A highly selective turn-on colorimetric, red fluorescent sensor for detecting mobile zinc in living cells

We describe ZRL1, a turn-on colorimetric and red fluorescent zinc ion sensor. The Zn(2+)-promoted ring opening of the rhodamine spirolactam ring in ZRL1 evokes a 220-fold fluorescence turn-on response. In aqueous media, ZRL1 turn-on luminescence is highly selective for Zn(2+) ions, with no significant response to other competitive cations, including Na(+), K(+), Ca(2+), Mg(2+), Mn(2+), Fe(2+), Co(2+), Ni(2+), Cu(2+), Cd(2+), or Hg(2+). In addition to these characteristics, preliminary results indicate that ZRL1 can be delivered to living cells and can be used to monitor changes in intracellular Zn(2+) levels.     

A selective fluorescent sensor for detecting lead in living cells

We present the synthesis, properties, and biological applications of Leadfluor-1 (LF1), a new water-soluble, turn-on fluorescent sensor that is capable of selectively imaging Pb2+ in aqueous solution and in living cells. LF1 combines a fluorescein chromophore and a pseudocrown receptor to provide good selectivity for Pb2+ over a range of biologically and environmentally relevant metal ions in aqueous solution, with sensitivity to parts per billion EPA limits for allowable lead in drinking water. In addition to these attributes, imaging experiments further show that LF1 is the first small-molecule reagent that can be delivered into living cells and report changes in intracellular Pb2+ levels.     

Selective turn-on fluorescent probes for imaging hydrogen sulfide in living cells

Hydrogen sulfide (H(2)S) is an important biological messenger but few biologically-compatible methods are available for its detection. Here we report two bright fluorescent probes that are selective for H(2)S over cysteine, glutathione and other reactive sulfur, nitrogen, and oxygen species. Both probes are demonstrated to detect H(2)S in live cells.     

BODIPY based fluorescent turn-on sensor for highly selective detection of HNO and the application in living cells

On the basis of BODIPY platform, a terpyridyl-substituent BODIPY-Copper complex (Cu(II)-BTPY) was rationally designed and synthesized as a redox reaction fluorescent sensor for detecting HNO over reactive oxygen species (ROS) and reactive nitrogen species (RNS) with impressive selectivity in living cells under mild and neutral conditions. The BTPY exhibits relatively high fluorescence quantum efficiency as much as 34.8% and presents large stokes shift, about 62 nm. When a series of transition metal ions were exploited to investigate the fluorescence quench towards BTPY, copper ion (Cu²⁺) gave the optimal result. After the fluorescence of the probe being effectively quenched in the presence of Cu²⁺, it can be in turn recovered through the reduction of Cu²⁺ into Cu⁺ by HNO accompanying with a visually observable fluorescence response. Still, the sensing mechanism was evidently confirmed by EPR and ESI-MS measurement. In addition, the employment of BTPY for imaging dyes was also presented in vivo.     

A 1,8-naphthalimide-derived turn-on fluorescent probe for imaging lysosomal nitric oxide in living cells

Nitric oxide has played an important role in many physiological and pathological processes as a kind of important gas signal molecules. In this work, a new fluorescent probe LysoNO-Naph for detecting NO in lysosomes based on 1,8-naphthalimide was reported. LysoNO-Naph has sub-groups of o-phenylenediamine as a NO reaction site and 4-(2-aminoethyl)-morpholine as a lysosome-targetable group. This probe exhibited good selectivity and high sensitivity (4.57 μmol/L) toward NO in a wide pH range from 4 to 12. Furthermore, LysoNO-Naph can be used for imaging NO in lysosomes in living cells.     

A naphthalene-based Al3+ selective fluorescent sensor for living cell imaging

An efficient fluorescent Al(3+) receptor, N-(2-hydroxy-1-naphthalene)-N'-(2-(2-hydroxy-1-naphthalene)amino-ethyl)-ethane-1,2-diamine (L) has been synthesized by the condensation reaction between 2-hydroxy naphthaldehyde and diethylenetriamine. High selectivity and affinity of L towards Al(3+) in ethanol (EtOH) as well as in HEPES buffer at pH 7.4, makes it suitable to detect intracellular Al(3+) with fluorescence microscopy. Metal ions, viz. Li(+), Na(+), K(+), Mg(2+), Ca(2+), Mn(2+), Co(2+), Ni(2+), Cu(2+), Zn(2+), Ag(+), Cd(2+), Hg(2+) and Pb(2+) do not interfere. The lowest detection limit for Al(3+) is 3.0 × 10(-7) M and 1.0 × 10(-7) M in EtOH and HEPES buffer respectively.     

A selective turn-on fluorescent sensor for Fe and application to bioimaging

A novel compound FD1 was demonstrated as a turn-on fluorescent sensor for imaging of iron(III) ion in biological samples. Based on the spirolactam (nonfluorescence) to ring-open amide (fluorescence) equilibrium, FD1 exhibited high selectivity and sensitivity for Fe³⁺ over other metal ions. Moreover, fluorescent microscopy experiments further established that FD1 could be used for sensing Fe³⁺ within living cells.     

A selective fluorescent probe for carbon monoxide imaging in living cells

A genetically encoded fluorescent probe is capable of selectively detecting carbon monoxide inside living cell. The probe, named COSer (CO sensor), consists of a circularly permuted yellow fluorescent protein (cpYFP) inserted into the regulatory domain of the bacterial CO-sensing protein, CooA, which gives the probe its selective CO-binding property.     

A fast,highly selective and sensitive dansyl-based fluorescent sensor for copper (II) ions and its imaging application in living cells

Since the copper ions (Cu²⁺) play a fatal role in many foundational physiological processes, it is important to develop a simple, highly sensitive and selective sensor for Cu²⁺ detection in living systems. Herein, an intramolecular charge transfer (ICT) and dansyl-based fluorescent chemosensor 1 was designed, synthesized and characterized for the sensitive and selective quantification of Cu²⁺. It exhibited remarkable fluorescence quenching upon addition of Cu²⁺ over other selected metal ions, attributed to the complex formation between 1 and Cu²⁺ with the association constant 6.7 × 10⁵ M^?1. The sensor 1 showed a fast and linear response towards Cu²⁺ in the concentration range from 0 to 12.5 × 10^?6 mol L^?1 with the detection limit of 2.5 × 10^?7 mol L^?1. This detection could be carried out in a wide pH range of 5.0–14. Furthermore, sensor 1 can be used for detecting Cu²⁺ in living cells.     

A highly selective turn-on fluorescent chemosensor for copper(II) ion

A new pyrene derivative (1) containing a diaminomaleonitrile moiety exhibits high selectivity for Cu²⁺ detection. Significant fluorescence enhancement was observed with chemosensor 1 in the presence of Cu²⁺. However, the metal ions Ag⁺, Ca²⁺, Cd²⁺, Co²⁺, Fe²⁺, Fe³⁺, Hg²⁺, Mg²⁺, Mn²⁺, Ni²⁺, Pb²⁺, and Zn²⁺ produced only minor changes in fluorescence values for the system. The apparent association constant (K_a) of Cu²⁺ binding in chemosensor 1 was found to be 5.55×10³ M⁻¹. The maximum fluorescence enhancement caused by Cu²⁺ binding in chemosensor 1 was observed over the pH range 5-7.5.     

A highly selective OFF-ON fluorescent sensor for zinc in aqueous solution and living cells

A novel compound, 2-p-tolyl-1H-imidazo[4,5-f][1,10]phenanthrolinium hydrogenselenite (HMPIP·HSeO(3), C1), shows a peculiar OFF-ON fluorescent response to Zn(2+) in aqueous solution and living cells.     

A selective fluorescent turn-on NIR probe for cysteine

A selective and sensitive turn-on fluorescent NIR probe for cysteine has been developed. Cleavage of 2,4-dinitrobenzenesulfonyl (DNBS) with thiols switches the weakly fluorescent aza-BODIPY dye (λ(em) = 734 nm, Φ(f) = 0.03) to a strongly fluorescent species in the NIR region (λ(em) = 755 nm, Φ(f) = 0.14).     

A highly selective fluorescent chemosensor for zinc ion and imaging application in living cells

A new 2,6-bis(5,6-dihydrobenzo[4,5]imidazo[1,2-c]quinazolin-6-yl)-4-methylphenol (1) serves as a highly selective and sensitive fluorescent probe for Zn(2+) in a HEPES buffer (50 mM, DMSO:water = 1:9 (v/v), pH = 7.2) at 25 °C. The increase in fluorescence in the presence of Zn(2+) is accounted for by the formation of dinuclear Zn(2+) complex [Zn(2)(C(35)H(25)N(6)O)(OH)(NO(3))(2)(H(2)O)] (2), characterized by X-ray crystallography. The fluorescence quantum yield of the chemosensor 1 is only 0.019, and it increases more than 12-fold (0.237) in the presence of 2 equiv of the zinc ion. Interestingly, the introduction of other metal ions causes the fluorescence intensity to be either unchanged or weakened. By incubation of cultured living cells (A375 and HT-29) with the chemosensor 1, intracellular Zn(2+) concentrations could be monitored through selective fluorescence chemosensing.     

Reaction-based fluorescent probes for selective imaging of hydrogen sulfide in living cells

Hydrogen sulfide (H(2)S) is emerging as an important mediator of human physiology and pathology but remains difficult to study, in large part because of the lack of methods for selective monitoring of this small signaling molecule in live biological specimens. We now report a pair of new reaction-based fluorescent probes for selective imaging of H(2)S in living cells that exploit the H(2)S-mediated reduction of azides to fluorescent amines. Sulfidefluor-1 (SF1) and Sulfidefluor-2 (SF2) respond to H(2)S by a turn-on fluorescence signal enhancement and display high selectivity for H(2)S over other biologically relevant reactive sulfur, oxygen, and nitrogen species. In addition, SF1 and SF2 can be used to detect H(2)S in both water and live cells, providing a potentially powerful approach for probing H(2)S chemistry in biological systems.     

A two-photon fluorescent turn-on probe for imaging of SO2 derivatives in living cells and tissues

SO₂ and its derivatives (bisulfite/sulfite) play crucial roles in several physiological processes. Therefore, development of reliable analytical methods for monitoring SO₂ and its derivatives in biological systems is very significant. In this paper, a FRET-based two-photon fluorescent turn-on probe, A-HCy, was proposed for specific detection of SO₂ derivatives through the bisulfite/sulfite-promoted Michael addition reaction. In this FRET system, an acedan (2-acetyl-6-dialkylaminonaphthalene) moiety was selected as a two-photon donor and a hemicyanine derivative served as both the quencher and the recognition unit for bisulfite/sulfite. A-HCy exhibited excellent selectivity and rapid response to HSO₃⁻ with a detection limit of 0.24 μM. More importantly, probe A-HCy was first successfully applied in two-photon fluorescence imaging of biological SO₂ derivatives in living cells and tissues, suggesting its great potential for practical application in biological systems.     

A novel HPQ-based turn-on fluorescent probe for detection of fluoride ions in living cells

2-(2′-Hydroxyphenyl)-4(3H)-quinazolinone (HPQ) has been reported as a precipitating fluorescent molecule with excellent optical properties, such as large Stokes shift and strong fluorescence intensity. HPQF, a novel HPQ-based turn-on probe for localizable detection of fluoride ions, was designed, synthesized and fully characterized by ¹H NMR, ¹³C NMR and HRMS. As a chemogenic fluoride probe, the tert-butyldiphenylsilane moiety of HPQF can be easily cleaved by fluoride. After spontaneous 1,6-elimination, HPQ molecule was generated to emit fluorescence under the excitation light. Further study shows that HPQF exhibited high selectivity and sensitivity for detection of fluoride. In addition, HPQF was utilized for the detection of fluoride in living cells.     

A retrievable and highly selective fluorescent probe for monitoring sulfide and imaging in living cells

A novel selective fluorescent chemosensor based on an 8-hydroxyquinoline-appended fluorescein derivative (L1) was synthesized and characterized. Once combined with Cu(2+), it displayed high specificity for sulfide anion. Among the various anions, only sulfide anion induced the revival of fluoresecence of L1, which was quenched by Cu(2+), resulting in "off-on"-type sensing of sulfide anion. What's more, the sensor was retrievable to indicate sulfide anions with Cu(2+), and S(2-), in turn, increased. With the addition of Cu(2+), compound L1 could give rise to a visible pink-to-yellow color change and green fluorescence quenching. The resulting yellow solution could change to pink and regenerate to green fluorescence immediately upon the addition of sulfide anion; however, no changes were observed in the presence of other anions, including CN(-), P(2)O(7)(4-), and other forms of sulfate, making compound L1 an extremely selective and efficient sulfide chemosensor. The signal transduction occurs via reversible formation-separation of complex L1Cu and CuS. What's more, the biological imaging study has demonstrated that the chemosensor can detect sulfur anions in biological systems at a relatively low concentration.     

A highly selective fluorescent probe for the detection and imaging of peroxynitrite in living cells

We have found a specific reaction between ketone 1 and peroxynitrite (ONOO-), rather than other reactive oxygen species and reactive nitrogen species generated in the biological system. On the basis of this reaction, we have successfully developed a new fluorescent probe HKGreen-1, which is highly selective for the detection of peroxynitrite in living cells. Before the oxidation with peroxynitrite, the dichlorofluorescein part is masked and the probe is nonfluorescent. However, upon reaction with peroxynitrite, the fluorophore is released, resulting in strong enhancement in fluorescence intensity.