Influence of graphene coating on supercapacitive behavior of sandwich-like N- and O-enriched porous carbon/graphene composites in aqueous and organic electrolytes

Polyacrylonitrile nanofiber cloth coated with graphene oxide was carbonized and activated to fabricate nitrogen- and oxygen-enriched porous carbon/graphene (NAC@Gr) sandwich-like composites. The influence of graphene coating on the microstructure, surface composition, and supercapacitive performance of the as-prepared composites was investigated. The results indicated that significantly enhanced energy storage capability can be achieved due to the high specific surface area, optimized pore structure, and surface functionality. The composites show both high gravimetric and volumetric specific capacitances, for example, 380 F g^?1 (178 F cm^?3) at 0.1 A g^?1 in 6 M KOH and 228 F g^?1 (125 F cm^?3) at 1 A g^?1 in 1 M TEABF₄/AN electrolyte. The assembled symmetric supercapacitors exhibit high energy density, high power density, excellent cycling stability, and high-rate performance.     

Study on the effect of PEG in ionic transport for CMC-NH<Subscript>4</Subscript>Br-based solid polymer electrolyte

The present study investigates the ion transport properties and structural analysis of plasticized solid polymer electrolytes (SPEs) based on carboxymethyl cellulose (CMC)-NH₄Br-PEG. The SPE system was successfully prepared via solution casting and has been characterized by using electrical impedance spectroscopy (EIS), Fourier transform infrared (FTIR) spectroscopy, and x-ray diffraction (XRD) technique. The highest conductivity of the SPE system at ambient temperature (303 K) was found to be 1.12?×?10^?4 S/cm for un-plasticized sample and 2.48?×?10^?3 S cm^?1 when the sample is plasticized with 8 wt% PEG. Based on FTIR analysis, it shows that interaction had occurred at O–H, C=O, and C–O moiety from CMC when PEG content was added. The ionic conductivity tabulation of SPE system was found to be influenced by transport properties and amorphous characteristics as revealed by IR deconvolution method and XRD analysis.     

Ionic conductivity and interfacial resistance of electrospun poly(acrylonitrile)/poly(methyl methacrylate) fibrous membrane-based polymer electrolytes for lithium ion batteries

Electrospun poly(acrylonitrile) fibrous membrane (PAN-EFM) is prepared and enhanced by adding poly(methyl methacrylate)(PMMA) and subsequently minimizing the average diameter of the PAN/PMMA blend fibers. Electrospinning of the 50/50 wt% PAN/PMMA solution is carried out with the aim of the simultaneous presence of both polymers on the fiber surface. Their presence in exterior surface is confirmed using the Fourier transform infrared spectroscopy-attenuated total reflectance (FTIR-ATR) technique next to the leaching of PMMA with acetone. The process parameters are optimized in four stable modes with the average diameter decreasing from 445 to 150 nm. Mechanical strength of the membrane is measured and reported. Comparing the sample electrochemical properties of the EFMs reveals that the addition of PMMA increases ionic conductivity from 1.02 to 3.31 mS cm^?1 and reduces interfacial resistance from ~1000 to ~400?Ω. It is also demonstrated that the ~300-nm reduction in average diameter of the blend fibers increases ionic conductivity from 3.31 to 5.81 mS cm^?1 and reduces interfacial resistance from ~400 to ~200?Ω.     

Supercapacitor performances of rich nitrogen-doped mesoporous graphene fabricated by a facile template-free copyrolysis process

Rich nitrogen-doped mesoporous graphene (NDMG) with a large specific surface area of 496.8 m² g^?1 and high electrical conductivity of 327.2 S cm^?1, and suitable pore size was synthesized by a facile co-thermal annealing of pre-prepared phenolic polymer and dicyandiamide. The NDMG has a high nitrogen content (7.9 wt%) and can act as promising electroactive materials for two-electrode symmetric supercapacitors. The NDMG cells displayed a high specific capacitance of ca. 316 F g^?1 at 0.5 A g^?1, which is much higher than that of the pristine graphene devices (ca. 123 F g^?1). Moreover, compared with the capacitance drop rate of pristine graphene devices (8.9 %), the specific capacitance of NDMG cells was decreased by only 3.2 % after 2000 cycles, exhibiting a good cycling performance and reversibility. In addition, the specific capacitance of the NDMG cells can reach 251 F g^?1 at 5.0 A g^?1, revealing an excellent rate capability and implying the ability to deliver a high energy density at a high power density. The good electrochemical performances of NDMG can be attributed to its high surface area, suitable mesopore size, and high electrical conductivity.     

Construction of 3D polypyrrole/CoS/graphene composite electrode with enhanced pseudocapacitive performance

Herein, 3D graphene/nickel foam (GE/NF) composite matrix was successfully fabricated by using NF as template through a self-catalytic thermal chemical vapor deposition process. By using the prepared GE/NF as substrate, CoS nanosheets were deposited via a facial one-step electrochemical deposition method. Owing to the advantage of GE in boosting the electrical contact between the electroactive host material and current collector, the as-prepared 3D CoS/GE/NF electrode demonstrated a superior capacitance value of 2308 F g^?1 at 1 A g^?1 and a high rate capability of 70.49% at 20 A g^?1. After depositing the polypyrrole (PPY) film on 3D CoS/GE/NF electrode, the electrochemical performance of CoS was further greatly improved and delivered an extremely high capacitance value of 3450 F g^?1 at 1 A g^?1, with good rate capability (62.61% at 20 A g^?1) and improved cycling stability. The enhanced electrochemical performance of PPY/CoS/GE/NF electrode is closely related to the advantage of PPY film in increasing the electrical conductivity and reinforcing the integrity of electrode.     

Characterization of SiON/InP MOS structure with sulfidation, fluorination, and hydrogenation

Liquid phase deposited SiON film on InP with (NH₄)₂S treatment shows superior electrical characteristics due to the reduction of native oxides and sulfur passivation. Simultaneously, HF in SiON liquid phase deposition solution can effectively reduce residual native oxides on InP and provide fluorine passivation in SiON/InP film and interface. With post-metallization annealing (PMA), hydrogen ions can further passivate defects in SiON/InP film and interface. With these treatments, the PMA-LPD-SiON/(NH₄)₂S-treated InP MOS structure shows excellent electrical characteristics. With the physical thickness of 5.4 nm, the leakage current densities can be as low as 1.25×10^?7 and 6.24×10^?7 A/cm² at ±2 V, and the interface state density is 3.25×10¹¹ cm^?2?eV^?1.     

Chitosan-ZnO/polyaniline ternary nanocomposite for high-performance supercapacitor

We report on the synthesis of chitosan-zinc oxide (ZnO)/polyaniline (CS-ZnO/PANI) ternary nanocomposites via in situ polymerization of aniline in the presence of CS-ZnO nanocomposite prepared by simple precipitation method. The structure, morphology, and physicochemical properties of prepared ternary composites are characterized by Fourier transform infrared, UV–visible, X-ray diffraction, SEM, EDXS, TEM, thermogravimetric/differential thermal analysis, and N₂ adsorption/desorption measurements. Their electrochemical properties are also investigated using cyclic voltammetry, galvanostatic charge–discharge tests, and electrochemical impedance spectroscopy. Electrochemical measurements show that the mesoporous CS_0.12-ZnO_2.5/PANI electrode yields larger specific capacitance (587.15 F g^?1) than the corresponding PANI-ZnO electrode without added chitosan and the capacitance retention is 80 % after 1,000 charge/discharge cycles at 175 mA cm^?2 current density in the voltage range of 0 to 0.8 V vs. SCE, due to the synergistic effect among three components which result in enhanced specific capacitance and cycling stability. The resulting composites are promising electrode materials for high-performance, environmentally friendly, and low-cost electrical energy storage devices.     

Stability of Al<Subscript>2</Subscript>O<Subscript>3</Subscript>/Al in ionic liquid BMI.BF<Subscript>4</Subscript>/γ-butyrolactone electrolytes for use in electrolytic capacitors

The stability of aluminium oxide has been investigated in mixtures of ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate (BMI.BF₄) and γ-butyrolactone (GBL) for application as the impregnation electrolyte of aluminium electrolytic capacitors. Ionic conductivity measurements of BMI.BF₄/GBL electrolytes at different temperatures were performed, as well as electrochemical impedance spectroscopy and cyclic voltammetry experiments. The results show that the highest ionic conductivity value of 40 mS cm^?1 (70 °C) is achieved in electrolyte x _BMI.BF4 = 0.2. The total capacitance values, associated with the dielectric oxides, vary between 1 and 8 μF cm^?2 for all studied electrolytes after 30 days of immersion. The polarization resistance and total capacitance of the electrolyte/Al₂O₃/Al system decrease slightly with immersion time, showing the stability of Al₂O₃/Al in ionic liquid BMI.BF₄/GBL electrolytes.     

The Translation Mechanism of Smectite to Illite: An Infrared Spectroscopic Study of Ordered Mixed-Layer Illite/Smecite

The infrared spectral characteristics of ordered mixed-layer illite/smectite interstratified clay mineral with different mixed-layer ratios (S% = 5%, 10%, 15%, 20%, 25%, and 30%, where S% is mixed-layer ratio) from the Shihezi Formation of Late Permian in the Hanxing mining area, Hebei province of China, were studied by infrared spectroscopy. The results show that three infrared regions (3625 cm^?1±, 1200–1000 cm^?1, 850–700 cm^?1) changed with S%'s variation. The characteristic absorption bands of smectite at 3640 cm^?1, 1030 cm^?1, and 825 cm^?1 disappeared gradually with the decrease of S%, and the intensity of characteristic absorption bands of illite at 3625 cm^?1, 1100 cm^?1, 1024 cm^?1, 796 cm^?1, and 777 cm^?1 increased. These changes indicated that the illitization of smectite was realized by partial substitution of aluminum iron (Al³⁺) for silicon iron (Si⁴⁺) in silico-oxygen (Si–O) tetrahedron.     

Preparation and characterization of biodegradable poly(ε-caprolactone)-based gel polymer electrolyte films

Biodegradable polymer electrolyte films based on poly(ε-caprolactone) (PCL) in conjunction with lithium tetrafluoroborate (LiBF₄) salt and 1-ethyl-3-methylimidazolium tetrafluoroborate (EMIMBF₄) ionic liquid were prepared by solution cast technique. The structural, morphological, thermal, and electrical properties of these films were examined using X-ray diffraction (XRD), optical microscopy (OM), differential scanning calorimetry (DSC), and impedance spectroscopy. The XRD and OM results reveal that the pure PCL possesses a semi-crystalline nature and its degree of crystallinity decreases with the addition of LiBF₄ salt and EMIMBF₄ ionic liquid. DSC analysis indicates that the melting temperature and enthalpy are apparently lower for the 40 wt% EMIMBF₄ gel polymer electrolyte as compared with the others. The ambient temperature electrical conductivity increases with increasing EMIMBF₄ concentration and reaches a high value of ～2.83?×?10^?4 S cm^?1 for the 85 PCL:15 LiBF₄ + 40 wt% EMIMBF₄ gel polymer electrolyte. The dielectric constant and ionic conductivity follow the same trend with increasing EMIMBF₄ concentration. The dominant conducting species in the 40 wt% EMIMBF₄ gel polymer electrolyte determined by Wagner’s polarization technique are ions. The ionic conductivity of this polymer electrolyte (～2.83?×?10^?4 S cm^?1) should be high enough for practical applications.     

An Infrared Method,with Reduced Solvent Consumption,for the Determination of Chlorsulfuron in Pesticide Formulations

A simple method has been developed for the determination of Chlorsulfuron in pesticide formulations by Fourier Transform Infrared (FTIR). Samples were diluted with CHCl_3^? , and the FTIR spectra of the samples and standards were obtained at a nominal resolution of 4 cm^? 1 from 4000 to 900 cm^? 1 with the accumulation of 25 scans. Chlorsulfuron determination was based on the measurement of peak area values from 1373 to 1363 cm^? 1 which were corrected by use of a two points baseline defined from 1401 to 1302 cm^? 1. The limit of detection achieved, which was of the order of 6 µg g^? 1, was appropriate for the determination of Chlorsulfuron in commercially available formulations. FTIR results were statistically comparable with those found by High Performance Liquid Chromatography (HPLC). The procedure reduces organic solvent consumption per sample to less than 3 ml CHCl₃, reduces waste generation and increases the sample measurement frequency up to 60 h^? 1.     

Conduction mechanism of lithium bis(oxalato)borate–cellulose acetate polymer gel electrolytes

Polymer gel electrolytes (PGE) belonging to salt–solvent–polymer hybrid systems are prepared using a mixture of lithium bis(oxalato)borate (LiBOB), γ-butyrolactone (γ-BL), and cellulose acetate (CA). The increase in ionic conductivity of PGE is due to the dissociation of ion aggregates, as confirmed by Fourier transform infrared analysis. The highest conductivity attained by the PGE is 7.05 mS cm^?1 at 2.4 wt.% CA. The plots of conductivity–temperature show a classical Arrhenius relationship. The electrical properties of the sample with the highest conductivity are analyzed using electrical permittivity and electric modulus formalism studies. Meanwhile, the frequency-dependent conductivity of the polymer gel electrolyte adheres to Jonscher’s power law. Conduction mechanism study also shows that the 2.4 wt.% CA PGE is in agreement with the small polaron hopping model.     

Poly (ethylene oxide) (PEO)-based,sodium ion-conducting‚ solid polymer electrolyte films,dispersed with Al<Subscript>2</Subscript>O<Subscript>3</Subscript> filler,for applications in sodium ion cells

The studies on solid polymer electrolyte (SPE) films with high ionic conductivity suitable for the realization of all solid-state Na-ion cells? form the focal theme of the work presented in this paper. The SPE films are obtained by the solution casting technique using the blend solution of poly (ethylene oxide) (PEO) with ethylene carbonate (EC) and propylene carbonate (PC) and complexed with sodium nitrate. Structural and thermal studies of SPE films are done by XRD, FTIR spectroscopy, and TGA techniques. Surface morphology of the films is studied using the FESEM. The ionic conductivity of SPE films is determined from the electrochemical impedance spectroscopy studies. For the SPE film with 16 wt% of NaNO₃ used for reacting with the polymer blend of PEO with EC and PC, the ionic conductivity obtained is around 1.08 × 10^?5 S cm^?1. Addition of the Al₂O₃ as the filler material is found to enhance the ionic conductivity of the SPE films. The studies on the Al₂O₃ modified SPE film show an ionic conductivity of 1.86 × 10^–4 S cm^?1, which is one order higher than that of the SPE films without the filler content. For the SPE film dispersed with 8 wt% of Al₂O₃, the total ion transport number observed is around 0.9895, which is quite impressive from the perspective of the applications in electrochemical energy storage devices. From the cyclic voltammetry studies, a wide electrochemical stability window up to 4 V is observed, which further emphasizes the commendable electrochemical behavior of these SPE films.     

Investigation of L(+)-Ascorbic acid with Raman spectroscopy in visible and UV light

Abstract: Raman spectroscopy investigations of l(+)-ascorbic acid and its mono- and di-deprotonated anions (AH^? and A^2?) are reviewed and new measurements reported with several wavelengths, 229, 244, 266, 488, and 532 nm. Results are interpreted, assisted by new DFT/B3LYP quantum chemical calculations with 6-311++G(d,p) basis sets for several conformations of ascorbic acid and the anions. Raman spectra were measured during titration with NaOH base in an oxygen-poor environment to avoid fluorescence when solutions were alkaline. The ultraviolet (UV) absorption band for ascorbic acid in aqueous solution at ～247 nm was found to cause strong resonance enhancement for the ring C?C stretching mode (called B) at ～1692 cm^?1. The ascorbate mono-anion absorbs at ～264.8 nm giving Raman resonance enhancement for the same ring C–C bond stretching, downshifted to ～1591 cm^?1. Finally, for the ascorbate di-anion, absorption was found at ～298.4 nm with molar absorptivity of ～7,000 L mol^?1 cm^?1 and below ～220 nm. With UV light (244 and 266 nm), strongly basic solutions gave pronounced Raman resonance enhancement at ～1556 cm^?1. Relatively weak preresonance enhancement was seen for A^2? when excitation was done with 229 nm UV light, allowing water bands to become observable as for normal visible light Raman spectra.     

Utilization of saffron (<Emphasis Type="Italic">Crocus sativus L.</Emphasis>) as sensitizer in dye-sensitized solar cells (DSSCs)

Photoelectrodes of dye-sensitized solar cells (DSSCs) have been prepared using nanosized titanium dioxide that have soaked in a solution of different saffron (Crocus sativus L.) spice content in ethanol. The optimized polyacrylonitrile (PAN)-based gel polymer electrolyte with 40.93 wt.% ethylene carbonate, 37.97 wt.% propylene carbonate, 4.37 wt.% tetrapropylammonium iodide, 9.86 wt.% PAN, 1.24 wt.% 1-butyl-3-methylimidazolium iodide, 4.35 wt.% lithium iodide and 1.28 wt.% iodine has been used as the electrolyte for DSSC. The electrolyte has conductivity of 2.91 mS cm^?1 at room temperature (298 K). DSSCs were also sensitized with saffron solution that has been added with 30 wt.% chenodeoxycholic acid (CDCA) co-adsorbent and designated as DSSC P4. The solar cell converts light-to-electricity at an efficiency of 0.31%. This is 29% enhancement in efficiency for the DSSC without addition of CDCA in the saffron-ethanol solution. The DSSC exhibits current density at short-circuit (J _sc ) of 1.26 mA cm^?2, voltage at open circuit (V _oc ) of 0.48 V and 51% fill factor. DSSC P4 also exhibits the highest incident photon-to-current density of more than 40% at 340 nm wavelength.     

Urea-assisted solvothermal synthesis of monodisperse multiporous hierarchical micro/nanostructured ZnCo<Subscript>2</Subscript>O<Subscript>4</Subscript> microspheres and their lithium storage properties

High-quality monodisperse multiporous hierarchical micro/nanostructured ZnCo₂O₄ microspheres have been fabricated by calcinating the Zn_1/3Co_2/3CO₃ precursor prepared by urea-assisted solvothermal method. The as-prepared products are characterized by X-ray diffraction (XRD), field-emission scanning electron microscopy (FESEM), high-resolution transmission electron microscopy (HRTEM), and Brunauer-Emmett-Teller (BET) measurement to study the crystal phase and morphology. When tested as anode material for lithium ion batteries, the multiporous ZnCo₂O₄ microspheres exhibit an initial discharge capacity of 1,369 mAh g^?1 (3,244.5 F cm^?3) and retain stable capacity of 800 mAh g^?1 (1,896 F cm^?3) after 30 cycles. It should be noted that the good electrochemical performances can be attributed to the porous structure composed of interconnected nanoscale particles, which can promote electrolyte diffusion and reduce volume change during discharge/charge processes. More importantly, this ZnCo₂O₄ 3D hierarchical structures provide a large number of active surface position for Li⁺ diffusion, which may contribute to the improved electrochemical performance towards lithium storage.     

Structural Characterization of Aniline-Bentonite Composite by FTIR,DTA/TG,and PXRD Analyses and BET Measurement

ABSTRACT

The aniline species incorporated into the acid-activated bentonite matrices leads to the decay of the skeletal stretches centered at 1041 cm^?1 and the rise of new features in the phenyl ring frequency region, 1700–1400 cm^?1, demonstrates clearly the influence of the acid activation on the Lewis sites necessary for coordination of aniline to bentonite. The exothermic DTA features at 507, 684, and 725°C indicate the release of both the clusters and the decomposed fragments of the aniline-clay composite, and the highly stable carbonaceous residue, respectively. The basal difference by ～1.0 nm and the much smaller surface area (33.8 m²/g) than that of the nonintercalated bentonite (129.2 m²/g) prove the presence of the tilted aniline species between the interlamellar grooves of the bentonite framework.     

Nanocrystalline Li<Subscript>2</Subscript>TiO<Subscript>3</Subscript> electrodes for supercapattery application

Nanocrystalline Li₂TiO₃ was successfully synthesized using solid-state reaction method. The microstructural and electrochemical properties of the prepared material are systematically characterized. The X-ray diffraction pattern of the prepared material exhibits predominant (002) orientation related to the monoclinic structure with C2/c space group. HRTEM images and SAED analysis reveal the well-developed nanostructured particles with average size of ～40 nm. The electrochemical properties of the prepared sample are carried out using cyclic voltammetry (CV) and chronopotentiometry (CP) using Pt//Li₂TiO₃ cell in 1 mol L^?1 Li₂SO₄ aqueous electrolyte. The Li₂TiO₃ electrode exhibits a specific discharge capacity of 122 mAh g^?1; it can be used as anode in Li battery within the potential window 0.0–1.0 V, while investigated as a supercapacitor electrode, it delivers a specific capacitance of 317 F g^?1 at a current density of 1 mA g^?1 within the potential range ?0.4 to +0.4 V. The demonstration of both anodic and supercapacitor behavior concludes that the nanocrystalline Li₂TiO₃ is a suitable electrode material for supercapattery application.     

Ionic conductivity and dielectric properties of potato starch-magnesium acetate biopolymer electrolytes: the effect of glycerol and 1-butyl-3-methylimidazolium chloride

In the present work, the effect of glycerol and 1-butyl-3-methylimidazolium chloride (BmImCl) on the conductivity and dielectric properties of potato starch doped with magnesium acetate, Mg(C₂H₃O₂)₂-based electrolytes is studied. The electrolytes are prepared via solution cast technique. The interaction between the materials is proven by Fourier transform infrared (FTIR) analysis. Electrolyte with 20 wt.% Mg(C₂H₃O₂)₂ exhibits a room temperature conductivity of (2.44 ± 0.37) × 10^?8 S cm^?1. The addition of 30 wt.% glycerol to the best polymer-salt composition has further enhanced the conductivity to (2.60 ± 0.42) × 10^?6 S cm^?1. A conductivity of (1.12 ± 0.08) × 10^?5 S cm^?1 has been achieved when 18 wt.% BmImCl is added to the best polymer-salt-plasticizer composition. From the loss tangent (tan δ) plot, the relaxation time (t _r) for selected electrolytes is determined. From transference number measurements, ions are found to be the dominant charge carriers.     

Conductivity or rheology? Tradeoff for competing properties in the fabrication of a gel polymer electrolyte based on chitosan-barbiturate derivative

Chitosan-barbiturate (Ch-Ba) derivative was synthesized to afford organosolubility. Attachment of Ba onto the Ch backbone was confirmed by ¹H NMR with peaks at 8.2 and 11.1 ppm, and FTIR with bands at 1679 and 1739 cm^?1 belonging to the Ba ring. This derivative was used as a host polymer in the preparation of gel polymer electrolytes. The components of the gel consist of tetrapropylammonium iodide (TPAI) as the salt, SiO₂ nanofiller (NF) as the mechanical stabilizer, and dimethyl sulfoxide (DMSO) as the solvent. The necessary formulation required to produce the gel was studied using response surface models by means of artificial neural networks. Electrochemical and rheological behaviors were studied and the simulated model predicted conductivities were as high as 8.51 mS cm^?1 while still maintaining a solid-like gel structure in the region where storage modulus dominated loss modulus, G″/G′?<?1.