Electronic structure,geometry, and stability of organic cations,dications, and donor-acceptor complexes

Geometric, electronic, and energy characteristics of the complexes formed in the CF₄ ·nAIF₃ (n = I or 2) and CBr₄ ·nAIBr₃ (n = 1, 2, or 4) systems have been determined by the semiempirical AM I method. Besides the donor-acceptor complexes, the CBr₃ ⁺...AIBr₄ ^–, CBr₃ ⁺...Al₂Br₇ ^–, CBr2²⁺...(AlBr₄ ^–)₂, and CBr₂ ²⁺...(Al₂Br₇ ^–)₂ ionic complexes can be formed in the CBr₄ ·nAlBr₃ systems. In the cations and dications of polyhalomethanes (when Hal = Cl, Br, or l) in both the free and bound (included in ionic complexes) states, carbon atoms carry negative charges, the C-Hal bonds are substantially shortened, and the positive charges are located on one-coordinate halogen atoms. These cations and dications can be considered as halenium ions that differ from halenium salts with dicoordinate halogen atoms. In the cationic and dicationic complexes of the CBr₄ ·nAlBr₃ systems, the maximum positive charges on the Br atoms are 0.39 and 0.94, respectively. Fluorine-containing cations and dications have structures similar to those of carbenium ions, whereas in the CF₄ ·nAIF₃ systems (n = l or 2), only donor-acceptor complexes are formed.Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya. No. 3, pp. 554–560, March, 1996.     

Synthesis, characterization, and reactivity of half-sandwich Ru(II) complexes containing phosphine, arsine, stibine, and bismutine ligands

The synthesis and some reactions of the Ru(II) and Ru(IV) half-sandwich complexes [RuCp(EPh₃)(CH₃CN)₂]⁺ (E=P, As, Sb, Bi) and [RuCp(EPh₃)(η³-C₃H₅)Br]⁺ have been investigated. The chemistry of this class of compounds is characterized by a competitive coordination of EPh₃ either via a RuE or a η⁶-arene bond, where the latter is favored when the former is weaker, that is in going down the series. Thus in the case of Bi, the starting material [RuCp(CH₃CN)₃]⁺ does not react with BiPh₃ to give [RuCp(BiPh₃)(CH₃CN)₂]⁺ but instead gives only the η⁶-arene species [RuCp(η⁶-PhBiPh₂)]⁺ and [(RuCp)₂(μ-η⁶,η⁶-Ph₂BiPh)]²⁺. Similarly, the EPh₃ ligand can be replaced by an aromatic solvent or an arene substrate. Thus, the catalytic performance of [RuCp(EPh₃)(CH₃CN)₂]⁺ for the isomerization of allyl-phenyl ethers to the corresponding 1-propenyl ethers is best with E=P, while the conversion drops significantly using the As and Sb derivatives. By the same token, only [RuCp(PPh₃)(CH₃CN)₂]⁺ is stable in a non-aromatic solvent, whereas both [RuCp(AsPh₃)(CH₃CN)₂]⁺ and [RuCp(SbPh₃)(CH₃CN)₂]⁺ rearrange upon warming to [RuCp(η⁶-PhEPh₂)]⁺ and related compounds. In addition, the potential of [RuCp(EPh₃)(CH₃CN)₂]⁺ as precatalysts for the transfer hydrogenation of acetophenone and cyclohexanone has been investigated. Again aromatic substrates are clearly less suited than non-aromatic ones due to facile η⁶-arene coordination leading to catalyst's deactivation.     

Rearrangements of cyclopentadienyl cyanates,isocyanates and their thio-,seleno-, and telluro-analogs

Dynamic NMR spectroscopy revealed that pentaphenylcyclopentadienyl isoselenocyanate undergoes reversible hetero-Cope rearrangement (ΔG ^≠ _{408 K} ∼ 22 kcal mol⁻¹, C₆D₅CD₃) giving isomeric selenocyanate in which 1,5-sigmatropic shifts of the SeCN group along the perimeter of the cyclopentadiene ring occur (ΔG ^≠ _{298 K} = 16.7 kcal mol⁻¹, C₆D₅CD₃). On the contrary, pentaphenylcyclopentadienyl iso(thio)cyanates Ph₅C₅NCO and Ph₅C₅NCS are structurally rigid compounds on the NMR time scale. The energy barrier to the 3,3-shift of the isoselenocyanate group in pentaphenylcyclopentadienyl derivative Ph₅C₅NCSe (ΔG _{298 K} ^≠ = 17.9 kcal mol⁻¹) caclulated using the B3LYP/6-31G** method is 7.6 kcal mol⁻¹ lower than for the unsubstituted analog H₅C₅NCSe.     

Electrochemical Reduction of Pentafluorophenylxenonium, -diazonium, -iodonium, -bromonium,and -phosphonium Salts

Cyclic voltammetry measurements on pentafluorophenylonium compounds of [C₆F₅X]⁺ Y^– type with X = Xe, N₂, C₆F₅Br, C₆F₅I, and (C₆F₅)₃P were carried out. In these series [C₆F₅Xe]⁺ shows the lowest and [(C₆F₅)₄P]⁺ the highest reduction potential. One electron reduction of [C₆F₅Xe]⁺ and [C₆F₅N₂]⁺ followed by the loss of Xe or N₂, respectively, leads to the generation of the [C₆F₅] ^· radical. Favoured following reactions of the [C₆F₅] ^· radical are the abstraction of hydrogen from MeCN or dimerisation. After the first reduction step the other onium cations split off the pentafluorophenyl element molecule such as (C₆F₅)₃P, C₆F₅Br, or C₆F₅I, respectively. These molecules undergo further reductions. The low reduction potential of [C₆F₅Xe]⁺ is in contrast to former measurements on partially fluorinated or chlorinated phenylxenonium cations. A plausible explaination for the different behaviour of these Xe–C compounds in electrochemical reduction processes is given.     

Fluorides of Copper,Silver, Gold,and Palladium

Fluorine, by far the most reactive of the non-metals, is capable of forming a large number of compounds with nearly all other elements (exceptions (so far): He, Ne, and Ar), even under comparatively “mild” reaction conditions. These compounds usually differ markedly from those of the heavier halogens in composition, structure, and chemical and physical properties. Thus, for example, it is generally quite easy to prepare fluorides containing elements in high oxidation states (often their maximum), as in AgF₂, CsAgF₄, PdF₃, CsAuF₆ etc., whereas the corresponding chlorides, bromides or iodides are in many cases (still) unknown. Conversely, the synthesis of fluorides containing these elements in middle or low oxidation states often meets with considerable difficulty, even where it is possible at all, as, e.g., in the case of CuF, AuF, PtF₂, SeF₂. Finally, there are also some examples of compounds MX_n, which with X = F are stable, but with X = Cl are unstable or decompose easily (e.g. CoF₃/CoCl₃, VF₄/VCl₄, PbF₄/PbCl₄, AsF₅/AsCl₅). Consequently, fluorine compounds are of great general interest.     

Structure and Polymorphism of M(thd)3 (M = Al,Cr, Mn,Fe, Co,Ga, and In)

Formation, crystal structure, polymorphism, and transition between polymorphs are reported for M(thd)₃, (M = Al, Cr, Mn, Fe, Co, Ga, and In) [(thd)^– = anion of H(thd) = C₁₁H₂₀O₂ = 2, 2, 6, 6‐tetramethylheptane‐3, 5‐dione]. Fresh crystal‐structure data are provided for monoclinic polymorphs of Al(thd)₃, Ga(thd)₃, and In(thd)₃. Apart from adjustment of the M–O_k bond length, the structural characteristics of M(thd)₃ complexes remain essentially unaffected by change of M. Analysis of the M–O_k, O_k–C_k, and C_k–C_k distances support the notion that the M–O_k–C_k–C_k–C_k–O_k– ring forms a heterocyclic unit with σ and π contributions to the bonds. Tentative assessments according to the bond‐valence or bond‐order scheme suggest that the strengths of the σ bonds are approximately equal for the M–O_k, O_k–C_k, and C_k–C_k bonds, whereas the π component of the M–O_k bonds is small compared with those for the O_k–C_k, and C_k–C_k bonds. The contours of a pattern for the occurrence of M(thd)₃ polymorphs suggest that polymorphs with structures of orthorhombic or higher symmetry are favored on crystallization from the vapor phase (viz. sublimation). Monoclinic polymorphs prefer crystallization from solution at temperatures closer to ambient. Each of the M(thd)₃ complexes subject to this study exhibits three or more polymorphs (further variants are likely to emerge consequent on systematic exploration of the crystallization conditions). High‐temperature powder X‐ray diffraction shows that the monoclinic polymorphs convert irreversibly to the corresponding rotational disordered orthorhombic variant above some 100–150 °C (depending on M). The orthorhombic variant is in turn transformed into polymorphs of tetragonal and cubic symmetry before entering the molten state. These findings are discussed in light of the current conceptions of rotational disorder in molecular crystals.     

Zn11Rh18B8 and Zn10MRh18B8 with M = Sc,Ti, V,Cr, Mn,Fe, Co,Ni, Cu,Al, Si,Ge, Sn – New Ternary and Quaternary Zinc Rhodium Borides

Zn₁₁Rh₁₈B₈ and Zn₁₀MRh₁₈B₈ with M = Sc, Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Al, Si, Ge and Sn are obtained by reaction of the elemental components in sealed tantalum tubes at 1500 K. They crystallize tetragonally with Z = 2 in the spacegroup P4/mbm with lattice constants a = 1771.2(2) pm, c = 286.40(4) pm for Zn₁₁Rh₁₈B₈ and in the range a = 1767.65(9) pm, c = 285.96(3) pm (Zn₁₀NiRh₁₈B₈) to a = 1774.04(9) pm, c = 286.79(2) pm (Zn₁₀SnRh₁₈B₈) for the quaternary compounds. According to powder photographs all compounds are isotypic. Struture determinations based on single crystal X-ray data were performed with Zn₁₁Rh₁₈B₈, Zn₁₀FeRh₁₈B₈ and Zn₁₀NiRh₁₈B₈. The structure of Zn₁₁Rh₁₈B₈ is related to the Ti₃Co₅B₂ type. Along the short axis planar nets of rhodium atoms composed of triangles, squares, pentagons and elongated hexagons alternate with layers containing the boron and zinc atoms. The rhodium atoms form trigonal prisms centered by boron atoms, two kinds of tetragonal and pentagonal prisms centered by zinc atoms and elongated hexagonal prisms containing pairs of zinc atoms. In the quaternary compounds Zn₁₀MRh₁₈B₈ the zinc atoms in one sort of tetragonal prisms are replaced by M atoms.     

Synthesis, structure, solid-state thermolysis, and catalytic properties of binuclear Ce, Nd, Eu, and Gd cymantrenecarboxylate complexes with DMSO

New rare-earth cymantrenecarboxylate complexes [Ln₂(μ,η²-O₂CCym)₂(μ²-O₂CCym)₂-(η²-O₂CCym)₂(DMSO)₄] (Cym = (η⁵-C₅H₄)Mn(CO)₃, Ln = Ce (1), Nd (2), Eu (3), Gd (4)) were synthesized and characterized by X-ray diffraction. In dimeric structures 1–4, two of four bridging carboxylates are chelating-bridging, and Ln atoms have coordination number 9. The catalytic activity of complex 2 in the polymerization of 2,3-dimethyl-1,3-butadiene was investigated. The thermal decomposition of the synthesized compounds was studied by DSC and TGA. According to the X-ray powder diffraction data, the final thermal decomposition product of 1 in air consists of CeO₂ and Mn₃O₄. Under the same conditions, complexes 2–4 afford mixtures of LnMn₂O₅ and Mn₂O₃.     

Synthesis,Characterization, and Crystal Structures of Cu,Ag, and Pd Dinitramide Salts

The literature known, but not fully characterized, silver dinitramide transfer reagents AgN(NO₂)₂ ( 1 ), [Ag(NCCH₃)][N(NO₂)₂] ( 2 ), and [Ag(py)₂][N(NO₂)₂] ( 3 ) have been investigated by ¹⁰⁹Ag, ¹⁴N NMR and vibrational spectroscopy (IR, Raman). In addition, the poorly understood [Cu(NH₃)₄][N(NO₂)₂)]₂ ( 4 ) and [Pd(NH₃)₄][N(NO₂)₂]₂, ( 5 ) have also been prepared and characterized by ¹⁴N NMR and vibrational spectroscopy (IR, Raman). The structures of 2 — 5 have also been determined by X‐ray diffraction.     

Syntheses and Crystal Structures of BaAgTbS3, BaCuGdTe3, BaCuTbTe3, BaAgTbTe3, and CsAgUTe3

Five new quaternary chalcogenides of the 1113 family, namely BaAgTbS₃, BaCuGdTe₃, BaCuTbTe₃, BaAgTbTe₃, and CsAgUTe₃, were synthesized by the reactions of the elements at 1173–1273 K. For CsAgUTe₃ CsCl flux was used. Their crystal structures were determined by single‐crystal X‐ray diffraction studies. The sulfide BaAgTbS₃ crystallizes in the BaAgErS₃ structure type in the monoclinic space group C³,_2h‐C2/m, whereas the tellurides BaCuGdTe₃, BaCuTbTe₃, BaAgTbTe₃, and CsAgUTe₃ crystallize in the KCuZrS₃ structure type in the orthorhombic space group D¹_,2⁷_,h‐Cmcm. The BaAgTbS₃ structure consists of edge‐sharing [TbS₆^9–] octahedra and [AgS₅^9–] trigonal pyramids. The connectivity of these polyhedra creates channels that are occupied by Ba atoms. The telluride structure features ²_∞[MLnTe₃^2–] layers for BaCuGdTe₃, BaCuTbTe₃, BaAgTbTe₃, and ²_∞[AgUTe₃^1–] layers for CsAgUTe₃. These layers comprise [MTe₄] tetrahedra and [LnTe₆] or [UTe₆] octahedra. Ba or Cs atoms separate these layers. As there are no short Q ··· Q (Q = S or Te) interactions these compounds achieve charge balance as Ba²⁺M⁺Ln³⁺(Q^2–)₃ (Q = S and Te) and Cs⁺Ag⁺U⁴⁺(Te^2–)₃.     

Bromination of silatranyl-, germatranyl-, silyl-, and germyl-phenylacetylenes

Reactions of element-substituted alkynes R₃MCCPh (R₃M = Me₃Si, Et₃Si, Ph₃Si, Et₃Ge, n-Bu₃Sn, N(CH₂CH₂O)₃Si, N(CH₂CH₂O)₃Ge, N(CH₂-CHMeO)₃Ge, and N(CH₂CH₂O)₂(CH₂CHPhO)Ge) with bromine, tetra-n-butylammonium tribromide (TBAT), and N-bromosuccinimide (NBS)/DMSO were investigated. The Z,E-ratio of isomeric dibromoalkenes formed in bromination reaction with Br₂ and TBAT are discussed. The crystal structures of N(CH₂CH₂O)₃SiCCPh and N(CH₂CHMeO)₃GeX (X = C CPh, C(Br)C(Br)Ph, C(Br₂)C(O)Ph), and Ph₃SiC(Br)C(Br)Ph are reported. © 2003 Wiley Periodicals, Inc. 15:43–56, 2004; Published online in Wiley InterScience (www.interscience.wiley.com). DOI 10.1002/.hc10211     

Synthesis of thiols,disulfides, and sulfonic acids containing trichloromethyl,dichloro vinyl,and carboxy groups

Summary Starting from...-tetrachloroalkanes, trichloroalkenes of structure CCl₂=CH(CH₂)_nCl, and-chloro carboxylic acids, we obtained ithio, mercapto, and sulfo compounds and some of their derivatives of structure; [CCl₃(CH₂)₄]₂S₂; [CCl₂=CH(CH₂)₃]₂S₂; [ROOC(CH₂)₄]₂S₂ (in which ); CCl₃(CH₂)₄SCl; CCl₃(CH₂)_nSH (in which n=4,6,8); CCl₂=CH(CH₂)₃SH; ROOC(CH₂)₄SH (in which R=H, C₂H₅); CCl₃(CH₂)_nSO₃Na (in which n=4,6,8); C₂H₅OOC(CH₂)₄SO₃Na.     

Cadmium vanadates of potassium,rubidium, and cesium

The solid-phase reactions between the components have been used to study the equilibrium phase composition of the systems M₂O(M₂CO₃)-CdO-V₂O₅ (M = K, Rb, or Cs) in the range of the subsolidus temperatures. New potassium cadmium vanadates KCd₃V₃O₁₁, K₂Cd₅(VO₄)₄, and K₂Cd₄V₄O₁₅ have been synthesized. A monoclinic solid solution has been identified on the basis of the KCd₄(VO₄)₃ structure. Double orthovanadate RbCdVO₄ has been prepared for the first time. Equilibrium phase diagrams have been constructed using both previously known compounds, and those synthesized by us. The effect of the size factor (the M⁺ ion radius) on the phase formation and phase equilibria in the systems in question has been traced.     

Silylmethyl and related complexes II. Preparation,spectra, and thermolysis of the tetraneopentyls of titanium,zirconium, and hafnium

The preparation and characterisation of the Group IVA neopentyls (Me₃CCH₂)₄M (M = Ti, Zr, or Hf) is described. Spectroscopic data (IR, Raman, mass, ¹H NMR, and PE) are provided; IR and Raman bands have been assigned by comparison with results on Group IVB analogues (M = Ge or Sn). MC₄ stretching vibrations fall in the range 540–485 cm^?1, and bending modes at 240–283 cm^?1. Thermal decomposition gives neopentane as the sole detectable product; qualitatively, stability increases in the order M = Ti < Zr < Hf and for R₄M : R = Me ? Me₃CCH₂ ≈ Me₃SiCH₂. (Me₃CCH₂)₄Ti is aerobically oxidised in benzene to give (Me₃CCH₂O)₄Ti     

Rhenium trichloride,ReCl3, and its 5/3-hydrate synthesis,crystal structure,and thermal expansion

Single crystals of ReCl₃ were grown by vacuum sublimation and the crystal structure (trigonal, R3 m, a = 1020.62(5), c = 2035.3(2) pm, V_m = 61.430(8) cm³mol^?1) was refined to R = 0.049, R_w = 0.031. From hydrochloric acid solutions of ReCl₃ containing me₄NCl, the hydrete ReCl₃ · 5/3 H₂O is salted out: hexagonal, P6 2_c, a = 944.89(3), c = 1470.07(9) pm, V_m = 114.09(1) cm³ mol^?1. The crystal structure (R = 0.079, R_w = 0.051) contains hexagonally closest-packed [Re₃Cl₉(H₂O)₃] molecules held loosely together by two molecules of crystal water positioned between the clusters in the [00.1] direction thereby forming chains that are shifted against each other by 1/2c. Thermal expansion of ReCl₃, ReCl₃. 5/3 H₂O and RbReCl₄ has been recorded and is discussed in connection with the crystal structures.     

Synthesis,structure, and fungicidal activity of thia- and aza-ferrocenophanes

Reaction of bridging dicyclopentadienyl disodium E(CH₂COCpNa)₂ (E = S or NPh, Cp = cyclopentadienyl) with FeCl₂ yields thia- and aza-[5]ferrocenophanes E(CH₂COCp)₂Fe [E = S (1) and NPh (2)]. Treatment of C₁₄H₈(CH₂SCH₂COCpNa)₂ (C₁₄H₈ = 9,10-anthracenyl) with FeCl₂ affords dithia-[12]ferrocenophane C₁₄H₈(CH₂SCH₂COCp)₂Fe (3), while similar reaction of C₆H₄(CH₂SCH₂COCpNa)₂ (C₆H₄ = 1,4-phenyl) with FeCl₂ provides a mixture of dithia-[12]ferrocenophane C₆H₄(CH₂SCH₂COCp)₂Fe (4) and tetrathia-[12,12]ferrocenophane [C₆H₄(CH₂SCH₂COCp)₂Fe]₂ (5), which are separated easily by column chromatography. These five compounds were characterized by IR and NMR spectroscopic analyses and the structures of 2 and 3 were further confirmed by single crystal X-ray diffraction. The electrochemical behaviors of 1–4 were investigated by cyclic voltammetry. In addition, their fungicidal activities against Alternaria solani, Cercospora arachidicola, Physalospora piricola, and Botrytis cinerea were tested in vitro.     

Syntheses,Structures, and Biological Activity of NiII,PdII, and PtII Complexes with New Tetradentate Benzamidine Ligands

N‐(Dialkylthiocarbamoyl)benzimidoyl chlorides react with o‐(salicylidenimine)benzylamine with formation of a novel class of tetradentate benzamidine ligands (H₂L^Et and H₂L^Morph), which readily react with Ni(CH₃COO)₂, [PdCl₂(CH₃CN)₂], and [PtCl₂(PPh₃)₂] under formation of complexes of the composition [M(L^R)] [M = Ni ( 4 ), Pd ( 5 ), Pt ( 6 )]. In all complexes, H₂L^R is doubly deprotonated and bonded to the metal ion via its N₂OS donor set and establishes a distorted square‐planar coordination sphere. The antiproliferative effects of the compounds on MCF‐7 and Hep‐G2 cells were studied. The complexes of H₂L^Morph are generally more active than those of H₂L^Et. While H₂L^Et and its complexes exhibit stronger effects on the Hep‐G2 line, the corresponding compounds of H₂L^Morph show almost equal effects on the two cell lines. In each series of compounds, the cytotoxicity increases in the order H₂L^R << 4 < 5 < 6 .     

Synthesis,isomerization, and polymerization of mixed phosphoranimines

A series of phosphites were prepared bearing various combinations of phenoxy, methoxy, and trifluoroethoxy substituents. (PhO)₃P, (CF₃CH₂O)(PhO)₂P, (CF₃CH₂O)₂(PhO)P, and (CH₃OCH₂CH₂O)(PhO)₂P were polymerized during the course of the Staudinger reaction with azidotrimethylsilane to form low molecular weight polyphosphazenes. Similar reactions with (CH₃O)(CF₃CH₂O)₂P, (CH₃O)(PhO)₂P, (CH₃O)₂(CF₃CH₂O)P, (CH₃O)₂(PhO)P, and (CH₃O)₃P produced the desired phosphoranimine as well as the corresponding phosphoramidate isomer. Studies were performed on these systems in order to understand the nature of this isomerization. (CH₃O)(PhO)₂P (DOUBLE BOND) N (SINGLE BOND) Si(CH₃)₃ and (CH₃O)₂(PhO)P (DOUBLE BOND) N (SINGLE BOND) Si(CH₃)₃ polymerize at temperatures above 150°C. © 1996 John Wiley & Sons, Inc.     

Stannylene complexes of manganese,iron, and platinum

A number of stannylene complexes with different M: Sn ratios were obtained using various metals and substituents at the tin atom. The structures of the complexes were examined. A reaction of CpMn(CO)₂THF with (Ph₄As)⁺(SnCl₃)^? gave the ionic complex [Ph₄As]⁺[CpMn(CO)₂SnCl₃]^? (I). The action of C₆F₅MgBr on the complex C₅H₅Mn(CO)(NO)SnCl₃ produced C₅H₅Mn(CO)(NO)Sn(C₆F₅)₃ (II). Replacement of the Cl ions in the complex [CpFe(CO)₂]₂SnCl₂ by phenylacetylenide groups gave rise to the neutral complex [CpFe(CO)₂]₂Sn(C≡CPh)₂ (III). A reaction of (Dppm)PtCl₂ (Dppm is 1,1-bis(diphenylphosphino)methane) with SnCl₂ · 2H₂O in the presence of diglyme yielded the ionic complex [η³-CH₃O(CH₂)₂O(CH₂)₂OCH₃)SnCl]⁺[(η ²-Dppm)Pt(SnCl₃)₃]^? (IV). Transmetalation in a reaction of [(Dppe)₂CoCl][SnCl₃] · PhBr (Dppe is 1,2-bis(diphenylphosphino)ethane) with (Dcpd)PtCl₂ (Dcpd is dicyclopentadiene) in the presence of SnCl₂ afforded the ionic complex [Pt(Dppe)₂]₃[Pt(SnCl₃)₅]₂ (V). Structures I–V were identified by X-ray diffraction. In these structures, the formally single bonds between the atoms of transition metals M (Mn, Fe, and Pt) and Main Group heavy elements (Sn and P) having vacant d orbitals are appreciably shortened. The M-Sn bond length in complexes II and III are virtually independent of the substituents at the tin atom and the Pt-Sn bond length in complexes IV and V is virtually independent of the Pt: Sn ratio.