A study of optical absorption and dielectric properties in lithium chromium diphosphate compound

The optical properties of diphosphate LiCrP₂O₇ compound prepared by the classic ceramic method were recorded at room temperature. Absorption spectrum shows the presence of five characteristics bands related to the octahedral transitions of Cr³⁺ from ground term ⁴A_2g to excited terms. Crystal field strength and inter electronic repulsion Racah parameters were deduced. The calculated value of direct \( {E}_g^{\mathrm{direct}} \)=1.62 eV energy gap has been found using Tauc’s procedure. Besides, the dielectric properties were carried out by impedance spectroscopy at different temperatures (460–700 K). The frequency and temperature dependent of the real ε ^′ and imaginary ε ^″ parts of the dielectric constant were discussed. The variation of the frequency power law of the imaginary part of dielectric constant was analyzed in terms of two different conduction mechanisms. Furthermore, the modulus plots can be characterized by the empirical Kohlrausch–Williams–Watts (K.W.W.) function and the obtained values of activation energies deduced from relaxation frequency are in order of E _a (I) = 0.49 eV and E _a (II) = 0.87 eV.

Open image in new window

Graphical abstract Optical and dielectric proprieties of lithium chromium diphosphate

     

Dielectric and AC conductivity studies in Li<Subscript>2</Subscript>O-CoO-B<Subscript>2</Subscript>O<Subscript>3</Subscript>-TeO<Subscript>2</Subscript> glasses

CoO and Li₂O mixed with borotellurite glasses in the compositions, (B₂O₃)_0.2-(TeO₂)_0.3-(CoO) _x -(Li₂O)_0.5?x, where x = 0.05, 0.10, 0.15, 0.20, 0.25, 0.30, 0.35, 0.40, 0.45, and 0.50 were synthesized by fast cooling the melt to room temperature. Absence of crystalline phases in the samples was confirmed by X-ray diffraction studies. Changes in dielectric properties with frequency and temperature over wide ranges have been measured. Dielectric constant and loss increased with increase in CoO content. AC conductivity has been analyzed using Mott’s small polaron model and activation energy was determined. Activation energy decreased and conductivity increased with increase in CoO content up to 0.3 mole fractions, and they behaved oppositely for higher concentration of CoO. This observed change of trend in activation energy and conductivity at 0.3 mole fraction of CoO ascribed to switch over of conduction mechanism occurring from predominantly ionic to electronic regime. For the first time, a transition of conduction mechanism is observed in borotellurite glasses. Temperature and composition independent relaxation mechanism in these glasses has been confirmed by plotting the scaled conductivity master curves. Hunt’s model has been invoked to understand the frequency dispersion of conductivity.

Open image in new window

Graphical abstract Plots of ln(ε′′) versus ln(F) for BTCL2 glass at different temperatures

     

Substitution effects on the bulk and surface properties of (Li,Ni)Mn<Subscript>2</Subscript>O<Subscript>4</Subscript>

Manganese oxides of spinel structure, LiMn₂O₄, Li_1-x Ni _x Mn₂O₄ (0.25 ≤ x≤ 0.75), and NiMn₂O₄, were studied by EDS, XRD, SEM, magnetic (M-H, M-T), and XPS measurements. The samples were synthesized by an ultrasound-assisted sol-gel method. EDS analysis showed good agreement with the formulations of the oxides. XRD and Rietveld refinement of X-ray data indicate that all samples crystallize in the Fd3m space group characteristic of the cubic spinel structure. The a-cell parameter ranges from a = 8.2276 Å (x = 0) to a = 8.3980 Å (x = 1). SEM results showed particle agglomerates ranging in size from 2.3 μm (x = 0) down to 0.8 μm (x = 1). Hysteresis magnetization vs. applied field curves in the 5–300K range was recorded. ZFC-FC measurements indicate the presence of two magnetic paramagnetic-ferrimagnetic transitions. The experimental Curie constant was found to vary from 5 to 7.1 cm³ K mol^?1 for the range of compositions studied (0 ≤ x ≤ 1). XPS studies of these oxides revealed the presence of Ni²⁺, Mn³⁺, and Mn⁴⁺. The experimental Ni/Mn atomic ratios obtained by XPS were in good agreement with the nominal values. A linear relationship of the average oxidation state of Mn with Ni content was observed. The oxide’s cation distributions as a function of Ni content from x = 0 ?Li⁺[Mn³⁺Mn⁴⁺]O₄ to x = 1 \( {\mathrm{Ni}}_{0.35}^{2+}{\mathrm{Mn}}_{0.65}^{3+}\left[{\mathrm{Ni}}_{0.65}^{2+}\right.\left.{\mathrm{Mn}}_{1.35}^{3+}\right]{\mathrm{O}}_4 \) were proposed.     

Variable Temperature Single Crystal EPR Studies of Cu(II) in Dipotassium Diaquabis(Malonato-<Emphasis Type="Italic">κ</Emphasis><Superscript>2</Superscript><Emphasis Type="Italic">O,O</Emphasis>′) Nickelate Dihydrate: An Example of Contaminated Ground State

Single crystal X-band electron paramagnetic resonance (EPR) studies on divalent copper ions embedded in dipotassium diaquabis(malonato-κ ² O,O′) nickelate dihydrate have been performed at 300, 123 and 77 K to understand the nature of Jahn–Teller distortion in the paramagnetic host lattice. The angular variation of the EPR spectra reveals the presence of two sites, with one site not showing hyperfine resolution even at 77 K. The spin-Hamiltonian parameters of this six-coordinated Cu(II) ion, evaluated from EPR spectra at various temperatures, are:

• 300 K: g ₁₁ = 2.125, g ₂₂ = 2.118, g ₃₃ = 2.290, no copper hyperfine resolution
• 123 K: g ₁₁ = 2.229, g ₂₂ = 2.113, g ₃₃ = 2.319 and A ₁₁ = 5.02, A ₂₂ = 3.82, A ₃₃ = 6.87 mT
• 77 K: g ₁₁ = 2.224, g ₂₂ = 2.114, g ₃₃ = 2.324 and A ₁₁ = 5.32, A ₂₂ = 3.90, A ₃₃ = 7.06 mT

respectively. The low value observed for A ₃₃ at 123 and 77 K has been explained by assuming a ground state \({\text{d}}_{{x^{2} - y^{2} }}\) wave function for Cu(II) ions, contaminated with the excited state \({\text{d}}_{{z^{2} }}\). From the temperature dependence of the EPR spectra, the Cu(II) ions can be considered as a static Jahn–Teller system, with contaminated ground state. The admixture coefficients and bonding parameters have also been calculated by combining EPR and optical data. The EPR spectrum of powder sample confirms single crystal data.

     

Conductance studies of NaCl,KCl, NaBr,KBr, NaI,Bu<Subscript>4</Subscript>NI,and NaBPh<Subscript>4</Subscript> in water + 2-propoxyethanol mixtures at 298.15 K

The molar conductances of sodium chloride (NaCl), potassium chloride (KCl), sodium bromide (NaBr), sodium iodide (NaI), tetrabutylammonium iodide (Bu₄NI), and sodium tetraphenylborate (NaBPh₄) in water?+?2-propoxyethanol binary mixtures at T?=?298.15 K were determined. Conductance values were analyzed using a low-concentration chemical model (lcCM). The ionic conductivities of Na⁺, K⁺, Bu₄N⁺, Cl^?, I^?, Br^?, and BPh₄ ^? ions were determined using Fuoss–Hirsch’s assumption. The dependencies of the values of limiting molar conductance (Λ _o), limiting ionic conductance of the individual anions (λ _o ^± ), and Walden products (Λ _o???η and λ _o ^± ???η) as a function of the composition of water?+?2-propoxyethanol binary mixtures were discussed.

Open image in new window

Graphical abstract Limiting molar conductances Λ _o [S·cm²·mol^?1] of NaCl, NaBr, NaI, KCl, NaBPh₄, and NBu₄I as a function of the mole fraction, x ₂, in water (1)?+?2-propoxyethanol (2) mixtures at 298.15 K: empty diamonds NaCl, empty squares NaBr, empty triangles NaI, filled triangles KCl, filled squares NaBPh₄, and filled diamonds NBu₄I

     

The magnetization reversal in CoFe<Subscript>2</Subscript>O<Subscript>4</Subscript>/CoFe<Subscript>2</Subscript> granular systems

The temperature-dependent field cooling (FC) and zero-field cooling (ZFC) magnetizations, i.e., M _FC and M _ZFC, measured under different magnetic fields from 500 Oe to 20 kOe have been investigated on two exchange–spring CoFe₂O₄/CoFe₂ composites with different relative content of CoFe₂. Two samples exhibit different magnetization reversal behaviors. With decreasing temperature, a progressive freezing of the moments in two composites occurs at a field-dependent irreversible temperature T _irr. For the sample with less CoFe₂, the curves of ?d(M _FC ? M _ZFC)/dT versus temperature T exhibit a broad peak at an intermediate temperature T ₂ below T _irr , and the moments are suggested not to fully freeze till the lowest measuring temperature 10 K. However, for the ?d(M _FC ? M _ZFC)/dT curves of the sample with more CoFe₂, besides a broad peat at an intermediate temperature T ₂, a rapid rise around the low temperature T ₁~15 K is observed, below which the moments are suggested to fully freeze. Increase of magnetic field from 2 kOe leads to the shift of T ₂ and T _irr towards a lower temperature, and the shift of T ₂ is attributable to the moment reversal of CoFe₂O₄.

Open image in new window

Graphical abstract CoFe₂O₄/CoFe₂ composites with different relative content of CoFe₂ were prepared by reducing CoFe₂O₄ in H₂ for 4 h (S4H) and 8 h (S8H). The temperature-dependent FC and ZFC magnetizations, i.e., M _FC and M _ZFC, under different magnetic fields from 500 Oe to 20 kOe have been investigated. Two samples exhibit different magnetization reversal behaviors. With decreasing temperature, a progressive freezing of the moments in two composites occurs at field-dependent irreversible temperature T _irr. For the S4H sample, the curves of ?d(M _FC ? M _ZFC)/dT versus temperature T exhibit a broad and field-dependent relaxing peak at T ₂ below T _irr (figure a), and the moments were suggested not to fully freeze till the lowest measuring temperature 10 K. However, for the S8H sample, it exhibits the reentrant spin-glass state around 50 K, as evidenced by a peak in the M _FC curve (inset in figure b) and as a result of the cooperative effects of the random anisotropy of CoFe₂O₄, exchange–spring occurring at the interface of CoFe₂O₄ and CoFe₂ together with the inter-particle dipolar interaction (figure c); in ?d(M _FC ? M _ZFC)/dT curves, besides a broad relaxing peat at T ₂, a rapid rise around the low-temperature T ₁~15 K is observed, below which the moments are suggested to fully freeze. Increase of magnetic field from 2 kOe leads to the shift of T ₂ and T _irr towards a lower temperature, and the shift of T ₂ is attributable to the moment reversal of CoFe₂O₄.

     

High-temperature complex impedance and modulus spectroscopic studies of doped Na<Subscript>0.5</Subscript>Bi<Subscript>0.5</Subscript>TiO<Subscript>3</Subscript>-BaTiO<Subscript>3</Subscript> ferroelectric ceramics

Lead-free Na_0.5Bi_0.5TiO₃ (NBT) and (1 ? x)Na_0.5Bi_0.5TiO₃ + xBaTiO₃ with x = 0.1 and 0.2 (where x = 0.1 and 0.2 are named as NBT1 and NBT2, respectively), (1 ? y)Na_0.5Bi_0.5TiO₃ + yBa_0.925Nd_0.05TiO₃ with y = 0.1 and 0.2 (where y = 0.1 and 0.2 are named as NBT3 and NBT4, respectively)-based relaxor ferroelectric ceramics were prepared using the sol-gel method. The crystal structure was investigated by X-ray diffraction (XRD) at room temperature (RT). The XRD patterns confirmed the presence of the rhombohedral phase in all the samples. The electrical properties of the present NBT-based samples were investigated by complex impedance and the modulus spectroscopy technique in the temperature range of RT–600 °C. The AC conductivity was found to increase with the substitution of Ba²⁺ ions to the NBT sample whereas it significantly decreased with the addition of Nd³⁺ ions. The more anion vacancies in Ba-added samples and the lower anion vacancies in Nd-added samples were found to be responsible for higher and lower conductivities, respectively.     

High cycling performance Si/CNTs@C composite material prepared by spray–drying method

The anode material Si/CNTs@C composite is prepared by a spray–drying combined pyrolysis technology. The as–prepared material is characterized by XRD, SEM, TEM, and electrochemical measurements. The composite is composed of nano–Si, CNTs, flake graphite, and amorphous glucose–pyrolyzed carbon, and CNTs provides a good wrapping effect to buffer the volume change of silicon. The composite as anode for LIB shows good electrochemical performance. In the voltage range of 2.00–0.01 V, it delivers initial charge capacity of 630.5 at 100 mA g^?1, and 85.14 % of initial capacity is retained even after 50 cycles. The CV and AC impedance analysis indicate that the prepared composite separately shows good electrode stability and low charge- transfer impedance R _ct. The results indicate that the Si/CNTs@C composite is a potential alternative to graphite for high energy–density lithium–ion batteries.

Open image in new window

Graphical abstract The anode material Si/CNTs@C composite is prepared by a spray–drying combined pyrolysis technology.

     

Photoionization of the Xe atom and Xe@C<Subscript>60</Subscript> molecule

Photoionization of the Xe atom and Xe@C₆₀ molecule have been studied usingthe random phase approximation with exchange (RPAE) method. The Xe atom was described byrelaxed orbitals including overlap integrals. The C₆₀ fullerene has beenrepresented by an attractive short range spherical well with potentialV(r), given byV(r) =  ?V ₀ forr _i  < r < r _o ,otherwise V(r) = 0 wherer _i andr _o are respectively, the inner and outerradii of the spherical shell. The time independent Schrödinger equation was solved usingboth regular and irregular solutions and the continuous boundary conditions atr _i andr _o . The results demonstrate improvementto previous calculations for both the Xe atom and Xe@C₆₀ molecule and comparevery well with the recent experimental data.     

Surface structural,morphological, and catalytic studies of homogeneously dispersed anisotropic Ag nanostructures within mesoporous silica

Highly dispersed anisotropic Ag nanostructures were synthesized within the channels of 3-aminopropyltrimethoxysilane (APTMS)-modified mesoporous SBA-15 for catalyzing the reduction of p-dinitrobenzene, p-nitrophenol, and p-nitroacetophenone, respectively. A green templating process without involving any reducing agent, by varying the amount (1–10 wt.%) of Ag loading followed by calcination at 350 °C under H₂ led to change in the morphology of Ag nanoparticles from nanospheres (~7–8 nm) to nanorods (aspect ratio ~12–30 nm) without any deformation in mesoporous sieves. In comparison to white bare SBA-15, gray-colored samples were formed with Ag impregnation exhibiting absorption bands at 484 and 840 nm indicating the formation of anisotropic Ag nanostructures within mesoporous matrix. TEM and FE-SEM micrographs confirmed the presence of evenly dispersed Ag nanostructures within as well as on the surface of mesoporous matrix. AFM studies indicated a small decrease in the average roughness of SBA-15 from 20.59 to 19.21 nm for 4 wt.% Ag/m-SBA-15, illustrating the encapsulation of majority of Ag nanoparticles in the siliceous matrix and presence of small amount of Ag nanoparticles on the mesoporous support. Moreover, due to plugging of mesopores with Ag, a significant decrease in surface area from 680 m²/g of SBA-15 to 385 m²/g was observed. The Ag-impregnated SBA-15 catalyst displayed superior catalytic activity than did bare SBA-15 with 4 wt.% Ag-loaded catalyst exhibiting optimum activity for selective reduction of p-nitrophenol to p-aminophenol (100 %), p-nitroacetophenone to p-aminoacetophenone (100 %), and p-dinitrobenzene to p-nitroaniline (87 %), with a small amount of p-phenylenediamine formation.

Open image in new window

Graphical abstract This paper demonstrates the spontaneous formation of uniformly dispersed Ag nanospecies of various morphologies (nanospheres, size ~7–8 nm and nanorods, aspect ratio ~12–30 nm), both within as well as on the surface of the mesoporous SBA-15, as a function of increased Ag loading. Surface structural and other physiochemical properties of Ag/m-SBA-15 nanocomposites were considerably influenced w.r.t change in Ag loading. Ag/m-SBA-15 nanocomposites with 4 wt.% Ag loading exhibited the highest selectivity (87 %) for the selective reduction of p-dinitrobenzene to p-nitroaniline and 100 % selectivity for p-nitrophenol to p-aminophenol and p-nitroacetophenone to p-aminoacetophenone, respectively.

     

Ferrimagnetic nanoparticles for self-controlled magnetic hyperthermia

Based on the Heisenberg model including single-site uniaxial anisotropy and using aGreen’s function technique we studied the influence of size and composition effects on theCurie temperature T _C , saturationmagnetization M _S and coercivityH _C of spherical nanoparticles with astructural formulaM e _1?x Zn _x Fe₂O₄,Me = Ni, Cu, Co, Mn. It is shown that for x = 0.4–0.5and d = 10–20 nm these nanoparticles have aT _C  = 315 K and are suitable for aself-controlled magnetic hyperthermia.     

Polyol technique synthesis of Nb<Subscript>2</Subscript>O<Subscript>5</Subscript> coated on LiFePO<Subscript>4</Subscript> cathode materials for Li-ion storage

A novel approach has been made to tailor Niobium pentoxide (Nb₂O₅) as a coating material on the surface of lithium iron phosphate (LiFePO₄) via a facile polyol technique. The coating content was optimized at 1 wt%. The superficial coating demonstrated superior discharge capacity than the pristine LiFePO₄. However, increasing the coating content further would result in a capacity loss. This may be due to the electrochemical inactiveness that increases with the content of the coating material, and 1 wt% of Nb₂O₅-coated LiFePO₄ sample exhibits initial discharge capacity of 163 mAh g^?1 at a current of 0.1 C and retains a stable discharge capacity of 143 mAh g^?1 up to 400 cycles at 1 C rate with a coulombic efficiency of 98%.

Open image in new window

Graphical abstract ?

     

Derivation of Hamaker Dispersion Energy of Amorphous Carbon Surfaces in Contact with Liquids Using Photoelectron Energy-Loss Spectra

Hamaker interaction energies and cutoff distances have been calculated for disordered carbon films, in contact with purely dispersive (diiodomethane) or polar (water) liquids, using their experimental dielectric functions ε (q, ω) obtained over a broad energy range. In contrast with previous works, a q-averaged <ε (q, ω) >  _q is derived from photoelectron energy-loss spectroscopy (XPS-PEELS) where the energy loss function (ELF) < Im[?1/ε (q, ω)] >  _q is a weighted average over allowed transferred wave vector values, q, given by the physics of bulk plasmon excitation. For microcrystalline diamond and amorphous carbon films with a wide range of (sp³/sp² + sp³) hybridization, non-retarded Hamaker energies, A ₁₃₂ (L < 1 nm), were calculated in several configurations, and distance and wavenumber cutoff values were then calculated based on A ₁₃₂ and the dispersive work of adhesion obtained from contact angles. A geometric average approximation, H _0?CVL ?=?(H _0?CVC H _0?LVL )^1/2, holds for the cutoff separation distances obtained for carbon-vacuum-liquid (CVL), carbon-vacuum-carbon (CVC) and liquid-vacuum-liquid (LVL) equilibrium configurations. The linear dependence found for A _CVL, A _CLC and A _CLV values as a function of A _CVC, for each liquid, allows predictive relationships for Hamaker energies (in any configuration) using experimental determination of the dispersive component of the surface tension, \( {\gamma}_{CV}^d \), and a guess value of the cutoff distance H _0?CVC of the solid.

Open image in new window

Graphical Abstract

     

Synthesis,Luminescent Properties of aza-Boron-Diquinomethene Difluoride Complexes and Their Application for Fluorescent Security Inks

Two aza-boron-diquinomethene (aza-BODIQU) complexes bearing phenyl and carbazyl substituents were synthesized and characterized. Their photophysical properties were investigated systematically via spectroscopic and theoretical methods. Both complexes exhibit strong ¹π-π* transition absorptions (λ _abs = 400–540 nm) and intense fluorescent emissions (λ _em = 440–600 nm, Φ _PL  = 0.93 and 0.78) in CH₂Cl₂ solution and in solid state at room temperature. Compared to the complex with phenyl groups, the complex bearing carbazyl groups shows significant bathochromic shift in both absorption and emission. This could be attributed to the larger π-electron conjugation of the carbazole unit and intramolecular charge transfer feature from carbazole to aza-BODIQU component. In addition, the complexes exhibit intense photoluminescence and good stability on antacid, anti-alkali and stability in printing ink samples, which makes them potential dopants for the application of fluorescent security inks.     

Magnetic M<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript>O<Subscript><Emphasis Type="Italic">y</Emphasis></Subscript>@N-C as heterogeneous catalysts for the catalytic oxidation of aniline solution with sulfate radicals

Metal nanoparticles have been combined with magnet metal–organic frameworks (MOFs) to afford new materials that demonstrate an efficient catalytic degradation, high stability, and excellent reusability in areas of catalysis because of their exceptionally high surface areas and structural diversity. Magnetic M _x O _y @N-C (M = Fe, Co, Mn) nanocrystals were formed on nitrogen-doped carbon surface by using 8-hydroxyquinoline as a C/N precursor. The Co@N-C, MnO@N-C, and Fe/Fe₂O₃@N-C catalysts were characterized by X-ray diffraction (XRD), Raman, scanning electron microscopy (SEM), high-resolution transmission electron microscopy (HRTEM), N₂ adsorption/desorption, and X-ray photoelectron spectroscopy (XPS). The catalytic performances of catalysts were thoroughly investigated in the oxidation of aniline solution based on sulfate radicals (SO₄ ^?.) toward Fenton-like reaction. Magnetic M _x O _y @N-C exhibits an unexpectedly high catalytic activity in the degradation of aniline in water. A high magnetic M _x O _y @N-C catalytic activity was observed after the evaluation by aniline degradation in water. Aniline degradation was found to follow the first-order kinetics, and as a result, various metals significantly affected the structures and performances of the catalysts, and their catalytic activity followed the order of Co > Mn > Fe. The nanoparticles displayed good magnetic separation under the magnetic field.

Open image in new window

Graphical Abstract ?

     

Restricting Positive Energy Representations of Diff<Superscript>+</Superscript>(<Emphasis Type="Italic">S</Emphasis><Superscript>1</Superscript>) to the Stabilizer of <Emphasis Type="Italic">n</Emphasis> Points

Let G _n ? Diff⁺(S ¹) be the stabilizer of n given points of S ¹. How much information do we lose if we restrict a positive energy representation \(U^c_h\) associated to an admissible pair (c, h) of the central charge and lowest energy, to the subgroup G _n ? The question, and a part of the answer originate in chiral conformal QFT. The value of c can be easily “recovered” from such a restriction; the hard question concerns the value of h. If c ≤ 1, then there is no loss of information, and accordingly, all of these restrictions are irreducible. In this work it is shown that \(U^c_{h}|_{G_n}\) is always irreducible for n =  1 and, if h =  0, it is irreducible at least up to n ≤  3. Moreover, an example is given for c >  2 and certain values of \(h \neq \tilde{h}\) such that \(U^c_{h}|_{G_1}\simeq U^c_{\tilde{h}}|_{G_1}\) . It is also concluded that for these values \(U^c_{h}|_{G_n}\) cannot be irreducible for n ≥  2. For further values of c, h and n, the question is left open. Nevertheless, the example already shows that, on the circle, there are conformal QFT models in which local and global intertwiners are not equivalent.     

Optimization of rechargeable zinc-air battery with Co<Subscript>3</Subscript>O<Subscript>4</Subscript>/MnO<Subscript>2</Subscript>/CNT bifunctional catalyst: effects of catalyst loading,binder content,and spraying area

The air cathode is the most crucial component for a zinc-air battery (ZAB) system, which inquires fast diffusion of gaseous O₂ and decent bifunctional catalytic performance. Herein, based on our previous attempts, we developed a bi-functional electro-catalyst utilizing co-doped manganese dioxide nanotube/carbon nanotube (CNT) composite to improve the catalytic activity toward both oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). A simple characterization of the morphology and physicochemical properties of various Co₃O₄/MnO₂/CNT (CMC) composites was performed by employing various techniques (SEM, TEM, and XRD). More importantly, using CMC composite as the bifunctional cathode catalysts, we thoroughly investigated the effects of catalyst loading, bonding layer loading, and spraying area in catalyst layer (CL) on cell performance and charge-discharge cyclic ability for rechargeable zinc-air batteries. The highest peak power density of 400.3 mW cm^?2 can be reached when the catalyst loading is 3 mg cm^?2, the spraying area is 1 cm² and the binder content is 80 μL. The rechargeable zinc-air batteries with the air electrodes containing different spraying areas and bonding layer loadings are stably operated for 22 h at a high current density (100 mA cm^?2) and show a maximum voltage gap of 1.5 V between charge and discharge voltages. All these optimization efforts are particularly important to future large-scale applications in ZAB.

Open image in new window

Graphical abstract ?

     

Theoretical Investigations of the Spin Hamiltonian Parameters for the Mononuclear Square Pyramidal [CuO<Subscript>5</Subscript>] Groups in Two Paddle Wheel Copper Complexes

The spin Hamiltonian parameters (SHPs) (g factors and hyperfine structure constants) for the mononuclear square pyramidal [CuO₅] groups in two paddle wheel copper complexes {Cu₂(μ₂–O₂CCH₃)₄}(OCNH₂CH₃) and \({}_{\infty }^{3} [{\text{Cu}}_{ 2}^{\text{I}} {\text{Cu}}_{ 2}^{\text{II}} ( {\text{H}}_{ 2} {\text{O)}}_{ 2} {\text{L}}_{ 2} {\text{Cl}}_{ 2} ]\) are theoretically investigated from the perturbation calculations of these parameters for a rhombically elongated octahedral 3d ⁹ group. The slightly larger anisotropy Δg (≈ g _// ? g_⊥) of complex 1 than complex 2 is attributed to the slightly bigger deviations of the polar angles related to the ideal value 90° and relative differences between the axial and basal Cu–O distances in the former. The axiality of the EPR signals for both systems can be illustrated as the fact that the perpendicular anisotropic contributions to X and Y components of the SHPs arising from the four basal ligands with slightly distinct bond lengths and bond angles may roughly cancel one another. The signs of hyperfine structure constants are also theoretically determined for both complexes.     

Correlation between structural and giant magnetoresistance properties of Fe–Ag nanogranular films

Fe _x Ag_1?x granular thin-films, with the atomic Fe concentration, x, ranging from 0 up to 0.5, were deposited by dc magnetron co-sputtering. The giant magnetoresistance (GMR) intensity is maximum at x _I  = 0.32, while the maximum of GMR efficiency, γ, i.e., the change of GMR intensity for a unit change of reduced squared magnetization, is observed at x _γ = 0.26. Owing to the spin-dependent scattering features, the GMR intensity and γ depend on both the concentration and the arrangement of the magnetic material. Therefore, to explain the difference between x _I and x _γ and to understand how the structural properties affect the magnetoresistive behaviour, we performed magnetization, Mössbauer and X-ray diffraction measurements as a function of x. X-ray data indicate that the granular films exhibit three different regimes: for x < 0.2, they can be described as a Fe–Ag solid solution; for 0.2 < x < 0.32 the Fe–Ag solid solution is still observed and very small Fe precipitates are found; finally, for x > 0.32, a Fe–Ag saturated solid solution is detected, containing bcc Fe clusters whose size is about 10 nm. Differently, for all the concentrations, magnetization data show the presence of Fe precipitates, whose size increases with x, and the Mössbauer investigation confirms this picture. We find that the samples grown at x = x _γ display the finest Fe dispersion within the Ag matrix, as the Fe–Ag solid solution is nearly at saturation and the Fe cluster size is of the order of a few nanometers; this arrangement possibly maximizes the magnetic/non-magnetic interface extension thus enhancing the GMR efficiency. If x is slightly increased, the increase in total Fe content compensates the GMR efficiency reduction, so the GMR intensity maximum is observed.