Growth and optical properties of Pr<Superscript>3+</Superscript>:KLu(WO<Subscript>4</Subscript>)<Subscript>2</Subscript> laser crystal: a candidate for red emission laser

A Pr³⁺:KLu(WO₄)₂ crystal with dimension of 30 × 30 × 15 mm³ was grown in the K₂W₂O₇ flux. A slice was cut from the crystal, and the polarized absorption and fluorescence spectra were measured at room temperature. Based on the J-O theory, the oscillator intensity parameters Ω _t (t = 2, 4, 6), spontaneous emission probabilities and branch ratios were estimated and good results had been obtained. Furthermore, the crystal has a relatively large emission cross-section in the region of 615–630 nm with the highest value of 14.5 × 10^?20 cm², which indicates that the crystal is good for the application in red emission laser. The emission decay time for ¹D₂ and ³P₀ multiplets was discussed. By adapting the I-H model to fit the emission decay curves, the lifetime for ¹D₂ at 607 nm and ³P₀ at 615 nm are 19.72 μs and 8.95 μs, respectively. Then the corresponding fluorescence quantum efficiencies of the two multiplets reach 83.7 % and 87.9 %, respectively. All the studies illustrate that this crystal is potential in red emission laser application.     

Lithium diffusion in Li<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>-based electrodes: a joint analysis of electrochemical impedance,cyclic voltammetry,pulse chronoamperometry,and chronopotentiometry data

In order to establish the mechanism and to determine the parameters of lithium transport in electrodes based on lithium-vanadium phosphate (Li₃V₂(PO₄)₃), the kinetic model was designed and experimentally tested for joint analysis of electrochemical impedance (EIS), cyclic voltammetry (CV), pulse chronoamperometry (PITT), and chronopotentiometry (GITT) data. It comprises the stages of sequential lithium-ion transfer in the surface layer and the bulk of electrode material’s particles, including accumulation of lithium in the bulk. Transfer processes at both sites are of diffusion nature and differ significantly, both by temporal (characteristic time, τ) and kinetic (diffusion coefficient, D) constants. PITT data analysis provided the following D values for the predominantly lithiated and delithiated forms of the intercalation material: 10^?9 and 3 × 10^?10 cm² s^?1, respectively, for transfer in the bulk and 10^?12 cm² s^?1 for transfer in the thin surface layer of material’s particles. D values extracted from GITT data are in consistency with those obtained from PITT: 3.5–5.8 × 10^?10 and 0.9–5 × 10^?10 cm² s^?1 (for the current and currentless mode, respectively). The D values obtained from EIS data were 5.5 × 10^?10 cm² s^?1 for lithiated (at a potential of 3.5 V) and 2.3 × 10^?9 cm² s^?1 for delithiated (at a potential 4.1 V) forms. CV evaluation gave close results: 3 × 10^?11 cm² s^?1 for anodic and 3.4 × 10^?11 cm² s^?1 for cathodic processes, respectively. The use of complex experimental measurement procedure for combined application of the EIS, PITT, and GITT methods allowed to obtain thermodynamic E,c dependence of Li₃V₂(PO₄)₃ electrode, which is not affected by polarization and heterogeneity of lithium concentration in the intercalate.     

AC and DC conductivity study of LiH<Subscript>2</Subscript>PO<Subscript>4</Subscript> compound using impedance spectroscopy

The lithium dihydrogen phosphate LiH₂PO₄ has been investigated by X-ray powder diffraction, scanning electron microscopy (SEM), and electrical impedance spectroscopy. The Rietveld refinements based on the XRD patterns show that the compound is crystallized in the orthorhombic system with Pna2₁ space group, and the refined unit cell parameters are a = 6.2428 Å, b = 7.6445 Å, and c = 6.873 Å. The electrical properties were studied using complex impedance spectroscopy as a function of frequency (10⁴–10⁷ Hz) at various temperatures (300–400 K). The Nyquist plots are well fitted to an equivalent circuit consisting of a series of combination of grains and inhomogeneous electrode surface effect. The frequency dependence of the conductivity is interpreted in terms of Jonscher’s law. Moreover, the near value of the activation energies obtained from the equivalent circuit and analysis of M″ confirms that the transport is through ion hopping mechanism dominated by the motion of the proton in the structure of the investigated material.     

The Dielectric properties of polypropylene/Na<Superscript>+</Superscript> montmorillonite nanoclays upon heating and cooling

The dielectric properties of polypropylene/Na⁺ montmorillonite nanoclay composites have been studied under conditions of heating and cooling. The ε(T) and tanδ(T) parameters have been measured as functions of temperature at frequencies of 10³–10⁶ Hz in the heating–cooling mode. A comparative analysis of the measured and calculated ε parameters reveals that the best agreement between the theory and experiment has been provided by the Lichteneker model. As has been established, the values of ε parameter decrease with an increase in the frequency to 6 × 10⁴ Hz, then increase, while the dielectric losses tanδ(ν) are characterized by curves with a diffused maximum at 10⁴ Hz, which increases with a rise in the nanomontmorillonite filler content. As has been shown, high montmorillonite concentrations in polypropylene favor the acceleration of dipole–relaxation processes and associated dielectric losses, as well as the whole conductivity of nanocomposites.     

Microwave dielectric properties of Ba(Zn<Subscript>1/3</Subscript>Ta<Subscript>2 / 3</Subscript>)O<Subscript>3</Subscript> for application in high power waveguide window

Higher dielectric constant, low dielectric loss and good transmission characteristicshave been the goal for developing the ceramic waveguide window for high power windowapplications. The choice of materials having high k with low dielectric lossand reduced window size is key parameters to achieve maximum microwave transmissionwithout unleashing microwave dissipation. The microwave dielectric properties ofsynthesized Ba(Zn_1/3Ta_{2 /3})O₃ (BZT) ceramics have been studied for high power windowapplications. The structural studies are correlated with microwave dielectric propertiesof BZT. The maximum values of dielectric constant ?_r =30, Q ×f₀ = 102 THz and near zero temperaturecoefficient of resonance frequency were obtained for BZT ceramics sintered at thetemperature of 1550 °Cfor 4 h. The measured results are used to design a tapered transition from air filledwaveguide to narrow (reduced width and height) dielectric filled waveguide using Heckenslinear taper at a specific frequency. The simulation result shows that the lowerreflection loss is obtained for the tapered transition of the narrow BZT window ascompared to the standard waveguide BZT window. The return loss of –34 dB is obtained forS-bandwaveguide window with a bandwidth of 675 MHz. The return loss observed in the narrow BZTwindow is –46 dB with a bandwidth of 570 MHz at a center frequency of 3.63 GHz. Most ofthe disadvantages in conventional windows will be rectified using the design of the tapertransion employing narrow waveguide window in high power applications.     

Studies on structural and electrical properties of Mg<Subscript>0. 5+y</Subscript> (Zr<Subscript>2-y</Subscript>Fe<Subscript>y</Subscript>) <Subscript>2</Subscript> (PO<Subscript>4</Subscript>) <Subscript>3</Subscript> ceramic electrolytes

The sample of Mg_{0. 5+y} (Zr_1-y Fe_y) ₂ (PO₄) ₃ (0.0 ≤y ≤0.5) was synthesized using the sol-gel method. The structures of the samples were investigated using X-ray diffraction and Fourier transform infrared spectroscopy measurement. XRD studies showed that samples had a monoclinic structure which was iso-structured with the parent compound, Mg_0.5Zr (PO₄) ₃. The complex impedance spectroscopy was carried out in the frequency range 1–6 MHz and temperature range 303 to 773 K to study the electrical properties of the electrolytes. The substitutions of Fe³⁺ with Zr⁴⁺ in the Mg_0.5Zr (PO₄) ₃ structure was introduced as an extrainterstitial Mg²⁺ ion in the modified structured. The compound of Mg_0.5+y (Zr_1-y Fe_y)₂(PO₄)₃ with y?=?0.4 gives a maximum conductivity value of 1.25?×?10^?5 S cm^?1 at room temperature and 7.18?×?10^?5 S cm^?1 at 773 K. Charge carrier concentration, mobile ion concentration, and ion hopping rate are calculated by fitting the conductance spectra to power law variation, σ _ac (ω)?=?σ _o ? +?Aω ^α . The charge carrier concentration and mobile ion concentration increases with increase of Fe³⁺ inclusion. This implies the increase in conductivity of the compounds was due to extra interstitial Mg²⁺ ions.     

Infralow-frequency dielectric response of Pb<Subscript>3</Subscript>O<Subscript>4</Subscript> polycrystalline layers

This paper reports on the results of the investigation into the frequency dispersion of the capacitance and dielectric loss in capacitor structures based on red lead Pb₃O₄. It is established that, in the range of frequencies f = 1.50 × 10^?3?0.25 Hz, the capacitance decreases and the dielectric loss tangent increases with increasing frequency. The frequency dependence of the electrical conductivity in an alternating-current electric field indicates the applicability of the hopping model of charge transfer under normal conditions. The role of a lone electron pair of Pb²⁺ cations in dielectric polarization is discussed.     

The upconversion luminescence and magnetism in Yb<Superscript>3+</Superscript>/Ho<Superscript>3+</Superscript> co-doped LaF<Subscript>3</Subscript> nanocrystals for potential bimodal imaging

Biocompatible upconversion nanoparticles with multifunctional properties can serve as potential nanoprobes for multimodal imaging. Herein, we report an upconversion nanocrystal based on lanthanum fluoride which is developed to address the imaging modalities, upconversion luminescence imaging and magnetic resonance imaging (MRI). Lanthanide ions (Yb³⁺ and Ho³⁺) doped LaF₃ nanocrystals (LaF₃ Yb³⁺/Ho³⁺) are fabricated through a rapid microwave-assisted synthesis. The hexagonal phase LaF₃ nanocrystals exhibit nearly spherical morphology with average diameter of 9.8 nm. The inductively coupled plasma mass spectrometry (ICP-MS) analysis estimated the doping concentration of Yb³⁺ and Ho³⁺ as 3.99 and 0.41%, respectively. The nanocrystals show upconversion luminescence when irradiated with near-infrared (NIR) photons of wavelength 980 nm. The emission spectrum consists of bands centred at 542, 645 and 658 nm. The stronger green emission at 542 nm and the weak red emissions at 645 and 658 nm are assigned to ⁵S₂ → ⁵I₈ and ⁵F₅ → ⁵I₈ transitions of Ho³⁺, respectively. The pump power dependence of luminescence intensity confirmed the two-photon upconversion process. The nanocrystals exhibit paramagnetism due to the presence of lanthanide ion dopant Ho³⁺ and the magnetization is 19.81 emu/g at room temperature. The nanocrystals exhibit a longitudinal relaxivity (r ₁) of 0.12 s^?1 mM^?1 and transverse relaxivity (r ₂) of 28.18 s^?1 mM^?1, which makes the system suitable for developing T2 MRI contrast agents based on holmium. The LaF₃ Yb³⁺/Ho³⁺ nanocrystals are surface modified by PEGylation to improve biocompatibility and enhance further functionalisation. The PEGylated nanocrystals are found to be non-toxic up to 50 μg/mL for 48 h of incubation, which is confirmed by the MTT assay as well as morphological studies in HeLa cells. The upconversion luminescence and magnetism together with biocompatibility enables the adaptability of the present system as a nanoprobe for potential bimodal imaging.     

Li<Superscript>+</Superscript> ion conductivity and transport properties of LiYP<Subscript>2</Subscript>O<Subscript>7</Subscript> compound

A lithium yttrium diphosphate LiYP₂O₇ was prepared by a solid-state reaction method. Rietveld refinement of the X-ray diffraction pattern suggests the formation of the single phase desired compound with monoclinic structure at room temperature. The infrared and Raman spectrum of this compound was interpreted on the basis of P₂O₇ ^4? vibrations. The AC conductivity was measured in the frequency range from 100 to 10⁶ Hz and temperatures between 473 and 673 K using impedance spectroscopy technique. The obtained results were analyzed by fitting the experimental data to the equivalent circuit model. The Cole–Cole diagram determined complex impedance for different temperatures. The angular frequency dependence of the AC conductivity is found to obey Jonscher’s relation. The temperature dependence of σ _AC could be described in terms of Arrhenius relation with two activation energies, 0.87 eV in region I and 1.36 eV in region II. The study of temperature variation of the exponent(s) reveals two conduction models: the AC conduction dependence upon temperature is governed by the correlated barrier hopping (CBH) model in region I (T < 540 K) and non-overlapping small polaron tunneling (NSPT) model in region II (T > 540 K). The near value of activation energies obtained from the equivalent circuit and DC conductivity confirms that the transport is through ion hopping mechanism dominated by the motion of the Li⁺ ion in the structure of the investigated material.     

Frequency dispersion of dielectric coefficients of layered TlGaS<Subscript>2</Subscript> single crystals

Frequency dependence of the dissipation factor tanδ, the permittivity ɛ, and the ac conductivity σ_ac across the layers in the frequency range f=5×10⁴−3×10⁷ Hz was studied in layered TlGaS₂ single crystals. A significant dispersion in tanδ was observed in the frequency range 10⁶−3×10⁷ Hz. In the range of frequencies studied, the permittivity of TlGaS₂ samples varied from 26 to 30. In the frequency range 5×10⁴−10⁶ Hz, the ac conductivity obeyed the f ^0.8 law, whereas for f>10⁶ Hz σ_ac was proportional to f ². It was established that the mechanism of the ac charge transport across the layers in TlGaS₂ single crystals in the frequency range 5×10⁴−10⁶ Hz is hopping over localized states near the Fermi level. Estimations yielded the following values of the parameters: the density of states at the Fermi level N _F=2.1×10¹⁸ eV⁻¹ cm⁻³, the average time of charge carrier hopping between localized states τ=2 μs, and the average hopping distance R=103 ?. __________ Translated from Fizika Tverdogo Tela, Vol. 46, No. 6, 2004, pp. 979–981. Original Russian Text Copyright ? 2004 by Mustafaeva.     

Luminescence characteristics of the Pr<Superscript>3+</Superscript> ion in SrB<Subscript>4</Subscript>O<Subscript>7</Subscript> and SrB<Subscript>6</Subscript>O<Subscript>10</Subscript>

Spectral and kinetic characteristics of the luminescence and luminescence excitation spectra of polycrystalline SrB₄O₇:Pr (1%) and SrB₆O₁₀:Pr (1%) samples are studied at 150–170 K. The samples show an intense luminescence band in the vicinity of 405 nm (¹ S ₀→¹ I ₆ transitions of Pr³⁺) and shorter wavelength bands also assigned to transitions from the ¹ S ₀ level. The main luminescence decay constant is ～2×10^?7 s. The excitation spectra of the ¹ S ₀ luminescence in these crystals are significantly different. The SrB₄O₇:Pr crystal shows three well-resolved bands at 6.14, 6.55, and 6.91 eV in the region of the 4f ²→4f ¹5d transitions and a complex structure in the region of interband transitions (7.1–20 eV), whereas the SrB₆O₁₀:Pr crystal shows a weakly structured band at 6.31 eV and no excitation in the region of the interband transitions. The physical mechanisms that may be responsible for the observed features of the spectra are discussed.     

Synthesis and Optical Characterization of Red-Emitting BaTa<Subscript>2</Subscript>O<Subscript>6</Subscript>:Eu<Superscript>3+</Superscript> Phosphors

Undoped and Eu³⁺ doped BaTa₂O₆ phosphors were synthesized via solid state reaction method and characterized by using XRD, SEM-EDS and photoluminescence (PL) analyses. The XRD results revealed that the crystal structure of BaTa₂O₆ allowed up to 10 mol% levels of Eu³⁺ ions due to the TTB characteristic network of adjacent octahedrals. SEM-EDS analyses confirmed the formation of BaTa₂O₆ structure and EuTaO₄ secondary phase. BaTa₂O_6:Eu³⁺ phosphors exhibited orange and red emissions at 592.2 nm and 615.7 nm in the visible region respectively. The Commission Internationale d’Eclairage (CIE) chromaticity coordinates of the BaTa₂O_6:Eu³⁺ phosphors that excited at λ _ex = 400 nm ranged from orangish-red to pinkish-red depending on increasing Eu³⁺ concentration.     

Effect of ethylene carbonate plasticizer on agar-agar: NH<Subscript>4</Subscript>Br-based solid polymer electrolytes

Proton-conducting polymer electrolytes based on biopolymer, agar-agar as the polymer host, ammonium bromide (NH₄Br) as the salt and ethylene carbonate (EC) as the plasticizer have been prepared by solution casting technique with dimethylformamide as solvent. Addition of NH₄Br and EC with the biopolymer resulted in an increase in the ionic conductivity of polymer electrolyte. EC was added to increase the degree of salt dissociation and also ionic mobility. The highest ionic conductivity achieved at room temperature was for 50 wt% agar/50 wt% NH₄Br/0.3% EC with the conductivity 3.73?×?10^?4 S cm^?1. The conductivity of the polymer electrolyte increases with the increase in amount of plasticizer. The frequency-dependent conductivity, dielectric permittivity (ε′) and modulus (M′) studies were carried out.     

Dielectric response of doped Bi<Subscript>12</Subscript>TiO<Subscript>20</Subscript>: Ru crystals in an alternating electric field

The results of examination of AC dependences of capacitance and dielectric loss tangent of sillenite Bi₁₂TiO₂₀ crystals doped with ruthenium on frequency are presented. Non-Debye dispersion of dielectric coefficients is found in the frequency interval of 5 × 10²–10⁵ Hz, and a resonance phenomenon is observed. Polarization processes in the studied samples are attributed to relaxators associated with metal–oxygen vacancies and structural elements incorporating 6s² lone-pair electrons.     

Grain size effects on dynamics of Li-ions in Li<Subscript>3</Subscript>V<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript> glass-ceramic nanocomposites

Li₃V₂(PO₄)₃ glass-ceramic nanocomposites, based on 37.5Li₂O-25V₂O₅-37.5P₂O₅ mol% glass, were successfully prepared via heat treatment (HT) process. The structure and morphology were investigated by X-ray diffraction (XRD) and scanning electron microscope (SEM). XRD patterns exhibit the formation of Li₃V₂(PO₄)₃ NASICON type with monoclinic structure. The grain sizes were found to be in the range 32–56 nm. The effect of grain size on the dynamics of Li⁺ ions in these glass-ceramic nanocomposites has been studied in the frequency range of 20 Hz–1 MHz and in the temperature range of 333–373 K and analyzed by using both the conductivity and modulus formalisms. The frequency exponent obtained from the power law decreases with the increase of temperature, suggesting a weaker correlation among the Li⁺ ions. Scaling of the conductivity spectra has also been performed in order to obtain insight into the relaxation mechanisms. The imaginary modulus spectra are broader than the Debye peak-width, but are asymmetric and distorted toward the high frequency region of the maxima. The electric modulus data have been fitted to the non-exponential Kohlrausch–Williams–Watts (KWW) function and the value of the stretched exponent β is fairly low, suggesting a higher ionic conductivity in the glass and its glass-ceramic nanocomposites. The advantages of these glass-ceramic nanocomposites as cathode materials in Li-ion batteries are shortened diffusion paths for Li⁺ ions/electrons and higher surface area of contact between cathode and electrolyte.     

Optical properties and mechanisms of current flow in Cu<Subscript>2</Subscript>ZnSnS<Subscript>4</Subscript> films prepared by spray pyrolysis

Thin films Cu₂ZnSnS₄ (up to 0.9 μm thick) with p-type conductivity and band gap E_g = 1.54 eV have been prepared by the spray pyrolysis of 0.1 M aqueous solutions of the salts CuCl₂ · 2H₂O, ZnCl₂ · 2H₂O, SnCl₄ · 5H₂O, and (NH₂)₂CS at a temperature T_S = 290°C. The electrophysical properties of the films have been analyzed using the model for polycrystalline materials with electrically active grain boundaries. The energy and geometric parameters of the grain boundaries have been determined as follows: the height of the barriers is E_b ≈ 0.045–0.048 eV, and the thickness of the depletion region is δ ≈ 3.25 nm. The effective concentrations of charge carriers p₀ = 3.16 × 10¹⁸ cm^–3 and their mobilities in crystallites μ_p = 85 cm²/(V s) have been found using the technique for determining the kinetic parameters from the absorption spectra of thin films at a photon energy hν ≈ E_g. The density of states at grain boundaries N_t = 9.57 × 10¹¹ cm^–2 has been estimated.     

Spectroscopic study of erbium-activated crystals of double calcium yttrium fluoride Ca<Subscript>0.89</Subscript>Y<Subscript>0.11</Subscript>F<Subscript>2.11</Subscript>:Er<Superscript>3+</Superscript>: I. Intensity of spectra and luminescence kinetics

Ca_0.89Y_0.11F_2.11:Er³⁺ (CYF:Er) crystals with an erbium content of 1–15 at % have been grown. The optical spectra and luminescence kinetics of CYF:Er crystals have been investigated at low (～5 K) and room temperatures. Based on an analysis of the absorption spectra at low temperature, the structure of Stark splitting of erbium levels in CYF:Er crystals is determined. Room-temperature absorption spectra are used to calculate the spectra of absorption cross sections and oscillator strengths of transitions from the erbium ground state to excited multiplets. It is shown that the absorption spectrum of CYF:Er crystals contains broad bands in the ranges of 790–815 and 965–980 nm, which correspond to the range of emission of laser diodes. For the band peaking near 967 nm, the peak absorption cross section is σ _abs ^max = 2.7 × 10^?21 cm². The intensity parameters are determined by the Judd-Ofelt method to be Ω₂ = 1.39 × 10^?20, Ω₄ = 1.34 × 10^?20, and Ω₆ = 2.24 × 10^?20 cm². The radiative transition probabilities, radiative lifetimes, and branching ratios are calculated with these values. The luminescence decay kinetics from excited erbium levels upon selective excitation is investigated and the experimental lifetimes of the 4F _9/2, ⁴ S _3/2, and ⁴ G _11/2 radiative erbium levels are determined. The dependences of multiphonon relaxation rates on the energy gap in CYF:Er crystals are obtained. The rates of nonradiative multiphonon relaxation from radiative erbium levels are determined.     

Peculiarities of magnetic,galvanomagnetic, elastic,and magnetoelastic properties of Eu<Subscript>0.55</Subscript>Sr<Subscript>0.45</Subscript>MnO<Subscript>3</Subscript>

Magnetic, elastic, magnetoelastic, transport, and magnetotransport properties of the Eu_0.55Sr_0.45MnO₃ ceramics have been studied. A break was detected in the temperature dependence of electrical resistivity ρ(T) near the temperature of the magnetic phase transformation (41 K), with the material remaining an insulator down to the lowest measurement temperature reached (ρ=10⁶ Ω cm at 4.2 K). In the interval 4.2≤T≤50 K, the isotherms of the magnetization, volume magnetostriction, and ρ were observed to undergo jumps at the critical field H_C1, which decreases with increasing T. For 50≤T≤120 K, the jumps in the above curves persist, but the pattern of the curves changes and H_C1 grows with increasing T. The magnetoresistance Δρ/ρ = (ρ _H ?ρ_H=0)/ρ _H is positive for H<H_C1 and passes through a maximum at 41 K, where Δρ/ρ = 6%. For H>H_C1, the magnetoresistance is negative, passes through a minimum near 41 K, and reaches a colossal value of 3×10⁵ % at H=45 kOe. The volume magnetostriction is negative and attains a giant value of 4.5×10^?4atH=45 kOe. The observed properties are assigned to the existence of three phases in Eu_0.55Sr_0.45MnO₃, namely, a ferromagnetic (FM) phase, in which carriers are concentrated because of the gain in s-d exchange energy, and two antiferromagnetic (AFM) phases of the A and CE types. Their fractional volumes at low temperatures were estimated to be as follows: ～3% of the sample volume is occupied by the FM phase; ～67%, by the CE-type AFM phase; and ～30%, by the A-type AFM phase.     

Spectroscopic study of double sodium-yttrium fluoride crystals doped with erbium Na<Subscript>0.4</Subscript>Y<Subscript>0.6</Subscript>F<Subscript>2.2</Subscript>:Er<Superscript>3+</Superscript>: I. Intensities of luminescence spectra and kinetics of luminescence

Na_0.4Y_0.6F_2.2:Er³⁺ (NYF:Er) crystals with an erbium concentration as high as 100 at. % (Na_0.4Er_0.6F_2.2) were grown by the Bridgman-Stockbarger method. The optical spectra were investigated at low (6 K) and room temperatures. It is shown that the absorption spectrum of NYF:Er crystals contains wide bands (790–801 and 965–980 nm) corresponding to the emission range of laser diodes. The peak absorption cross section σ_a for the band peaked at λ=970.4 nm is 0.15×10^?20 cm². On the basis of the analysis of the absorption and luminescence spectra at low (6 and 12 K) temperatures, the structure of the Stark splitting of erbium levels was determined as a structure of quasi-centers for which Stark components are inhomogeneously broadened. The oscillator strengths of the transitions from the ground state of erbium to excited multiplets were calculated from the absorption spectra measured at T=300 K, and the intensity parameters Ω_t were determined by the Judd-Ofelt method: Ω₂=1.65×10^?20 cm², Ω₄=0.56× 10^?20 cm², and Ω₆=1.01×10^?20 cm². These values of the intensity parameters were used to calculate the probabilities of radiative transitions and the branching ratios. The rates of multiphonon nonradiative transitions in NYF: Er were estimated. The luminescence decay kinetics for radiative levels of erbium ions upon their selective excitation by nanosecond laser pulses was studied. The intracenter lifetimes of radiative levels of erbium ions were determined from the luminescence kinetics upon selective ion excitation by low-intensity light in a sample with a low erbium concentration (0.5%). It is demonstrated that, with an increase in temperature from 6 to 300 K, luminescence from the ⁴ G _11/2, ² G(H)_9/2, and ⁴ F _9/2 levels is quenched as a result of multiphonon nonradiative transitions. Luminescence from the ⁴ I _9/2 level is quenched only insignificantly with increasing temperature, and no quenching of luminescence from the ⁴ I _11/2 and ⁴ I _13/2 levels is observed. The spectra of steady-state luminescence of NYF:Er(0.5–15%) crystals were investigated upon broadband excitation by UV and UV-visible lamp light and selective time-resolved laser excitation. It is shown that low-lying levels of erbium ions separated by an energy gap smaller than 2500 cm^?1 are populated via cascade mechanisms. On the basis of the results obtained, it is concluded that NYF:Er ³⁺ crystals are promising candidates for active media of tunable diode-pumped lasers.     

Charge carrier mobility in crystals of the Pb<Subscript>0.67</Subscript>Cd<Subscript>0.33</Subscript>F<Subscript>2</Subscript> superionic conductor

The frequency (ν = 10^?1–10⁷ Hz) dependences σ(ν) of the conductivity of single crystals of the Pb_0.67Cd_0.33F₂ superionic conductor with the fluorite-type structure (CaF₂) in the temperature range of 132–395 K have been studied. The dependences σ(ν) have been discussed in the framework of the hopping relaxation of ionic carriers, which are mobile anions F^?. From experimental curves σ(ν), the direct-current (dc) conductivity σ_dc and the average charge carrier hopping frequency ν_h have been determined. This has made it possible to calculate the charge carrier mobility μ_mob and charge carrier concentration n _mob in these crystals. At room temperature (293 K), the electrical parameters are σ_dc = 1.6 × 10^?4 S/cm, ν_h = 2.7 × 10⁷ Hz, μ_mob = 2.0 × 10^?7 cm²/(s V), and n _mob = 5.1 × 10²¹ cm^?3.