Sterically‐Directed Consecutive and Size‐Selective Self‐Assembly of Palladium Diphosphane Complexes with an Ar‐BIAN Ligand: Unexpected Formation of Pentameric and Hexameric Aggregates

The coordination properties of N,N′‐bis[4‐(4‐pyridyl)phenyl]acenaphthenequinonediimine (L¹) and N,N′‐bis[4‐(2‐pyridyl)phenyl]acenaphthenequinonediimine (L²) were investigated in self‐assembly with palladium diphosphane complexes [Pd(P^P)(H₂O)₂](OTf)₂ (OTf=triflate) by using various analytical techniques, including multinuclear (¹H, ¹⁵N, and ³¹P) NMR spectroscopy and mass spectrometry (P^P=dppp, dppf, dppe; dppp=bis(diphenylphosphanyl)propane, dppf= bis(diphenylphosphanyl)ferrocene, and dppe=bis(diphenylphosphanyl)ethane). Beside the expected trimeric and tetrameric species, the interaction of an equimolar mixture of [Pd(dppp)]²⁺ ions and L¹ also generates pentameric aggregates. Due to the E/Z isomerism of L¹, a dimeric product was also observed. In all of these species, which correspond to the general formula [Pd(dppp)L¹]_n(OTf)_2n (n=2–5), the L¹ ligand is coordinated to the Pd center only through the terminal pyridyl groups. Introduction of a second equivalent of the [Pd(dppp)]²⁺ tecton results in coordination to the internal, sterically more encumbered chelating site and induces enhancement of the higher nuclearity components. The presence of higher‐order aggregates (n=5, 6), which were unexpected for the interaction of cis‐protected palladium corners with linear ditopic bridging ligands, has been demonstrated both by mass‐spectrometric and DOSY NMR spectroscopic analysis. The sequential coordination of the [Pd(dppp)]²⁺ ion is attributed to the dissimilar steric properties of the two coordination sites. In the self‐assembled species formed in a 1:1:1 mixture of [Pd(dppp)]²⁺/[Pd(dppe)]²⁺/L¹, the sterically more demanding [Pd(dppp)]²⁺ tectons are attached selectively to the pyridyl groups, whereas the more hindered imino nitrogen atoms coordinate the less bulky dppe complexes, thus resulting in a sterically directed, size‐selective sorting of the metal tectons. The propensity of the new ligands to incorporate hydrogen‐bonded solvent molecules at the chelating site was confirmed by X‐ray diffraction studies.     

Synthesis and Catalytic Use of Gold(I) Complexes Containing a Hemilabile Phosphanylferrocene Nitrile Donor

Removal of the chloride ligand from [AuCl( 1 ‐κP)] ( 2 ) containing a P‐monodentate 1′‐(diphenylphosphanyl)‐1‐cyanoferrocene ligand ( 1 ), by using silver(I) salts affords cationic complexes of the type [Au( 1 )]X, which exist either as cyclic dimers [Au( 1 )]₂X₂ ( 3 a , X=SbF₆; 3 c , X=NTf₂) or linear coordination polymers [Au( 1 )]_nX_n ( 3 a′ , X=SbF₆; 3 b′ , X=ClO₄), depending on anion X and the isolation procedure. As demonstrated for 3 a′ , the polymers can be readily cleaved by the addition of donors, such as Cl^?, tetrahydrothiophene (tht) or 1 , giving rise to the parent compound 2 , [Au(tht)( 1 ‐κP)][SbF₆] ( 5 a ) or [Au( 1 ‐κP)₂][SbF₆] ( 4 a ), respectively, of which the last two compounds can also be prepared by stepwise replacement of tht in [Au( 1 ‐κP)₂][SbF₆]. The particular combination of a firmly coordinated (phosphane) and a dissociable (nitrile) donor moieties renders complexes 3/3′ attractive for catalysis because they can serve as shelf‐stable precursors of coordinatively unsaturated Au^I fragments, analogous to those that result from the widely used [Au(PR₃)(RCN)]X catalysts. The catalytic properties of the Au‐ 1 complexes were evaluated in model annulation reactions, such as the synthesis of 2,3‐dimethylfuran from (Z)‐3‐methylpent‐2‐en‐4‐yn‐1‐ol and oxidative cyclisation of alkynes with nitriles to produce 2,5‐disubstituted 1,3‐oxazoles. Of the compounds tested ( 2 , 3 a′ , 3 b′ , 3 a , 4 a and 5 a ), the best results were consistently achieved with dimer 3 c , which has good solubility in organic solvents and only one firmly bound donor at the gold atom. This compound was advantageously used in the key steps of annuloline and rosefuran syntheses.     

Structural analysis of chiral complexes of palladium(0) with 15-membered triolefinic macrocyclic ligands

The complete structural analysis of the palladium complexes of the triolefinic macrocycles (E,E,E)-1,6,11-tris(arylsulfonyl)-1,6,11-triazacyclopentadeca-3,8,13-trienes, which featured from three identical to three different aryl groups, was achieved by performing X-ray diffraction studies, NMR spectroscopy, and other calculations. The stereochemical complexity is determined by the different isomers formed through complexation of the metal to one or other face of each of the three olefins involved. The palladacyclopropane formulation of the palladium-olefin interaction offers a clear picture of the stereogenicity of the olefin carbon atoms that are complexed to the metal. The energetically favorable isomers were identified in the solid-state and in solution by performing X-ray diffraction and NMR spectroscopic analysis, respectively.     

Three new phosphoric triamides with a [C(O)NH]P(O)[N(C)(C)]2 skeleton: a database analysis of C—N—C and P—N—C bond angles

In N,N,N′,N′‐tetraethyl‐N′′‐(4‐fluorobenzoyl)phosphoric triamide, C₁₅H₂₅FN₃O₂P, (I), and N‐(2,6‐difluorobenzoyl)‐N′,N′′‐bis(4‐methylpiperidin‐1‐yl)phosphoric triamide, C₁₉H₂₈F₂N₃O₂P, (II), the C—N—C angle at each tertiary N atom is significantly smaller than the two P—N—C angles. For the other new structure, N,N′‐dicyclohexyl‐N′′‐(2‐fluorobenzoyl)‐N,N′‐dimethylphosphoric triamide, C₂₁H₃₃FN₃O₂P, (III), one C—N—C angle [117.08 (12)°] has a greater value than the related P—N—C angle [115.59 (9)°] at the same N atom. Furthermore, for most of the analogous structures with a [C(=O)NH]P(=O)[N(C)(C)]₂ skeleton deposited in the Cambridge Structural Database [CSD; Allen (2002). Acta Cryst. B 58 , 380–388], the C—N—C angle is significantly smaller than the two P—N—C angles; exceptions were found for four structures with the N‐methylcyclohexylamide substituent, similar to (III), one structure with the seven‐membered cyclic amide azepan‐1‐yl substituent and one structure with an N‐methylbenzylamide substituent. The asymmetric units of (I), (II) and (III) contain one molecule, and in the crystal structures, adjacent molecules are linked via pairs of N—H...O=P hydrogen bonds to form dimers.     

Hydrolysis of dinuclear ruthenium complexes [{CpRu(PPh3)2}2(micro,eta(1:1)-L)][CF3SO3]2 (L=P4, P4S3): simple access to metal complexes of P2H4 and PH2SH

The reaction of [CpRu(PPh(3))(2)Cl] (1) with half an equivalent of P(4) or P(4)S(3) in the presence of AgCF(3)SO(3) as chloride scavenger affords the stable dimetal complexes [{CpRu(PPh(3))(2)}(2)(micro,eta(1:1)-P(4))][CF(3)SO(3)](2).3 CH(2)Cl(2) (2) and [{CpRu(PPh(3))(2)}(2)(micro,eta(1:1)-P(apical)-P(basal)-P(4)S(3))][CF(3)SO(3)](2).0.5 C(7)H(8) (3), in which the tetrahedral P(4) and mixed-cage P(4)S(3) molecules are respectively bound to two CpRu(PPh(3))(2) fragments through two phosphorus atoms. The coordinated cage molecules, at variance with the free ligands, readily react with an excess of water in THF under mild conditions. Among the hydrolysis products, the new, remarkably stable complexes [{CpRu(PPh(3))(2)}(2)(micro,eta(1:1)-P(2)H(4))][CF(3)SO(3)](2) (4) and [CpRu(PPh(3))(2)(eta(1)-PH(2)SH)]CF(3)SO(3) (8) were isolated. In the former, diphosphane, P(2)H(4), is coordinated to two CpRu(PPh(3))(2) fragments, and in the latter thiophosphinous acid, H(2)PSH, is coordinated to the metal centre through the phosphorus atom. All compounds were characterised by elemental analyses and IR and NMR spectroscopy. The crystal structures of 2, 3, 4 and 8 were determined by X-ray diffraction.     

One‐Electron Oxidation of [M(PtBu3)2] (M=Pd,Pt): Isolation of Monomeric [Pd(PtBu3)2]+ and Redox‐Promoted C−H Bond Cyclometalation

Oxidation of zero‐valent phosphine complexes [M(P^tBu₃)₂] (M=Pd, Pt) has been investigated in 1,2‐difluorobenzene solution using cyclic voltammetry and subsequently using the ferrocenium cation as a chemical redox agent. In the case of palladium, a mononuclear paramagnetic Pd^I derivative was readily isolated from solution and fully characterized (EPR, X‐ray crystallography). While in situ electrochemical measurements are consistent with initial one‐electron oxidation, the heavier congener undergoes C?H bond cyclometalation and ultimately affords the 14 valence‐electron Pt^II complex [Pt(κ²_PC‐P^tBu₂CMe₂CH₂)(P^tBu₃)]⁺ with concomitant formation of [Pt(P^tBu₃)₂H]⁺.