Bis-p-xylyl[26]crown-6/pyridinium ion recognition: one-pot synthesis of molecular shuttles

Simple one-pot syntheses allow the preparation of [2]rotaxane-based degenerate molecular shuttles featuring the recognition of pyridinium ions by BPX26C6 macrocycles. Because of the weak interactions between the BPX26C6 and pyridinium units in the [2]rotaxanes in CD₃COCD₃, the rates of shuttling of the BPX26C6 moieties between the pyridinium stations are rapid, relative to those of DB24C8-based shuttles, on the NMR spectroscopic time scale at ambient temperature.     

Using oppositely charged ions to operate a three-station [2]rotaxane in two different switching modes

A [2]rotaxane undergoes switching of its bis-p-xylyl-[26]crown-6 (BPX26C6) component away from its guanidinium station toward its 2,2'-bipyridyl and carbamate stations upon the addition and removal of Zn(2+) and PO(4)(3-) ions, respectively.     

Parking and restarting a molecular shuttle in situ

Herein we report an easy-to-synthesize [2]rotaxane, which incorporates two ionic monopyridinium stations and one 2,2'-bipyridine station as the shaft of the dumbbell-shaped component and a bis-p-xylyl[26]crown-6 (BPX26C6) unit as the macrocyclic component. In this molecular shuttle, the BPX26C6 unit can be docked selectively on either the central 2,2'-bipyridine station or one of the two terminal pyridinium stations, and subsequently, returned to its shuttling molecular motion through the in situ addition of simple reagents (acid/base or metal ion/metal-ion-complexing ligand pairs).     

One-pot synthesis of donor-acceptor [2]rotaxanes based on cryptand-paraquat recognition motif

Two novel cryptand-based [2]rotaxanes were synthesized by a facile one-pot reaction from three neutral precursors: easily accessible cryptand host 1 and commercially available 4,4'-bipyridine and 3,5-di-tert-butylbenzyl bromide. Their structures were confirmed by (1)H NMR, 2D NMR, HRMS and X-ray analysis. Moreover, two [2]pseudorotaxanes based on the same cryptand hosts and dibenzyl viologen guest 3 were also demonstrated both in solution and in the solid state, which are different from previously reported [3]pseudorotaxane-like complexes formed by dimethyl viologen guest 2 and the cryptands.     

Structure and Two-dimensional Correlation Infrared Spectroscopy Study of a New One-dimensional Chain Compound:(4,4''-Hbpy)3[NaMo8O26] (4,4''-bpy)2(H2O)4 (bpy = Bipydine)

A novel compound, (4,4'-Hbpy)3[NaMo8O26](4,4'-bpy)2(H2O)4 1 (bpy = bipydine),was synthesized by the hydrothermal method. Single-crystal X-ray diffraction shows that compound 1 belongs to the monoclinic system, space group C2/m with a = 19.1921(5), b = 18.6931(6), c = 9.3821 (3) (A), β = 104.8020(11)°, V = 3254.22(17) (A)3, C50H51Mo8N10NaO30, Mr = 2062.52, Z = 2,F(000) = 2016,μ = 1.591 mm- 1 and Dc = 2.105 g/cm3. The final R = 0.0283 and wR = 0.0912 for 3118 observed reflections (I ＞ 2σ(Ⅰ)). Compound 1 contains the β-[Mo8O26]4- anion, sodium ion, 4,4'-bpy and lattice crystalline water molecules. The β-[Mo8O26] units link the sodium ion to form a chain structure. The infinitechains of [Na(Mo8O26)]3- blocks are surrounded by protonized 4,4'-bpy cations,4,4'-bpy and lattice crystalline water molecules. The 2D-IR correlation spectroscopy study indicates that the stretching vibrations of Mo=O occur more preferentially due to the thermal effect. The TGA analysis shows that compound 1 has high thermal stability.     

Two [2]pseudorotaxane-like complexes and their corresponding [2]rotaxanes stabilized via interactions on opposite ends of the same macrocycle

A multiple-use macrocycle recognizes dibenzylammonium ions and 2,6-lutidine derivatives, each in a [2]pseudorotaxane-like manner, through interactions with its diethylene glycol (hydrogen bonding) and 2,6-pyridinedicarboxamide (Pd²⁺ chelation) spacers, respectively. We characterized these complexes in the solid state (X-ray crystallography) and in solution (¹H NMR spectroscopy). The synthesis of two corresponding [2]rotaxanes confirmed that these recognition systems possess [2]pseudorotaxane geometries in solution.     

A series of new organic-inorganic molybdenum arsenate complexes based on [(ZnO6)(As3O3)2Mo6O18]4- and [HxAs2Mo6O26](6-x)- clusters as SBUs

By synthesizing the novel molybdenum arsenate complexes, we have obtained eight new structures, namely, (4,4'-bipy)[Zn(4,4'-bipy)2(H2O)2]2[(ZnO6)(AsIII3O3)2Mo6O18].7H2O, 1, [Zn(phen)2(H2O)]2[(ZnO6)(AsIII3O3)2Mo6O18].4H2O, 2, [Zn(2,2'-bipy)2(H2O)]2[(ZnO6)(AsIII3O3)2Mo6O18].4H2O, 3, [Zn(H4,4'-bipy)2(H2O)4][(ZnO6)(AsIII3O3)2Mo6O18].8H2O, 4, (H24,4'-bipy)[CuI(4,4'-bipy)]2[H2AsV2Mo6O26].H2O, 5, (H24,4'-bipy)3[AsV2Mo6O26].4H2O, 6, (H24,4'-bipy)3[AsV2Mo6O26(H2O)].4H2O, 7, and (H24,4'-bipy)2.5(H3O)[AsV2Mo6O26(H2O)].1.25H2O, 8 (4,4'-bipy = 4,4'-bipyridine, 2,2'-bipy = 2,2'-bipyridine, phen = 1,10-phenanthroline). These structures were determined by single-crystal X-ray diffraction analysis and were further characterized by elemental analysis, IR, XPS spectroscopy, and TG analysis. The structure of 1 is constructed from two-dimensional square gridlike sheets linked by the polyanions [(ZnO6)(AsIII3O3)2Mo6O18]4- via hydrogen-bonding interactions to form a three-dimensional supramolecular framework with two types of channels. Compounds 2 and 3 display similar bisupported structures. Compound 4 features a three-dimensional supramolecular architecture. Compound 5 possesses a 1D infinite ladderlike ribbon. Compounds 6-8 are discrete structures exhibiting three isomeric forms of [HxAs2Mo6O26](6-x)-. Furthermore, compound 8 represents a new isomer B'-[As2Mo6O26(H2O)]6-. In addition, the fluorescent properties of compounds 1-3 are reported.     

Structure and Two-dimensional Correlation Infrared Spectroscopy Study of a New One-dimensional Chain Compound: (4,4’-Hbpy)_3[NaMo_8O_(26)](4,4’- bpy)_2(H_2O)_4 (bpy = Bipydine)

1 INTRODUCTION Owing to their unusual topological properties and economically important applications in many fields, such as catalysis, biology, materials science and mag- netochemistry[1～3], polyoxometalates (POMs) have aroused particular interest for a long time[4～6]. But the investigation in their capability and application are relatively less carried on. Even though some POMs have been put into practice, the mechanism of the function of POMs remains incompletely understood. Thus,…     

Hydrothermal Assembly and Structural Characterization of an Octamolybdate Supported Copper(Ⅰ) Tetramer:[Cu2(1,10-phen)2(4,4'-bpy)]2[Mo8O26]·4H2O

A hydrothermal reaction of copper acetate with ammonium molybdate, 4,4'-bpy (4,4'-bipyridine) and 1,10-phen (1,10-phenanthroline) led to the formation of brown crystals of [Cu2(1,10-phen)2(4,4'-bpy)]2 [Mo8O26]@4H2O 1. Single-crystal X-ray analysis has revealed that 1 C68H56N12O30Cu4Mo8 crystallizes in the triclinic system, space group P ī with a = 11.270(3), b = 13.113(6), c = 13.906(3)A, α = 103.33(4),α = 98.54(2),β= 101.29(2)°, V = 1920.1(1)A3, Mr = 2542.9(3), Z = 1, Dc = 2.199 g/cm3, μ= 2.435 mm-1, F(000)= 1240, the final R = 0.0445, wR = 0.1082 and S = 1.021 for 5052 observed reflections with I>σ2(I).It consists of copper Ⅰ tetramer units and α-[Mo8O26]4- anions, which are further attached into a three-dimensional framework through hydrogen bonding and π-π stacking interactions.     

Hydrothermal Assembly and Structural Characterization of an Octamolybdate Supported Copper (Ⅰ) Tetramer: [Cu_2(1,10-phen)_2(4,4′-bpy)]_2[Mo_8O_(26)]·4H_2O

1 INTRODUCTION The recent expansion of the field of heteropolyoxometalate chemistry derives from their vast topological structures and applicable physical properties[1～5]. One of the crucial strategies for the molecular design of solid materials is how to apply hydrothermal synthesis method to introduce some interesting transition metal coordinated fragments into the covalent backbones of solid materials. Studies have been focused on organic-inorganic hybrid materials containing one kin…     

A new cryptand: synthesis and complexation with paraquat

[formula: see text] Inspired by folded, nonpseudorotaxane complexes of bis(m-phenylene)-32-crown-10 systems, we synthesized a new bicyclic crown ether containing two 1,3,5-phenylene units linked by three tetra(ethyleneoxy) units. The new cryptand forms a "pseudorotaxane-like" inclusion complex with N,N'-dimethyl-4,4'-bipyridinium bis(hexafluorophosphate) with association constant Ka = 6.1 x 10(4) M-1, 100-fold greater than that of an analogous simple crown ether.     

Efficient potassium-ion-templated synthesis and controlled destruction of [2]rotaxanes based on cascade complexes

The triptycene-based macrotricyclic host can form pseudorotaxane-like cascade complexes with anthraquinone and its tetra-azide terminally functionalized derivative in the presence of potassium ions, which subsequently resulted in the synthesis of three novel potassium-ion-templated [2]rotaxanes 10-12 in high yields by the "threading followed by stoppering" approach. Since the potassium ions act not only as templates during the stoppering reactions but also as nonslipping chocks to shrink the inner diameter of the wheel cavity, the deslipping behaviors of the [2]rotaxanes with different triazole stoppers by peeling off the potassium ions with 18-crown-6 were further investigated. The results show that rotaxanes 10 and 11 can be destroyed, but under the same conditions the dumbbell and ring components of rotaxane 12 remain interlocked.     

Mo16O53F2]12-: a new polyoxofluoromolybdate anion

Single crystals of a new beta-octamolybdate salt containing protonated 1,4-diazabicyclo[2.2.2]octane cations were prepared under mild hydrothermal conditions. This compound, [C6H13N2]2[C6H14N2][Mo8O26], was then used as a starting material in the synthesis of [C6H13N2]6[Mo16O53F2].4H2O, which contains previously unreported [Mo16O53F2]12- anions. The structure-directing properties of gamma-[Mo8O26]4-, a likely intermediate in this pH-dependent transformation, are responsible for the site selection of the fluoride incorporation. [Mo16O53F2]12-, the largest reported polyoxofluoromolybdate cluster, expands upon the limited number of such anions in the literature. The structures of both compounds were determined using single-crystal X-ray diffraction.     

Self-assembly and dynamics of [2]- and [3]rotaxanes with a dinuclear macrocycle containing reversible Os-N coordinate bonds

With a dinuclear macrocycle 2 that contains weak reversible OsVI-N coordinate bonds, self-assembly and equilibrium dynamics of [2]- and [3]rotaxanes have been investigated. When the macrocycle 2 was mixed together with threads 4a-e, which all contain an adipamide station but different sizes of end groups, [2]pseudorotaxane- and rotaxane-like complexes were immediately formed with large association constants of >7 x 103M(-1) in CDCl3 at 298 K. Exchange dynamics, explored by 2D-EXSY experiments, suggest that assembly and disassembly of complexes occur through two distinct pathways, slipping or clipping, and this depends on the size of the end groups. The slipping pathway is predominant with smaller end groups that give pseudorotaxane-like complexes, while the clipping pathway is observed with larger end groups that yield rotaxane-like complexes. Under the same conditions, exchange barriers (deltaG++) were 14.3 kcalmol(-1) for 4a and 16.7 kcalmol(-1) for 4d, and indicate that the slipping process is at least one order of magnitude faster than the clipping process. Using threads 13a and 13b that contain two adipamide groups, more complicated systems have been investigated in which [2]rotaxane, [3]rotaxane, and free components are in equilibrium. Concentration- and temperature-dependent 1H NMR spectroscopic studies allowed the identification of all possible elements and the determination of their relative distributions in solution. For example, the relative distribution of the free components, [2]rotaxane, and [3]rotaxane are 30, 45, and 25 %, respectively, in a mixture of 2 (2mM) and 13a (2mM) in CDCl3 at 10 degrees C. However, [3]rotaxane exists nearly quantitatively in a mixture of 2 (4 mM) and 13 a (2 mM) in CDCl3 at a low temperature - 10 degrees C.     

New 13-vertex metallacarborane sandwich compounds; synthetic and structural studies

Reduction of 1,12-closo-C2B10H12 followed by reaction with the appropriate metal halide and metathesis with either [K(18-crown-6)]Br or [BTMA]Cl ([BTMA] = [C6H5CH2N(CH3)3]+) affords isolable salts of the supraicosahedral metallacarborane sandwich anions [4,4-M-(1,10-closo-C2B10H12)2]n- in moderate to good yield. Compounds prepared are [BTMA][4,4-Co-(1,10-closo-C2B10H12)2] ( 1), [K(18-crown-6)][4,4-Co-(1,10-closo-C2B10H12)2] ( 2), [K(18-crown-6)]2[4,4-Ni-(1,10-closo-C2B10H12)2] ( 3), [K(18-crown-6)]2[4,4-Fe-(1,10-closo-C2B10H12)2] ( 4), [BTMA]2[4,4-Fe-(1,10-closo-C2B10H12)2] ( 5) and [K(18-crown-6)]2[4,4-Ti-(1,10-closo-C2B10H12)2] ( 6). Oxidation of the iron(II) species 4 and 5 with FeCl3 in THF generates the iron(III) analogues [K(18-crown-6)][4,4-Fe-(1,10-closo-C2B10H12)2] ( 7) and [BTMA][4,4-Fe-(1,10-closo-C2B10H12)2] ( 8), respectively. All diamagnetic compounds were characterised spectroscopically and the structures of 1, 3, 4, 6, 7 and 8 were established by single crystal X-ray diffraction. All anions have the anticipated cluster structures with two docosahedral 13-vertex cages joined at the central metal atom (the common degree-six vertex 4). Carbon atoms occupy the degree-four vertex 1 and the degree-five vertex 10. 11B NMR spectroscopy suggests the anions have, on the NMR timescale, C2h symmetry in solution at room temperature, consistent with free rotation, or at least substantial libration, of cage units about the long molecular axis. In the solid state the relative conformations of the two cages may be rationalised by simple bonding arguments, the single exception being the conformation of 4, in which both cages are subject to directional B-H...K+ interactions to the [K(18-crown-6)]+ counterion. The salts 3, 6 and 7 also show B-H...K+ interactions but involving one cage only.     

Implementation of comprehensive two-dimensional gas chromatography–time-of-flight mass spectrometry for the simultaneous determination of halogenated contaminants and polycyclic aromatic hydrocarbons in fish

In the presented study, comprehensive two-dimensional gas chromatography coupled to time-of-flight mass spectrometry (GC?×?GC-TOFMS) was shown to be a powerful tool for the simultaneous determination of various groups of contaminants including 18 polychlorinated biphenyls (PCBs), seven polybrominated diphenyl ethers (PBDEs), and 16 polycyclic aromatic hydrocarbons (PAHs). Since different groups of analytes (traditionally analyzed separately) were included into one instrumental method, significant time savings were achieved. Following the development of an integrated sample preparation procedure for an effective and rapid isolation of several groups of contaminants from fish tissue, the GC?×?GC-TOFMS instrumental method was optimized to obtain the best chromatographic resolution and low quantification limits (LOQs) of all target analytes in a complex mixture. Using large-volume programmable temperature vaporization, the following LOQs were achieved-PCBs, 0.01-0.25 μg/kg; PBDEs, 0.025-5 μg/kg; PAHs 0.025-0.5 μg/kg. Furthermore, several capillary column combinations (BPX5, BPX50, and Rxi-17Sil-ms in the first dimension and BPX5, BPX50, Rt-LC35, and HT8 in the second dimension) were tested during the experiments, and the optimal separation of all target analytes even of critical groups of PAHs (group (a): benz[a]anthracene, cyclopenta[cd]pyrene and chrysene; group (b): benzo[b]fluoranthene, benzo[j]fluoranthene and benzo[k]fluoranthene; group (c): dibenz[ah]anthracene, indeno[1,2,3-cd]pyrene and benzo[ghi]perylene) was observed on BPX5?×?BPX50 column setup. Moreover, since the determination of target analytes was performed using TOFMS detector, further identification of other non-target compounds in real life samples was also feasible.     

Insertion reactions into Pd[bond]O and Pd[bond]N bonds: preparation of alkoxycarbonyl,carbonato, carbamato,thiocarbamate, and thioureide complexes of palladium(II)

Mononuclear palladium hydroxo complexes of the type [Pd(N[bond]N)(C(6)F(5))(OH)] [(N[bond]N = 2,2'-bipyridine (bipy), 4,4'-dimethyl-2,2'-bipyridine (Me(2)bipy), 1,10-phenanthroline (phen), or N,N,N',N'-tetramethylethylenediamine (tmeda)] have been prepared by reaction of [Pd(N[bond]N)(C(6)F(5))(acetone)]ClO(4) with KOH in methanol. These hydroxo complexes react, in methanol, with CO (1 atm, room temperature) to yield the corresponding methoxycarbonyl complexes [Pd(N[bond]N)(C(6)F(5))(CO(2)Me)]. Similar alkoxycarbonyl complexes [Pd(N[bond]N)(C(6)F(5))(CO(2)R)] (N[bond]N = bis(3,5-dimethylpyrazol-1-yl)methane); R = Me, Et, or (i)Pr) are obtained when [Pd(N[bond]N)(C(6)F(5))Cl] is treated with KOH in the corresponding alcohol ROH and CO is bubbled through the solution. The reactions of [Pd(N[bond]N)(C(6)F(5))(OH)] (N[bond]N = bipy or Me(2)bipy) with CO(2), in tetrahydrofuran, lead to the formation of the binuclear carbonate complexes [(N[bond]N)(C(6)F(5))Pd(mu-eta(2)-CO(3))Pd(C(6)F(5))(N[bond]N)]. Complexes [Pd(N[bond]N)(C(6)F(5))(OH)] react in alcohol with PhNCS to yield the corresponding N-phenyl-O-alkylthiocarbamate complexes [Pd(N[bond]N)(C(6)F(5))[SC(OR)NPh]]. Similarly, the reaction of [Pd(bipy)(C(6)F(5))(OH)] with PhNCO in methanol gives the N-phenyl-O-methylcarbamate complex [Pd(bipy)(C(6)F(5))[NPhC(O)OR]]. The reactions of [(N[bond]N)Pd(C(6)F(5))(OH)] with PhNCS in the presence of Et(2)NH yield the corresponding thioureidometal complexes [Pd(N[bond]N)(C(6)F(5))[NPhCSNR(2)]]. The crystal structures of [Pd(tmeda)(C(6)F(5))(CO(2)Me)], [Pd(2)(Me(2)bipy)(2)(C(6)F(5))(2)(mu-eta(2)-CO(3))].2CH(2)Cl(2), and [Pd(tmeda)(C(6)F(5))[SC(OMe)NPh]] have been determined.     

Syntheses and characterizations of palladium-based molecular triangle/square compounds and hybrid composites with polyoxometalates

Syntheses and characterizations of a Pd-based molecular triangle and square and hybrid composites with polyoxometalates are examined. The equilibrium between the Pd-based molecular triangle [(en*)Pd(4,4'-bpy)]3(NO3)6 and square [(en*)Pd(4,4'-bpy)]4(NO3)8 largely depends on the solvents, and both compounds have successfully been isolated: [(en*)Pd(4,4'-bpy)]3(NO3)6.3.5DMSO, monoclinic Cc (No. 9), a = 19.8210(2) A, b = 34.3667(5) A, c = 27.5484(4) A, beta = 89.9420(10) degrees , V = 18765.5(4) A3; [(en*)Pd(4,4'-bpy)]4(NO3)8, monoclinic C2/c (No. 15), a = 45.6921(16) A, b = 8.7721(8) A, c = 36.719(3) A, beta = 126.509(2) degrees , V = 11829.4(14) A3. The reactions of the Pd-based molecular triangle/square with [W6O19]2-, [W10O32]4-, and [alpha-SiW12O40]4- form [[(en*)Pd(4,4'-bpy)]4[ supersetW6O19]][W6O19]3, [[(en*)Pd(4,4'-bpy)]4[ supersetW6O19]](NO3)6, [[(en*)Pd(4,4'-bpy)]4[ supersetW10O32]][W10O32], [(en*)Pd(4,4'-bpy)]4[W10O32]2, and [(en*)Pd(4,4'-bpy)]4[alpha-SiW12O40]2. The molecular square does not encapsulate the largest [alpha-SiW12O40]4-, but it does encapsulate [W6O19]2- and [W10O32]4-. The isolation of [W6O19]2- and [alpha-SiW12O40]4- from the mixture by use of the molecular square is possible by utilizing the quite different solubility of [[(en*)Pd(4,4'-bpy)]4[ supersetW6O19]](NO3)6 and [(en*)Pd(4,4'-bpy)]4[alpha-SiW12O40]2 formed in DMSO. The size-selective encapsulation property of supramolecules may open the new way to rationalize isolation methods of the useful polyoxometalates.     

Ligand influences of the structures of molybdenum oxide networks

The influence of organonitrogen ligands on the network structure of molybdenum oxides was examined by preparing three new molybdenum oxide phases [MoO3(4,4'-bpy)0.5] (MOXI-8), [HxMoO3(4,4'-bpy)0.5] (MOXI-9), and [MoO3(triazole)0.5] (MOXI-32). The structure of [MoO3(4,4'-bpy)0.5) consists of layers of corner-sharing MoO5N octahedra, buttressed by bridging 4,4'-bipyridyl ligands into a three-dimensional covalently bonded organic-inorganic composite material. Partial reduction of [MoO3(4,4'-bpy)0.5] yields the mixed-valence material [HxMoO3(4,4'-bpy)0.5] (x approximately 0.5). The most apparent structural change upon reduction is found in the Mo-ligand bond lengths of the MoO5N octahedra, which exhibit the usual (2 + 2 + 2) pattern in [MoO3(4,4'-bpy)0.5] and a more regular (5 + 1) pattern in [HxMoO3(4,4'-bpy)0.5]. Substitution of triazole for 4,4'-bipyridine yields [MoO3(triazole)0.5], which retains the layer motif of corner-sharing MoO5N octahedra but with distinct sinusoidal ruffling in contrast to planar layers of [MoO3(4,4'-bpy)0.5] and [HxMoO3(4,4'-bpy)0.5]. The folding reflects the ligand constraints imposed by the triazole ligand that bridges adjacent Mo sites within a layer. MOXI-8, C5H4NMoO3: monoclinic P2(1)/c, a = 7.5727(6) A, b = 7.3675(7) A, c = 22.433(3) A, beta = 90.396(8) degrees, Z = 8. MOXI-9, C5H4.5NMoO3: monoclinic I2/m, a = 5.2644(4) A, b = 5.2642(4) A, c = 22.730(2) A, beta = 90.035(1) degrees, Z = 4. MOXI-32, C2H3N3Mo2O6: orthorhombic Pbcm, a = 3.9289(5) A, b = 13.850(2) A, c = 13.366(2) A, Z = 4.     

Mo(W)/Cu/S cluster-based supramolecular arrays assembled from preformed clusters [Et4N]4[WS4Cu4I6] and [(n-Bu)4N]2[MoOS3Cu3X3] (X = I, SCN) with flexible ditopic ligands

In our working toward the rational design and synthesis of cluster-based supramolecular architectures, a set of new [WS4Cu4]- or [MoOS3Cu3]-based supramolecular assemblies have been prepared from reactions of preformed cluster compounds [Et4N]4[WS4Cu4I6] (1) and [(n-Bu)4N]2[MoOS3Cu3X3] (2, X = I; 3, X = SCN) with flexible ditopic ligands such as dipyridylsulfide (dps), dipyridyl disulfide (dpds), and their combinations with dicyanamide (dca) anion and 4,4'-bipy. The cluster precursor 1 reacted with dps or dpds and sodium dicyanamide (dca) in MeCN to produce [WS4Cu4I2(dps)3].2MeCN (4.2MeCN) and [WS4Cu4(dca)2(dpds)2].Et2O.2MeCN (5.Et2O.2MeCN), respectively. On the other hand, treatment of 2 with dpds in DMF/MeCN afforded [MoOS3Cu3I(dpds)2].0.5DMF.2(MeCN)0.5 (6.0.5DMF.2(MeCN)0.5) while reaction of 3 with sodium dicyanamide (dca) and 4,4'-bipy in DMF/MeCN gave rise to [MoOS3Cu3(dca)(4,4'-bipy)1.5].DMF.MeCN (7.DMF.MeCN). Compounds 4.2MeCN, 5.Et2O.2MeCN, 6.0.5DMF.2(MeCN)0.5, and 7.DMF.MeCN have been characterized by elemental analysis, IR spectroscopy, and single-crystal X-ray crystallography. Compound 4 contains a 2D layer array made of the saddle-shaped [WS4Cu4] cores interlinked by three pairs of Cu-dps-Cu bridges. Compound 5 has another 2D layer structure in which the [WS4Cu4] cores are held together by four pairs of Cu-dca-Cu and Cu-dpds-Cu bridges. Compound 6 displays a 1D spiral chain structure built of the nido-like [MoOS3Cu3] cores via two pairs of Cu-dpds-Cu bridges. Compound 7 consists of a 2D staircase network in which each [MoOS3Cu3(4,4'-bipy]2 dimeric unit interconnects with four other equivalent units by a pair of 4,4'-bipy ligands and two pairs of dca anions. The [WS4Cu4] core in 4 or 5 and the [MoS3Cu3] core in 7 show a planar 4-connecting node and a seesaw-shaped 4-connecting node, respectively, which are unprecedented in cluster-based supramolecular compounds. The successful assembly of 4-7 from the three cluster precursors 1-3 through flexible ditopic ligands provides new routes to the rational design and construction of complicated cluster-based supramolecular arrays.