Effect of Fe on Martensitic Transformation of NbRu High-Temperature Shape Memory Alloys: Experimental and Theoretical Study

Effect of Fe on the martensitic transformation of NbRu high-temperature shape memory alloys is investigated by the experiments and first-principles calculations. The results show that Fe is predicted to occupy Ru sites. The addition of Fe increases the stability of Nb₅₀Ru_50-xFe_x β phase, leading to the significant decrease of the β to β martensitic transformation temperature. In addition, the mechanism of the Fe alloying effect is explained on the basis of the electronic structure.     

Ab-initio investigation of electronic properties and magnetism of half-Heusler alloys XCrAl (X=Fe, Co, Ni) and NiCrZ (Z=Al, Ga, In)

The electronic structures and magnetism of the half-Heusler alloys XCrAl (X=Fe, Co, Ni) and NiCrZ (Z=Al, Ga, In) have been investigated to search for new candidate half-metallic materials. Here, we predict that NiCrAl, and NiCrGa and NiCrIn are possible half-metals with an energy gap in the minority spin and a completely spin polarization at the Fermi level. The energy gap can be attributed to the covalent hybridization between the d states of the Ni and Cr atoms, which leads to the formation of bonding and antibonding peaks with a gap in between them. Their total magnetic moments are 1μ_B per unit cell; agree with the Slater-Pauling rule. The partial moment of Cr is largest in NiCrZ alloys and moments of Ni and Al are in antiferromagnetic alignment with Cr. Meanwhile, it is also found that FeCrAl is a normal ferromagnetic metal with a magnetic moment of 0.25μ_B per unit cell and CoCrAl is a semi-metal and non-magnetic.     

Band structure calculations for Heusler phase Co2YBi and half-Heusler phase CoYBi (Y=Mn, Cr)

We have studied the electron structure and magnetic properties of Heusler phase Co₂YBi and half-Heusler phase CoYBi (Y=Mn, Cr) by using the full-potential linearized-augmented plane-wave (FLAPW) method. Co₂MnBi and Co₂CrBi are predicted to be half-metallic magnetism with a total magnetic moment of 6 and 5 μ_B, respectively, well consistent with the Slater-Pauling rule. We also predict CoMnBi to be half-metallic magnetism with a slight compression. The gap origin for Co₂MnBi and Co₂CrBi is due to the 3d electron splitting of Mn (Cr) and Co atoms, and the gap width depends on Co electron splitting. The atom coordination surroundings have a great influence on the electron structure, and consequently the Y site in the X₂YZ structure has a more remarkable electron splitting than the X site due to the more symmetric surroundings. The investigation regarding the lattice constant dependence of magnetic moment shows that the Co magnetic moment exhibits an opposite behavior with the change of the lattice constant for Heusler and half-Heusler alloys, consequently leading to the different variation trends for total magnetic moment. The variation of total and atom magnetic moment versus lattice constant can be explained by the extent of 3d electron splitting and localization of Mn (Cr) and Co atoms for both the series of alloys.     

Effect of Fe substitution on the magnetic properties of half-Heusler alloy CoCrAl

The effect of Fe substitution for the vacant site in half-Heusler alloy CoCrAl is studied. A series of single phase CoFe_xCrAl (x=0.0, 0.25, 0.5, 0.75 and 1.0) alloys has been successfully synthesized. The lattice constant is found to increase almost linearly with increasing Fe content, indicating Fe atoms enter the lattice of CoCrAl instead of existing as a secondary phase. When Fe entering the vacant site, spin polarization occurs and the alloy turns from a semimetal in CoCrAl to a half-metallic ferromagnet (HMF) in CoFeCrAl. This is due to the reconstruction of the energy band with Fe substitution. The Curie temperature and saturation magnetic moments are enhanced and increase monotonically with increasing Fe content. The variation of the spin moment follows the Slater-Pauling curve and agrees with the theoretical calculation as well.     

Effect of Cr on the electronic structure of Co3Al intermetallic compound: A first-principles study

The effect of doping with Cr on the electronic structure and magnetism of Co₃Al has been studied by density functional calculations. It has been found that the Cr atom has a strong site preference for the B-site in Co₃Al. With the substitution of Cr for Co, the total densities of states (DOS) change obviously: A DOS peak appears at E_F in the majority spin states and an energy gap is opened in the minority spin states. The effect of Cr in Co₃Al is mainly to push the antibonding peak of the Co (A,C) atoms high on the energy scale and to form the energy gap around E_F, and also to contribute to the large DOS peak at E_F in the majority spin direction. The calculations indicate a ferromagnetic alignment between the Co and Cr spin moments. The calculated total magnetic moment decreases and becomes closer to the Slater–Pauling curve with increasing Cr content. This is mainly due to the decrease of the Co (A,C) spin moments. At the same time, the moments of Co (B) and Cr (B) only change slightly.     

Effect of the main-group elements on the electronic structures and magnetic properties of Heusler alloys Mn2NiZ (Z=In, Sn, Sb)

The magnetic properties and electronic structure of Mn₂NiZ (Z=In, Sn, Sb) have been studied. The magnetic structure of these alloys is mainly determined by the main-group element Z instead of the distance between the Mn atoms. Electronic structure calculations suggest that Mn₂NiIn and Mn₂NiSn are both ferrimagnets with antiparallel alignment between the Mn moments. But this antiferromagnetic coupling is weakened by the increasing number of valence electrons of the Z atoms. When it comes to Mn₂NiSb, a ferromagnetic coupling between the Mn atoms is observed. Mn₂NiSn and Mn₂NiSb have been synthesized successfully. Their M_s at 5 K agree well with the theoretical value.     

High spin polarization in ordered Cr3Co with the DO3 structure: A first-principles study

The electronic structure of the highly ordered alloy Cr₃Co with the DO₃ structure has been studied by FLAPW calculations. It is found that the ferrimagnetic state is stable and that the equilibrium lattice constant of Cr₃Co equals 5.77 Å. A large peak in majority spin density of states (DOS) and an energy gap in minority spin DOS are observed at the Fermi level, which results in a high spin polarization of 90% in the ordered alloy Cr₃Co. The total magnetic moment of Cr₃Co is 3.12μ_B, which is close to the ideal value of 3μ_B derived from the Slater-Pauling curve. An antiparallel alignment between the moments on the Cr (A, C) sites and the Cr (B) sites is observed. Finally, the effect of lattice distortion on the electronic structure and on magnetic properties of Cr₃Co compound is studied. A spin polarization higher than 80% can be obtained between 5.55 and 5.90 Å. With increasing lattice constant, the magnetic moments on the (A, C) sites increase and the moments on the (B, D) sites decrease. They compensate each other and make the total magnetic moment change only slightly.     

Electronic structure and magnetism of NpTAl (T=Co, Ni, Rh, Ir and Pt) and NpNiGa from first-principles calculations

First-principles calculations based on density-functional theory were performed for the first time on NpTAl (T=Co, Ni, Rh, Ir and Pt) and NpNiGa. The electronic density of states and equilibrium volume were studied using relativistic full-potential APW plus local-orbitals calculations. The magnetocrystalline anisotropy energy was estimated from total-energy calculations and the a-axis was predicted to be the easy axis of magnetization with the exception of T=Rh. Finally, we employed the LSDA+U method to mimic the orbital polarization and to obtain the correct total magnetic moments in experimental equilibrium.     

The stability of FCC crystal Ni under uniaxial loading

Taking Ni as an example, the structural stability and theoretical strength of FCC crystals under uniaxial loading were investigated by combining the modified analytical embedded atom method (MAEAM) with modified Born stability criteria. The results revealed that, under sufficient compression, there existed a stress-free instable BCC phase and then a stress-free metastable BCT phase corresponding to local maximum and minimum internal energy, respectively. The stable region ranged for the theoretical strength from −5.143 eV/nm³ with a corresponding strain of −9.94% under compression to 10.396 eV/nm³ with a corresponding strain of 9.66% under tension.     

Quantitative Model of Large Magnetostrain Effect in Ferromagnetic Shape Memory Alloys

A quantitative model describing large magnetostrain effect observed in several ferromagnetic shape memory alloys such as Ni₂MnGa is briefly reported. The paper contains an exact thermodynamic consideration of the mechanical and magnetic properties of similar type materials. As a result, the basic mechanical state equation including magnetic field effect is directly derived from a general Maxwell relation. It is shown that the magnetic field induced deformation effect is directly connected with the strain dependence of magnetisation. A simple model of magnetisation and its dependence on the strain is considered and applied to explain the results of experimental study of large magnetostrain effects in Ni₂MnGa.     

Control of the boiling crisis: analysis of a model system

Ab initio calculations of the magnetic properties and site preference of Mn in Fe_3-xMn_xSi were carried out using density functional theory and employing the TB-LMTO-ASA method. Qualitative agreement with the experimental results is obtained for site preference as well as for total and local magnetic moments. It is postulated that short-range order would explain observed discrepancies between theoretical and experimental results.     

Temperature dependences of the electron-phonon coupling, electron heat capacity and thermal conductivity in Ni under femtosecond laser irradiation

The electron temperature dependences of the electron-phonon coupling factor, electron heat capacity and thermal conductivity are investigated for Ni in a range of temperatures typically realized in femtosecond laser material processing applications, from room temperature up to temperatures of the order of 10⁴ K. The analysis is based on the electronic density of states obtained through the electronic structure calculations. Thermal excitation of d band electrons is found to result in a significant decrease in the strength of the electron-phonon coupling, as well as large deviations of the electron heat capacity and the electron thermal conductivity from the commonly used linear temperature dependences on the electron temperature. Results of the simulations performed with the two-temperature model demonstrate that the temperature dependence of the thermophysical parameters accounting for the thermal excitation of d band electrons leads to higher maximum lattice and electron temperatures achieved at the surface of an irradiated Ni target and brings the threshold fluences for surface melting closer to the experimentally measured values as compared to the predictions obtained with commonly used approximations of the thermophysical parameters.     

First principle study on phase stability and electronic structure of YCu

The phase stability and electronic structure of YCu were studied by self-consistent full-potential linearized augmented plane wave method (FP_LAPW) on the basis of the density functional theory (DFT). The calculated equilibrium volumes are 41.963 and 173.21 Å³$173.21{\text{Å}}^3$ for B2 and B27 structures respectively, which are in good agreement with the experimental values. The total energy of the B27 phase is about 0.03 eV lower than that of the B2 phase. The formation energies are −1.173 and −1.204 eV$-1.204\text{eV}$ for B2 and B27 structures respectively. The density of state at the Fermi energy, N(EF)$N(E_F)$, is 1.08 states/eV$1.08\text{states}/\text{eV}$ for B2 phase and 0.92 states/eV$0.92\text{states}/\text{eV}$ for B27 phase, respectively. These results indicate that the B27 phase is the thermodynamic ground state equilibrium phase of YCu at low temperatures, as observed experimentally. However, our calculations also predict that a pressure-induced B27 to B2 phase transition exists in YCu.     

Stable atomic structure and magnetism of Pt–Cr binary surface alloys on Pt(0 0 1): First-principle calculations

The possibility of Pt–Cr surface alloys formation on Pt(0 0 1) was investigated and their magnetism was calculated by the full-potential linearized augmented plane wave (FLAPW) method with eight different atomic configurations. The most stable structure was calculated to be the Pt-segregated L1₂ ferromagnetic surface alloy. A₃B types (L1₂ or D0₂₂) were more stable compared to AB types (L1₀). It implies that the A₃B type surface alloys may be formed when depositing a monolayer of Cr on Pt(0 0 1). It was found from the total energy calculations that there exists a strong tendency of the Pt segregation. The segregation further stabilizes the surface alloy significantly. The work function of the most stable surface alloy was calculated to be 6.02 eV and the magnetic moment of the surface Cr was much enhanced to 3.3 μ_B. It is a quite interesting finding that the coupling between Cr and Pt atoms on the surface plane is ferromagnetic in the Pt-segregated L1₂ ferromagnetic surface alloy, while the coupling is antiferromagnetic in the bulk.     

Electronic structure and magnetism of MnFeP1−xSix alloys from first-principles calculations

First-principles calculations of electronic structure and magnetic properties based on density-functional theory were performed for MnFeP_1−xSi_x (0.44?x?0.60) alloys which are considered as promising magnetocaloric refrigerants. We used the full-potential APW+lo method and treated the random order of P(Si) atoms in the ZrNiAl-type structure in a virtual-crystal approximation. A non-monotonic behavior of the alloy magnetization as a function of x was obtained, in qualitative agreement with experiment, and explained in terms of the spin-polarized densities of states.     

Magnetic properties of R2Fe17−xGax (R=Y and Gd) compounds

The magnetic properties of Y₂Fe_17−xGa_x for 3≤x≤7 and Gd₂Fe_17−xGa_x for 5≤x≤7 have been investigated using ⁵⁷Fe Mössbauer spectroscopy. These compounds have the rhombohedral Th₂Zn₁₇ structure. X-ray diffraction analysis of aligned powders shows that the easy direction of magnetization is parallel to the c-axis in Y₂Fe₁₀Ga₇ and Gd₂Fe₁₀Ga₇ and is perpendicular to the c-axis in Y₂Fe₁₄Ga₃, Y₂Fe₁₂Ga₅, Gd₂Fe₁₂Ga₅ and Gd₂Fe₁₁Ga₆. Mössbauer studies indicate that those samples are ordered ferromagnetically. The ⁵⁷Fe hyperfine field decreases with increasing Ga content. This decrease results from the decreased magnetic exchange interactions resulting from Ga substitution. The average isomer shift, δ, for R₂Fe_17−xGa_x (R=Y and Gd) at room temperature is positive and the magnitude of δ increases with increasing Ga content.     

Structure and magnetic properties of FexPd1−x thin films

Fe_xPd_1−x films were epitaxially grown on Au(001). The structure changes from face-centered-cubic (fcc) to face-centered-tetragonal (fct) at x∼0.6, then to body-centered-cubic (bcc) at x∼0.85. Ferromagnetism shows up at 300 K when x is 0.06. The cubic magnetocrystalline anisotropy constant K₁ switches from negative to positive as x increases to 0.34.     

Magnetic properties, Mössbauer effect and first principle calculations study of laves phase HfFe2

The magnetic properties and hyperfine interaction parameters for Laves phase HfFe₂ with C14 type structure are studied using SQUID magnetometer and M?ssbauer measurement. The saturation magnetization, remanent magnetization, coercive field, magnetic moment per unit formula and the hyperfine magnetic field at Fe site are reported. In addition, a detailed theoretical study of the electronic structure and hyperfine magnetic fields of the two possible HfFe₂ structures, C15 and C14, is presented. Using the full-potential linearized augmented plane wave (FP-LAPW) method as implemented in the WIEN 97 package, the equilibrium volume, bulk moduli, magnetic moments and hyperfine magnetic fields for the two structures are calculated. The obtained results are compared with the measured data.     

Structure of intermetallic phases in Al-free galvannealed zinc coatings

Galvannealed coatings of thickness of (20–40) μm were prepared on the ultra low carbon (ULC) steel substrate. Metalography analysis was carried out to obtain the phase composition of coatings. Coatings were then transfered onto a polyacrylate foil. Transmission spectra yielding all the positions of iron within the coating thickness were measured. The doublet of zeta phase occured only after short annealing times, lower annealing temperatures and longer dipping times. Parameters of three sites of delta phase were observed to approach equilibrium values at higher annealing temperatures and longer annealing times. These changes are ascribed to diffusion transformations in the coatings during annelaing. Presented at International Colloquium “M?ssbauer Spectroscopy in Materials Science”, Všemina, Czech Republic, June 1–4, 2004.     

Mn and Fe impurities in MgB2

Based on first principles calculations, we show that Mn impurities are magnetic in MgB₂ due to exchange-splitting of band. Thus, Mn impurities could act as strong magnetic scattering centres leading to pair-breaking effects in MgB₂. In contrast, we find Fe impurities in MgB₂ to be nearly non-magnetic.