Synthesis of RGO/Cu8S5/PPy Composite Nanosheets with Enhanced Peroxidase‐Like Activity for Sensitive Colorimetric Detection of H2O2 and Phenol

In this paper, a novel strategy for the fabrication of reduced graphene oxide (rGO)/Cu₈S₅/polypyrrole (PPy) composite nanosheets with Cu₈S₅ nanoparticles and PPy layer anchored on the surface of rGO as peroxidase‐like nanocatalyst is reported. During the synthesis, graphene oxide (GO)/CuO composite nanosheets are prepared first and used as templates, then the sulfuration of CuO and polymerization of pyrrole are accompanied with the reduction of GO, resulting in ternary rGO/Cu₈S₅/PPy composite nanosheets. The synthesized Cu₈S₅ nanoparticles with a diameter in the range from tens to hundreds of nanometers are dispersed within PPy decorated rGO nanosheets. The resultant ternary rGO/Cu₈S₅/PPy composite nanosheets exhibit a higher peroxidase‐like catalytic activity toward the oxidation of 3,3′,5,5′‐tetramethylbenzidine in the presence of H₂O₂ than GO/CuO and rGO/CuS composite nanosheets, revealing a synergistic effect on their activity. The as‐prepared rGO/Cu₈S₅/PPy platform provides a simple colorimetric approach for the detection of H₂O₂ and phenol with a high sensitivity. This work offers a new way for the fabrication of rGO‐based nanocomposite with superior enzyme‐like activity, which displays great potential applications in biocatalysis and environmental monitoring.     

Porous WO<Subscript>3</Subscript>/reduced graphene oxide composite film with enhanced electrochromic properties

The porous WO₃/reduced graphene oxide (rGO) composite films are prepared on indium–tin oxide (ITO) glass by sol-gel method. The mixture sol combines peroxotungstic acid solution with rGO dispersion reduced by ethylene glycol (EG). The excessive EG and other organic additives are subsequently removed by annealing, which leads to the formation of porous structure. Compared with pure WO₃ film, WO₃/rGO composite film shows improved electrochromic performance because of enhanced double insertion/extraction of ions and electrons. It realizes a large optical modulation (64.2 % at 633 nm), fast switching speed (9.5 s for coloration and 4.5 s for bleaching), good cycling stability as well as reversibility.     

Synthesis of high-performance LiMnPO<Subscript>4</Subscript>/C /rGO composite via a mechanical-activation-assisted polyol process

A mechanical-activation-assisted polyol method for efficient preparation of high-performance rod-like LiMnPO₄ composite is developed. The nanosized [Mn₃(PO₄)₂·8H₂O + Li₃PO₄]/graphene oxide (GO) precursors are prepared via a mechano-chemical liquid-phase activation–assisted technique from LiH₂PO₄ and manganese powder. LiMnPO₄/reduced graphene oxide (rGO) samples are obtained by polyol process in boiling triethylene glycol (TEG) and then followed with pyrolytic carbon coating to prepare the LiMnPO₄/C/rGo nanocomposite. The characterized results prove that well-crystallized LiMnPO₄ nanorods can be successfully synthesized by polyol processing. The LiMnPO₄ nanorods have a large percentage of highly oriented (020) facets, which provide a high pore density for Li-ion insertion/extraction. Both rGO modification and further carbon coating significantly improve the conductivity and reduce the charge-transfer resistance. The optimized LiMnPO₄/C/rGO composite delivers good electrochemical performance.     

NiCoP/rGO复合材料的合成及其性能研究

以六水合氯化镍、七水合硫酸钴、氧化石墨烯(GO)和赤磷为原料,利用原位水热法,在不添加任何表面活性剂的情况下,合成了磷化钴镍/还原氧化石墨烯(NiCoP/rGO)纳米复合材料,并通过XRD、SEM、TEM、IR、Raman等对该复合材料进行了表征.结果表明,所得复合材料由NiCoP纳米颗粒和还原氧化石墨烯片层结构组成,NiCoP纳米颗粒尺寸大约为20 nm,均匀分布在rGO片层结构表面上,同时探讨了复合材料的形成过程.另外,复合材料的吸附脱除实验表明,所得复合材料对多种染料都具有非常好的吸附作用,因此,在污水处理方面有较大的应用价值.     

Enhanced Fluorescence of Graphene Oxide by Well-Controlled Au@SiO2 Core-Shell Nanoparticles

Graphene and graphene derivatives, including graphene oxide (GO) and reduced GO (rGO), have attracted remarkable attention in different fields due to their unique electronic, thermal, and mechanical properties, whereas the fluorescence property is rarely been studied. This paper reports on metal-enhanced fluorescence Au@SiO₂ composite nanoparticles adsorbed graphene oxide nanosheets, where the silica-shell is used to control the distance between gold-core and fluorophore GO, and a positively charged polyelectrolyte poly(allylamine hydrochloride) (PAH) is used to adsorb the negatively charged silica-shell and GO by layer-by-layer assembly (LbL) approach. The silica-shell around the 80 nm gold-core can be well-controlled by ending the reaction at different times. Various analytical techniques were applied to characterize the morphology and optical characters of the as-prepared particles. A more than three-fold increase of the fluorescence intensity of GO was obtained.     

Enhanced catalytic hydrogenation activity of Ni/reduced graphene oxide nanocomposite prepared by a solid-state method

A simple solid-state method has been applied to synthesize Ni/reduced graphene oxide (Ni/rGO) nanocomposite under ambient condition. Ni nanoparticles with size of 10–30 nm supported on reduced graphene oxide (rGO) nanosheets are obtained through one-pot solid-state co-reduction among nickel chloride, graphene oxide, and sodium borohydride. The Ni/rGO nanohybrid shows enhanced catalytic activity toward the reduction of p-nitrophenol (PNP) into p-aminophenol compared with Ni nanoparticles. The results of kinetic research display that the pseudo-first-order rate constant for hydrogenation reaction of PNP with Ni/rGO nanocomposite is 7.66 × 10^?3 s^?1, which is higher than that of Ni nanoparticles (4.48 × 10^?3 s^?1). It also presents superior turnover frequency (TOF, 5.36 h^?1) and lower activation energy (E_a, 29.65 kJ mol^?1) in the hydrogenation of PNP with Ni/rGO nanocomposite. Furthermore, composite catalyst can be magnetically separated and reused for five cycles. The large surface area and high electron transfer property of rGO support are beneficial for good catalytic performance of Ni/rGO nanocomposite. Our study demonstrates a simple approach to fabricate metal-rGO heterogeneous nanostructures with advanced functions.

Open image in new window

Graphical abstract ?

     

Ultrasonic-assisted synthesis of two dimensional coral-like Pd nanosheets supported on reduced graphene oxide for enhanced electrocatalytic performance

Two dimensional (2D) Pd nanosheets supported on reduced graphene oxide (Pd/rGO) were prepared through a sonochemical routine induced by cetyltrimethylammonium bromide (CTAB). Coral-like porous Pd nanosheets (Pd/rGO-u) were obtained under the sonication condition (25 kHz, 600 W, ultrasonic transducer), while square Pd nanosheets (Pd/rGO-c) were produced via traditional chemical reduction. The size of Pd nanosheets of Pd/rGO-u and Pd/rGO-c are 69.7 nm and 59.7 nm, and the thickness are 4.6 nm and 4.4 nm, respectively. The carrier GO was proved to be partially reduced to rGO with good electrical conductivity and oxygen-containing groups facilitated a good dispersion of Pd nanosheets. The interaction between GO and CTAB made the alkyl chain assembles to a 2D lamella micelles which limit the growth of Pd atoms resulting in the formation of 2D nanosheets. A high ultrasonic power promotes the reduction and the formation of porous structure. Additionally, Pd/rGO-u exhibited a favorable electrocatalytic performance toward oxygen reduction reaction (ORR) in alkaline condition, which provided a potential synthetic strategy assisted by sonication for high-performance 2D materials.     

Hydrothermal synthesis of carbon- and reduced graphene oxide-supported CoMoO4 nanorods for supercapacitor

Hybrid CoMoO₄ nanorods with carbon (C) and graphene oxide (rGO) are successfully synthesized via one-step hydrothermal process. Hybrid α-CoMoO₄ nanorods have shown excellent electrochemical performances compared to pristine CoMoO₄ in alkaline electrolyte. Specifically, CoMoO₄/C nanorod exhibits a maximum specific capacitance of 451.6 F g^?1 at the current density of 1 A g^?1, whereas CoMoO₄/rGO shows high specific capacitance of 336.1 F g^?1 at the same current density. Both the hybrid nanorods show good rate capability even at high current density of 20 A g^?1 and long-term cyclic stability. The observed electrochemical features of the hybrid CoMoO₄ nanostructure could be attributed to the presence of highly conductive carbonaceous material on unique one-dimensional nanorod microstructure which enhances the electrical conductivity of the nanorods thereby allowing faster electrolyte ion diffusion during the redox process.     

Synthesis of Li3V2(PO4)3/reduced graphene oxide cathode material with high-rate capability

The Li₃V₂(PO₄)₃/reduced graphene oxide (LVP/rGO) composite is successfully synthesized by a conventional solid-state reaction with a high yield of 10 g, which is suitable for large-scale production. Its structure and physicochemical properties are investigated using X-ray diffraction, Raman spectra, field-emission scanning electron microscopy, transmission electron microscopy, and electrochemical methods. The rGO content is as low as ~3 wt%, and LVP particles are strongly adhered to the surface of the rGO layer and/or enwrapped into the rGO sheets, which can facilitate the fast charge transfer within the whole electrode and to the current collector. The galvanostatic charge–discharge tests show that the LVP/rGO electrode delivers an initial discharge capacity of 177 mAh g^?1 at 0.5 C with capacity retention of 88 % during the 50th cycle in a wide voltage range of 3.0–4.8 V. A superior rate capability is also achieved, e.g., exhibiting discharge capacities of 137 and 117 mAh g^?1 during the 50th cycle at high C rates of 2 and 5 C, respectively.     

Effects of green laser fluence on the characteristics of graphene nanosheets synthesized by laser ablation method in liquid nitrogen medium

We have studied the effects of laser fluence on the characteristics of graphene nanosheets produced by pulsed laser ablation technique. In this work, The second harmonic of a Q-switched Nd:YAG laser at 532 nm wavelength and 5 Hz repetition rate with different laser fluences in the range of 0.5–1.8 J/cm² was used to irradiate the graphite target in liquid nitrogen medium. The products of ablation were characterized using Fourier transform infrared spectroscopy, field emission scanning electron microscopy, X-ray diffraction pattern, UV–Vis absorption spectroscopy, Raman spectrum and transmission electron microscopy. The Raman spectroscopy indicates that the quality of the graphene nanosheets was decreased while their structure defects were increased as the laser fluence was increased from 0.5 to 1.4 J/cm². Our results suggest that the amount of defects and the number of layers in graphene nanosheets can be changed by adjusting the laser fluence. This study could be a useful guidance for producing of high quality of graphene nanosheets by laser ablation method.     

Development of monodispersed MnCO<Subscript>3</Subscript>/graphene nanosheet composite as anode for lithium-ion battery by hydrothermal synthesis

A unique monodispersed MnCO₃/graphene nanosheet composite is synthesized by a simple one-step hydrothermal method and used as anode of lithium-ion battery. X-ray diffraction patterns show the typical rhombohedral structure of MnCO₃. A transmission electron micrograph reveals that MnCO₃ is evenly distributed on the graphene nanosheet surface with a uniform diameter of 100 nm. Electrochemical performance results show that the specific discharge capacities of MnCO₃/graphene nanosheet composite remain above 1015.9 mAh g^?1 at a rate of 0.2 C after 85 cycles in the potential window of 0.01–2.0 V and even at a high rate of 1.0 C this parameter remains at 683.5 mAh g^?1 after 100 cycles. Thus, the composite also exhibits favorable rate performance. The excellent reversible capacities are attributed to the highly dispersed and large nanosheet structure of the composite, which may not only facilitate the fast transport of Li⁺ ions between the electrode and electrolyte but also provide enough surfaces to accommodate extra Li⁺ ions that contribute to partial interfacial storage capacities. Additionally, graphene nanosheet can effectively improve electrical conductivity of the composite. Therefore, MnCO₃/graphene nanosheet composite can be a great potential anode material for lithium-ion batteries.     

Solution-processed Au@rGO/GaN nanorods hybrid-structure for self-powered UV,visible photodetector and CO gas sensors

Although metal nanoparticles (NPs) have been widely reported, Au NPs functionalized reduced graphene oxide (rGO)/GaN nanorods (NRs) for multi-functional applications are rarely discussed. The rGO is a well known transparent electrode and has been considering an alternative electrode to ITO in the current optoelectronic community. In this work, Au NPs functionalized rGO (Au@rGO)/GaN NRs hybrid structure probed for photodetector and CO gas sensing applications. The hybrid structure was characterized by scanning electron microscopy, transmission electron microscope, current-voltage characteristics, photo conductivity, and gas sensor measurements. The Au@rGO/GaN NRs showed higher photoresponsivity (λ = 382 nm, 516 nm) compared to rGO/GaN NRs at room temperature. The rising and falling times of Au@rGO/GaN NRs are faster than that of rGO/GaN NRs. The hybrid structure Au@rGO/GaN NRs exhibited high CO gas response compared to rGO/GaN NRs at room temperature (∼38% to the 20 ppm). Au NPs played an important role in terms of electronic and chemical changes in the hybrid structure for improving both photodetectors the CO gas response. Such a multi-functional hybrid device is an interest of various room temperature applications.     

Enhanced optical limiting effect in fluorine-functionalized graphene oxide

Nonlinear optical absorption of fluorine-functionalized graphene oxide (F-GO) solution was researched by the open-aperture Z-scan method using 1064 and 532 nm lasers as the excitation sources. The F-GO dispersion exhibited strong optical limiting property and the fitted results demonstrated that the optical limiting behavior was the result of a two-photon absorption process. For F-GO nanosheets, the two-photon absorption coefficients at 1064 nm excitation are 20% larger than the values at 532 nm excitation and four times larger than that of pure GO nanosheets. It indicates that the doping of fluorine can effectively improve the nonlinear optical property of GO especially in infrared waveband, and fluorine-functionalized graphene oxide is an excellent nonlinear absorption material in infrared waveband.     

siRNA-loaded PEGylated porous silicon nanoparticles for lung cancer therapy

The BiPO₄/reduced graphene oxide (RGO) nanocomposites were prepared by a facile solvothermal approach. The prepared samples were characterized with Fourier transform infrared spectroscopy, X-ray diffraction, scanning electron microscopy, transmission electron microscopy, UV–vis diffuse reflectance spectroscopy, electrochemical impedance spectra, and Mott–Schottky and the photoluminescence spectra. A large quantity of BiPO₄ nanoparticles with sizes of ca. 150 nm were well dispersed on the RGO nanosheets. The absorbance of the BiPO₄/RGO nanocomposites is largely enhanced in the range of 400–800 nm compared with that of BiPO₄, and the BiPO₄/RGO showed better photocatalytic activities under simulated sunlight irradiation than the BiPO₄ nanocrystals.     

Synthesis of graphene/nickel oxide composite with improved electrochemical performance in capacitors

A novel reduced graphene oxide/NiO nanosheet composite (r-GO/NiO) (ca. 75 % NiO in weight) was synthesized by a facile two-step method, where the NiO nanosheets were decorated with some voids. The composite was characterized by using X-ray diffraction, transmission electron microscopy, thermal gravimetric analysis, and Raman spectroscopy. The electrochemical properties of the composite were investigated by cyclic voltammetry, galvanostatic charge, and discharge measurements. The results show that the r-GO/NiO composite exhibits a stable average specific capacitance of ca. 1,139 F g^?1 (at 0.5 A g^?1) during 1,000 charge–discharge cycles, suggesting that the r-GO/NiO composite is a potential supercapacitor material. The main correlation between the electrochemical performance and the structure of the materials was studied, and the formation process of the composite was also discussed.     

Flower-like MoS<Subscript>2</Subscript> supported on three-dimensional graphene aerogels as high-performance anode materials for sodium-ion batteries

Flower-like MoS₂ supported on three-dimensional graphene aerogel (MoS₂/GA) composite has been prepared by a facile hydrothermal method followed by subsequent heat-treatment process. Each of MoS₂ microflowers is surrounded by the three-dimensional graphene nanosheets. The MoS₂/GA composite is applied as an anode material of sodium-ion batteries (SIBs) and it exhibits high initial discharge/charge capacities of 562.7 and 460 mAh g^?1 at a current density of 0.1 A g^?1 and good cycling performance (348.6 mAh g^?1 after 30 cycles at 0.1 A g^?1). The good Na⁺ storage properties of the MoS₂/GA composite could be attributed to the unique structure which flower-like MoS₂ are homogeneously and tightly decorated on the surface of three-dimensional graphene aerogel. Our results demonstrate that as-prepared MoS₂/GA composite has a great potential prospect as anodes for SIBs.     

Synthesis of PANI/rGO composite as a cathode material for rechargeable lithium-polymer cells

Graphene oxide (GO) was synthesized by an improved Hummers method and then reduced with NaBH₄; GO became rGO with regular layered structure. Polyaniline (PANI)/rGO composite was prepared by a adsorption double oxidant method with rGO as a template. Some physical characterization methods (Fourier transform infrared spectroscopy analysis, X-ray diffraction, scanning electron microscope, and transmission electron microscope) were used to analyze the morphology and crystallinity of the composite. The electrochemical properties were characterized by cyclic voltammetry, impedance spectroscopy, galvanostatic charge/discharge, and rate capability. The first discharge specific capacity of the rPANI/rGO and PANI/rGO was 181.2 and 147.8 mAh/g. After 100 cycles, the capacity retention rate was still 90.2 and 88.9% separately, and the coulombic efficiency of batteries is close to 100%. These results demonstrate the composite has exciting potentials for the cathode material of lithium-ion battery.     

Solution processable reduced graphene oxide decorated ATO electrode for organic solar cells

A novel concept based on the use of solutions containing already qualified crystalline antimony-doped tin oxide SnO₂:Sb (ATO) nanoparticles has been developed. ATO nanoparticles are decorated by reduced graphene oxide (rGO) through a hydrothermal synthesis method. The electrical and optical properties of the graphene oxide films are investigated systematically. The sheet resistance (R _□) of the ATO–rGO films decreases with the increase in the rGO content in the precursor solution. The R _□ can be decreased after the ATO–rGO films annealing in the air for 1 h and can be further decreased by depositing Au on the surface of the films. The optimum property of the ATO–rGO film shows that the R _□ is 80 Ω/□ and the transmittance is about 70 %. The ATO–rGO films are used as the anode of the organic solar cells. The anode film impact on the performance of the devices is studied. Finally, the power conversion efficiency (PCE) of the device based on the poly-(3-hexylthiophene): [6, 6]-phenyl C61-butyric acid methyl ester (PCBM) blended is 1.85 %, and the PCE of the device based on the poly-benzo[1,2-b:4,5-b′] dithio-phene thieno[3,4-b] thiophene:PCBM blended is 3.4 %.     

Hydrolysis precipitation synthesis of monodisperse α-Fe2O3 nanorods/graphene oxide nanocomposites

A nanocomposite of graphene oxide supported by monodisperse rod-like α-Fe₂O₃ nanocrystals (GO/α-Fe₂O₃ nanocomposites) has been fabricated through a simple hydrolysis precipitation route in a water–ethanol system. The nanocomposites were characterized by X-ray diffraction, Raman spectra and transmission electron microscopy, respectively. The GO/α-Fe₂O₃ nanocomposites are GO nanosheets decorated randomly by α-Fe₂O₃ nanorods with diameters in the range of 3–5 nm and lengths of 20–30 nm, while only hollow α-Fe₂O₃ microspheres constructed by the radically oriented single-crystalline nanorods are observed in the absence of GO. Compared with pure α-Fe₂O₃ nanoparticles, α-Fe₂O₃/GO nanocomposites exhibited excellent photocatalytic activity as evident from the degradation of rhodamine B in water under UV irradiation. The superior photocatalytic activity performance of α-Fe₂O₃/GO nanocomposites could be attributed to the synergetic effect between the conducting GO nanosheets and monodisperse α-Fe₂O₃ nanorods.     

二硒化铁/还原氧化石墨烯的制备及其在染料敏化太阳能电池中的应用

通过水热反应合成出二硒化铁/还原氧化石墨烯(FeSe₂/rGO)复合材料, 并将其作为对电极材料应用于染料敏化太阳能电池(DSSC). 利用X射线衍射、拉曼光谱、场发射扫描电子显微镜和高分辨透射电子显微镜对FeSe₂/rGO的结构和形貌进行了表征. 利用循环伏安法、电化学阻抗谱和Tafel曲线测试分析了FeSe₂/rGO对电极的电催化活性. 结果表明: FeSe₂呈纳米棒结构, 长度在100-200 nm之间, 且紧密地附着在rGO 的表面, FeSe₂/rGO对电极对I₃^-的还原具有很好的催化活性. 电池的J-V曲线测试显示: 基于FeSe₂/rGO对电极的DSSC的转换效率达到了8.90%, 相比基于单纯的FeSe₂对电极的DSSC(7.91%)和rGO对电极的DSSC(5.24%)都有了显著提高, 甚至优于铂对电极的DSSC(8.52%).