LiFePO<Subscript>4</Subscript> composites decorated with nitrogen-doped carbon as superior cathode materials for lithium-ion batteries

The development of methods to synthesize electrode materials can improve the performance of lithium ion storage. In this study, a facile and low-cost approach is employed to synthesize LiFePO₄ (LFP/NC) hybrid materials decorated with nitrogen-doped carbon nanomaterials (NC). Melamine was used as nitrogen and carbon source with an NC to LFP ratio of 3.19%. As electrode materials for lithium ion batteries (LIBs), the LFP/NC composites exhibit an optimum performance with a high rate capacity of 144.6 mAh·g^?1 at 1 C after 500 cycles without apparent loss. The outstanding cycling stability may be attributed to the synergetic effects of well-crystallized particles and NC layers.     

Synthesis and electrochemical performance of LiFePO<Subscript>4</Subscript>/C cathode materials from Fe<Subscript>2</Subscript>O<Subscript>3</Subscript> for high-power lithium-ion batteries

Carbon-coated olivine-structured LiFePO₄/C composites are synthesized via an efficient and low-cost carbothermal reduction method using Fe₂O₃ as iron source at a relative low temperature (600 °C). The effects of two kinds of carbon sources, inorganic (acetylene black) and organic (sucrose), on the structures, morphologies, and lithium storage properties of LiFePO₄/C are evaluated in details. The particle size and distribution of the carbon-coated LiFePO₄ from sucrose (LiFePO₄/SUC) are more uniform than that obtained from acetylene black (LiFePO₄/AB). Moreover, the LiFePO₄/SUC nanocomposite shows superior electrochemical properties such as high discharge capacity of 156 mAh g^?1 at 0.1 C, excellent cyclic stability, and rate capability (78 mAh g^?1 at 20 C), as compared to LiFePO₄/AB. Cyclic voltammetric test discloses that the Li-ion diffusion, the reversibility of lithium extraction/insertion, and electrical conductivity are significantly improved in LiFePO₄/SUC composite. It is believed that olivine-structured LiFePO₄ decorated with carbon from organic carbon source (sucrose) using Fe₂O₃ is a promising cathode for high-power lithium-ion batteries.     

Improved of cathode performance of LiFePO<Subscript>4</Subscript>/C composite using different carboxylic acids as carbon sources for lithium-ion batteries

Among the several materials under development for use as a cathodes in lithium-ion batteries olivine-type LiFePO₄ is one of the most promising cathode material. However, its poor conductivity and low lithium-ion diffusion limits its practical application. In this study, we report seven different carboxylic acids used to synthesize LiFePO₄/C composite, and influences of carbon sources on electrochemical performance were intensively studied. The structure and electrochemical properties of the LiFePO₄/C were characterized by X-ray diffraction, scanning electron microscopy, electrical conductivity, and galvanostatic charge–discharge measurements. Among the materials studied, the sample E with tartaric acid as carbon source exhibited the best cell performance with a maximum discharge capacity of 160 mAh g⁻¹ at a 0.1 C-rate. The improved electrochemical properties were attributed to the reduced particle size and enhanced electrical contacts by carbon.     

Effect of carbon coating on the electrochemical performance of LiFePO<Subscript>4</Subscript>/C as cathode materials for aqueous electrolyte lithium-ion battery

Organic electrolyte is widely used for lithium-ion rechargeable batteries but might cause flammable fumes or fire due to improper use such as overcharge or short circuit. That weakness encourages the development of tools and materials which are cheap and environmental friendly for rechargeable lithium-ion batteries with aqueous electrolyte. Lithium iron phosphate (LiFePO₄) with olivine structure is a potential candidate to be used as the cathode in aqueous electrolyte lithium-ion battery. However, LiFePO₄ has a low electronic conductivity compared to other cathodes. Conductive coating of LiFePO₄ was applied to improve the conductivity using sucrose as carbon source by heating to 600 °C for 3 h on an Argon atmosphere. The carbon-coated LiFePO₄ (LiFePO₄/C) was successfully prepared with three variations of the weight percentage of carbon. From the cyclic voltammetry, the addition of carbon coatings could improve the stability of cell battery in aqueous electrolyte. The result of galvanostatic charge/discharge shows that 9 % carbon exhibits the best result with the first specific discharge capacity of 13.3 mAh g^?1 and capacity fading by 2.2 % after 100 cycles. Although carbon coating enhances the conductivity of LiFePO₄, excessive addition of carbon could degrade the capacity of LiFePO₄.     

Nitrogen-doped carbon nanofiber decorated LiFePO<Subscript>4</Subscript> composites with superior performance for lithium-ion batteries

Nitrogen-doped carbon nanofiber (NCNF) decorated LiFePO₄ (LFP) composites are synthesized via an in situ hydrothermal growth method. Electrochemical performance results show that the embedded NCNF can improve electron and ion transfer, thereby resulting in excellent cycling performance. The as-prepared LFP and NCNF composites exhibit excellent electrochemical properties with discharge capacities of 188.9 mAh g^?1 (at 0.2 C) maintained at 167.9 mAh g^?1 even after 200 charge/discharge cycles. The electrode also presents a good rate capability of 10 C and a reversible specific capacity as high as 95.7 mAh g^?1. LFP composites are a potential alternative high-performing anode material for lithium ion batteries.     

Synthesis,structure, and electrochemistry of Ag-modified LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> cathode materials for lithium-ion batteries

The composite of silver-modified lithium manganese oxide were prepared using thermal decomposition method of different mole ratio. Structural characterization was carried out by X-ray diffraction (XRD). XRD analysis revealed different patterns as the content of the dopant in the spinel increases. Phase analysis shows that Ag particles were dispersed on the LiMn₂O₄ surface instead of entering the spinel structure. On the other hand, the electrochemical behavior of cathode powder was examined by using two-electrode test cells consisting of a cathode, metallic lithium as anode, and a solid polymer electrolyte of 0.87PEO-0.13LiCF₃SO₃-0.10DBP. According to the electrochemical tests results, the influence of the Ag additive content on the electrochemical properties of Ag/LiMn₂O₄ composites is clearly shown.     

Surfactant-assisted synthesis of LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> particles as high-rate and long-life cathode materials for lithium-ion batteries

Herein, we reported the synthesis of uniform LiMn₂O₄ submicroparticles by surfactant-assisted preparation of spherical MnCO₃ precursor followed by solid-state reaction. Polyethylene glycol (Mw = 1000) was used as surfactant to control the morphology and size of the MnCO₃ precursor as well as the MnO₂ intermediate and LiMn₂O₄ product. The influence of particle size, homogeneity, and crystallinity on the electrochemical performance of LiMn₂O₄ was intensively investigated. The test results indicate that the LiMn₂O₄ sample using polyethylene glycol with weight as 10% of reactants shows the best rate capability and long-term cyclability. Due to the homogeneous particles with the average size of ca. 250 nm and high crystallinity, the discharge capacities are as high as 125, 118, 114, and 100 mAh g^?1 at 1, 10, 20, and 50 C rates, respectively, along with high capacity retention of 74% after 1000 cycles at 20 C.     

Influence of carbon additive on the properties of spherical Li<Subscript>4</Subscript>Ti<Subscript>5</Subscript>O<Subscript>12</Subscript> and LiFePO<Subscript>4</Subscript> materials for lithium-ion batteries

Preparing spherical particles with carbon additive is considered as one effective way to improve both high rate performance and tap density of Li₄Ti₅O₁₂ and LiFePO₄ materials. Spherical Li₄Ti₅O₁₂/C and LiFePO₄/C composites are prepared by spray-drying–solid-state reaction method and controlled crystallization–carbothermal reduction method, respectively. The X-ray diffraction characterization, scanning electron microscope, Brunauer–Emmett–Teller, alternating current impedance analyzing, tap density testing, and electrochemical property measurements are investigated. After hybridizing carbon with a proper quantity, the crystal grain size of active materials is remarkably decreased and the electrochemical properties are obviously improved. The Li₄Ti₅O₁₂/C and LiFePO₄/C composites prepared in this work are spherical. The tap density and the specific surface area are as high as 1.71 g cm⁻³ and 8.26 m² g⁻¹ for spherical Li₄Ti₅O₁₂/C, which are 1.35 g cm⁻³ and 18.86 m² g⁻¹ for spherical LiFePO₄/C powders. Between 1.0 and 3.0 V versus Li, the reversible specific capacity of the Li₄Ti₅O₁₂/C is more than 150 mAh g⁻¹ at 1.0-C rate. Between 2.5 and 4.2 V versus Li, the reversible capacity of the LiFePO₄/C is close to 140 mAh g⁻¹ at 1.0-C rate.     

ZnO-coated LiMn<Subscript>2</Subscript>O<Subscript>4</Subscript> cathode material for lithium-ion batteries synthesized by a combustion method

ZnO-coated LiMn₂O₄ cathode materials were prepared by a combustion method using glucose as fuel. The phase structures, size of particles, morphology, and electrochemical performance of pristine and ZnO-coated LiMn₂O₄ powders are studied in detail by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), galvanostatic charge-discharge test, and X-ray photoelectron spectroscopy (XPS). XRD patterns indicated that surface-modified ZnO have no obvious effect on the bulk structure of the LiMn₂O₄. TEM and XPS proved ZnO formation on the surface of the LiMn₂O₄ particles. Galvanostatic charge/discharge test and rate performance showed that the ZnO coating could improve the capacity and cycling performance of LiMn₂O₄. The 2 wt% ZnO-coated LiMn₂O₄ sample exhibited an initial discharge capacity of 112.8 mAh g^?1 with a capacity retention of 84.1 % after 500 cycles at 0.5 C. Besides, a good rate capability at different current densities from 0.5 to 5.0 C can be acquired. CV and EIS measurements showed that the ZnO coating effectively reduced the impacts of polarization and charge transfer resistance upon cycling.     

Synthesis and electrochemical performance of carbon-coated LiMnBO<Subscript>3</Subscript> as cathode materials for lithium-ion batteries

Carbon-coated LiMnBO₃/C is synthesized by a sol-gel method using polyethylene glycol 6000 (PEG-6000) as carbon source. The influences of different sintering temperatures on the crystal structure, morphology, and electrochemical performance of LiMnBO₃/C composites are investigated. XRD results indicate that the samples consist of the monoclinic phase LiMnBO₃ (m-LiMnBO₃) and the hexagonal phase LiMnBO₃ (h-LiMnBO₃), and the amount of m-LiMnBO₃ is reduced and the h-LiMnBO₃ is increased with the increasing sintering temperature. The particle size of the samples is about 500 nm, and the surface of the particles is coated with a thick amorphous carbon layer. The LiMnBO₃/C synthesized at 750 °C exhibits the initial discharge capacities of 213.4, 170.8, and 109.7 mAh g^?1 at 0.025, 0.05, and 0.5 C rates, respectively, and shows better cycling performance than that of bare LiMnBO₃. The enhanced electrochemical performance might be largely attributed to the uniformly coated carbon layers from decomposition of the PEG-6000.     

Synthesis and electrochemical performance of carbon-coated LiCoBO<Subscript>3</Subscript> as cathode materials for lithium-ion batteries

Carbon-coated LiCoBO₃ (LiCoBO₃/C) is prepared by sol-gel method and polyethylene glycol 6000 (PEG-6000) is chosen as carbon source. The LiCoBO₃/C sample exhibits an initial discharge capacity of 76.7 mAh g^?1 at 0.1 C, and it can deliver a discharge capacity of 65.9 mAh g^?1 after 50 cycles, while the LiCoBO₃ sample only presents a first discharge capacity of 34.3 and 16.8 mAh g^?1 at the 50th cycle, LiCoBO₃/C sample shows better cycling performance than that of LiCoBO₃. The improved electrochemical properties could be mainly ascribed to the conductive carbon network and the reduced particle size of the LiCoBO₃ powders. Electrochemical impedance spectroscopy (EIS) results confirm that carbon coating decreases the charge transfer resistance and improve the electrochemical reaction kinetics.     

Effects of yttrium ion doping on electrochemical performance of LiFePO<Subscript>4</Subscript>/C cathodes for lithium-ion battery

The olivine-type LiFe_1-x Y _x PO₄/C (x?=?0, 0.01, 0.02, 0.03, 0.04, 0.05) products were prepared through liquid-phase precipitation reaction combined with the high-temperature solid-state method. The structure, morphology, and electrochemical performance of the samples were characterized by X-ray diffraction (XRD), scanning electron microscope (SEM), transmission electron microscope (TEM), energy-dispersive spectroscopy (EDS), galvanostatic charge-discharge, cyclic voltammetry, and electrochemical impedance spectroscopy (EIS). We found that the small amount of Y³⁺ ion-doped can keep the microstructure of LiFePO₄, modify the particle morphology, decrease charge transfer resistance, and enhance exchange current density, thus enhance the electrochemical performance of the LiFePO₄/C. However, the large doping content of Y³⁺ ion cannot be completely doped into LiFePO₄ lattice, but existing partly in the form of YPO₄. The electrochemical performance of LiFePO₄/C was restricted owing to YPO₄. Among all the doped samples, LiFe_0.98Y_0.02PO₄/C showed the best electrochemical performance. The LiFe_0.98Y_0.02PO₄/C sample exhibited the initial discharge capacity of 166.7, 155.8, 148.2, 139.8, and 121.1 mAh g^?1 at a rate of 0.2, 0.5, 1, 2, and 5 C, respectively. And, the discharge capacity of the material was 119.6 mAh g^?1 after 100 cycles at 5 C rates.     

Cycle-life and degradation mechanism of LiFePO<Subscript>4</Subscript>-based lithium-ion batteries at room and elevated temperatures

Cycle-life tests of commercial 22650-type olivine-type lithium iron phosphate (LiFePO₄)/graphite lithium-ion batteries were performed at room and elevated temperatures. A number of non-destructive electrochemical techniques, i.e., capacity recovery using a small current density, electrochemical impedance spectroscopy, and differential voltage and differential capacity analyses, were performed to deduce the degradation mechanism of these batteries. To further characterize their internal materials, we disassembled the batteries, and material analyses were performed. All results indicated that loss in active lithium was the main reason for battery aging, and the cells showed diverse recession of active materials at different temperatures. In addition, high discharge rate and growing impedance lead to a capacity fall down at 25 °C at approximately 300–500 cycles.     

Synthesis and characterization of pristine Li<Subscript>2</Subscript>MnSiO<Subscript>4</Subscript> and Li<Subscript>2</Subscript>MnSiO<Subscript>4</Subscript>/C cathode materials for lithium ion batteries

The cathode materials, pristine Li₂MnSiO₄ and carbon-coated Li₂MnSiO₄ (Li₂MnSiO₄/C), were synthesized by the sol–gel method. Power X-ray diffraction and scanning electron microscopy analyses show that the presence of carbon during synthesis can weaken the formation of impurities in the final product and decrease the particle size of the final product. The effects of carbon coating on electrochemical characteristics were investigated by galvanostatic cycling test and electrochemical impedance spectroscopy. The galvanostatic cycling test results indicate that Li₂MnSiO₄/C cathode exhibits better electrochemical performance with an initial discharge capacity of 134.4 mAh g⁻¹ and a capacity retention of 63.9 mAh g⁻¹ after 20 cycles. Electrochemical impedance analyses confirm that carbon coating can increase electronic conductivity, which results in good electrochemical performance of Li₂MnSiO₄/C cathode. The two semicircles and the large arc obtained in this study can be attributed to the migration of lithium ions through the solid electrolyte interphase films, the electronic properties of the material, and the charge transfer step, respectively.     

Polyol technique synthesis of Nb<Subscript>2</Subscript>O<Subscript>5</Subscript> coated on LiFePO<Subscript>4</Subscript> cathode materials for Li-ion storage

A novel approach has been made to tailor Niobium pentoxide (Nb₂O₅) as a coating material on the surface of lithium iron phosphate (LiFePO₄) via a facile polyol technique. The coating content was optimized at 1 wt%. The superficial coating demonstrated superior discharge capacity than the pristine LiFePO₄. However, increasing the coating content further would result in a capacity loss. This may be due to the electrochemical inactiveness that increases with the content of the coating material, and 1 wt% of Nb₂O₅-coated LiFePO₄ sample exhibits initial discharge capacity of 163 mAh g^?1 at a current of 0.1 C and retains a stable discharge capacity of 143 mAh g^?1 up to 400 cycles at 1 C rate with a coulombic efficiency of 98%.

Open image in new window

Graphical abstract ?

     

Advanced LiTi<Subscript>2</Subscript>(PO<Subscript>4</Subscript>)<Subscript>3</Subscript>/C anode by incorporation of carbon nanotubes for aqueous lithium-ion batteries

Inferior rate capability is a big challenge for LiTi₂(PO₄)₃ anode for aqueous lithium-ion batteries. Herein, to address such issue, we synthesized a high-performance LiTi₂(PO₄)₃/carbon/carbon nanotube (LTP/C/CNT) composite by virtue of high-quality carbon coating and incorporation of good conductive network. The as-prepared LTP/C/CNT composite exhibits excellent rate performance with discharge capacity of 80.1 and 59.1 mAh g^?1 at 10 C and 20 C (based on the mass of anode, 1 C = 150 mA g^?1), much larger than that of the LTP/C composite (53.4 mAh g^?1 at 10 C, and 31.7 mAh g^?1 at 20 C). LTP/C/CNT also demonstrates outstanding cycling stability with capacity retention of 83.3 % after 1000 cycles at 5 C, superior to LTP/C without incorporation of CNTs (60.1 %). As verified, the excellent electrochemical performance of the LTP/C/CNT composite is attributed to the enhanced electrical conductivity, rapid charge transfer, and Li-ion diffusion because of the incorporation of CNTs.     

Effect of doping functionalized MWCNTs on the electrochemical performances of Li<Subscript>2</Subscript>CoSiO<Subscript>4</Subscript> for lithium-ion batteries

We report the synthesis of Li₂CoSiO₄ by the sol-gel method and the preparation of a composite electrode by incorporating functionalized multi-walled carbon nanotubes (fn. MWCNTs) as conductive additive. XRD pattern of the composite confirms the structural stability of Li₂CoSiO₄ even after the addition of fn. MWCNTs. SEM images of the composite reveal the presence of conductive bridges formed by MWCNTs between the submicron-sized particles of Li₂CoSiO₄. The cyclic voltammograms of the composite cathode show redox peaks with higher current density than pure Li₂CoSiO₄ and the current density increases with increase in sweep rate. The diffusion coefficient of lithium has been improved by the addition of fn. MWCNTs from 1 × 10^?14 to 8 × 10^?14 cm²/s as calculated using Randles-Sevcik equation. The charge-discharge cycling performance of both pure Li₂CoSiO₄ and composite cathode has been discussed.     

Enhanced electrochemical properties of ZnO-coated LiMnPO<Subscript>4</Subscript> cathode materials for lithium ion batteries

We demonstrated the effect of ZnO (different wt%)-coated LiMnPO₄-based cathode materials for electrochemical lithium ion batteries. ZnO-coated LiMnPO₄ cathode materials were prepared by the sol-gel method. X-ray diffraction (XRD) analysis indicates that there is no change in structure caused by ZnO coating, and field emission scanning electron microscopy (FESEM) images depict the closely packed particles. Galvanostatic charge-discharge tests show the ZnO-coated LiMnPO₄ sample has an enhanced electrochemical performance as compared to pristine LiMnPO₄. The 2 wt% of ZnO-based LiMnPO₄ exhibited maximum discharge capacity of 102.2 mAh g^?1 than pristine LiMnPO₄ (86.2 mAh g^?1) and 1 wt% of ZnO-based LiMnPO₄ (96.3 mAh g^?1). The maximum cyclic stability of 96.3 % was observed in 2 wt% of ZnO-based LiMnPO₄ up to 100 cycles. This work exhibited a promising way to develop a surface-modified LiMnPO₄ using ZnO for enhanced electrochemical performance in device application.     

LiFePO<Subscript>4</Subscript>/C with high capacity synthesized by carbothermal reduction method

The olivine-type LiFePO₄/C cathode materials were prepared via carbothermal reduction method using cheap Fe₂O₃ as raw material and different contents of glucose as the reducing agent and carbon source. Their structural and morphological properties were investigated by X-ray diffraction, scanning electron microscope, transmission electron microscope, and particle size distribution analysis. The results demonstrated that when the content of the carbon precursor of glucose was 16 wt.%, the synthesized powder had good crystalline and exhibited homogeneous and narrow particle size distribution. Even and thin coating carbon film was formed on the surface of LiFePO₄ particles during the pyrolysis of glucose, resulting in the enhancement of the electronic conductivity. Electrochemical tests showed that the discharge capacity first increased and then decreased with the increase of glucose content. The optimal sample synthesized using 16 wt.% glucose as carbon source exhibited the highest discharge capacity of 142 mAh g⁻¹ at 0.1C rate with the capacity retention rate of 90.4% and 118 mAh g⁻¹ at 0.5C rate.     

Kinetic study on LiFePO<Subscript>4</Subscript>-positive electrode material of lithium-ion battery

LiFePO₄-positive electrode material was successfully synthesized by a solid-state method, and the effect of storage temperatures on kinetics of lithium-ion insertion for LiFePO₄-positive electrode material was investigated by electrochemical impedance spectroscopy. The charge-transfer resistance of LiFePO₄ electrode decreases with increasing the storage temperatures. This suggests that it has a high electrochemical activity at high temperature. The diffusion coefficient of lithium ion is greatly increased with increasing the storage temperatures, indicating that the kinetics of Li⁺ and electron transfer into the electrodes were much fast at high storage temperature.