ (EVSO), t-C₄H₉ (BVSO)) and their copolymerization with vinyl acetate (VAc) with 2,2′-azobisisobutyronitrile (AIBN) as initiator at 60°C was attempted. MVSO was found to homopolymerize radically, but EVSO and BVSO were not. Poly-MVSO is soluble in chloroform, methanol, DMSO, and water, but insoluble in acetone and benzene. MVSO and EVSO were found to copolymerize with VAc, but BVSO was not. The copolymerization parameters obtained for both systems were as follows; r₁(MVSO) = 2.23, r₂ (VAc) = 0.09, and r₁(EVSO) = 3.40, r₂ (VAc) = 0.11, respectively. MVSO/vinyl alcohol (VA) copolymers were obtained through the saponification of MVSO/VAc copolymers by sodium hydroxide in methanol. The solubility of MVSO/VAc and of MVSO/VA copolymers toward various solvents was examined, and it was observed that the sulfoxide comonomer has a tendency to give amphiphilicit to poly(vinyl acetate) and poly(vinyl alcohol). The 24 mol% MVSO containing VAc copolymer is soluble in both benzene and water.