Mononitrosyl iron complexes supported by sterically hindered carboxylate ligands

Complexes that feature a single NO bound to Fe, as postulated in various carboxylate-rich metalloproteins, were prepared by mixing Fe(II) salts, NO, and the sterically encumbered 2,6-dimesitylbenzoate (Mes2ArCO2-). Among the compounds isolated are the potentially useful heterobimetallic synthon Tl(mu-Mes2ArCO2)3Fe(NO) and a novel cubane Fe4(Mes2ArCO2)4(NO)4(mu3-OH)4 that forms in the presence of added H2O and features syn-[FeNO]2 units.     

Modeling dioxygen-activating centers in non-heme diiron enzymes: carboxylate shifts in diiron(II) complexes supported by sterically hindered carboxylate ligands

General synthetic routes are described for a series of diiron(II) complexes supported by sterically demanding carboxylate ligands 2,6-di(p-tolyl)benzoate (Ar(Tol)CO(2)(-)) and 2,6-di(4-fluorophenyl)benzoate (Ar(4-FPh)CO(2)(-)). The interlocking nature of the m-terphenyl units in self-assembled [Fe(2)(mu-O(2)CAr(Tol))(2)(O(2)CAr(Tol))(2)L(2)] (L = C(5)H(5)N (4); 1-MeIm (5)) promotes the formation of coordination geometries analogous to those of the non-heme diiron cores in the enzymes RNR-R2 and Delta 9D. Magnetic susceptibility and M?ssbauer studies of 4 and 5 revealed properties consistent with weak antiferromagnetic coupling between the high-spin iron(II) centers. Structural studies of several derivatives obtained by ligand substitution reactions demonstrated that the [Fe(2)(O(2)CAr')(4)L(2)] (Ar' = Ar(Tol); Ar(4-FPh)) module is geometrically flexible. Details of ligand migration within the tetracarboxylate diiron core, facilitated by carboxylate shifts, were probed by solution variable-temperature (19)F NMR spectroscopic studies of [Fe(2)(mu-O(2)CAr(4-FPh))(2)-(O(2)CAr(4-FPh))(2)(THF)(2)] (8) and [Fe(2)(mu-O(2)CAr(4-FPh))(4)(4-(t)BuC(5)H(4)N)(2)] (12). Dynamic motion in the primary coordination sphere controls the positioning of open sites and regulates the access of exogenous ligands, processes that also occur in non-heme diiron enzymes during catalysis.     

Mononuclear transition metal complexes with sterically hindered carboxylate ligands: Synthesis, structural and spectral properties

The metal coordination geometry in the active site of metalloproteins are very different from the one of small inorganic complexes, due to the inflexibility of the ligand set from amino acid side chains different from freely moving ligand set in synthesis. Using the sterically hindered 2,6-di-(p-fluorophenyl)benzoate(L) ligand, a series of mononuclear Co(II), Ni(II) and Cu(II) complexes of general formula [M(L)₂(Hdmpz)₂] (where, Hdmpz = 3,5-dimethyl pyrazole) have been synthesized and characterized by the variety of spectroscopic methods. A distorted octahedral geometry in case of nickel, tetrahedral geometry for cobalt and square pyramidal in copper was observed in the X-ray studies, which also revealed that the uncoordinated oxygen atom of the carboxylate group forms intramolecular hydrogen bonding with the N-H group of the coordinated 3,5-dimethylpyrazole in case of cobalt and copper.     

Stereomutations of atropisomers of sterically hindered salophen ligands

[structure: see text] The stereomutations in nonsymmetrical salophen ligands 1-4 were studied by means of dynamic NMR and HPLC methods. DNMR experiments showed that in DMSO-d(6) hindered ligands 2-4 exist in two chiral conformations, depending on whether the imine carbon atoms are in a cis or trans disposition with respect to the plane of the central o-phenylenediamine ring, the latter being more stable by 1.0 kcal mol(-1). Owing to its higher dipole moment, in the apolar solvent C(6)D(6) the cis conformer is destabilized with respect to the trans one, in agreement with the results of ab initio calculations. In DMSO-d(6) solution the two conformers are in equilibrium through the less hindered rotation about the C6-N7 bond aligned to the a(6,7) axis, and the interconversion barriers range from 18.4 to 19.3 kcal mol(-1). The enantiomerization process is a two step-process that implies sequential rotations around the C6-N7 and the C1-N8 bonds, so that the rate determining step is the slower rotation around the more hindered C1-N8 bond aligned to the a(1,8) axis, and the energy barriers range from 21.4 to 21.9 kcal mol(-1). These values compare well with those determined by chromatography on an enantioselective HPLC column at low temperature, thus confirming that DNMR and DHPLC can be conveniently employed as complementary techniques.     

Oxidation of bridging groups by carboxylate coordinated ligands in palladium clusters

Thermolysis of tetranuclear palladium clusters Pd₄(-Q)₄ Pd₄(-Q)₄(-O₂CR)₄ (Q=CPh₂ or CO;R=Me, CMe₃, Ph, CH₂Cl or CF₃) has been found to involve innersphere oxidation of carbene or carbonyl ligands during which an oxygen atom transfer occurs from the carboxylate group to the carbene or carbonyl ligand. The thermolysis of the carbonyl clusters gives rise to the products of CO₂ insertion into the C–H bond of benzene or toluene used as solvents forming benzoic acid from benzene and a mixture of phenylacetic and toluic acids from toluene. The reaction of [Pd(OAc)₂(PPh₃)]₂ with HCO₂H includes the transfer of an O atom from formate ligand to the P atom and cleavage of the P-Ph bond accompanied by transfer of the Ph group from PPh₃ ligand to the palladium atom. The structure of the complex formed, [Pd(-O₂PPh₂)(C₆H₅)(PPh₃)]₂, has been resolved by X-ray analysis.     

Stable O,N-heterocyclic plumbylenes bearing sterically hindered o-amidophenolate ligands

1. Download high-res image (122KB)
2. Download full-size image

     

Highly efficient carbazolyl-derived phosphine ligands: application to sterically hindered biaryl couplings

A new family of phosphine ligands bearing a bulky carbazolyl scaffold is described. With the combination of ligand 2a and Pd(OAc)(2), difficult tri-ortho-substituted biaryl couplings are accomplished smoothly. In particular, the catalyst loading as low as 0.02 mol% of Pd for non-activated 2,6-disubstituted aryl chloride coupling can be achieved.     

Chiral phosphine-phosphoramidite ligands for highly efficient Ir-catalyzed asymmetric hydrogenation of sterically hindered N-arylimines

A mild and general iridium-catalyzed, highly enantioselective hydrogenation of sterically hindered N-arylimines with a new H(8)-BINOL-derived phosphine-phosphoramidite ligand has been developed. The present catalytic system features high turnover numbers (up to 100000) and good to perfect enantioselectivities (up to 99% ee) for the hydrogenation of a variety of sterically hindered N-arylimines.     

Metal coordination by sterically hindered heterocyclic ligands, including 2-vinylpyridine, assessed by investigation of cobaloximes

Structural and 1H NMR data have been obtained for cobaloximes with the bulkiest substituted pyridines reported so far. We have isolated in noncoordinating solvents the complexes CH3Co(DH)2L (methylcobaloxime, where DH = the monoanion of dimethylglyoxime) with L = sterically hindered N-donor ligands: quinoline, 4-CH3quinoline, 2,4-(CH3)2pyridine, and 2-R-pyridine (R = CH3, OCH3, CH2CH3, CH=CH2). We have found that the Co-N(ax) bond is very long in the structurally characterized complexes. In particular, CH3Co(DH)2(4-CH3quinoline) has a longer Co-N(ax) bond (2.193(3) A) than any reported for methylcobaloximes. The main cause of the long bonds is unambiguously identified as the steric bulk of L by the fairly linear relationship found for Co-N(ax) distance vs CCA (calculated cone angle, CCA, a computed measure of bulk) over an extensive series of methylcobaloximes. The linear relationship improves if L basicity (quantified by pKa) is taken into account. In anhydrous CDCl3 at 25 degrees C, all complexes except the 2-aminopyridine adduct exhibit 1H NMR spectra consistent with partial dissociation of L to form the methylcobaloxime dimer. 1H NMR experiments at -20 degrees C allowed us to assess qualitatively the relative binding ability of L as follows: 2,4-(CH3)2pyridine > 4-CH3quinoline approximately = quinoline approximately = 2-CH3pyridine > 2-CH3Opyridine > 2-CH3CH2pyridine > 2-CH2=CHpyridine. The broadness of the 1H NMR signals at 25 degrees C suggests a similar order for the ligand exchange rate. The lack of dissociation by 2-aminopyridine is attributed to an intramolecular hydrogen bond between the NH2 group and an oxime O atom. The weaker than expected binding of 2-vinylpyridine relative to the Co-N(ax) bond length is attributed to rotation of the 2-vinyl group required for this bulky ligand to bind to the metal center, a conclusion supported by pronounced changes in 2-vinylpyridine signals upon coordination.     

Determination of sterically hindered phenols by gas-liquid chromatography

Conclusions The possibility has been shown and the optimum conditions have been found for the identification of various 4-alkyl-2,6-di-tert-butylphenols by gas-liquid chromatography on the stationary liquid phases poly(ethylene glycol adipate) and Apiezon-L deposited on Celite C22.Translated from Izvestiya Akademii Nauk SSSR, Seriya Khimicheskaya, No. 7, pp. 1618–1622, July, 1970.     

A stepwise degradation of sterically hindered CpCo-cyclobutadiene complexes

Sterically hindered CpCo stabilized cyclobutadiene complexes 4 were oxidized by ceric ammonium nitrate to yield the dinitratocobalt complexes 5. The thermolysis of 5a and the reaction of 5a with tert-butyl isocyanide as well as NaBH4 is reported.     

Copper halide clusters and polymers supported by bipodal heteroelemental ligands

The flexible, multi dentate, heteroelemental, dipodal ligands; bis(2pyridylthio)methane, (PyS)₂CH₂ (Py = pyridyl = C₅H₄N), (PymS)₂CH₂, bis(2pyrimidylthio)methane, and bipyrimidyldisulfide, (PymS)₂ (Pym = pyrimidine, C₄H₃N₂), were reacted with a series of copper precursors to determine whether monomeric compounds, cubane clusters or polymeric chains would be obtained. Copper(II) chloride, copper(I) cyanide and copper(I) thiocyanate afforded infinite polymeric chains while copper(I) iodide afforded tetranuclear clusters supported by two ligand molecules. All products were characterized in the solid-state by X-ray crystallography.     

Synthesis, structure and electroluminescent properties of cyclometalated iridium complexes possessing sterically hindered ligands

New CN donor ligands incorporating pyridine or benzoimidazole N donors and a sterically hindered cyclometalating aromatic core featuring a polyphenylenephenyl, fluoranthene, or triphenylene segment are prepared and successfully converted into heteroleptic iridium(III) cyclometalated complexes with acetylacetone auxiliary ligands. The X-ray structure of the complex, derived from a ligand containing a fluoranthene fragment, has been solved to unveil the corresponding structure. The results clearly demonstrate that the nature of the sigma-coordinating ligand segment plays a key role in dictating the emission profile and peak position, such that the emission hue has been successfully tuned ranging from green to red. Supplementary support of this viewpoint is also rendered by computational (DFT) approaches. Electroluminescent devices fabricated using a complex as dopant in the PVK matrix were found to exhibit bright greenish yellow emission with promising device characteristics (maximum brightness 26450 cd m(-2) at 30 V and a maximum current efficiency of 40 cd A(-1)).     

Quenching of aromatic ketone phosphorescence by sterically hindered alkenes

The deactivation of the excited states of triplet ketones by sterically hindered alkenes results in lower rate constants (usually due to increased activation energies) than by relatively unhindered alkenes.     

High-pressure transesterification of sterically hindered esters

A mild, rapid, and efficient method for the solvolysis of sterically hindered esters under high pressure is described. Transesterification is carried out in the presence of DBU at room temperature and at a pressure of 10 kbar to give quantitative conversions within short reaction times. The substrates examined included aromatic and aliphatic esters of sterically hindered alcohols and phenols. An optically pure benzyl ester of phenylalanine was chosen to study racemization of the amino acid esters under high-pressure reaction conditions.     

Self-addition of a sterically hindered alkynylselenolate

[structure: see text] The unprecedented formation of a complex macrocyclic selenium-carbon ring system, which is initiated by the action of coordinating reagents upon a sterically hindered alkynylselenolate, has been observed. The crystal structure of the product could be obtained and shows a rigid tricyclic arrangement consisting only of selenium and sp(2)-hybridized carbon atoms. This reactivity stands in contrast to the corresponding unsubstituted alkynylselenolates and is an example where a bulky substituent destabilizes an adjacent unsaturated pi-system.     

Palladium-catalyzed arylation of malonates and cyanoesters using sterically hindered trialkyl- and ferrocenyldialkylphosphine ligands.

Palladium-catalyzed reactions of aryl bromides and chlorides with two common stabilized carbanions-enolates of dialkyl malonates and alkyl cyanoesters-are reported. An exploration of the scope of these reactions was conducted, and the processes were shown to occur in a general fashion. Using P(t-Bu)(3) (1), the pentaphenylferrocenyl ligand (Ph(5)C(5))Fe(C(5)H(4))P(t-Bu)(2) (2), or the adamantyl ligand (1-Ad)P(t-Bu)(2) (3), reactions of electron-poor and electron-rich, sterically hindered and unhindered aryl bromides and chlorides were shown to react with diethyl malonate, di-tert-butyl malonate, diethyl fluoromalonate, ethyl cyanoacetate, and ethyl phenylcyanoacetate. Although alkyl malonates and ethyl alkylcyanoacetates did not react with aryl halides using these catalysts, the same products were formed conveniently in one pot from diethylmalonate by cross-coupling of an aryl halide in the presence of excess base and subsequent alkylation.