含分层损伤复合材料层合板的压缩强度研究

给出了基于一阶剪切变形理论的含分层损伤层合板有限元分析模型,将含分层损伤层合板在压缩载荷作用下的强度破坏分析和屈曲破坏分析统一起来,先区分其破坏形式,然后再进行具体破坏分析.在屈曲特性分析中考虑了铺层强度破坏引起的刚度折减的影响.数值结果表明, 该文给出的方法和结论对含分层损伤复合材料层合板的设计更具参考价值.     

具有分层损伤的不同加筋形式复合材料层合板的后屈曲性态研究

基于板的一阶剪切理论和V on-K arm an大挠度理论,分别推导了复合材料层合板和层合梁的几何非线性有限元列式,提出了含嵌入分层的复合材料加筋层合板在受压缩载荷作用下的后屈曲有限元分析方法,对在板厚方向具有不同分层位置的加筋板结构进行了有限元数值分析,研究了不同的加筋方式及筋的分布对具有分层损伤的复合材料加筋层合板的后屈曲性态的影响,所得结果对确定在压缩载荷作用下含损伤复合材料加筋层合板的剩余承载能力具有参考价值。     

Dynamic stability analysis of composite plates including delaminations using a higher order theory and transformation matrix approach

A refined higher order shear deformation theory is used to investigate the dynamic instability associated with composite plates with delamination that are subject to dynamic compressive loads. Both transverse shear and rotary inertia effects are taken into account. The theory is capable of modeling the independent displacement field above and below the delamination. All stress free boundary conditions at free surfaces as well as delamination interfaces are satisfied by this theory. The procedure is implemented using the finite element method. Delamination is modeled through the multi-point constraint approach using the transformation matrix technique. For validation purposes, the natural frequencies and the critical buckling loads are computed and compared with three-dimensional NASTRAN results and available experimental data. The effect of delamination on the critical buckling load and the first two instability regions is investigated for various loading conditions and plate thickness. As expected, the natural frequencies and the critical buckling load of the plates with delaminations decrease with increase in delamination length. Increase in delamination length also causes instability regions to be shifted to lower parametric resonance frequencies. The effect of edge delamination on the static and dynamic stability as well as of delamination growth is investigated.     

Coupled buckling and postbuckling analysis of active laminated piezoelectric composite plates

A theoretical framework for analyzing the pre- and postbuckling response of composite laminates and plates with piezoactuators and sensors is presented. The mechanics include nonlinear effects due to large rotations and stress stiffening, and are incorporated into a coupled mixed-field piezoelectric laminate theory. Using the previous mechanics, a nonlinear finite element method and an incremental-iterative solution are formulated for the analysis of nonlinear adaptive plate structures subject to in-plane electromechanical loading. A novel eight-node nonlinear plate finite element is also developed. Evaluation cases predict the buckling and postbuckling response of adaptive composite beams and plates with piezoelectric actuators and sensors. The case of piezoelectric buckling and postbuckling induced by the actuators is addressed and quantified. Finally, the possibility to actively mitigate the mechanical buckling and postbuckling response of adaptive piezocomposite plates is illustrated.     

含有分层损伤的复合材料加筋层合板的屈曲性态研究

基于Ｍｉｎｄｉｎ假定推导了考虑剪切的复合材料加筋层板的有限元列式,并在此基础上计算出筋间基板含嵌入分层以及筋与基板连接处含穿透分层的加筋层合板在受压缩载荷情况下的屈曲模式和临界力。本文所给出的有限元方法及结论对从事复合材料结构设计的工程人员具有参考价值。     

U型波纹管及相关结构环向屈曲的有限元分析(Ⅰ)--基本方程及环板的屈曲

U型波纹管是现代管道系统中最常见的一种位移补偿器 ,它由环板和具有正、负Gauss曲率的半圆环壳组成 ,在管道所传输的介质的压力作用下会发生屈曲。其中环向屈曲最为复杂 ,精确的理论分析非常困难 ,有限元分析也不多见。作者在分析前人工作的基础上 ,以圆环壳段为单元 (特定的旋转壳段单元 ,能自动退化成环板单元 ) ,限于弹性范围和线性化特征值问题 ,对介质压力作用下U型波纹管及其相关结构 (圆环板、圆环壳、半圆环壳 )的环向屈曲问题进行了分析。考虑了结构屈曲前的弯曲 ,计及压力的二次势能 ,导出的应力刚度矩阵和载荷刚度矩阵是非对称的。全部工作分为三部分 :(Ⅰ )基本方程 ,环板的屈曲 ;(Ⅱ )圆环壳、半圆环壳的屈曲 ;(Ⅲ )波纹管平面失稳的机理。本文为第一部分 ,除推导公式外 ,对不同边界和不同内外径之比的环板在径向均匀压力作用下的环向屈曲进行了计算 (轴对称的径向屈曲作为特例得到 ) ,给出了前屈曲应力分布、临界载荷及相应的屈曲模态 ,并将临界压力的值与前人基于vonK偄ｒｍ偄ｎ大挠度板的精确解进行了比较 ,吻合良好。     

关于结构限制失稳的研究进展

限制失稳是指构件失稳时其屈曲变形不能自由发展而受到某种限制性约束的失稳,有时又称单向失稳、接触失稳、约束失稳.这类问题在工业中有大量应用,也是固体力学中的一个经典问题.最常见的实例如应用于地下管道、隧道、压力容器、核反应堆安全壳中的薄衬壳,当薄衬壳发生屈曲时,由于受到外壁的约束,其屈曲行为和一般的壳体屈曲行为不同,这就需要我们发展新的研究方法.另外如受钻井套管横向约束的钻柱的屈曲,复合材料的分层屈曲,电子元器件中的镀层屈曲等也属于限制失稳的范畴.限制失稳问题因其涉及接触问题、单向屈曲、非保守问题等而显得十分复杂,一直没有得到很好的解决.从近年来文献看,限制失稳的研究多集中在压杆、圆环的研究,板、壳的研究相对较少.本文首先简单介绍了限制失稳的一般概念,指出存在的限制约束对结构屈曲特性的影响.然后分别介绍了对于杆、环、板、壳的受限制失稳的研究进展.最后提出了需要进一步深入研究的问题.图11参75      

Buckling analysis of laminated composite plates containing delaminations using the enhanced assumed strain solid element

This study investigates buckling behaviors of laminated composite structures with a delamination using the enhanced assumed strain (EAS) solid element. The EAS three-dimensional finite element (FE) formulation described in this paper, in comparison with the conventional approaches, is more attractive not only because it shows better accuracy but also it converges faster, especially for distorted element shapes. The developed FE model is used for studying cross-ply or angle-ply laminates containing an embedded delamination as well as through-the-width delamination. The numerical results obtained are in good agreement with those reported by other investigators. In particular, new results reported in this paper are focused on the significant effects of the local buckling for various parameters, such as size of delamination, aspect ratio, width-to-thickness ratio, stacking sequences, and location of delamination and multiple delaminations.     

Behaviour of thick composite tubes considering of delamination

The present paper deals with plane finite element analysis of thick composite tubes. Thick composite tubes are commonly used in marine industry and in deep-water offshore applications. Two kinds of interlaminar delamination type defect in a thick walled cylinder subjected to external pressure were confronted; an annular or ring like delamination and a strip delamination. Two finite element models were developed to predict the strain energy release rate at the delamination fronts. In these models the effects of the processing history of the composite material in the form of a uniform thermal load were also included to simulate the state of the residual stress in the composite. The considered defects are studied by means of the effect of buckling, investigating the annular and the strip delamination buckling, and the subsequent loss of load carrying capacity of the delaminated region.     

复合材料层合板壳非线性力学的研究进展

复合材料层合板壳是由多种组分材料组合而成.与单一材料的板壳结构相比,它无明确的材料主方向,各层间材料间断和不连续,具有明显的几何非线性和材料非线性等新的特点.其失效模式也远比单一材料的情况复杂,具有如基体开裂、脱胶、分层、分层裂纹偏转、多分层以及分层传播等多种模式.各国学者基于不同的考虑,提出了多种方法研究复合材料层合板壳的失效.首先,在简要介绍了层合板壳线性力学基本理论的基础上,重点回顾了层合板壳结构非线性力学几种基本理论发展的过程,主要阐述了经典大挠度非线性理论、一阶剪切变形理论、高阶剪切变形理论、锯齿理论、广义分层理论的理论体系及基本公式,并对几种理论之间的联系和差异进行了总结;其次,介绍了当前层合结构非线性领域的研究进展,综述了典型复合材料板壳结构的失效机理及优化设计、复合材料板壳结构在复杂环境下的破坏机理、复合材料板壳结构的物理非线性、含脱层纤维增强复合材料板壳结构的破坏机理等各研究热点的最新研究成果;最后,对该领域未来的研究方向进行了展望.     

Delamination buckling in composite laminates with interlaminar defects

Analyzed are the delamination buckling and growth in compressively loaded layered composite plates. Delamination is assumed to spread from an initial interlaminar defect. The method involves an analytical approach using fracture mechanics and a numerical analysis assuming that the adhesive layers can be modelled by elastic springs with finite tensile strength. Analytical and numerical results are compared and discussed.     

受弯脱层层板后屈曲有限元分析

脱层是复合材料层板结构中主要的缺陷形式之一。当脱层层板受到压力载荷的作用会造成脱层的局部屈曲和扩展,从而使结构的强度和刚度大为降低。含脱层层板的弯曲问题包含了脱层的压缩问题,却比压缩问题更加复杂。本文对含穿透脱层层板在纯弯载荷作用下的后屈曲问题进行了基于一阶剪切层板理论的几何非线性有限元分析,运用虚裂纹闭合技术求解了纯弯载荷作用下的脱层尖端的能量释放率各型分量,并用脱层扩展判据求解了脱层起始扩展载荷。     

Stability and limit states of elastoplastic spherical shells under static and dynamic loading

The problem of elastoplastic deformation, buckling, and postcritical behavior of spherical shells is solved using a finite element method and a cross-type explicit scheme of time integration. Stability problems for hemispherical shells under external pressure and compression between rigid plates are considered. The influence of holes and boundary conditions on shell deformation is investigated. It is shown that the calculation results are in good agreement with experimental data.     

Buckling of delaminated bi-layer beam-columns

An improved analytical model is presented to analyze the delamination buckling of a bi-layer beam-column with a through-the-width delamination. Both the transverse shear deformation and local delamination tip deformations are taken into consideration, and two delaminated sub-layers as well as two substrates in the intact (un-delaminated) regions are modeled as individual Timoshenko beams. A deformable interface is introduced to establish the continuity condition between the two substrates in the intact regions. Consequently, a flexible joint is formed at the delamination tip, and it is different from the conventional rigid joint given in most of studies in the literature, in which the local delamination tip deformations are completely ignored. In contrast to the local delamination buckling in our previous study (Qiao et al., 2010), the present model accounts for the global deformations of the intact region in the delaminated composite beam-column, thus capable of capturing the buckling mode shape transitions from the global, to global–local coexistent, and to local buckling for asymmetric delamination as the interface delamination increases. Good agreement of the present analytical solutions with the full 2-D elastic finite element analysis demonstrates the local deformation effects around the delamination tip and verifies the accuracy of the present model. Parametric studies are conducted to investigate the effects of loading eccentricity, delaminated sub-layer thickness ratio, and interface compliance on the critical buckling load for the delaminated composite beam-column. Transitions of buckling modes from the global to local delamination buckling are also disclosed as the thickness of one sub-layer reduces from the thick sub-layer to a thin film. The developed delamination buckling solution facilitates the design analysis and optimization of laminated composite structures, and it can be used with confidence in buckling analysis of delaminated composite structures.     

Postbuckling behaviors of open section composite struts with edge delamination using a layerwise theory

We investigate the mechanical stability of L-section and T-section composite struts with single edge delamination. We propose a solution procedure based on a layerwise theory and the first order shear deformation theory by taking into consideration of the von Karman geometrical nonlinearity. We derive the nonlinear equilibrium equations according to the minimum total potential energy principle, and solve them using Rayleigh–Ritz method and Newton–Raphson method. In modeling the delaminated L-section and T-section struts, we divide the structures into regions, and exert continuity conditions between different regions. The proposed model is capable of analyzing both local buckling of the base laminate and sublaminate as well as the global buckling of the whole structure. We present numerical results to provide an insight into effects of size of delamination on buckling mode and post-buckling behaviors of the struts. We perform the three-dimensional finite element analysis using the ABAQUS commercial software. The results show a very good agreement with those obtained by the analytical method. The results indicate that the presence of delaminations not only reduces the load-carrying capacity of open section struts remarkably, but also plays a pivotal role in the critical buckling load and buckling mode shape of the struts.     

Iterative method for large deflection nonlinear problem of laminated composite shallow shells and plates

ＩｎｔｒｏｄｕｃｔｉｏｎＡｓｃｏｍｐｏｓｉｔｅｓａｒｅｅｘｔｅｎｓｉｖｅｌｙａｐｐｌｉｅｄｉｎｍｏｄｅｒｎｅｎｇｉｎｅｒｉｎｇｓｔｒｕｃｔｕｒｅｓａｎｄｍｅｃｈａｎｉｃｓｏｆｃｏｍｐｌｅｘｍａｔｅｒｉａｌｓｈａｓｂｅｎｈｉｇｈｌｙａｄｖａｎｃｅｄ,ｉ...     

轴向应力波作用下圆柱壳塑性轴对称动力屈曲

运用有限元特征值分析方法对应力波作用下圆柱壳塑性轴对称动力失稳问题进行了研究。基于应力波理论和相邻平衡准则导出了圆柱壳轴对称动力失稳时的特征方程,在分析中同时考虑了应力波效应及横向惯性效应,把圆柱壳塑性动力失稳问题归结为特征值问题。通过引入圆柱壳动力失稳时的波前约束条件实现了此类问题的有限元特征值解法。计算结果揭示了圆柱壳塑性轴对称动力屈曲变形发展的机理,以及轴向应力波和屈曲变形的相互作用规律。     

轴向应力波作用下圆柱壳弹性轴对称动力失稳有限元特征值分析

本文运用有限元特征值分析方法对应力波作用下圆柱壳弹性轴对称动力失稳问题进行了研究。基于应力波理论和相邻平衡准则导出了圆柱壳轴对称动力失稳时的有限元特征方程,在此方程中考虑了应力波效应及横向惯性效应,把圆柱壳弹性动力失稳问题归结为特征值问题。通过引入圆柱壳动力失稳时的波前约束条件实现了此类问题的有限元特征值解法。计算结果揭示了圆柱壳弹性轴对称动力屈曲变形发展的机理,以及轴向应力波和屈曲变形的相互作用规律。     

Nonlinear shell-type to beam-type fea simplifications for composite frp poles

This paper presents a semi-analytical finite element analysis of pole-type structures with circular hollow cross-section. Based on the principle of stationary potential energy and Novozhilov’s derivation of nonlinear strains, the formulations for the geometric nonlinear analysis of general shells are derived. The nonlinear shell-type analysis is then manipulated and simplified gradually into a beam-type analysis with special emphasis given on the relationships of shell-type to beam-type and nonlinear to linear analyses. Based on the theory of general shells and the finite element method, the approach presented herein is employed to analyze the ovalization of the cross-section, large displacements, the P-Δ effect as well as the overall buckling of pole-type structures. Illustrative examples are presented to demonstrate the applicability and the efficiency of the present technique to the large deformation of fiber-reinforced polymer composite poles accompanied with comparisons employing commercial finite element codes.     

Study on failure process of delaminated stiffened composite plates under compression

Failure behavior of the delaminated stiffened composite plates under compression is studied by the finite element method, based on a Global-Local variational model. A virtual crack closure technique and a self-adaptive grid moving scheme are proposed to predict the delamination growth process. The contact effect along the delamination front is considered. The numerical results show that the influences of the distribution and location of the stiffeners, the configuration and size of the delamination, the boundary condition and the contact upon the failure behavior of the plates are significant. The project supported by the National Natural Science Foundation of China (59975014)