Thermal decomposition mechanisms of MgCl2·6H2O and MgCl2·H2O

The thermal decomposition mechanisms and the intermediate morphology of MgCl₂·6H₂O and MgCl₂·H₂O were studied using integrated thermal analysis, X-ray diffraction, scanning electron microscope and chemical analysis. The results showed that there were six steps in the thermal decomposition of MgCl₂·6H₂O: producing MgCl₂·4H₂O at 69 °C, MgCl₂·2H₂O at 129 °C, MgCl₂·nH₂O (1 ≤ n ≤ 2) and MgOHCl at 167 °C, the conversion of MgCl₂·nH₂O (1 ≤ n ≤ 2) to Mg(OH)Cl·0.3H₂O by simultaneous dehydration and hydrolysis at 203 °C, the dehydration of Mg(OH)Cl·0.3H₂O to MgOHCl at 235 °C, and finally the direct conversion of MgOHCl to the cylindrical particles of MgO at 415 °C. To restrain the sample hydrolysis and to obtain MgCl₂·H₂O, MgCl₂·6H₂O was first calcined in HCl atmosphere until 203 °C when MgCl₂·H₂O was obtained; HCl gas was then turned off and the calcination process continued, producing Mg₃Cl₂(OH)₄·2H₂O calcined at 203 °C, Mg₃(OH)₄Cl₂ at 220 °C and MgO at 360 °C. The temperature of producing MgO from calcination of MgCl₂·H₂O was lower (360 °C) than that from MgCl₂·6H₂O (415 °C) because of its more reactive intermediate products: the irregular shape and tiny needle-like Mg₃Cl₂(OH)₄·2H₂O particles and the uneven surface porous Mg₃(OH)₄Cl₂ particles. The MgO particles obtained at 360 °C had a flake structure.     

Calorimetric study and thermal analysis of [Gd4/3Y2/3(Gly)6(H2O)4](ClO4)6·5H2O and [ErY(Gly)6(H2O)4](ClO4)6·5H2O (Gly: glycin)

Two solid-state coordination compounds of rare earth metals with glycin, [Gd_4/3Y_2/3(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O and [ErY(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O were synthesized. The low-temperature heat capacities of the two coordination compounds were measured with an adiabatic calorimeter over the temperature range from 78 to 376 K. [Gd_4/3Y_2/3(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O melted at 342.90 K, while [ErY(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O melted at 328.79 K. The molar enthalpy and entropy of fusion for the two coordination compounds were determined to be 18.48 kJ mol⁻¹ and 53.9 J K⁻¹ mol⁻¹ for [Gd_4/3Y_2/3(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O, 1.82 kJ mol⁻¹ and 5.5 J K⁻¹ mol⁻¹ for [ErY(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O, respectively. Thermal decompositions of the two coordination compounds were studied through the thermogravimetry (TG). Possible mechanisms of the decompositions are discussed.     

Vibrational spectra of α-Ge(HPO4)2·H2O compound

We have measured Raman and infrared spectra of α-Ge(HPO₄)₂·H₂O compound at room temperature. The analysis of vibrational modes indicated the presence of two non-equivalent HPO₄²⁻ units in agreement with ³¹P nuclear magnetic resonance measurements. A tentative assignment of all the observed modes is proposed based on the previous works reported for other hydrogenphosphate-based compounds.     

Low-temperature heat capacity and standard enthalpy of formation of neodymium glycine perchlorate complex [Nd2(Gly)6(H2O)4](ClO4)6·5H2O

Rare-earth perchlorate complex coordinated with glycine [Nd₂(Gly)₆(H₂O)₄](ClO₄)₆·5H₂O was synthesized and its structure was characterized by using thermogravimetric analysis (TG), differential thermal analysis (DTA), chemical analysis and elementary analysis. Its purity was 99.90%. Heat capacity measurement was carried out with a high-precision fully-automatic adiabatic calorimeter over the temperature range from 78 to 369 K. A solid-solid phase transformation peak was observed at 256.97 K, with the enthalpy and entropy of the phase transformation process are 4.438 kJ mol⁻¹ and 17.270 J K⁻¹ mol⁻¹, respectively. There is a big dehydrated peak appears at 330 K, its decomposition temperature, decomposition enthalpy and entropy are 320.606 K, 41.364 kJ mol⁻¹ and 129.018 J K⁻¹ mol⁻¹, respectively. The polynomial equations of heat capacity of this compound in different temperature ranges have been fitted. The standard enthalpy of formation was determined to be −8023.002 kJ mol⁻¹ with isoperibol reaction calorimeter at 298.15 K.     

The reaction of MgCl2·4H2O with CCl2F2

A new reaction of MgCl₂·4H₂O with CCl₂F₂ is investigated by DTA and TG from room temperature to 350 °C. It is observed that MgF₂ was obtained between 252 and 350 °C, Below the temperature, MgCl₂·4H₂O dehydrates and hydrolyzes to MgCl₂ and Mg(OH)Cl, which are the real reactants of the reaction with CCl₂F₂. The formation of MgF₂ is ascribed to the reaction of MgCl₂ and Mg(OH)Cl with HF, which forms by decomposition of CCl₂F₂ with the taking part in of H₂O released from dehydration of hydrated magnesium chloride on the surface of MgCl₂ and Mg(OH)Cl, which catalyzes the decomposition of CCl₂F₂ in this case. Consequently, the reactions are tested in the fluid-bed condition. It is found that MgF₂ formed at temperatures down to 200 °C in a fluid-bed reactor. This reaction may be used as a method of disposing of the environmentally sensitive CCl₂F₂ (rather than release into the atmosphere). It is also a method for the preparation of MgF₂.     

Vibrational spectra of Cs2CaCl4·2H2O

The Fourier transform infrared spectra of Cs₂CaCl₄·2H₂O as well as those of a series of its partially deuterated analogues were recorded at room and at liquid-nitrogen temperature (RT and LNT, respectively). The RT Raman spectra of the protiated form and of its almost completely deuterated analogue were also studied. The combined results from the analysis of the spectra were used to assign the observed bands. The mechanical anharmonicity of the OH(D) stretching and bending motions were further analyzed by computing the corresponding anharmonicity constants by several algorithms. The obtained trends in the series of structurally similar compounds were discussed.     

IR-analysis of H-bonded H2O on the pure TiO2 surface

The surface state of optically pure polydisperse TiO₂ (anatase and rutile) was determined by infra-red (IR) spectroscopy analysis in the temperature range of 100–453 K. Anatase A300 spectrum, contrary to rutile R300 one, has a broad three-component absorption band with peaks at 1048, 1137 and 1222 cm⁻¹ in the spectral range of δ(Ti–O–H) deformation vibrations. For rutile R300 we observed a very weak band at 1047 cm⁻¹, and for the thermal treated rutile R900 these bands were not appeared at all. The analysis of temperature dependencies for the mentioned absorption bands revealed the spectral shift of 1222 cm⁻¹ band towards the high frequencies, when the temperature increased, but the spectral parameters of 1137 and 1048 cm⁻¹ bands remained the same. The temperature of 1222 cm⁻¹ band maximum shift was 373–393 K and correlated with DSC data. Obtained results allowed to assign 1222 cm⁻¹ band to the deformation vibrations of OH-groups, bounded to the surface adsorbed water molecules by weak hydrogen bonds (5 kcal/mol). During the temperature growth these molecules desorbed, which also resulted in the intensity decreasing of stretching OH-groups vibration IR-bands at 3420 cm⁻¹. The destruction and desorption of surface water complexes led to Ti–O–H bond strengthening. IR bands at 1137 and 1048 cm⁻¹ were attributed to the stronger bounded adsorbed water molecules, which are also characterized with stretching OH-groups vibration bands at 3200 cm⁻¹. These surface structure were additionally stabilized by hydrogen bonds with the neighbouring TiO₂ lattice anions and other OH-groups, and desorbed at higher temperatures.     

Synthesis, heat capacity and enthalpy of formation of [Ho2(l-Glu)2(H2O)8](ClO4)4·H2O

A complex of holmium perchlorate coordinated with l-glutamic acid, [Ho₂(l-Glu)₂(H₂O)₈](ClO₄)₄·H₂O, was prepared with a purity of 98.96%. The compound was characterized by chemical, elemental and thermal analysis. Heat capacities of the compound were determined by automated adiabatic calorimetry from 78 to 370 K. The dehydration temperature is 350 K. The dehydration enthalpy and entropy are 16.34 kJ mol⁻¹ and 16.67 J K⁻¹ mol⁻¹, respectively. The standard enthalpy of formation is −6474.6 kJ mol⁻¹ from reaction calorimetry at 298.15 K.     

Thermochemistry of NaRb[B4O5(OH)4]·4H2O

The enthalpies of solution of NaRb[B₄O₅(OH)₄]·4H₂O in approximately 1 mol dm⁻³ aqueous hydrochloric acid and of RbCl in aqueous (hydrochloric acid + boric acid + sodium chloride) were determined. From these results and the enthalpy of solution of H₃BO₃ in approximately 1 mol dm⁻³ HCl(aq) and of sodium chloride in aqueous (hydrochloric acid + boric acid), the standard molar enthalpy of formation of −(5128.02 ± 1.94) kJ mol⁻¹ for NaRb[B₄O₅(OH)₄]·4H₂O was obtained from the standard molar enthalpies of formation of NaCl(s), RbCl(s), H₃BO₃(s) and H₂O(l). The standard molar entropy of formation of NaRb[B₄O₅(OH)₄]·4H₂O was calculated from the Gibbs free energy of formation of NaRb[B₄O₅(OH)₄]·4H₂O computed from a group contribution method.     

Hydrothermal synthesis, characterization and thermochemistry of Ca2[B2O4(OH)2]·0.5H2O

A pure calcium borate Ca₂[B₂O₄(OH)₂]·0.5H₂O has been synthesized under hydrothermal condition and characterized by XRD, FT-IR and TG as well as by chemical analysis. The molar enthalpy of solution of Ca₂[B₂O₄(OH)₂]·0.5H₂O in HC1·54.582H₂O was determined. From a combination of this result with measured enthalpies of solution of H₃BO₃ in HC1·54.561H₂O and of CaO in (HCl + H₃BO₃) solution, together with the standard molar enthalpies of formation of CaO(s), H₃BO₃(s) and H₂O(l), the standard molar enthalpy of formation of −(3172.5 ± 2.5) kJ mol⁻¹ of Ca₂[B₂O₄(OH)₂]·0.5H₂O was obtained.     

Crystal structure and characterization of Rb2Ca[B4O5(OH)4]2·8H2O

Dirubidium calcium tetraborate octahydrate, Rb₂Ca[B₄O₅(OH)₄]₂·8H₂O, was prepared by reaction of Rb-borate aqueous solution with CaCl₂ and it's structure has been determined by single-crystal X-ray diffraction data. It crystallizes in the orthorhombic system, space group P2₁2₁2₁ with unit cell parameters, Z=4, The structure contains alternate layers of [B₄O₅(OH)₄]²⁻ polyanions separated by water molecules and Rb, Ca cations. The isolated [B₄O₅(OH)₄]²⁻ is constructed from two BO₃(OH) tetrahedron groups and two BO₂(OH) triangular groups joined at common oxygen atoms. The two BO₃(OH) tetrahedron groups are further linked by means of an oxygen bridge across the ring. The Ca²⁺ ion displays seven coordination, while the two non-equivalent Rb⁺ ions display nine and seven coordination, respectively. Infrared and Raman (4000-400 cm⁻¹) spectra of Rb₂Ca[B₄O₅(OH)₄]₂·8H₂O were recorded at room temperature and analyzed. Fundamental vibrational modes were identified and band assignments were made. The dehydration of this hydrated mixed borate occurs in one step and leads to an amorphous phase which undergoes a crystallization.     

丙炴醇聚合膜对铁在酸性溶液中的缓蚀作用

The formation of polymer film of propargyl alcohol(PA) and its protective ability against corrosion in Fe/H_2SO_4 and Fe/H_2SO_4+H_2S systems have been investigated using impedance measurement. The composition and morphology of the corrosion surface of iron, on which PA polymerized at different bines, were obtained with the aid of SEM and AFM as well as EDX. The results showed that PA polymerized into compact polymer film in Fe/H_2SO_4 and Fe/ H_2SO_4 + H_2S systems, which made iron surface smooth and have a morphologies of regular square structure in microscopic level. In Fe/H_2SO_4 system, macroscopic continuous polymer film of PA was not formed leading to local corrosion on electrode surface. In Fe/H_2SO_4 +H_2S system, the adsorption of H_2S and HS - on electrode surface slowed down the formation of polymer film of PA. However, the iron sulfide, produced after a longer time, increased the continuity of the polymer film of PA and therefore, the polymer film could perform its long-te...更多rm inhibition action.     

Solubility of (UO2)3(PO4)2?4H2O in H+-Na+-OH?-H2PO?4-HPO2?4-PO3?4-H2O and Its Comparison to the Analogous PuO2 +2 System

The objectives of this study were to address uncertainties in the solubility product of (UO₂)₃(PO₄)₂⋅4H₂O(c) and in the phosphate complexes of U(VI), and more importantly to develop needed thermodynamic data for the Pu(VI)-phosphate system in order to ascertain the extent to which U(VI) and Pu(VI) behave in an analogous fashion. Thus studies were conducted on (UO₂)₃(PO₄)₂⋅4H₂O(c) and (PuO₂)₃(PO₄)₂⋅4H₂O(am) solubilities for long-equilibration periods (up to 870 days) in a wide range of pH values (2.5 to 10.5) at fixed phosphate concentrations of 0.001 and 0.01 M, and in a range of phosphate concentrations (0.0001–1.0 M) at fixed pH values of about 3.5. A combination of techniques (XRD, DTA/TG, XAS, and thermodynamic analyses) was used to characterize the reaction products. The U(VI)-phosphate data for the most part agree closely with thermodynamic data presented in Guillaumont et al.,⁽¹⁾ although we cannot verify the existence of several U(VI) hydrolyses and phosphate species and we find the reported value for formation constant of UO₂PO⁻₄ is in error by more than two orders of magnitude. A comprehensive thermodynamic model for (PuO₂)₃(PO₄)₂⋅4H₂O(am) solubility in the H⁺-Na⁺-OH⁻-Cl⁻-H₂PO⁻₄-HPO²⁻₄-PO³⁻₄-H₂O system, previously unavailable, is presented and the data shows that the U(VI)-phosphate system is an excellent analog for the Pu(VI)-phosphate system.     

Thermodynamic properties of hydrated sodium l-threonate Na(C4H7O5)·H2O(s)

Low-temperature heat capacities of the compound Na(C₄H₇O₅)·H₂O(s) have been measured with an automated adiabatic calorimeter. A solid-solid phase transition and dehydration occur at 290-318 K and 367-373 K, respectively. The enthalpy and entropy of the solid-solid transition are Δ_transH_m = (5.75 ± 0.01) kJ mol⁻¹ and Δ_transS_m = (18.47 ± 0.02) J K⁻¹ mol⁻¹. The enthalpy and entropy of the dehydration are Δ_dH_m = (15.35 ± 0.03) kJ mol⁻¹ and Δ_dS_m = (41.35 ± 0.08) J K⁻¹ mol⁻¹. Experimental values of heat capacities for the solids (I and II) and the solid-liquid mixture (III) have been fitted to polynomial equations.     

The crystal structure determinations and refinements of K2S2O7, KNaS2O7 and Na2S2O7 from X-ray powder and single crystal diffraction data

The crystal structures of K₂S₂O₇, KNaS₂O₇ and Na₂S₂O₇ have been solved and/or refined from X-ray synchrotron powder diffraction data and conventional single-crystal data. K₂S₂O₇: From powder diffraction data, monoclinic C2/c, Z=4, a=12.3653(2), b=7.3122(1), , β=93.0792(7)°, R_Bragg=0.096. KNaS₂O₇: From powder diffraction data; triclinic , Z=2, a=5.90476(9), b=7.2008(1), , α=101.7074(9), β=90.6960(7), γ=94.2403(9)°, R_Bragg=0.075. Na₂S₂O₇: From single-crystal data; triclinic , Z=2, a=6.7702(9), b=6.7975(10), , α=116.779(2), β=96.089(3), γ=84.000(3)°, R_F=0.033. The disulphate anions are essentially eclipsed. All three structures can be described as dichromate-like, where the alkali cations coordinate oxygens of the isolated disulphate groups in three-dimensional networks. The K-O and Na-O coordinations were determined from electron density topology and coordination geometry. The three structures have a cation-disulphate chain in common. In K₂S₂O₇ and Na₂S₂O₇ the neighbouring chains are antiparallel, while in KNaS₂O₇ the chains are parallel. The differences between the K₂S₂O₇ and Na₂S₂O₇ structures, with double-, respectively single-sided chain connections and straight, respectively, corrugated structural layers can be understood in terms of the differences in size and coordinating ability of the cations.     

Synthesis, crystal structure, infrared and Raman spectra of Sr4Cu3(AsO4)2(AsO3OH)4·3H2O and Ba2Cu4(AsO4)2(AsO3OH)3

The two new compounds, Sr₄Cu₃(AsO₄)₂(AsO₃OH)₄·3H₂O (1) and Ba₂Cu₄(AsO₄)₂(AsO₃OH)₃(2), were synthesized under hydrothermal conditions. They represent previously unknown structure types and are the first compounds synthesized in the systems SrO/BaO-CuO-As₂O₅-H₂O. Their crystal structures were determined by single-crystal X-ray diffraction [space group C2/c, a=18.536(4) Å, b=5.179(1) Å, c=24.898(5) Å, β=93.67(3)°, V=2344.0(8) Å³, Z=4 for 1; space group P4₂/n, a=7.775(1) Å, c=13.698(3) Å, V=828.1(2) Å³, Z=2 for 2]. The crystal structure of 1 is related to a group of compounds formed by Cu²⁺-(XO₄)³⁻ layers (X=P⁵⁺, As⁵⁺) linked by M cations (M=alkali, alkaline earth, Pb²⁺, or Ag⁺) and partly by hydrogen bonds. In 1, worth mentioning is the very short hydrogen bond length, D···A=2.477(3) Å. It is one of the examples of extremely short hydrogen bonds, where the donor and acceptor are crystallographically different. Compound 2 represents a layered structure consisting of Cu₂O₈ centrosymmetric dimers crosslinked by As1φ₄ tetrahedra, where φ is O or OH, which are interconnected by Ba, As2 and hydrogen bonds to form a three-dimensional network. The layers are formed by Cu₂O₈ centrosymmetric dimers of CuO₅ edge-sharing polyhedra, crosslinked by As1O₄ tetrahedra. Vibrational spectra (FTIR and Raman) of both compounds are described. The spectroscopic manifestation of the very short hydrogen bond in 1, and ABC-like spectra in 2 were discussed.     

Two Ce(SO4)2·4H2O polymorphs: Crystal structure and thermal behavior

Syntheses, crystal structures and thermal behavior of two polymorphic forms of Ce(SO₄)₂·4H₂O are reported. The first modification, α-Ce(SO₄)₂·4H₂O (I), crystallizes in the orthorhombic space group Fddd, with a=5.6587(1), b=12.0469(2), c=26.7201(3) Å and Z=8. The second modification, β-Ce(SO₄)₂·4H₂O (II), crystallizes in the orthorhombic space group Pnma, with a=14.6019(2), b=11.0546(2), c=5.6340(1) Å and Z=4. In both structures, the cerium atoms have eight ligands: four water molecules and four sulfate groups. The mutual position of the ligands differs in (I) and (II), resulting in geometrical isomerism. Both these structures are built up by layers of Ce(H₂O)₄(SO₄)₂ held together by a hydrogen bonding network. The dehydration of Ce(SO₄)₂·4H₂O is a two step (I) and one step (II) process, respectively, forming Ce(SO₄)₂ in both cases. During the decomposition of the anhydrous form, Ce(SO₄)₂, into the final product CeO₂, intermediate xCeO₂·yCe(SO₄)₂ species are formed.     

NMR relaxation study of the phase transitions and relaxation mechanisms of the alums MCr(SO4)2·12H2O (M=Rb and Cs) single crystals

The physical properties and phase transition mechanisms of MCr(SO₄)₂·12H₂O (M=Rb and Cs) single crystals have been investigated. The phase transition temperatures, NMR spectra, and the spin-lattice relaxation times T₁ of the ⁸⁷Rb and ¹³³Cs nuclei in the two crystals were determined using DSC and FT NMR spectroscopy. The resonance lines and relaxation times of the ⁸⁷Rb and ¹³³Cs nuclei undergo significant changes at the phase transition temperatures. The sudden changes in the splitting of the Rb and Cs resonance lines are attributed to changes in the local symmetry of their sites, and the changes in the temperature dependences of T₁ are related to variations in the symmetry of the octahedra of water molecules surrounding Rb⁺ and Cs⁺. We also compared these ⁸⁷Rb and ¹³³Cs NMR results with those obtained for the trivalent cations Cr and Al in MCr(SO₄)₂·12H₂O and MAl(SO₄)₂·12H₂O crystals.     

稀土脯氨酸配合物[RE2(L-Pro)6(H2O)4](ClO4)6的标准生成焓测定

合成了两种稀土高氯酸盐与L 脯氨酸配合物的晶体.经热重、差热、化学分析及对比有关文献,知其组成是[Pr2(L Pro)6(H2O)4](ClO4)6和[Er2(L Pro)6(H2O)4](ClO4)6,质量分数为99.24％和98.20％.选用RE(NO3)3•6H2O(RE=Pr,Er)、L Pro、NaClO4•H2O和NaNO3作辅助物,使用具有恒温环境的反应热量计,以2 mol•L－1 HCl作溶剂,分别测定了[2RE(NO3)3•6H2O＋6L Pro＋6NaClO4•H2O]和{[RE2(L PrO)6(H2O)4](ClO4)6＋6NaNO3}在298.15 K时的溶解热.设计一热化学循环求得化学反应的反应焓ΔrHm分别是：63.904 kJ•mol－1和91.017 kJ•mol－1,经计算得配合物[RE2(L Pro)6(H2O)4](ClO4)6(s)在298.15 K时的标准生成焓ΔfHm(298.15 K)分别是－6 594.78 kJ•mol－1和－6 532.87 kJ•mol－1.     

真空辅助法合成Fe_3(PO_4)_2·8H_2O及对LiFePO_4/C结构、形貌和电化学性能的影响(英文)

采用了一种真空辅助沉淀法制备Fe3(PO4)2·8H2O,并以此进一步合成粒径尺寸在400 nm左右LiFePO4颗粒.研究了Fe3(PO4)2·8H2O对于磷酸铁锂的形貌、结构、电化学性能的影响.X射线衍射(XRD)结果表明,真空辅助制备的Fe3(PO4)2·8H2O具有高纯度,以此制备的LiFePO4具有高结晶度和纯度.扫描电子显微镜(SEM)结果表明,真空辅助制备的Fe3(PO4)2·8H2O具有未完全发育的颗粒,以此制备的LiFePO4均匀无硬团聚.透射电子显微镜(TEM)结果显示真空辅助制备的LiFePO4包覆一层均匀的碳.真空制备的LiFePO4显示了优异的电化学性能,在1C、10C、20C倍率下的容量分别为140、113、100 mAh·g-1.真空制备的LiFePO4的循环伏安曲线显示了小的极化电压和尖锐的氧化峰.充放电平台曲线表明真空对LiFePO4高倍率性能起到重要作用.电化学阻抗谱(EIS)计算结果显示,真空和非真空制备的LiFePO4的锂离子扩散系数分别为1.42×10-13和4.22×10-14cm2·s-1,说明真空辅助能够提高LiFePO4的扩散系数.